Using HP drivers seems not to recognize my photosmart 5524 and my mac turns 10.8.2 which is

Similar Questions

• HP printer D110a not on display upward on printers and Fax (Mac)

  Hello!
  
  It is the question of my friend.  Using iMac
  
  We have both the HP D110a wireless printer. I was able to implement the mine without any problems, but my friend is not able to get the printer appears under print & fax.
  
  When I set up my printer she stood and used Hello. My friend can't get Hello appears. I have older iMac (2006) and it has new iMac (2010)

  It is using snow Lep. 10.6.5

  Someone, please help?
  
  Thank you
  Jamie

  First of all, let's reset the printing system:
  
  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• Why can't I not hear anything on my computer and the group says everything is working which has disabled

  I can't hear anything on my computer.

  States of control panel everything works fine. what hurts

  If you click on the small speaker on the system tray, it is not accidentally muted or the volume level set to zero?

• Models of DW: 'this document uses the following files not in this site.

  I recently started using DW templates in CS6. It was a bit frustrating at first, but seems well wouth it. I've created quite a few pages in the folder root of hares and have no problems there. However, I created a new folder to a different section of my site (mysite.com/new_folder/new_page.htm), and then went to save a new page of the model and got the message "this document uses the following files not in this site. Its the same site, just a new folder which is placed at the root.  When I save the page in the new folder there to make a copy of duplicant images, css scripts and place them in the new folder to work? Must be a way to do it and have DW know where to find the original files surely?

  Thank you

  I downloaded a test page... It turns out that the 'message' was just misleading and all the Info page has correct links. Everything is good

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Can I still change a LabVIEW program even if device drivers are not installed on the computer used for editing?

  Hello

  If I do not install device with LabVIEW drivers can I still change any given LabVIEW program created with this version?  Or do I need to install device drivers if I'm editing a program that uses these drivers?

  Thank you

  Dave

  What you reinstall? The dll is part of the traditional DAQ driver.

• Printer does not work. Update Windows drivers seem to be the cause of this.

  It is a recurring problem.  The printer stops working.  In the past, I tried to update the Windows driver, but it did not help.  I have uninstall the printer.  I reinstall the printer with my original disk, and everything works great... until this last time, I get the error BLUE SCREEN indicating the USB port that my printer is plugged (: f /) is a malfunction and stop for my protection.  The BLUE SCREEN telling me to check the updates, which there are 2 drivers for my printer, and I download them. Virus scanner, which entered its own; Defrag, which I did, and then run CHKDSK F, who said there is a problem running that.  Honestly, when the computer was working, I don't check what port he used.  Now it doesn't work, I checked the port and it is said USB001.  My computer was back in 2006 and the printer may around the same time.  I went through all the troubleshooting steps, until the uninstallation of a port.  I me am stopped there because 'port' was not clearly defined and I already have enough trouble with this computer, I didn't mess up (again) at all times.   Dell wants much more money to help and I can't understand without asking them to repeat the question several times and using a ton of minutes on my cell phone, and the updates come from Windows anyway.   Does anyone have advice?  I can't afford a new computer right now.  The BLUE SCREEN me freaks really out.  I would try to avoid those.

  In short (too late) when I download the printer driver updated from Windows, my printer stops working.  This last time, I got the BLUE SCREEN error that really me freaked out.  Any suggestions?

  Get in touch with the manufacturer of the printer...

• How can I find and close a program using mirror drivers? My Aero effects do not work because of this

  Aero troubleshooting said to me that ' a running program using a mirror (a type of display driver) driver is not compatible with the Aero visual experience. " In order to display Aero effects, close all programs that use mirror drivers, such as Windows and Windows Live Mesh Remote Assistance. »

  The Aero effects worked well earlier in the day. I had to get help for problems with HP printer and I allowed them access to my computer and they deleted and reinstalled the printer files and that works fine now but the Aero effects are not.

  I'd appreciate any help.

  Hi kristopher_tn,
      
  If it helps, try the steps and check them off below.
  1. click the Start button, type devmgmt.msc and press ENTER.
  2. now in Device Manager, expand graphic cards, under the present, you should be able to see driver mirror.
  3. right-click on it and select Properties.
  4. in the Properties window, on the driver tab, click Uninstall.
  5. After uninstalling the drivers, restart the computer. This should install it automatically the appropriate drivers for it.
  
  For more information visit http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Driver mirror are used primarily by vpn (virtual private network) / Remote Office Tools / Windows Live Mesh. Remove this driver may resolve these issues.

  
  Hope this information is useful.
  
  Umesh P - Microsoft Support

• Not to recognize fingerprints after the transfer of drive fingerprint reader

  Having transferred all my hard drive from one computer to an identical due to a broken screen, my password of fingerprints is no longer recognized.

  The hard drive and motherboard were transferred to the new computer, resulting in a new either not recognize the administrator password. Using a downloaded software, all typed passwords have been cleaned, allowing the opening of session. Fingerprint reader recognizes again there is a password for fingerprints of all the files, I had digital-Word prints of past - protected, but he can't seem to match my fingerprint to the password.

  Is it possible to reset the password of fingerprints without a backup password (as there's none now) or have the computer match fingerprints?

