using other cod in BlackBerry OS 6.0

Similar Questions

• Do not like and want to go back, or use other products

  Do not like the new Firefox and wants to go back, or use other products such as the chrome

  None of these methods works to open the Options page:

  • button '3-bar' menu > Options
    • Or if you have moved the Toolbar Options, this is the gear icon
  • Tools menu > Options
    • If you do not normally display the menu bar, press the Alt key to temporarily show

  If you get the same error in both directions, your installation of Firefox could be damaged. To do this, I suggest:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 40.0.3 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  No improvement with the toolbars?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• HP Compaq 6910 p: 6910p "this device cannot find enough free resources that it can use. (Code 12) »

  Under hardware and Sound/devices and printers, I have a yellow triangle with my 6910p icon.  Right click on the "hardware" tab States "this device cannot find enough free resources that it can use. (Code 12).

  I've recently upgraded the operating system to Windows 7 Professional.  Everything works ok but I show this yellow triangle where the devices are displayed.  When I look in Device Manager/Mobile Intel (r) 965, I get a window saying 'Problem detected with Mobile Intel (r) 965 Express Chipset Family'.   The next window States: "the device cannot find enough free resources that it can use. (Code 12).  If you want to use this device, you have to disable other devices on the system once".

  How can I go about doing so, the yellow triangle disappears?

  I tried to reinstall device Base system SP46972 and SP45738 of the video driver.

  Not sure if this is related, but I also have a black screen with a 1 in. border on the left and the right, which was not the case when Windows XP is the operating system.  I also need to solve this problem as well.  Searches on Google did not find the solution, so I hope someone can provide the answers to these two questions.

  

  Glad to hear that you would have recommended as the next step.  It has proved to be a challenge, but one that we have managed to find solutions for.    Thanks again for all your help and patients.     Carl

• USING ALT CODES ON A LAPTOP WITHOUT NUM LOCK

  LAPTOP HAS NO NUM LOCK INORDER TO USE ALT CODES. USING THE FUNCTION KEY WITH A NUMBER OF KEYS AND THE FUNCTION ALT DOES NOT WORK ON MY GATEWAY LAPTOP. IS THERE ANOTHER WAY TO ADD ACCENTS OF SPANISH WORDS?

  Hi Stephen finkin,

  Almost all the words of the Spanish accent require the combination of keys or the keys ALT.

  However since your laptop doesn't have this option, you can use the character map.
  You can use character map to insert special characters into your documents. Special characters are characters that can't be found on your keyboard. These characters include advanced mathematical operators, scientific notation, currency symbols, and characters from other languages.

  Special characters are characters that can't be found on your keyboard. These can include symbols, mathematics and special characters characters of other languages. You can insert special characters into your documents using the character map.

  1. open the card of characters by clicking on the Start button, all programs, Accessories, clicking System Tools, and then click character map.
  2. in the list font , type or select the font you want to use.
  3. click on the special character to insert into the document.
  4. click Selectand then click copy.
  5. open your document and position the cursor where you want the special character to appear.
  6. on the Edit menu, click Paste.

  Insert a special character into a document (ASCII codes)
  http://Windows.Microsoft.com/en-us/Windows-Vista/insert-a-special-character-into-a-document-ASCII-codes
  Using special characters (character map): frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-special-characters-character-map-frequently-asked-questions

  Also see the Microsoft KB article below.
  How to use the United International keyboard layout in Windows 7, Windows Vista and Windows XP
  http://support.Microsoft.com/kb/306560

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer windows vista laptop says that it is not enabled. When I try to 'reactivate' using the code stuck to the computer, it fails. What can I do?

  So, to my office, I have a laptop HP under Vista Home Premium x 86.  All of a sudden he says he is not enabled.  All my attempts to activate it using the code stuck on the PC itself did not work.  I need to get this computer to work properly, and I can't risk having a problem with him on the road.  My attempts to contact HP only ending with them telling me that they could remote virus scan and it would cost me over $ 100.

  I also bought a vista "anytime upgrade" and it won't let me even upgrade the system without the activation code.
  Help!

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• This device (graphics card), cannot find enough free resources that it can use. (Code 12) __NetBook ASPIRE ONE - display adapter resource conflict?

