Use two providers of identity for the 12 c ADF

Similar Questions

• How I find myself with two passwords to iCloud for the same account?

  How I find myself with two passwords to iCloud for the same account?

  For security reasons, I only use iCloud for Contacts and "find my iPhone".

  Several months ago Apple forced me to change my password to iCloud.  So I did this.   In the last months, I used successfully the new password to 10 or 12 times when asked without problem.

  However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.

  Then, operating under a hunch, I decided to enter my old password to iCloud. It worked?  I'm confused about this, any ideas would be appreciated.

  I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.

• Why I have two different execution plans for the same query on two different servers

  Hello everyone.

  I need your help to solve the problem quickly.

  In a nutshell, we have two servers that have the same version of Oracle RDBMS (11.2.0.4 EE). One of them for purposes of development and another is a production one.

  We have therefore two different execution plans for the same query executed on both servers. The only case of execution is OK and another is too slow.

  So I have to slow down the work of query using the same scheme to explain that young.

  Fence wire.

• Can I use an I tunes card for the mini game on my I pad?

  Can I use an I tunes card for the mini game on my I pad?

  You should be able, unless you're an Organizer from family to family sharing (an organizer can not use gift cards). Buy the card on your account (this is the account that has downloaded the games on your iPad?): Redeem iTunes and Apple music gifts and codes - Apple Support

  Purchases should automatically use the balance of your account

• Is it safe to use Safe Mod with networking for the use of the computer every day?

  Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you

  Hello, Winston,

  It is actually for troubleshooting only.

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.

  Wireless network adapter may not work when you use the Option "Safe Mode with network.

  http://support.Microsoft.com/kb/305616

  Safe mode disables most of the processes and services running. These services include the Windows Update service. »

• ASA 5510 VPN - using a public IP address for the local network

  Hello, I have a problem which is probably very simple, but I can't seem to understand.

  I set up a site IPsec connection to another with a company, something I've done many times before without a problem. I use ASDM to configure this, because it is quick and painless, usually.

  We have one number of other site-to-site currently configured connections and works very well on this ASA, these are configured with the "Protected network - LAN" configured with the IP private of hosts within our network, we want to make available through the separate tunnels. This includes the configuration setting on our ASA for each connection to "guests aside ASA exempt from NAT.

  With this new link, however, the company asked us to use a public IP address for the host that we want to achieve through the tunnel. I don't know why, but they demand it. So I added a NAT rule for inside the host and set up the connection with the public IP address under "Local network". During the test to try to reach a host to their side, the tunnel didn't even try to open.

  What is the method here? I don't see where I'm wrong. I'm guessing that the 'host side ASA exempt from NAT' does not require for this, how if the ASA would know which internal host is the public IP address.

  Any ideas?

  Hi Leo,

  The steps are:

  1. Add the policy rule NAT for the specific host.

  2 - define the IP NAT as your LOCAL NETWORK address in the encryption settings.

  3 make sure that there is no rule NAT exempt for this host to the specific destination.

  What happens if you run a package tracer?

  Thank you.

• The cloud of document can be used as a network location for the sending of request for comments to a greater number of commentators?

  The cloud of document can be used as a network location for the sending of request for comments to a greater number of commentators?

  I manage not rather these comments by e-mail, and we do not have a webdav server that is accessible from the outside.

  Thank you

  Hi Jeff,

  No you cannot use Doc Cloud for this purpose. For detailed information, please see the following link: using Acrobat | Prepare a PDF review

  Kind regards
  Rahul

• MAC OS Yosemite - CS6 - earlier, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's all

  -At the time, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's a window without having to be full screen mode? I managed to go a few times like this, but right now it's really annoying me. Help!

  

  Just drag the small window up just under the toolbar, you will see the area highlighted, and when you drop the file should anchor.

• How use IMAQ extract Contour VI for the outline of an image of fine-art SEM?

  Hi, I tried to use the IMAQ extract Contour VI to get an outline of the cutting edge of a tool. After processing the SEM image into a binary, it is sent to the extracted IMAQ Contour VI, but it fails to find the outline and send the message "error 1074395732 occurred in the extracted IMAQ Contour-

  Possible reasons: IMAQ Vision: no curves were found in the image. ». I guess that the problem may be the parameters chosen for the extration of the curve of entry. The Vi and the image are attached below.

  Hi Ahryman,

  Please use the Forum of National Instruments.

  IMAQ extract Contour does not work with binary images, but with pictures of U8. You can look that up in the detailed VI help page.

  In your VI, just delete the line and that's all.

  I have attached the image result.

  Best regards, Topper Harley

  

• I also get the error code 80070005 when you try to use Windows Update to check for the updates

  I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

  Hello

  1. what Microsoft fixit did you run?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• After Effects using 5 GB of ram for the preview of a video 12 MB in size without any effect.

  I after effects CC 2015 to date.

  My terms of reference are:

  CPU: i5 6500 3.2 Ghz

  8 GB of RAM: DDR4-2133 MHz RAM

  Storage:256 GB SSD (on which After Effects is installed)

  1 TB HARD DRIVE

  Graphics card: GeForce GTX M 970, 6 GB

  All the drivers are up to date.

