Using an attribute editable ice for lines inside an editable of ice for the link attribute

Similar Questions

• ASA 5510 VPN - using a public IP address for the local network

  Hello, I have a problem which is probably very simple, but I can't seem to understand.

  I set up a site IPsec connection to another with a company, something I've done many times before without a problem. I use ASDM to configure this, because it is quick and painless, usually.

  We have one number of other site-to-site currently configured connections and works very well on this ASA, these are configured with the "Protected network - LAN" configured with the IP private of hosts within our network, we want to make available through the separate tunnels. This includes the configuration setting on our ASA for each connection to "guests aside ASA exempt from NAT.

  With this new link, however, the company asked us to use a public IP address for the host that we want to achieve through the tunnel. I don't know why, but they demand it. So I added a NAT rule for inside the host and set up the connection with the public IP address under "Local network". During the test to try to reach a host to their side, the tunnel didn't even try to open.

  What is the method here? I don't see where I'm wrong. I'm guessing that the 'host side ASA exempt from NAT' does not require for this, how if the ASA would know which internal host is the public IP address.

  Any ideas?

  Hi Leo,

  The steps are:

  1. Add the policy rule NAT for the specific host.

  2 - define the IP NAT as your LOCAL NETWORK address in the encryption settings.

  3 make sure that there is no rule NAT exempt for this host to the specific destination.

  What happens if you run a package tracer?

  Thank you.

• Can I use an I tunes card for the mini game on my I pad?

  Can I use an I tunes card for the mini game on my I pad?

  You should be able, unless you're an Organizer from family to family sharing (an organizer can not use gift cards). Buy the card on your account (this is the account that has downloaded the games on your iPad?): Redeem iTunes and Apple music gifts and codes - Apple Support

  Purchases should automatically use the balance of your account

• Is it safe to use Safe Mod with networking for the use of the computer every day?

  Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you

  Hello, Winston,

  It is actually for troubleshooting only.

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.

  Wireless network adapter may not work when you use the Option "Safe Mode with network.

  http://support.Microsoft.com/kb/305616

  Safe mode disables most of the processes and services running. These services include the Windows Update service. »

• I have an invisible background and I want to just use a bursh paint to draw lines thick som to create a cache. the brushes do not seem to paint.

  I have an invisible background and I want to just use a bursh paint to draw lines thick som to create a cache. the brushes do not seem to paint.

  Hi Normannixon2,

  Could you please confirm whether the background is Transparent or white.

  Also when you use the Paintbrush tool, please check the opacity and flow of the Brush tool.

  Kind regards

  Tanuj

• The cloud of document can be used as a network location for the sending of request for comments to a greater number of commentators?

  The cloud of document can be used as a network location for the sending of request for comments to a greater number of commentators?

  I manage not rather these comments by e-mail, and we do not have a webdav server that is accessible from the outside.

  Thank you

  Hi Jeff,

  No you cannot use Doc Cloud for this purpose. For detailed information, please see the following link: using Acrobat | Prepare a PDF review

  Kind regards
  Rahul

• How to get the authentication of the user for the link of the Questionnaire Survey Builder?

  How to get the authentication of the user for the link of the Questionnaire Survey Builder?

  Page 100

  The content can be dynamic and the link is unique to the participant, but they all go to Page 100, which has an alias of Q. The link is unique because of the value of the request passed not because of the page.

  Thank you

  -Jorge

• Alternative text for the link

  I was wondering, how can I do an 'Alt' box appear for the links, so I can enter an alternative text for my links without adding in the code every time?

  -Very well, thank you. I don't know that I'll forget to enter the Alt tag for some links, so some will have it and others don't.

• How use IMAQ extract Contour VI for the outline of an image of fine-art SEM?

  Hi, I tried to use the IMAQ extract Contour VI to get an outline of the cutting edge of a tool. After processing the SEM image into a binary, it is sent to the extracted IMAQ Contour VI, but it fails to find the outline and send the message "error 1074395732 occurred in the extracted IMAQ Contour-

  Possible reasons: IMAQ Vision: no curves were found in the image. ». I guess that the problem may be the parameters chosen for the extration of the curve of entry. The Vi and the image are attached below.

  Hi Ahryman,

  Please use the Forum of National Instruments.

  IMAQ extract Contour does not work with binary images, but with pictures of U8. You can look that up in the detailed VI help page.

  In your VI, just delete the line and that's all.

  I have attached the image result.

  Best regards, Topper Harley

  

• After Effects using 5 GB of ram for the preview of a video 12 MB in size without any effect.

  I after effects CC 2015 to date.

  My terms of reference are:

  CPU: i5 6500 3.2 Ghz

  8 GB of RAM: DDR4-2133 MHz RAM

  Storage:256 GB SSD (on which After Effects is installed)

  1 TB HARD DRIVE

  Graphics card: GeForce GTX M 970, 6 GB

  All the drivers are up to date.

  The problem is: I create a new project and import a video in. The video has a full HD resolution and is 12.5 MB in size. First of all, it takes a minute to play the video of RAM so that it begins to play in real time. Then, the video is 30 frames per second, but reading the preview, he plays at 60 frames per second (frame rate is defined as 30 fps in composition settings). I saw the RAM usage in the Task Manager and After Effects using 5 GB of RAM. Then I applied an effect and the CPU usage rose to 100% and it took about 5 minutes to get the applied effect, and after that, After Effects crashed.