  This device (graphics card), cannot find enough free resources that it can use. (Code 12)
  NetBook ASPIRE ONE - display adapter resource conflict? Can't find the other conflicting H-washer? Graphics Intel Graphic Media Accelerator 3150.
  If you want to use this device (graphics card), you will need to disable one of the other devices on this system. I bought this camera 6 weeks, I can't get the maximum. Set-up for my graphics cards. 800 x 600-32 bit only. Please tell me what to do. And ASPIRE or Windows7 customer service phone #. Thank you.

  Hi athe43,

  Below I've listed the details of error Code 12 and the article with additional information:

  Code 12

  This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)

  Cause

  This error can occur if two devices that are installed on your computer received the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.

  Recommended resolution

  You can use the Troubleshooting Wizard in Device Manager to determine where the conflict is, and then disable the device in conflict.

  Turn off the device in conflict

  1. In the device properties dialog box, click the general tab.
  2. Click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.
  3. Follow the resolution steps provided by the wizard to resolve the problem.

  http://support.Microsoft.com/kb/310123

  This article was originally for XP however the description still applies.  Also, please see the following article on the opening of the troubleshooter of hardware for Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Hope that helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Removed USB controllers: can not return - "this device cannot find enough free resources that it can use. (Code 12)

  Original title: removed USB controllers: can not return

  Hello

  So today I tried to connect to a printer, and it wouldn't work (separate the issue, I don't want to worry about that now)

  I've seen several messages saying: you need to uninstall the USB controllers in Device Manager and then restart your PC. The pilots would then automatically reinstalled.

  It didn't happen, and now my Dell touch screen does not work. I can miss several other USB controllers too, I uninstalled about 3 of them, but I don't know whether or not it has been reinstalled.

  I currently have:

  -Hub USB generic

  -Enhanced host controller USB Intel (R) 8 series #1-9C 26

  -USB root hub

  -Host controller compatible xHCI USB

  Note that the last of them was a symbol of error on it and reads as follows:

  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  Can someone please tell me how much USB controllers I should have and how to save them?

  Thank you very much

  Hi Shalini.

  Thanks for the reply, but if you read through the posts on this thread, I think you will find that it has already been suggested that I do these two things - what I've done many times without result.

  Fortunately, I managed to fix it myself.

  To satisfy your curiosity and help someone else who could see this thread with a similar problem, here are the steps I took finally solve the problem:

  ______________________________________________

  I was always convinced that the problem is basically with the xHCI USB controller that I saw always reported as not working not properly in the device (Code 12) Manager. With this in mind, I set out to see if I could determine what the device was supposed to be in conflict with. I ran msinfo32 and began to examine the conflicts/sharing section. After a while, I decided I could not see anything obviously problematic or direct me to the controller xHCI, so I gave up on that front.

  Well, if I couldn't fix the problem with the current installation, maybe that I could find another way to install the xHCI USB controller that could circumvent the flaw that seems to be caused when windows reinstalls automatically it when restarting after the abduction. So I started trying to learn more about this "xHCI USB controller" - since Googling this term has given no end of problems not related.

  In Device Manager, I found a way to isolate the details of this driver in device (somewhere under the properties I believe) Manager. This has created a custom device showing in view only a select few connects the Manager. I have spent some time in the analysis of these and found the time during which the camera has stopped working properly. Suddenly a pattern emerges. Over and over again, see you the following series of when I was hoping that allowing windows to reinstall automatically the driver would to fix:
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been removed

  [Rebooted PC]

  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 has been configured
  • Device PCI VEN_8086 & DEV_9C31 & SUBSYS_05F91028 & REV_04\3 & 11583659 & 0 & A0 had a problem starting.

  Under each newspaper was referring to a driver name, I didn't already had access to: driver name: usbxhci.inf

  Now I got some new information about the xHCI USB controller, I took to Google. After much research (and not find something relevant), I found 2 obscure references to the driver who seemed at least somewhat relevant.
  The first reference has been a post on the forum where someone's USB ports stopped working. very similar problem to mine! There is little of any particular use in the nets, with the exception of the reference to a couple of windows updates: KB 2823516 or KB2822241

  It is not clear exactly what usbxhci.inf capacity was tied to these updates, but I made a note of them and moved.

  Another article contained no mention of specific ports USB not working does not and was centered around a different problem entirely. However, he has mentioned an another windows update: KB2919355-x 64.msu

  This one (as I remember) was clearer on the relationship between the update and changes to the usbxhci.inf file.

  Now, I had three updates which could make changes to usbxhci.inf at one point. With their name on a piece of paper, I started looking through my updates installed to see which ones I had installed. I soon discovered that Ko 2823516 or KB2822241 were not present on my PC, which saved the penalty to guess who would be the right to uninstall first.

