Using elements of the application of interactive report filters

Similar Questions

• To reference the lines of interactive report filtered in PL/SQL

  Hi all
  I use an interactive report on a page. I want a process page to reference the filtered rows dynamically by an end user. The report to be referenced is not recorded but simply filtered in the main report.
  
  How to reference lines filtered in pl/sql. I searched through the forum and that you can't find a concise answer.
  
  BR,
  
  Ben.

  Hi Jari

  I think that's what I saw last time this came to the top: http://www.apexninjas.com/Checkboxes_in_Interactive_Reports.pdf

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Workaround solution for using PLSQL as a source of interactive report?

  Hi all!
  
  I have a PL/SQL anonymous block here, I wanted to use as the source for an interactive report. Only, I didn't know that interactive reports supported PL/SQL...
  For example, the code:

  DECLARE
  a_userid NUMBER;
  
  BEGIN
  SELECT userid
  INTO a_userid
  FROM users
  WHERE UPPER(username) = :APP_USER;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  a_userid := 0;
  
  IF a_userid = 0 THEN
  SELECT distinct a.name AS Foodname, a.foodid AS Foodid
  FROM food a 
  INNER JOIN foodunit c
  ON a.foodid = c.foodid
  WHERE a.foodlanguageid = :P18_LANGUAGE
  OR a.foodlanguageid = :P18_SET_LANGUAGE
  AND a.userid = 0
  ORDER BY a.name;
   
  ELSIF a_userid = :APP_USER THEN
  SELECT DISTINCT a.name AS Foodname, a.foodid AS Foodid
  FROM food a 
  INNER JOIN foodunit c
  ON a.foodid = c.foodid
  WHERE a.foodlanguageid = :P18_LANGUAGE
  OR a.foodlanguageid = :P18_SET_LANGUAGE
  AND a.userid = 0 
  AND a.userid = a_userid
  ORDER BY a.name;
  END IF;
  END;

  Of course this code will not work because I do not understand everything IN the statements, but just trying to understand what it is that I'm aiming.
  This code point is that when a user is not logged (and visits as a public user page), it must fetch the 'NAME' and 'FOODID"FOOD table lines. I added a column of this table (named USERID) and all rows having the value '0' for this column.
  Now, when a user logs on, he or she has a fixed username (registered in another table, named 'USERS'). A user is able to add foods that they own to the list.
  
  Of course, a visitor is not supposed to see all food products that have been added to the table by registered users. So, I wanted to show the separate data. Visitors (unregistered) only see the default values (all the lines in which the userid = 0) and registered users should see both added their own food (my username is 1, then I want to see all the lines where the userid = 1) and the rows with default values (where userid = 0).
  
  I found a way here:
  http://www.oracleapplicationexpress.com/tutorials/71-Oracle-Apex-interactive-report-based-on-PLSQL-function
  
  But it is not only makes sense to me. Y at - it is an easy way to explain how the tutorial in the link, or you know an easier way? Like making a procedure or something, or a function or a process page and somehow, refer to that in the SQL source interactive report?
  
  Any help is greatly appreciated.
  
  APEX version: 4.1.1.00.23

  Hi again,

  How does this request?

  SELECT DISTINCT a.name AS Foodname, a.foodid AS Foodid
    FROM food a INNER JOIN foodunit c ON a.foodid = c.foodid
   WHERE a.foodlanguageid IN (:P18_LANGUAGE, :P18_SET_LANGUAGE)
    AND (a.userid = :P18_USERID OR a.userid = 0)
  ORDER BY a.name
  

• How to move the form of interactive report on the left side to the right?

  the Apex 4:
  I write application in Hebrew, so I need to put in the page template dir = "RTL".
  all report and button and point moving to the right, but
  the stay of interactive report on the left side of the page (instead of right).
  
  Does anyone have an idea how to change the location?
  
  Thank you
  Return on investment

  Hello

  For the research on the copy of the side section right hand following the report in your HTML page header is on.

  Graham

• Define an element of the application to another application?

  Salvation of the forums,
  
  Is it possible to define a part of the application to another application?
  
  The context:
  We have defined three elements of application in our main application. These items are available in our custom permission: used to determine the context from which the user accesses the page. If the user has access (in light of this context and security defined for the page), the elements are calculated with the values of the current context.
  
  Now we add another application that uses the same permission. We could create items of the application with the same name of this application and pass the context values to the other application every time that the user to navigate from one application to another. The problem is that permission is launched until the values are assigned to the elements (correct me if I'm wrong).
  
  I would like to reuse the same elements of the application (defined in a single application) where the user is. I can access an element of the application to another application (see [this thread | http://forums.oracle.com/forums/thread.jspa?messageID=2453615]), but I have not found a way to define its value. Is this possible?
  
  Thank you
  
  Jeff

  Jeff,

  I'm sure you can't do what you ask (page set the values for item directly in applications).

  You're right about the scripts of authentication and authorization running until the values are assigned to the elements on the page.

  But you might be able to accomplish what you want via a cookie? Write it in the calling application and read in the called application? Maybe it's not the most secure method, but it seems like it would do the job, huh? I think that you would create a process to send the calling application page that creates the cookie and a front of header in the receiving application page that reads and analyzes. Or you could have three different cookies if you don't want to parse the string in a. I think you might want to remove the cookie (s) after reading, so it is unlikely anyone can understand how to hack them.

  Good luck

  Stew

• Extract the elements of the application via command line

  Hi all

  I can extract the application of the elements of the option extract-> elements of the application.

  Is it possible that I can automate this command line or any other method

  Thank you

  Kind regards

  TVMK

  Yes, LCM is a command line utility that can be fully automated for these elements of snapshot off. Take a look at the document of LCM

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/epm_lifecycle_management.PDF

  As mentioned, the API is another way too but who can take over installation but doable.

