Using CFCONTENT to deliver the word document

Similar Questions

• Scanner Epson DX 4200 cannot deliver personalized to the Word document scanning

  I have recently updated from a rather old Dell Windows XP computer to a new model of Zoostorm 7873-1200 with Windows 7.  When I use the Word "Insert" tool to insert a scan of my scanner Epson DX4200, I find that if I select "Custom Scan" the forecast and custom scanning seem to work perfectly and allow me to select the area on the preview scan, but the analysis itself does not appear in the Word document.  However, if I start by selecting "Scan" instead of "Custom Scan", the scanned image of the entire page, including the entire region, I'm not, is transferred successfully to the word.  When I had XP, these two options worked.  How can I get the "Custom Scan" option works on Windows7?

  William Butler

  Hello Niranjan,

  Thank you very much for you encourage them to respond.  I've used the same scanner with Windows XP before and had no problem.  The driver for Windows 7 has been installed since the site Web of Epson.

  Since posting my request custom scanning suddenly said to work on the Windows 7 computer without any additional intervention by me.   It's completely inexplicable that my wife and I as well tried several times without success, before asking for help.  I can only hope that his recovery is permanent.

  Thanks for making me aware of the compatibility mode.  I see that this could be a valuable mechanism.

  Best wishes

  Bill Butler

• After downloading my file from the word document is mostly gibberish.  Why? the service used exportPDF

  After downloading my file from the word document is mostly gibberish.  Why? The service used "exportPDF.

  Hi shelbyrn,

  The quality of conversion is really depends on the quality of the original PDF file. Please see Will Adobe ExportPDF convert text and shape... | Adobe Community.  Do you know what who or how the PDF was created?

  You can have better luck by disabling OCR as described in this paper: How to disable the optical character recognition (O... |) Adobe Community. (Note, however, this is option is is not optimal if the PDF file is created from a scanned document, you wish to OCR enabled to convert the text from the image in the PDF file to editable text).

  Best,

  Sara

• ActiveX slider at the end of the word document

  Hi all
  I work with LabView 2014 and MS Word 2007

  Using ActiveX I managed to copy a Word document template required sections (tables/images NOT text) to the Clipboard. I checked this manually by pasting the Clipboard into a new word document.

  However, I need programmatically paste the contents of the Clipboard at the end of a word document, but cannot find a way to set the cursor position to the end of the word document ready to paste using activex. Does anyone know how to set the position of the MSWord cursor at the end of the document using ActiveX?

  Thanks in advance.

  Thank you very much James this solution works but.

• Conversion and print a PDF file which is exactly the same as the Word document.

  When I convert a Word 2007 document as a PDF and then print both, the PDF has a much larger margin and declined on each page of the document. How to make PDF file printed with the same margins and the size of the font as the Word document?

  I used (free) cutepdf and Nitro PDF Pro in both Office 2007 and Office 2010 and you haven't noticed the problem you mention, but I didn't have the need to compare the results of Word with the pdf regarding my purposes the output pdf has been fine.

• Add the Word Document to the dashboard

  Hi Experts,
  
  I have to build a dashboard containing a Word document. This Word document is updated frequently by business users.
  
  I use 'Link and Image' in the dashboard after loading the Word document in the directory of resources. The URL of the link looks to ' / analytics/res/Help_Tips_Basic.doc'.
  
  The disadvantage of this approach is that whenever changes to the document, the professional user should ask the system administrator to download the document on the Unix server.
  
  The ideal approach would be that the professional user can download the Word Document in the catalog. However I can't get the link right. I use OBIEE 11.1.1.5.
  
  Any suggestions?
  
  Thank you very much
  
  Shi-ning

  Just upload your Word, excel, pdf, txt, etc. in webcatalogs (catalog of Download Manager - via presentation services then)
  then call using downloadFile & path
  ex: http://localhost:9704/analytics/saw.dll?downloadFile&path=text.pdf

  Note:
  If any sapce b & w the path of the folder to use %20 in the url of tha
  If / in the path use % 2F in this 100% URL it will work

  Visit this link
  http://total-bi.com/2011/02/external-files-OBIEE-dashboard/

  If brand pls help

  Published by: VIEREN Srini December 3, 2012 16:09

• link to the word document

  Hi guys,.
  
  Can someone give me a step by step guide how to create a link to a word document. I want to create a link in a report which will link to the word document based on the value of the link... I have a list of server names, the name of each server has a server specification "word document" I want to make a link to the specific document depending on what the name of the server is in the report...
  