  KB2919355 has been installed, and I made the decision to uninstall it, because as far as I knew, this update changed something in usbxhci.inf. After the initial uninstall was completed, but before the mandatory reboot for changes to take effect, I went into Device Manager and removed the xHCI USB... because I was afraid that if the new, "defective" was always present during the reinstallation of the update, it doesn't change anything.

  The device is removed once more, I rebooted the system. He drives for a considerable period, uninstall the update and then seems to have some sort of hitch; declare something in the sense of "we could not complete the operation. Changes to undo. " He stayed like that for a while before the system became operational again and began to "prepare windows. Once it was over, I discovered that my touchscreen and USB ports worked very well.

  Investigation later showed that the compatible USB xHCI host controller was is no longer marked with warnings. In addition, a series of USB controllers appeared that had not been there when the xHCI device was defective. I was also pleased to note that the update of windows for KB2919355 had already been reinstalled without messing up anything.

  _________________________________________________

• create a cartoon using AS2 code only. WOW, but...

  Hi guys.
  A nice code that I picked up to create cartoons. My character is sunny. We create several mcs responsible for CSM a) and b) attached or empty as support for sounds.
  BUT the subject pretty darn sound does not work.
  sound_1.start (); diesn work - but this works it moves it up right under the code attachsound.
  Then the next sound_2.start certainly work.
  I had to work in other code that I had even though it was still inside a function. I stick it under this code.
  
  numOfSounds = 5;
  numOfObjects = 5;
  objectPath = "images";
  
  _root.createEmptyMovieClip ("soundLib", 1);
  for (var i: Number = 1; i < = numOfSounds; i ++) {}
  soundLib.createEmptyMovieClip ("holder_" + i, i);
  _root ["sound_" + i] = new Sound (soundLib ["holder_" + i]);
  }
  sound_1.attachSound("1");
  sound_2.attachSound("2");
  sound_3.attachSound("3");
  sound_4.attachSound("4");
  sound_5.attachSound("5");
  sound_1.start (0, 999); / / only for bg music
  
  _root.createEmptyMovieClip ("objectLib", 1);
  for (var i: Number = 1; i < = numOfObjects; i ++) {}
  objectLib.createEmptyMovieClip ("holder_" + i, i);
  _root ["object_" + i] = (objectLib ["holder_" + i]);
  }
  Object_1.attachMovie ("sunny", "sunny", 1); / / Object1 is empty and sunny mc is the name of liaison and sunny is the name of the instance - usually called something different.
  loadMovie (objectPath + "/ cat_a.swf", object_2);
  loadMovie (objectPath + "/ cow_a.swf", object_3);
  loadMovie (objectPath + "/ bird_a.swf", object_4);
  loadMovie (objectPath + "/ pig_a.swf", object_5);
  Object_1._x=500// Sunny
  Object_1._width = 50
  Object_1._height = 50
  Object_2._x = 200
  object_3._x = 300
  object_4._x = 400
  object_5._x = 500
  loop Object_1._y=100// and spacing of the use
  Object_2._y = 200
  object_3._y = 300
  object_4._y = 400
  object_5._y = 500
  sound_1.start ();
  Object_1.sunny.gotoAndPlay ("Speak
  sound_1.onSoundComplete = function() {}
  _root. Object_1.sunny.gotoAndPlay ("static");
  sound_2.start ();
  }
  sound_2.onSoundComplete = function() {}
  sound_3.start ();
  _root. Sunny.gotoAndPlay ("Speak");
  }
  
  The beep code on his own DID work - I paste it here
  numOfSounds = 5;
  _root.createEmptyMovieClip ("soundLib", 1);
  for (var i: Number = 1; i < = numOfSounds; i ++) {}
  soundLib.createEmptyMovieClip ("holder_" + i, i);
  _root ["sound_" + i] = new Sound (soundLib ["holder_" + i]);
  }
  Use sound_1.loadSound to load outdoors.
  For my dialogues only need a movie clip and the load that you want - don't forget to unload its as welll
  sound_1.attachSound("1");
  sound_2.attachSound("2");
  sound_3.attachSound("3");
  sound_4.attachSound("4");
  sound_5.attachSound("5");
  sound_1.start (0, 999);
  sound_1.start ();
  _root. Sunny.gotoAndPlay ("Speak");
  sound_1.onSoundComplete = function() {}
  _root. Sunny.gotoAndPlay ("static");
  sound_2.start ();
  _root.r.nextFrame ();
  }
  sound_2.onSoundComplete = function() {}
  _root.r.gotoAndStop (2);
  sound_3.start ();
  _root. Sunny.gotoAndPlay ("Speak");
  };

  you remove _root.soundLib (all all its children using your sounds) when you create a _root.objectLib.

  to remedy this, create objectLib to depth 2.