  I'm quite new to After Effects, but I'm also a tech geek. I tried to play in the settings but it didn't help. I also searched on google and forums, but to no avail. This problem is essentially what makes the software unusable for me. Please HELP!

  You do not want to edit long movies in AE. After effects is NOT video editing software.  A non-linear editing (NLE) like Premiere Pro is for editing photos to tell a story. AE is for compositing, Visual effects and graphic cartoons. It is for the creation of clichés that you then use in an NLE.

  I suggest to get at least 16 GB of RAM to work with AE, but your system should work as it is. You will need to learn to manage your memory well and to get a glimpse at lower resolutions where possible.

  Now, as to your original question. AE is not simply to play a video stream, as does a NLE. After effects (such as other software based compositing on pixels) with completely decompressed frames. When you put a video compressed in a composition, the size of the original video file has no effect on the size of the images that works with After Effects. After effects unpacks this video and works internally with a full, uncompressed resolution, frames. AE calculates the values of each pixel in each image, comes with a new pixel and then reads these pixels. Who is?

  In fact, since you have so little RAM and the processor is not either, it may be a good idea to convert your video files highly compressed in a good intermediate codec for the shots, that you intend to use in AE. QuickTime with the PNG codec would be a decent choice. This way AE doesn't have to do a ton of work to decompress images behind the scenes until you can even work with him.

• How can I stop Firefox opening iTunes or ask me which application I want to use for the links from the itms/itmss?

  When I opened iTunes App Store link, Firefox wants to automatically open iTunes. In Options > Applications, I found the itms and itmss content types, which causes this behavior. I can change "always ask them", but when I do, I get a automatic every time I open the link asking me to choose between "iTunes" or "Choosing an Application." To avoid future pop ups, I check "Remember my choice for itmss links" but only after selecting iTunes or another application. There should be a third option there for 'doing nothing '. Is it possible to tell Firefox to ignore completely the content of the itms/itmss?

  COR - el said

  Is there some prefs the protocol handler if you are looking for the topic: config page?

  • Network.protocol - handler.

  You just solved my problem - there is no Network.protocol - handler.external. itms or itmss prefs, so I added the Boolean values:

  Network.protocol - handler.external.itms
  Network.protocol - handler.external.itmss

  Set to false and voila! No iTunes, don't ask me what program to use.

• the use of two meters: one for the generation of regenerable impulses, one as a counter

  I'm new on use the counters. I use an NI PCI-6110 multifunction data acquisition card. I want to count a digital input (on the connector of the PFI 2) pulse and also using the entrance to trigger another counter to generate impulses. So I configured the first counter (task 1) to generate digital pulses with PFI2 as a source of relaxation and redeclenchables award; and set up the other counter (task 2) to count the number of edges of the digital signal with.... But after the two tasks began, the first task was an error 50103 (or the possible reasons: NI Platform Services: the specified resource is reserved.) The operation could not be performed as indicated.) The block diagram is attached. Thank you.

  Your Board uses very-old-in-electronic-standards-DAQ - STC a smart meter that requires a little secretly * two * counters work together to make a finite pulse train.  He is not actually secret if you read the right parts to the right documentation, but it's not hard to miss if you are unsure you should look.  It has been a while since I've done a lot with these counters, but I have this nagging thought that they may not support redeclenchables finishes pulse train generation at all.  I would caution you to at least check this.

  In any case, it is the reason for the error.  The finite impulse generation task uses only the counter that you specify, but there was also this one to help.  A couple of new generations of smart meter (NOR-TIO, DAQ-STC2) continues to have this limitation, but the * more * recent it is no longer made.

  X series boards use the chip "NOR-STC3" that give you 4 programmable counters by the user instead of 2 * AND * everyone can generate pulse trains finish without using a help desk.  You may want a pair of them upward with your 6110, assuming that you need simultaneous sampling analog 6110's capabilities.

  -Kevin P

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Use two providers of identity for the 12 c ADF

  Hi all

  We were using sql authentication in local weblogic server up and there the users and user roles stored in the DB tables. We have an obligation to authenticate to active directory MS and then to recover the business roles in the local database for the same user.

  
  

  We use 12.1.3 jdev...

  No matter who came across this requirement? Is there a better way to authenticate on a directory and extract business besides roles?

  Thank you

  found this blog, closely related to the problem we are facing.

  https://oralublog.WordPress.com/2013/11/17/ADF-tutorial-how-to-map-roles-to-user-when-logging-in/

  Thanks for the pointers

• Connector using Siebel-OPA BO mapping for the large amount of data

  Hello
  
  We intend to use the approach to mapping of BO to pass several values of OPA to Siebel, which we intend to store in the form of several records in Siebel.
  1. it is recommended to do by using BO mapping?
  2. mapping IO would be preferable, given the size of the data concerned?
  
  Thank you

  nilskil wrote:
  Hello

  We intend to use the approach to mapping of BO to pass several values of OPA to Siebel, which we intend to store in the form of several records in Siebel.
  1. it is recommended to do by using BO mapping?
  2. mapping IO would be preferable, given the size of the data concerned?

  Thank you

  For the passage of a lot of data between OPA and Siebel, I highly recommend using a map of IO. You can find more quickly and also, return xml IO will be easier to deal with.

  See you soon
  Frank