Using configuration FTP server access

Similar Questions

• How can I add changes to the site after the publication, in passing does not by the cat of the company. (I used the FTP server option section directly)

  How can I add changes in a file of Muse after I already pushed to my domain I bought through GoDaddy using the FTP server directly. I'm not BusinessCatalyst and I don't want to. How can I make changes directly from Muse and then direct update to the site? If this isn't an option, how I add administrators browser edition. I have in the browser active editing on the site, but which is insofar as it allows me to get. He actually let me add someone to do or give me a way.

  You can change/update the site directly from Muse through the option publish to publish the Business Catalyst select drop-down list and choose the url for the site.

  https://helpx.Adobe.com/Muse/using/publishing-websites.html#id_83339

  https://helpx.Adobe.com/Muse/how-to/muse-publish-site-business-catalyst.html

  About IBE, you can connect to your site and add site admin users.

  Go to Site Settings > users Admin > invite.

  Thank you

  Sanjit

• DBAdmin to backup using external FTP server

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 cm 0 cm 5.4pt 5.4pt; mso-para-margin: 0 cm; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  Hello

  I'm trying to script an automatic FTP backup of a WCS system using the DBAdmin command from a command-line.

  As the WCS was previously a WLSE it running Linux via the room of WSC-WCS-WLSE-PDB-100 conversion code, it was then perfected and executes 6.0.170.0 Base. Linux version is: 2.6.18 - 8.el5 ([email protected] / * /) (version gcc 4.1.1 20070105 (Red Hat 4.1.1 - 52)) #1 SMP Wed Jan 26 14:15:21 this 2007)

  When I run the command, I get the following:

  [[email protected] / * / bin] remotebackup 10.0.0.1 #./dbadmin.sh test test

  You want a backup report story? (y/n) n

  Report history not to be saved.

  Exception in thread "main" java.lang.IllegalArgumentException: path cannot be empty

  at org.apache.commons.io.FileSystemUtils.freeSpaceOS(FileSystemUtils.java:190)

  at org.apache.commons.io.FileSystemUtils.freeSpaceKb(FileSystemUtils.java:166)

  at com.cisco.server.util.FreeSpaceChecker.freeSpaceGB (unknown Source)

  at com.cisco.server.util.FreeSpaceChecker.checkDirectoriesForBackup (unknown Source)

  at com.cisco.packaging.SelectDirAndBackupDb.backupDatabase (unknown Source)

  at com.cisco.packaging.SelectDirAndBackupDb.backupDatabase (unknown Source)

  at com.cisco.packaging.SelectDirAndBackupDb.backupDatabase (unknown Source)

  at com.cisco.packaging.SelectDirAndBackupDb.remoteDatabaseBackup (unknown Source)

  at com.cisco.packaging.DBAdmin.remoteBackup (unknown Source)

  at com.cisco.packaging.DBAdmin.runMain (unknown Source)

  at com.cisco.packaging.DBAdmin.main (unknown Source)

  [[email protected] / * / bin] #.

  Of ideas where I'm wrong or if someone could suggest an alternative method to save backups WCS in the distance this unit to a different host?

  Thank you

  Found.  Works in mine, because this bug is your code.170 and not the mien.181.

  CSCte81786 remotebackup dbadmin generates errors, do not ftp backup.  

  An upgrade should help

• EA4500 Router FTP Server Security

  I have a general question around the FTP server on the EA4500, is it safe? I don't see any option to use TLS or SSL, or specify only implicit/explicit connections. Is it safe to use the FTP server to the external? Any help appreciated.

  Xuggs,

  When you access your USB remotely through FTP, you send your username and password without encryption. In addition, the files you download and download are transported over the internet without encryption.

  So no, he's not sure. There is risk. How much a risk? I do not know. Obviously, you don't want to keep sensitive information on your USB key and expose it to potential FTP snooping.

  Some people might consider the photos of family on vacation to Hawaii sensitive, while others care.

  The chances of Linksys update firmware to secure FTP support? You have a better chance of winning this Saturday Powerball lottery drawing.

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• Configure the FTP server using the command line

  After IIS FTP server on Vista (or XP) starts the "default FTP Site" has only "read permissions".
  How can I set the FTP server to the CONTROL LINE HELP, to allow 'write' also.

  I believe that access is denied is possible if,
  the law is already assigned has.)
  you do not have administrator rights (b.)

  Anyway, you can avoid the prompt (Y/N) by the presence of echo on the batch file
  echo y | Cacls filename /g username :permission

  Refer to Microsoft KB on How to Use CACLS.EXE in a Batch File .

  -----------------------------------------------------
  Remember to Vote as helpful for others and accept the the proposed Answer if it is relevant to build KB in this Forum.

• Configure an FTP server behind ASA 5505, need some sort of port forwarding

  My company uses a Cisco ASA 5505 Adaptive Security Appliance, and I'm trying to set up an SFTP server which is accessible from the Internet.

  Is it possible to simply configure port forwarding to my FTP port (4610) to the IP with the server, as I would on a simple Linksys router? Or I have to put in place a sort of demilitarized zone?

  Any help would be greatly appreciated.

  No, you do not necessarily have a demilitarized zone, inside works perfectly. I guess you want to use the ip address of the external interface of the ASA for this? If so, it would looks something like this. Where x.x.x.x is the ip address of the inside/private of the ftp server.

  public static 4610 4610 netmask 255.255.255.255 x.x.x.x interface tcp (indoor, outdoor)

  outside_access_in list extended access permit tcp any interface outside eq 4610

  Access-group outside_access_in in interface outside

• PIX 501 to allow access to the ftp server

  Hello

  We have a public ip address of the pix 501 and the other, I want to access the ftp server on the internal network from the outside. I tried to configure the PDM by a static nat, which translate to the address of the FTP to the public address, but then none of the stations networks could out - how can I configure it?