• If I go buy Apple Watch nike, that I can use other groups like leather band?

  If I go buy Apple Watch nike, that I can use other groups like leather band?

  At this point, all we know is here:

  https://www.Apple.com/Apple-watch-Nike/

• Launch pad is automatically opened when you use other applications like Safari

  Hello! I use Macbook air 13 "mid 2013 with OS X EL Capitan and recently the launch pad is automatically opened when I am using other apps like Safari.

  Anyone experience this problem and no solution?

  Thanks in advance.

  Check system preferences > keyboard > shortcuts

  Make sure that "Show Launchpad" is not checked.

• float to bytes conversion using c code in labview

  Mr President, I made the taste of the float to bytes conversion using type cast in labview. now I want that conversion using the code c. means I want to know that how labview can suport code c. farmula node is not suporting my code which is working wel in labwindows. kindly help me on this subject so that my skil can be improved using labview

  The node of the formula as its name suggests is to facilitate the access of the algebraic formulas in text form and uses a C like syntax, but is in no way a fully featured parser/compiler. It supports only a subset of the syntax of C for obvious reasons. Why would you need to implement entire code C in LabVIEW for LabVIEW program supports the same functions and to do it with LabVIEW nodes, you will always have better performance you can get in the formula node.

  If you have real C code you wish to call in LabVIEW you use the node form but create a DLL from it and call it via the node library call.

• I want to export a report to several pages to CSV using javascript code... Please suggest

  I want to export a report to several pages to CSV using javascript code... Please suggest

  Hi SubhajitChakraborty,

  If you are using Internet explorer as web browser, then confirm your request in Internet Explorer development Forums.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  If you use a Web browser to explore, then look for JavaScript communities to help.

• PC cut his all when I called via Skype or use other programs

  A few months ago I bought a new desktop pc HP Envy and I'm really deal with it, but recently I'm under problems.

  A couple of weeks, my PC started all my audio muting for no reason when I got a call via Skype, at first it wasn't a problem because I could use other programs such as Teamspeak or mumble, but recently these programs get the same problems as well.

  The standard solution to make sure that the checkbox in the communication tab is set to "to do nothing" is checked as seen on this page, http://www.askvg.com/fix-windows-7-automatically-reduces-system-volume-for-games-pc-calls/

  I tried all possible combinations in the tabs in my reading and recording, but it still doesn't work.

  I added some screenshots that show what it looks like.

  

  

  Hello @Archangel52210,

  I understand that you are having problems with your new computer running Windows 8.1 where the audio is automatically inhibition. I'm you provide a document from HP support: use of the Recovery Manager to restore the software and drivers (Windows 8), which allows you to restore the original supplied with your computer drivers. As these drivers and their settings are working I think they once again and I hope when they are updated the next time Hey take better.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• I am looking to buy a new PC soon, what I have to buy a new copy of vista, or can I use my code on my new PC?

  Licensing

  I have a copy of windows vista that I installed on my laptop, I am looking to buy a new PC soon, what I have to buy a new copy of vista, or can I use my code on my new PC? I do not plan to use my laptop again once I get this PC is it possible to transfer the license via?

  No problem.

  First of all, backup all your data of the laptop if you have not already.

  When you have done this, the best way to do this is to delete the partition with Vista on it. See the website below for more information:

  http://vistasupport.MVPs.org/delete_a_partition_using_the_vista_dvd.htm

  Once you have finished deleting your partition, the laptop will have nothing about it, so you can choose to reinstall an earlier version of Windows or simply put away to deal with later. You can now legally install the copy of Windows Vista on your new machine.

• How low-level format using the code debugging?

  original title: how to low-level format using the debug code? can someone give a code

  How low-level format using the code debugging? can someone give a code

  Hi microcontrol.

  ·          What is the number and the model of the hard disk that you use?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  The Microsoft article below may help if you use a disk Western Digital or Seagate.

  Using DEBUG to start formatting

  http://support.Microsoft.com/kb/60089

  I hope this helps!

  Halima S - Microsoft technical support.