  Hello

  1. Is - this Microsoft Fingerprint Reader installed on your computer?
  2. Who is the manufacturer of the computer and was the fingerprint reader provided by the manufacturer?

  Method 1:
  Reinstall the drivers for the chipset on the computer. Use the disc that came with the motherboard to install drivers or visit the manufacturer's Web site and download the drivers.

   
  Method 2:
  See the link below and follow the steps.
   
  How to add, change, or remove a fingerprint logon by using the Fingerprint Logon Manager for use with the fingerprint reader digital http://support.microsoft.com/kb/899626
   
  You can read the article on the Web page that the link is given below
  How to clean and maintain your Microsoft Fingerprint Reader http://support.microsoft.com/kb/894036 device

• Satellite A30: Drivers does not work

  Please can someone help me. I have a Toshiba Satellite A30 laptop which I can't seem to find the drivers to 'work'. I used the drivers on this website, but surprisingly, the vast majority of them do not install (most of the error messages say that this software is not compatible with your hardware or operating system, some say that the destination name is too long or something like that), and the few that appear to install correctly do nothing once installed. I don't know what to do - I've tried everything... Without a DOUBT, I used the right drivers according to this site (A30, WINDOWS XP drivers)...

  Basically, I'm in this position because I had to format my hard drive, however, I don't have the original recovery CD or utility CD anymore. I have a Windows XP CD I have installed...

  The model number is: PSA33E - 7C3F3 - 6-X

  I bought this used computer, so I don't know where there for country of origin (if that makes a difference) - However, I'm in the United Kingdom, and I bought it in the United Kingdom, so I guess it's a Machine of Spec UK.

  This computer has 512 MB, 30 GB HD, 2.8 Ghz Pentium 4, ATI Radeon Mobility 9000, 15,1 "TFT... I hope this helps...

  Please answer as soon as possible.

  Hello

  I can t he understand. I tried to download the drivers from this page and it works correctly. Believe me, these are the correct drivers for this device.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  The drivers are compressed with the Winzip. Have you used this software?
  This software is necessary for decompressing files.

  You have suggested that you have problems with the installation. It is very important to install drivers in the correct order.
  First of all, you need to install driver chipset and then all the other drivers as a pilot display etc.

  Please check for this possibility.

  Good bye

• Satellite Pro L100: USB2 drivers do not have compatibility with Win XP

  SAT Pro L100 - I loaded the USB 2 drivers received using a prolific USB to Serial Comm Port (Sunix - UTS1009B) a single port USB to serial port cable.

  In each instance of loading the drivers message appears "did not the Windows Logo test for compatibility with Win XP. If continue or stop, drivers do not work.

  Seems as if there is a problem loading the USB 2 drivers. need assistance?

  Expensive branded

  That s nothing unusual.
  Many 3rd party drivers have not been tested by Microsoft and the message appears so that the pilot didn't make the Windows logo test for compatibility with Win XP!

  But if you use a driver that was designed for Win XP, you just continue and finish the installation.

  So, don t worry not and follow these steps!

  Best regards

• Satellite P200 - 156 PSPBGE: can I use XP drivers of similar P series

  Hello

  Bought a new laptop P200 - 156 (PSPBGE) - which has Vista Home Premium installed.

  You can use as a development (developer) - need to install Oracle databases. So need to have enterprise (Vista). Expensive!

  Anyway,.

  -If I install XP Pro - (pilots - only for vista ONLY) - can question I use similar series xp P drivers?

  How much hassle involved?

  Any feedback is greatly appreciated.

  Hello

  In fact for the P200 XP drivers are not available at this time and it seems that we must wait for the compatible XP drivers!

  But maybe there is a light at the end of the tunnel
  I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24481

  It s on the use of P100 XP drivers on the laptop P200.
  Only XP drivers since the P100 must run on the P200 because this series are similar.

• Fluke Hydra 2625 with NI LabVIEW drivers: can not read the output data

  I work with a Fluke Hydra data logger 2625 have downloaded the drivers from NI LabVIEW, crossed the config., initialize and modes files and now trying to read data from a thermocouple.

  Initially, I was getting an error message ("17" I think) but now, after correcting the port numbers, the recorder data and LabVIEW seem to communicate without error. I would like to know where I should look (in the panels before different drivers) for temperature data output.

  Any advice would be appreciated at this point. Thank you.

  There is a driver not supported here. I have the instrument and you have not used one in quite a few years, but if using the example, the function can be set to temperature temperature with the 751 RTD or thermocouple. The results indicators min/max/last.

  The pilot could really benefit from a full rewrite, but it seems that most of the basic functions are there.

• Problem with windows vista, suddenly not to recognize a printer HP 5600 series that was printing correctly for 5 years

  Windows Vista Plug ' n Play does not recognize printer HP 5600 series. HP Solutions Center's says no HP devices detected. Using USP connect since the printer 5 years ago. Reinstalling drivers does not help. Installation with disc says printer is not connected (USB) to the computer, who she really is. Have tried all USB ports on the computer to see if plug ' n play would work. Any help in doing so. How can I solve this problem?

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.