Unauthorized use of this FTP server (530)

Similar Questions

• Copy existing attached file of database to the FTP server.

  Attachments in our TAM system are currently stored in the database now occupy almost 40% of the database. A decision was taken to transfer these attachments from the database to the file system.
  
  I changed the definition of the URL to point to an FTP server instead of the RECORD://PSFILE_ATTDET delivery, now my question is how to migrate existing attachments from basic to this FTP server.
  
  Book PT CopyAttachments utility takes a very long time and I want to do this in small batches (say through a motor approx.) of my source (db) destination (ftp server). Any ideas?

  Create an engine of the application (for example) and use the GetAttachment build - in function to download a file of source record://PSFILE_ATTDET on the file of the application server/processcheduler system.
  After that use PutAttachment to transfer files from filedir appserver/processcheduler to the ftp site.

  Code would be something like this:

  local & rsPSFILE_ATTDET rowset
  & rsPSFILE_ATTDET = CreateRowSet (record. PSFILE_ATTDET);
  & rsPSFILE_ATTDET. Fill()

  i = 1 & at & rsPSFILE_ATTDET. ActiveRowCount
  SYSIXCOL = & rsPSFILE_ATTDET(&i).getrecord (1). SysFileName.value;
  & ret = GetAttachment ("record://PSFILE_ATTDET", & sysfile, [MakeUpALogicalFileName]);
  & ret = PutAttachment ("your ftp site", [GenerateNewSysFileName], [MakeUpALogicalFileName]);
  -end;

  GenerateNewSysFileName is usually a combination of datetime UuidGen() & %.

  You can of course also use CopyAttachments, except that with code above, you have more control of wich batch of transfer by adding a where clause for the instruction of filling clause.

  Published by: Hakan Biroglu, February 11, 2012 19:23

• I'm trying to upload my site using ftp, but for some strange reason, the ftp server box becomes red, even if the name is correct. everyone knows about this problem?

  I'm trying to upload my site using ftp, but for some strange reason, the ftp server box becomes red, even if the name is correct. everyone knows about this problem?

  Hello

  I would ask to share with you the screenshot of the box which becomes red.

  Concerning

  Vivek

• Configure the FTP server using the command line

  After IIS FTP server on Vista (or XP) starts the "default FTP Site" has only "read permissions".
  How can I set the FTP server to the CONTROL LINE HELP, to allow 'write' also.

  I believe that access is denied is possible if,
  the law is already assigned has.)
  you do not have administrator rights (b.)

  Anyway, you can avoid the prompt (Y/N) by the presence of echo on the batch file
  echo y | Cacls filename /g username :permission

  Refer to Microsoft KB on How to Use CACLS.EXE in a Batch File .

  -----------------------------------------------------
  Remember to Vote as helpful for others and accept the the proposed Answer if it is relevant to build KB in this Forum.

• How can I add changes to the site after the publication, in passing does not by the cat of the company. (I used the FTP server option section directly)

  How can I add changes in a file of Muse after I already pushed to my domain I bought through GoDaddy using the FTP server directly. I'm not BusinessCatalyst and I don't want to. How can I make changes directly from Muse and then direct update to the site? If this isn't an option, how I add administrators browser edition. I have in the browser active editing on the site, but which is insofar as it allows me to get. He actually let me add someone to do or give me a way.

  You can change/update the site directly from Muse through the option publish to publish the Business Catalyst select drop-down list and choose the url for the site.

  https://helpx.Adobe.com/Muse/using/publishing-websites.html#id_83339

  https://helpx.Adobe.com/Muse/how-to/muse-publish-site-business-catalyst.html

  About IBE, you can connect to your site and add site admin users.

  Go to Site Settings > users Admin > invite.

  Thank you

  Sanjit

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• Using configuration FTP server access

  All of our users internally connect to internet through firewalls pix 515e.

  I install an ftp server on the IP 192.168.0.49 and already configured to access the PIX. Users within the office using the 192.168.0.49 ip address to access the ftp site so that users outside of the use of the ftp.mmg field - me .com to access the site.

  The field ftp.mmg - me .com is linked to our public ip address.

  The problem is only users inside can use the above mentioned internal ip address. If they try to connect to the ftp via the ftp.mmg field - me .com, there is still time. So, how I can configure the firewall to allow users inside to use the domain name to connect to the ftp?

  It's the command that I published to configure the firewall for ftp access:

  static (inside, outside) 80.227.104.242 tcp ftp 192.168.0.49 ftp netmask 255.255.255.0 0 0

  Hello

  You have two options here-

  -If you want the command alias so your syntax should be as follows:

  alias (Inside) 192.168.0.49 80.227.104.242 255.255.255.255

  -If you run PIX 6.2 or higher, my suggestion would be to edit your existing static with the keyword "dns", stated as follows: -.

  static (inside, outside) 80.227.104.242 tcp ftp 192.168.0.49 ftp dns netmask 255.255.255.0

  Thank you

  Renault

• This print server is useful?

