Using DataGuard PeopleSoft Application.

Similar Questions

• Is cell required when you use the map applications of conduct?

  Is cell required when you use the map applications of conduct?

  Yes. GPS does not work with a Wi - Fi connection.

• Satellite A200 webcam is used by another application

  After a few seconds when I have turned on-camera web on my Satellite A200, it stop working and displaying the message "used by another application. Is there any officially recommended by TOSHIBA method to decide this problem?

  This was very often discussed here in this forum. If please use advanced search option and put in use by another application as search terms.

  Number of threads is listed as the search result. Will you please check and I hope that you will find answer how to properly use the webcam.

  Bye and good lock!

• recently to message this application memory is exhausted when I use the same applications as always before

  iMac running OS 10.9.5, suddenly getting alerts that my application memory is running out / has run out; I use the same applications that I used throughout and never had these alerts. I close all except an application but still get the message. This just started happening.

  HI there are Selia,

  Looks like you get this error message concerning the exhaustion of the memory of the application no matter how little you actually run. I would like to start by resetting your PRAM first:

  OS X El Capitan: reset PRAM your computer

  https://support.Apple.com/kb/PH21876?locale=en_US

  1. Choose the Apple menu > shut down.

  2. Look for the following keys on the keyboard: Option, command, P and r. you need to hold these keys down simultaneously in step 4.

  3. Turn on your Mac.

  4. Immediately press on and hold down the command-Option-r-P. You must press these keys until the black screen with the Apple logo to appear.

     Continue to hold the keys down until you restart your Mac, and you hear the tone of starting for the second time.

  5. Release the keys.

  After resetting the PRAM on your computer, you may need to update your speaker volume, screen resolution and startup disk preferences.

  Then test the question a bit. If it persists, I would then start mode safe so that the system can check for disk errors and clear a few caches of system level.

  OS X El Capitan: start in safe mode

  https://support.Apple.com/kb/PH21875?locale=en_US

  You can also use the activity monitor to see if there is a runaway process eating all your memory or put too much pressure on her:

  Use the monitor activity on your Mac.

  https://support.Apple.com/en-us/HT201464

  Thank you for using communities of Apple Support.

• How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit

  Hello

  How can I create a Windows using NOR-DAQmx application in Visual Studio 2010 64-bit?

  I'm transferring a 32-bit application on 64-bit.  In visual Studio, I added the 64-bit project configuration.  He compiled the source very well but the reports link errors:

  error LNK2019: unresolved external symbol DAQmxReadAnalogF64 referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateAIVoltageChan referenced in function NI6008_AnalogInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxReadDigitalLines referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDIChan referenced in function NI6008_DigitalInput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxWriteDigitalLines referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj
  error LNK2019: unresolved external symbol DAQmxCreateDOChan referenced in function NI6008_DigitalOutput NI_6281\NI6281.obj

  These, of course, are the functions OR that I use.  The NIDAQmx.lib has been added to the Input of the link property.

  Any help would be appreciated.

  Thank you

  -Neil shore

  Hi LaserShore,

  Think you that you added the 64-bit platform settings target according to this page? : http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/64bitcore/

  Already running 32-bit application? Have you changed references to the 64-bit version?

  You use Measurement Studio? If so some features are not supported with 64 bit.

  Also when you say that you have added the NIDAQmx.lib, did you follow this KB:http://digital.ni.com/public.nsf/allkb/38F67B28D995C6958625706E000C580C

• IR hotsync problem: "because the port is in use by another application."

  I finally got my system operation.  Sony Clie TJ - 25 pda, Palm Desktop 4.1, Windows 7 64 bit.  Very delicate balance.  I failed to install the new software released by aceeca.  I finally got it by infrared hotsync.  Several times.

  Now, today, I get the message on the Clie: "could not start the hotsync operation because the port is in use by another application."

  I saw this thread and in fact ensure that the transfer of images using a digital camera box is unchecked.  It still does not.  The icon hotsync in the lower right part of the screen, when I check that IR is checked, nothing else is.  It still does not.

  Thoughts?  Ideas?  Suggestions?

  Cidercat I had this happen to me with bluetooth hotsync before. I listen to radio, transfer files and surf the web with bluetooth. I could solve the problem by turning off the bluetooth, then turn it back on. Sometimes a warm reboot might also work. I came across a free application for the Palm tree named NetworkDown. It closes completely all active sessions down. You type right on the icon to run it. It works on my TX.

  http://www.metaviewsoft.de/en/software/PalmOS/freeware/other/NetworkDown.PRC

• Windows detected your registry file is still in use for other applications or services.

  I get this warning in the case where the application of visualization of the newspaper.  How can I solve the problem?

  I get this warning in the case where the application of visualization of the newspaper.  How can I solve the problem?

  Check this box

  http://social.technet.Microsoft.com/forums/Windows/en-us/7e5654ef-5c02-4f25-b9da-2024c8e41f00/Windows-detected-your-registry-file-is-still-in-use-by-other-applications-or-services-the-file-will

• I can't start video on Skype as they say, that it is used by another application?

  When I connect to Skype with a video call, I get a message saying that your camera is used by another application, what can I do?