  The problem is: I create a new project and import a video in. The video has a full HD resolution and is 12.5 MB in size. First of all, it takes a minute to play the video of RAM so that it begins to play in real time. Then, the video is 30 frames per second, but reading the preview, he plays at 60 frames per second (frame rate is defined as 30 fps in composition settings). I saw the RAM usage in the Task Manager and After Effects using 5 GB of RAM. Then I applied an effect and the CPU usage rose to 100% and it took about 5 minutes to get the applied effect, and after that, After Effects crashed.

  I'm quite new to After Effects, but I'm also a tech geek. I tried to play in the settings but it didn't help. I also searched on google and forums, but to no avail. This problem is essentially what makes the software unusable for me. Please HELP!

  You do not want to edit long movies in AE. After effects is NOT video editing software.  A non-linear editing (NLE) like Premiere Pro is for editing photos to tell a story. AE is for compositing, Visual effects and graphic cartoons. It is for the creation of clichés that you then use in an NLE.

  I suggest to get at least 16 GB of RAM to work with AE, but your system should work as it is. You will need to learn to manage your memory well and to get a glimpse at lower resolutions where possible.

  Now, as to your original question. AE is not simply to play a video stream, as does a NLE. After effects (such as other software based compositing on pixels) with completely decompressed frames. When you put a video compressed in a composition, the size of the original video file has no effect on the size of the images that works with After Effects. After effects unpacks this video and works internally with a full, uncompressed resolution, frames. AE calculates the values of each pixel in each image, comes with a new pixel and then reads these pixels. Who is?

  In fact, since you have so little RAM and the processor is not either, it may be a good idea to convert your video files highly compressed in a good intermediate codec for the shots, that you intend to use in AE. QuickTime with the PNG codec would be a decent choice. This way AE doesn't have to do a ton of work to decompress images behind the scenes until you can even work with him.

• Two questions on ASM for the Installation of the grid

  Version of grid Infrastructure: 11.2.0.3

  Platform: Oracle Enterprise Linux 5.6

  Question1.

  Oracle: dba will own our grid software (not network user). What should be the permission set for the LUN (/ dev/sda1,..) before the installation of the grid?

  Question2.

  Currently shared LUNS appear in the form

  / dev/sdb.

  / dev/sdc.

  / dev/sdd

  is a single partition must be created before LUNS to ASM?

  For example, I should choose p (primary partition) below. Right?

  # fdisk/dev/sdb

  Device contains a table of the MS-DOS partitions, valid Sun, SGI, or OSF disklabel

  The construction of a new partitioning BACK with disc 0x8b157fd2 identifier.

  Changes will remain in memory only, until you decide to write them.

  After that, of course, the previous content is not recoverable.

  WARNING: invalid indicator 0 x 0000 partition table 4 will be corrected by w (rite)

  WARNING: The DOS compatible mode is discouraged. It is strongly recommended to

  off mode (command 'c') and change the display units to

  sectors (command 'u').

  Command (m for help): c

  Indicator of compatibility BACK is not defined

  Command (m for help): u

  Change of units of display/entry to the sectors

  Command (m for help): n

  Control action

  extended e

  p primary partition (1 - 4).

  Check step 5 here. You use oracleasm utility that changes the permission.

  Infrastructure of network for a stand-alone server installation

  Ta

  JAG

• How can i two lists drop-down for the same column in OBIEE Dashboardprompt?

  Hello
  
  I need a report for a specific date range. I have to add 2 drop-down lists in the dashboardprompt for the same startdate and enddate column and the report must be filtered accordingly.
  
  I can't add two drop-down lists in the DATE column in the same dashboardprompt.
  
  How can I achieve this?
  
  Can anyone help?

  Hello

  You should be able to achieve the desired result by setting the operator for the column ' is between ' when you set the prompt.

  Kind regards
  Mark

• Connector using Siebel-OPA BO mapping for the large amount of data

  Hello
  
  We intend to use the approach to mapping of BO to pass several values of OPA to Siebel, which we intend to store in the form of several records in Siebel.
  1. it is recommended to do by using BO mapping?
  2. mapping IO would be preferable, given the size of the data concerned?
  
  Thank you

  nilskil wrote:
  Hello

  We intend to use the approach to mapping of BO to pass several values of OPA to Siebel, which we intend to store in the form of several records in Siebel.
  1. it is recommended to do by using BO mapping?
  2. mapping IO would be preferable, given the size of the data concerned?

  Thank you

  For the passage of a lot of data between OPA and Siebel, I highly recommend using a map of IO. You can find more quickly and also, return xml IO will be easier to deal with.

  See you soon
  Frank

• Configure the virtual server to 2003 to use two physical network adapters on the host

  I have a virtual server (Server 2003) that I'm trying to point two virtual NETWORK card to two different physical NICS on the host computer.  The two network adapters on the host are on separate networks, and I can't get virtual network cards to connect properly.

  I use VMWARE Server 2 with the virtual network manager.  All good instructions would be greatly appreciated.

  Thank you

  Run the virtual network Editor.  Disable the automatic bypass.  Then, specify which of your physical NIC to the bridge to VMnet0 and specify the other physical NETWORK adapter on one of the switches (2-7, 9) unused VMnet.  In the settings of your virtual machine, select a virtual NETWORK adapter to be filled, and a 2nd we use custom connection and specify what VMnet switch to use (the one you filled the 2nd NETWORK card physical to).