  Hello

  I have a hp all in one 1210 for five years.

  Now, I want to say, 2 years ago I bought a laptop also hp .

  So, I need to know if this print server would work to make it wireless, because whenever I want ti to feel something that I must go to the printer with the laptop, it is so very annoying that.

  This print server IS compatible with my hp 1210

  http://www.DealExtreme.com/details.DX/SKU.34256

  people give good reviews on this page.

  Thanks for the tips.

  If you use the HP PSC 1210, then Yes, it is compatible. See the link below for full compatibility list.

  http://support.HP.com/us-en/document/c01079555

• How to choose a particular directory in the connection to the FTP server window. He used to have she and her party?

  How to choose a particular directory in the connection to the FTP server window. He used to have she and her party?

  The user interface has changed a bit. The folder field is now in the screen that follows to connect to the FTP server.

  Adobe help Muse | Download a Site from Muse Adobe on a third-party hosting service

  Abhishek

• The configuration files are used to create this cache server?

  I start a cache server by running the $COHERENCE_HOME/bin/cache-server.sh file. But I don't how it is configured.
  The configuration files are used to create this cache server? How do I know?
  I check the contents of the cache-.sh file.
  In my view, the config.xml file - cache-coherence, consistency-pof - config.xml file and leader tangosol-coherence are used, no?

  After the start of a cache server, view the output carefully and you will find the configuration files are used. For example, the configuration files are displayed in bold background in the following text:

  F:\coherence\coherence\bin>cache-server.cmd
  java version "1.6.0_16"
  Java(TM) SE Runtime Environment (build 1.6.0_16-b01)
  Java HotSpot(TM) Server VM (build 14.2-b01, mixed mode)
  
  2009-11-30 22:46:06.468/1.547 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-co*
  *herence.xml"*
  2009-11-30 22:46:06.484/1.563 Oracle Coherence 3.5/459  (thread=main, member=n/a): Loaded oper
  ational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *tangosol-cohere*
  *nce-override-dev.xml"*
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/tangosol-coherence-override.xml" is not specified
  2009-11-30 22:46:06.500/1.579 Oracle Coherence 3.5/459  (thread=main, member=n/a): Optional conf
  iguration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5/459
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  2009-11-30 22:46:07.468/2.547 Oracle Coherence GE 3.5/459  (thread=main, member=n/a): Loaded c
  ache configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/ *coherence-cach*
  *e-config.xml"*
  2009-11-30 22:46:08.515/3.594 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Service
   Cluster joined the cluster with senior service member n/a
  2009-11-30 22:46:11.765/6.844 Oracle Coherence GE 3.5/459  (thread=Cluster, member=n/a): Creat
  ed a new cluster "cluster:0xD7DB" with Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.1
  68.0.8:8088, MachineId=26632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceSe
  rver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A800080000012548585
  C6D68081F98
  2009-11-30 22:46:11.796/6.875 Oracle Coherence GE 3.5/459  (thread=Invocation:Management, member
  =1): Service Management joined the cluster with senior service member 1
  2009-11-30 22:46:12.515/7.594 Oracle Coherence GE 3.5/459  (thread=DistributedCache, member=1):
  Service DistributedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.593/7.672 Oracle Coherence GE 3.5/459  (thread=ReplicatedCache, member=1): S
  ervice ReplicatedCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.609/7.688 Oracle Coherence GE 3.5/459  (thread=OptimisticCache, member=1): S
  ervice OptimisticCache joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=Invocation:InvocationService,
   member=1): Service InvocationService joined the cluster with senior service member 1
  2009-11-30 22:46:12.625/7.704 Oracle Coherence GE 3.5/459  (thread=main, member=1): Started De
  faultCacheServer...
  
  SafeCluster: Name=cluster:0xD7DB
  
  Group{Address=224.3.5.0, Port=35459, TTL=4}
  
  MasterMemberSet
    (
    ThisMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=266
  32, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    OldestMember=Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=2
  6632, Location=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
    ActualMemberSet=MemberSet(Size=1, BitSetCount=2
      Member(Id=1, Timestamp=2009-11-30 22:46:08.109, Address=192.168.0.8:8088, MachineId=26632, Locat
  ion=site:localdomain,machine:host1,process:1060, Role=CoherenceServer)
      )
    RecycleMillis=120000
    RecycleSet=MemberSet(Size=0, BitSetCount=0
      )
    )
  
  Services
    (
    TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.0.8:8088}, Connections=[]}
    ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMembe
  rId=1}
    InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
    DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCo
  unt=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
    ReplicatedCache{Name=ReplicatedCache, State=(SERVICE_STARTED), Id=3, Version=3.0, OldestMemberId=1
  }
    Optimistic{Name=OptimisticCache, State=(SERVICE_STARTED), Id=4, Version=3.0, OldestMemberId=1}
    InvocationService{Name=InvocationService, State=(SERVICE_STARTED), Id=5, Version=3.1, OldestMember
  Id=1}
    )
  

• Mozilla's FTP server is not running

  Mozilla's FTP server versions is not accessible using Firefox 6.