  [Moved from comments]

  Hello

  Work through these positions;

  http://community.Skype.com/T5/forums/SearchPage/tab/message?q=video+is+in+use+by+another+program

  Support Skype homepage

  https://support.Skype.com/en/

  Hope this helps,

  Don

• I can't install service pack 3, I get an error that ntkrnlpa.exe is in use by another application

  I search on the forum and found that another user had the same problem but nobody answered.

  What happened is that I had a few viruses that my computer shuts down completely.  I have simply no money to buy or update of protection against the virus at the moment.  So, my computer crashed.  Then I had to use my system restore disks to restore my computer.  Then, after that I restored my computer now goes to the blue screen and scans files each time.  At the end of the list is a message: unable to write to the boot sector (according to me, it is said).

  Then I accidentally downloaded a virus.  He was disguised as a MS program and was called FixIt.  I couldn't get down there and he asked for credit card information.  I don't give any information and was able to use a browser to display the McAfee, then remove.  Then I used Malwarebytes to remove some other virus.  Not knowing what else to do, I tried to defrag and received an error message that my C: drive has been corrupted.

  My CD Player no longer works and my computer has problems.  I thought that if I downloaded the FixIt problem, it could solve some of the problems it is to have my computer.  It won't work because I have not installed Service Pack 3.

  When I try to intall Service Pack 3, it extracts files and brings me to setupwizard and then gets up to a certain point, and I get an error message as follows:

  c:\windows\system32\ntkrnlpa.exe file is open or in use by another application.

  I don't know what else to do.  I have everything turned off.  I tried to download and save to my desktop and it still won't work.

  Any help would be greatly appreciated!

  When I ran Process Explorer, I have disabled this file ntkrnlpa.exe.  I couldn't tell what was using this file - but I got the Google Redirect virus, so I thought that a virus has access to this file and prevents me from doing anything.  I don't know if that was the case, it was just my guess that it was what was going on.

  It worked for me.  It temporarily disables this file and then you can install Service Pack 3.

  I received instructions on my site quietfish.ca if you want to check.

• my xp media center 2005 gives an error "the video decoder is currentley in progress for use by another application"

  my xp media center 2005.

  whenever I try to use my media center ' video decoder is currentley in use by another application close all applications and restart the Media Center»

  I have no other programs running and have no idea what as happened to create this problem

  Suggestions: -.

  1] uninstall and reinstall the video decoder.

  If the above does not help, then

  2] uninstall and reinstall the tv tuner card driver. Visit the manufacturer's Web site to download and install the latest compatible driver.

• Media Center message ' decoder is used by another application "after Windows XP update

  After updating windows xp on my Dell xps 400, I can't watch live TV or record TV.

  I get a message that the decoder is in use by another application.  I have run the decoder checkup utility video and that shows incompatibility.  Nothing on this computer has changed except the XP updated.

  .NET framework 1.1:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  For .NET Framework 1.1 SP1:

  http://support.Microsoft.com/kb/885055

• Error SP3 cannot be updated to SP3. The c:\windows\system32\comctl.dll file is open or in use by another application

  I am running windows xp sp2, and my system no longer recognizes my cd/dvd ROM. I tried using microsoft 'Fix It', but it says I need to run service pack 3. During the download of update I get error SP3, the file c:\windows\system32\comctl.dll is open or in use by another application. All the closed only apps.are execution update for sp3.   The cd/dvd ROM error says file in the registry is missing or corrupted. I'm stuck. Anyone know what I can do?
  Thanks, Rokcney

  Hi Rokcney,
   
  Follow the steps listed in the section "Let me fix it myself" in the following article to resolve the problem:
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• having a problem with the webcam always says in use by another application

  Webcam always says in use by another application, when I click on switch or try again nothing happens

  Hello

  1 - is a built-in webcam?
  2. don't you make changes before the show?
  3. When you receive the message?
  4. What is the brand and model of the webcam?

  Method 1:
  You can also check in the Task Manager running other applications that use the webcam. If there is a demand then complete the application process and check.

   

  Method 2:
  I suggest you perform the clean boot and check if it helps
  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• I can't delete a file. I get "this file is used by another application or user.

  I'm trying to delete a file that my "Identity patrol" software is marked as malware. However, when I use the software to remove this file it will fail to do so.

  When I try to delete the file myself, I get the error message:

  "This file is used by another application or user.

  How to find our other application or the user uses this file? How can I remove it?

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

• try to hotsync my Z72 palm pilot with palmOne desktop on my laptop Vist64-Message... .port is used by another application. lights. -What should I do?

  HotSync "Z72 palm pilot" with "PalmOne Office" using bluetooth.

  palmOne Office v 4.14 installed on my Vista64 laptop

  worked at the same time, re-installed pgm after system restore and get a message:

  "Cannot start the Hotsync operation because the port is currently in use by another application"

  Computer seems to see the palm pilot and Palmpilote sees the laptop.

  Tried to use the USB hotsync cable but cannot find the windows driver.

  Help! RR

  Hi RomanRosiek,

  I suggest to try the steps from the link to the following article and check to see if it helps:

  "Cannot start the HotSync operation because the port is in use by another application."

  I hope this helps.