  Thanos also gave some options you could look.

  If the information provided to the clarity/confirmation that you are looking for be sure to close the thread for the other members of the community may be able to find the solution at the appropriate time in the future.

• Add columns in the area of interactive reports

  Hello Experts,

  I will add a column more in the interactive area, but is not thinking about the main screen of the report...

  I only add a column in my query and set the position in the report area but still its not shown on main screen...

  Please help me...

  
  

  
  

  Thank you

  Xandot wrote:

  I will add a column more in the interactive area, but is not thinking about the main screen of the report...

  I only add a column in my query and set the position in the report area but still its not shown on main screen...

  After adding new columns to existing NPA, you must select them for display as developer and Save the new report as the default main.

  Please see the documentation for interactive report.

• Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  Hello out there! I am trying to understand the relationship between the products. I am a current user of 13 items and sought to CC Photoshop with Lightroom. Always use elements like the storage tool to catalog my photos or it get replaced?

  It's kind of ridiculous. All I want to do is ask a question and there is no place to connect with anyone. Sucks!

  Hi charlesf,

  If you choose to go to CC Photoshop with Lightroom, Photoshop Elements would not be replaced.

  CC of Photoshop and Photoshop Elements are different programs, so the two will remain separate on your machine and catalogue items would not hit at all.

  Let us know if you have any other questions.

  Kind regards

  Claes

• Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month so I don't understand why that'

  Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month, so I don't understand why this is happening. I really need to work now and I can't. Great work Adobe Cloud. Any suggestions on what can I do? Thank you

  Check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Bought Adobe CC today. More apps for how I can use outside of photoshop, illustrator and indesign. Can I use all of the applications listed in the membership fees charged per month? Or will be charged extra?

  Bought Adobe CC today. More apps for how I can use outside of photoshop, illustrator and indesign. Can I use all of the applications listed in the membership fees charged per month? Or will be charged extra?

  Cloud Plans https://creative.adobe.com/plans

  - and conditions for subscription http://www.adobe.com/misc/subscription_terms.html

  -what is in the whole cloud http://www.adobe.com/creativecloud/catalog/desktop.html

• Define and access the elements of the application

  Hello
  
  How can I set and access the values of the elements of the application of the package? is ' t recommended to access the elements of the procedure?
  
  Thank you

  Hello

  PL/SQL functions or procedures without worrying whether or not they are packed:

  procedure: APEX_UTIL. SET_SESSION_STATE ('MY_ITEM', 'myvalue');

  get the function: V ('MY_ITEM')

  Regards Garry

• Application of interactive report of apEx using the last value of the point

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  
  

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  
  

  Thanks for any help you can offer
  

  S.Bovin wrote:

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  Add the REGISTRATION_YEAR_ITEM to the IR Page elements to submit property. He will submit the current value in session state.

  Why bother with the page element at all? Why users can't create just an IR filter?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  For performance reasons, use bind variable notation when you reference values from session state in SQL queries.

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  Why not? That it will provide you with a safe and supported environment and your users with a much better life.

• Sort the results of interactive report in no data found message

  Hello
  
  I have an interactive report that returns results based on the: bind variable QUERY - I have a list of navigation on the side where all the elements to link to the current page with different values of request. The IR works fine until I try to sort the columns by clicking on the heading and selecting increasing / decreasing, how it returns no data available.
  
  It starts to work again if I change the last line of GOLD: REQUEST IS NOT NULL but this breaks the functionality of the report, I would like to return only selected articles or all if no query variable is present. I'm guessing that sort sets: ASK something temporarily and divides. My query is below, any ideas?
  

  SELECT   id,
           job_number,
           appt_start,
           domain,
           pwa,
           status,
           tstamp_created 
    FROM   fail_jobs 
    WHERE  (status = 'NEW' AND userid_created != 'SYSTEM' AND :REQUEST = 'ARD') 
       OR  (status = 'ATR' AND :REQUEST = 'ATR')
       OR  (status IN ('ERR','REV') AND :REQUEST = 'REV')
       OR  (status = 'COM' AND :REQUEST = 'COM')
       OR  (status IN ('PCD','PCA') AND :REQUEST = 'PCD')
       OR  :REQUEST IS NULL

  Thank you

  There are problems with interactive reports referencing known: DEMAND value, probably due to an internal logic that manages also simultaneously - potentially cause a malfunction or blockages.

  A workaround that I learned is to create a calculation to assign: APPLICATION to a temporary element (a PXX_REQUEST, for example) and reference it in the query, instead of: ASK. This has worked well for me in my experience.

  I would like to know if this helps - pls sign the thread as 'Useful' or 'Correct' if so, so more people can benefit.

  TKS,
  Kléber

• Do we not have option to deselect ascendant and descendant of the options in interactive reports 4.2

  Hi all

  I've created an interactive report in my application and the required headers, I had used options for sorting as shown below

  

  Option selected now ranking ascending or descending sort, then report will appear as

  

  But the small icon will be kept in the report, or we can choose alphabetical, have we not option Select United Nations this option so that the option will not appear in the header part.

  Version 4.2 of the apex

  Theme-Light blue-100

  Kind regards

  Sruthitamiri.

  Sruthi Tamiri wrote:

  I've created an interactive report in my application and the required headers, I had used options for sorting as shown below

  

  Option selected now ranking ascending or descending sort, then report will appear as

  

  But the small icon will be kept in the report, or we can choose alphabetical, have we not option Select United Nations this option so that the option will not appear in the header part.

  The option is in the Actions of IR menu. Go to Actions > Format > sorting and deselect the current sort columns by setting - Select the column - column .