  
  Thanks in advance
  
  Stefan

  This can be done using the data in the report - will be assessed for each line:
  

  
  
  select case when col1 = 'server1'
  
  then col4
  
  whencol1 = 'server2'
  
  then col5
  
  else col6
  
  end doc_link
  
  from my_table
  
  

  There is a link to the CASE statement in the Oracle documentation. Our doc can be a little confusing, but it would be good for you to get a better understanding of sql tutorials intro and obes.

  -Sharon

• HP Officejet Pro 8610: hp 8610 not printing images inserted into the word document

  I tried everything I know to do.  I have a word document that I inserted a photo in and it keeps cutting off my photos.  This is also when I insert a clip art image.  I downloaded new drivers and everything.  I do not lose any information on my file with the exception of the part of the image to the break.  I tried to resize and crop the image.  That did not help either.

  @ljpereira44

  Ok.. A few more ideas...

  Follow him requires a recent Version of Windows - newer than XP - and you run at least Office Word 2007.

  ==================================================

  WordPad

  Copy the document in WordPad, to print the file and verify the results

  --------------------------------------------------------------------------------------

  Replace Images

  Open the Word document > right click on one of the Images > edit image > >

  Change the picture to the Image even where it is stored on your computer / Cloud

  --------------------------------------------------------------------------------------

  Save / print to PDF

  • If you did not, update your Adobe Reader Abobe Reader DC
  • Save the Word document in PDF format
  • Print the PDF file saved as "Real" / "Shrink to fit", check the results of each

• Why can't I print the word documents that have been previously registered? I never had problems before

  Why can't I print the word documents that have been previously registered? I never did have any problems before, im no ace with a computer still able to do.

  could this laptop have updated the windows version? If yes how to say if in windows 7 or 10? any help is welcome and appreciated

  I suggest that you uninstall and reinstall the printer and see if that makes a difference.

  Let us know if that helps.

• After I exported a PDF (written in Hebrew) in a Word document, the Word document is written in mirror writing, how can I solve this problem?

  After I exported a PDF (written in Hebrew) in a Word document, the Word document is written in mirror writing, how can I solve this problem?

  This is a known bug in Acrobat. The conversion of PDF to Office documents was never designed to deal properly with the languages from right to left like Hebrew, Arabic and Farsi. There is no work around at this point.

  -Dov

• I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand wh

  I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand what is happening? We put it on automatic renewal so I know it's not that we have not renewed this subscription, because we pay automatically.

  Hi olivias,.

  Looks like there may be some confusion on your system which application should be associated with PDF files. You can reset the file name associations by following the steps described in these articles (depending on your operating system):

  How to change the default application for a file type. Macworld

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  Please let us know if you have any additional questions.

  Best,

  Sara

• Send the word document as a pdf

  I have a word document that I need to send a pdf document: How can I do this

  I use a PDF Converter driver found on the internet. Install it and it becomes a selectable converter option. Then you can convert PDF files to many forms in any program at all, including Adobe Acrobat. Just to open a PDF file, select convert and one shape you want, then you can make the pdf in word, conversion, and vice versa, the task will be finished in a few seconds. If you have not found a good choice, you can have a try. Best wishes.

• Need to open a page in the Word Document

  Original title: I need to know how to open a page in the word rather than the media center

  Whenever I try to open a link I find myself on the media center and I want to open the page as a word document.

  Hello

  Perform the steps from the link below and see if it helps.

  Change the programs that Windows uses by default (Windows Vista)

  Hope this information helps.

• How can I copy, paste the Word document in Adobe Reader PDF?

  A customer is not using Microsoft Word, but type the text for my editing in Adobe PDF. Too many changes, too heavy for me. After the PDF to Word conversion, I change using different colors of ink. How can I copy, cut, paste edition WORD document into a PDF? Other than using "trombone" or features "attachments"?

  With Adobe Acrobat Reader, you can not. At the very least, it requires the full version of Acrobat, and even in this case, it can be difficult.

  Your best bet is to do all the editing of the original document (not the pdf) and then create a new pdf from that.

• The Word Documents to PDF conversion loses header

  OK, so a two pages of Word document (2010) with headers on the second page. Using the last update for Adobe Acrobat XI.

  If I print > save to .pdf file, it works fine. However, often combine us multiple files together in a single PDF, so it's annoying to have to do this for each file first.

  If I click with the right button on the files, and then combine or convert to PDF format, the headers to disappear from the top of the second page.

  Can anyone offer any idea?

  You mentioned the print function, but the handset function you mention does not use the impression, but PDF Maker feature. Try to create the PDF from WORD using the Acrobat menu. Which gives the correct result. If this isn't the case, you may have screwed up in the converter settings. You can also check the options for the DOC to PDF in the Edit > options preference (in PDF format). You mention the last XI update, which should give you 11.0.09.