  I would also like to know what ports should I open on the acl for access to the ftp server.

  Thank you, daguech

  Yes, sorry... You must use the unique host for addresses command. The access list is applied to your external interface?

  for example, the command would be:

  Access-group acl_out in interface outside

  Also, can you connect to the local ftp server behind a firewall?

• Security and restricting access to an FTP server

  I did a search here on the forums about this and I wasn't able to find a good topic for my questions yet, if there is a debate currently on the forum, please forgive me and I would be grateful for a link. Anyway, my situation:

  I have an ASA firewall and I have never set up an FTP server for a large-scale network (good in my opinion). I want to ensure that we have the highest security level optimal for FTP and restrict only specific users designated by an ACL. SFTP would be the best option available for the security measures? Should I only use the passive FTP mode and range of ports above 1023 do I open for only 1 or 2 FTP clients at a time? Also if I use passive mode do I need to use FTP protocol control?

  In addition, currently, I'm not sure what files need to be available on our network, but the SFTP server always must be installed in the demilitarized zone?

  Thanks for any advice,-Mark

  To activate the SFTP-server on the computer where the data resides is easy, but far not the safest option.

  There are a few more ways to better ensure that. What about:

  -Place the SFTP-server in the DMZ and let this server access the internal server via a fileshare. If someone takes your SFTP server, so it cannot directly a system in the internal network under its control.

  -If the data display, data cannot be copied or synchronized to the DMZ-SFTP-server once the changes.

  SFTP is based on SSH, so it works entirely on a port which is usually TCP/22.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• How to configure a FTP server and the web and integrate with 5.2 DMM

  Hi all...

  I need to set up an external server only for publishing content to reduce the overhead of the DMM server.

  can someone guide me on how to configure the external server and it intergrate with the DMM 5.2

  Thank you

  semuthu,

  
  

  Notes from the Release Notes:

  
  

  Limitations of compatibility with Microsoft Internet Information Server (IIS)

  DMP who use firmware version 5.2 is compatible with a single version of Microsoft Internet Information Server.

  This supported version is IIS 6.0 for Windows 2003 Enterprise Edition. If you do not have the support for IIS version but

  want your DMP to recover the assets of a Web server, we recommend that you use Apache instead of IIS.

  
  

  
  

  I suggest to use Apache instead of IIS for the Web Server service. IIS can be used as FTP if necessary.

  There are a lot of Documents on the Internet concerning the implementation of Apache and FTP servers.

  
  

  Using Apache with Microsoft Windows

  http://httpd.Apache.org/docs/2.0/platform/Windows.html

  
  

  Quick HOWTO: Ch20: Apache Web Server

  _ http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO: _Ch20_:_The_Apache_Web_Server

  
  

  Once the Web server is configured and operational. You simply record your multimedia content on the Web server

  and then have your DMS assets in the library using an external URL address for its location.

  
  

  If you want to use the external server for other features in the DMM, you can see how to set up

  here:

  
  

  http://www.Cisco.com/en/us/partner/docs/video/digital_media_systems/5_x/5_1/DMM/user/guide/DSM+ETV.html#wp1073210

  Goto the section just below the CNSC & WAAS...

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

  
  

• Unauthorized use of this FTP server (530)

  Hello
  By accessing the Apex, the following message appears:
  "220 serv-tst.
  The unauthorized use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
  220 server FTP serv-tst (Oracle XML DB / Oracle database) loan.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  221 command too long. maximum of 2048 bytes. Good bye. '
  Please help me.

  PauloFlesch wrote:
  Hello
  By accessing the Apex, the following message appears:
  "220 serv-tst.
  The unauthorized use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
  220 server FTP serv-tst (Oracle XML DB / Oracle database) loan.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  530 please login with USER and PASS.
  221 command too long. maximum of 2048 bytes. Good bye. '

  What APEX? Where? How? Why?

• My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

  My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

  Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

  I hope this can help.

• I have reset firefox because of the slow, now it says firefox is configured to use a proxy server refusing connections, what a waste! r

  I am using windows 7 Home premium. Button Firefox connected if slow to get on the internet, so I used the reset button. Now, firefox is configured to use the proxy server refusing connections, unreal... I hope you can help soon... Thank you, Donna

  you are the very welcome!

  It should be possible to select what happens when you click on an e-mail link in the applications Panel in the firefox options. For more information, see change the program used to open e-mail links

• Firefox blocks access on port 21 on my FTP server. How to remove the block?

  FireFox crashes me access to my FTP server at home on port 21. There must be a relatively simple way to remove this block. Where and how can I remove it?

  See also:

  • http://www.Mozilla.org/projects/netlib/PortBanning.html
  • http://KB.mozillazine.org/network.Security.ports.banned.override

• I do not use a proxy server to connect to internet, but Firefox is automatically configured to use the loopback address.

  I have a direct connection to the internet and that you do not use a proxy server. Every few weeks, Firefox will automatically reset itself to be configured to use a proxy to the loopback address (127.0.0.1). Manually change to 'No proxy' works, but I have to do so every time I open the browser or even a new tab. The only solution I can find is to create a new profile that gives me a new, clean install of FF, but then I lose all my Add-ons. This has happened several times now and it's extremely frustrating. I have scanned for malware, but have not found any problems.

  Hello rjlasser, first of all please make sure that none of your extensions is the origin of the problem (some circumvention of censorship of youtube addons do also use proxies for example).

  Otherwise please see How to fix the preferences that will not save for common solutions.