  No problems with it on my XP system. What happens when you go to this address?

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How to load the ftp server?

  Dear Sir.
  I use tecra M2 w - xp pro: to use ftp serversoftware which is usually standard in professional
  but when I want to load it from "add/remove components of the window: IIS" since the wizzard, I get the message a certain file is missing and must be taken from CD xp-prof: when I use recovery cd rom (only has windows xp on it) to obtain this file, which does not work: so, how to get IIS ftp server software?
  Thank you

  Hello

  You cannot use Recovery CD because there are Ghost file image. Instead of CD WXP search please C:\I386 folder.

• What version of PHP is used by OS x Server?

  I'm on OSX Server 3.x in Mavericks, mainly for use as a service of Time Machine to other Macs on my network. First question, I want to have PHP 5.6 with different extensions, which do not appear to be included with 10.9 or OSX Server. The web service in OSX Server has a checkbox to turn on PHP. OK, but where is this use from the? OSX Server provides a PHP version, somewhere, and if so, where it is kept in the file system?

  A particular PHP based portal that I want to use needs some PHP extensions. Install the full php5.6 and the newest put PHP in a new place, / usr/local/php5 of the user. But whatever OSX Server is apparently a few other activities distribution of PHP from somewhere and I guess that has its own configuration for apache to use from this place, everywhere where it is...

  Someone at - it no information to this topic... or suggestions about whether I should just disable this service in OSX Server and install or configure apache directly as if OSX Server is not there, or how I can update PHP to use in the web OSX Server service?

  I'll also ignore the OSX Server FTP and use pure-ftpd. There is nothing else in OSX Server I would, I really need to Time Machine... so I intend to use a more lightweight way to do there, but it is not.

  Visit http://opensource.apple.com/ and take a look at the apache_mod_php-xxx for your OS X version. Also visit https://www.macports.org/ to install php extensions and 5.6 (MacPorts stores installed software in "/ opt/local").

• FTP problems with the linux ftp server

  Hello

  I have a problem when trying to get a file via FTP. The FTP server is an embedded linux system, get the file manually via FTP is no problem, but to TestStand, I get the following error:

  Cannot download the file ' / opt/log/sislog.log'.
  Check if the local and remote path exists and is read and write respectively.

  The system does not have the specified path.

  error. I know that the file is there, the permissions are given. So I tried the other way around and tried to download a file called "mysislog.log" in that directory and download it again. I get the same error, but when I telnet to the LUX machine, I see that there is a file in this directory, but the file is called "\mysislog.log" - so I think backslash TestStand put the last bar in the name of the file and therefore impossible to load the file.

  Here is the list of the repertoire of the LUX machine:

  root@FCM2001-A2-03-37-4A: / mnt/exponent0/opt/log > he's
  -rw - r - 1 root root 0 16 Apr 08:51 \mysislog.log
  -rw - r - r - 1 root root 111219 16 Apr 08:41 syslog_0.log
  -rw - r - r - 1 root root 262096 Apr 13 11:52 syslog_1.log
  -rw - r - r - 1 root root 35503 Apr 13 11:53 syslog_error_0.log

  Any ideas?

  Hello

  Unfortunately, this is a known issue that will be fixed in a future version of TestStand (although I don't know what future version). The FTP step was designed for LabVIEW RT.

  The workaround is to call a code module that runs this ftp upload, possibly using a ftp software.

  See you soon,.

  Cheggers

• EA4500 Router FTP Server Security

  I have a general question around the FTP server on the EA4500, is it safe? I don't see any option to use TLS or SSL, or specify only implicit/explicit connections. Is it safe to use the FTP server to the external? Any help appreciated.

  Xuggs,

  When you access your USB remotely through FTP, you send your username and password without encryption. In addition, the files you download and download are transported over the internet without encryption.

  So no, he's not sure. There is risk. How much a risk? I do not know. Obviously, you don't want to keep sensitive information on your USB key and expose it to potential FTP snooping.

  Some people might consider the photos of family on vacation to Hawaii sensitive, while others care.

  The chances of Linksys update firmware to secure FTP support? You have a better chance of winning this Saturday Powerball lottery drawing.