Using point of entry
I want to create an application of alarm in which once an alarm time is high, I want my applications instead of the alarm on the device screen. I found an approach in the forum using the other entry point and keep a thread continuously in the background to check the alarm time.
one problem with this approach, I found, is that, as we use two entry points to our application, different icons on device two for my application are created which I want to avoid.
the other problem is when I run the wire that's me illegalStateException. I don't know what's going wrong here. Here is the code that I use,
main:
public class CalenderDemoApp extends UiApplication {
/**
*
*/
public CalenderDemoApp() {
// TODO Auto-generated constructor stub
MenuScreen mScreen = new MenuScreen(this);
pushScreen(mScreen);
}
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
if ( args != null && args.length > 0 && args[0].equals("gui") ){
// code to initialize the app
CalenderDemoApp cal = new CalenderDemoApp();
cal.enterEventDispatcher();
} else {
// code to launch the background thread }
long REFRESH_TIME = 1000*60*5; // every 5 minutes
Timer aTimer = new Timer();
MyTask myTask = new MyTask();
aTimer.schedule(myTask, 0, REFRESH_TIME);
}
}
}
and the other Thread:
public class MyTask extends TimerTask {
// Constructor.
public MyTask() {
}
public void run() {
// TODO Auto-generated method stub
// MenuScreen mScreen = new MenuScreen(UiApplication.getUiApplication());
// UiApplication.getUiApplication().pushScreen(mScreen);
Dialog.alert("heeloo");
// synchronized(Application.getEventLock()){
// Dialog alert = new Dialog(Dialog.D_OK, "Hello", Dialog.OK, Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), Manager.VERTICAL_SCROLL);
// alert.show();sms
// }
}
}
Please help me...
Thanks in advance.
Hey I figured out that they changed the name of the Module system 'Don not display the icon of the application on the Blackberry home screen... '.
Tags: BlackBerry Developers
Similar Questions
-
Bb-ant-tool to implement using point of entry
Hello
I am able to build one application to another point of entry with JDE...
But does require no special configuration if I use bb-ant-tool to build?
Problem solved.
-
prompts the user for input, but use the last entry as departure
Hello, I am currently having a VI that I invited the user to a text and then input I use this input text thereafter. However, I would like to have the guest so that I can use the last entry of the bite as a starting point. Started the code, I do not know how to proceed. Any help will be greatly appreciated.
Thank you.
hiNi
If you add a record to offset uninitiallized and change the express vi, you can do it.
-
Original title: [ProgramName] .exe Entry Point not found
I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!
Hello
1. did you of recent changes on the computer?
Method 1:
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you put the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.Method 2:
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
Original title: Point of entry not found
I'm trying to run an old program, Manufacturer of T-Shirt Hanesand get the error, "the entry point of procedure SUnMapLS_IP-EBP_28 not found in KERNEL32.dll dynamic link library.
I'm running Vista 32 bit.
Any help would be greatly appreciated.Hello
1 see if that helps you.
Right-click on the setup.exe > and then select run as administrator to install it.
2. ask the manufacturer to program if it is Vista Compatible.
We can not help you with that that Microsoft no longer has the link Vista Compatibility Center available.
3. If the program is not Compatible Vista, install in Windows Compatibility Mode
"Using Windows 7 or Vista Compatibility Mode.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
See you soon.
-
Hi, I'm new to the development of Blackberry, I read everything on the application running at startup and have a different point of entry for this application. I still need help with my application
I use BB JDE 4.7
Simulator: BB 9530 4.7.0
I'm developing an application of SMS. (extends UiApplication)
1) there is a thread that listens for incoming messages
2) there is a wire which is a SMS sender
3) there is a main screen and two full screens. for example, when the user clicks a button in one of the screens full... I send you a message
(4) when a message is received, based on the content of the message I push either a full screen
(5) I have, all the wires and screens as the class internal to the main class that extends from the UiApplication.
I got the basic features. I need help making that demand the application of autostartup
(1) I need to start listening to the sms thread when the BB phone starts
(2) I need to have the application icon in the applications screen as another entry point for the application (only for the GUI), and the listening thread must remain active in the background.
(3) when an incoming message is detected, the application GUI should be brought to the foreground (if it isn't already forground) after posting a popup (instead of bring the application to the foreground, is it better to display a flashing icon in the status bar of the home screen blackberry and perhaps global popup)
(4) when the GUI of the application part is closed, I need to stop the sms sending thread, and when the system shuts down, I need to stop the listening thread.
Please help me guys... I have read many articles and discussions regarding the automatic start-up of applications, another point of entry, the # of background threads...
but I couldn't find how to implement my needs.
(1) should I need to create two different projects (applications [GUI thread, a sender] and one for the listening thread)? or I can achieve in single application?
(2) should I have to sign in the background thread to the GUI app? If so, how?
(3) it is necessary to use the RunTimeStore object? If so, I don't know how I can bring to the foreground the application GUI of the background thread.
(4) if I have to stop the thread of listening by overiding onExit() method, the important question I have is, if the onExit() method is only for applications that extends from the Application class and not for the UiApplication class?
(5) if I should have two projects (one main and the other as a spare point entry), which project should I do as "autorun at startup" and a "system module".
As I need to have the background still running thread when the GUI application is active. I don't know how I do.
Hello world...
I reached my needs thanks to a single application. I used an other entry point.
To refer to chk my other post
-
Thread in another point of entry of spawning
I'm looking to develop an application that has a background service and a front end GUI (2 points of entry). I understand how to have a runtime shared store so that the GUI can access data/events from the basic service. But how do I generate a thread in the background entrypoint, while in the entrypoint GUI. Should I call app.invokeLater () on the background application? Is - illegal to do if you're not in the context of this application?
Send your background request a notification using the global event.
invokelater on the instance of the application should also work, but seems a little dirty to me
-
Iexplore.exe: point of entry not found
Hello
I tried to fix this error: " iexplore.exe: point of entry not found." The procedure entry point SpoolerInit be found in the dynamic link WINSPOOL library. DRV "but could not find anything useful. He was 4-5 months because I'm having this error message appears whenever I start my laptop. It would really help if someone help me with this. I use Windows 7.
Thank you!
Frozen5
Original title: iexplore.exe error
Hello
Thanks for posting your query in Microsoft Community.
I understand that you are facing this problem, for some time.
I'll try my best to help you in the matter of fixing.
But I would like to know some information to help you better.
(1) where do you get this error message?
(2) that you get this message while accessing any program or Internet Explorer?
(3) don't you make changes before this problem?
(4) have you any questions of access to the Internet through Internet Explorer?
At the same time, I suggest you follow the following suggestions to solve the problem.
Method 1: I wish that you start the computer in safe mode and then try to check the question because, in safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.
Step 1: See the link to start in safe mode.
Startup options (including safe mode).
http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode
Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot. See the link to perform the clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair .
Additional information:
Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
I hope this helps. Otherwise, feel free to write us again with the required information and we will be happy to help you.
Thank you
-
Added that another point of entry but now cannot request signatures
I added a project in my workspace to be used for another entry point that will 'init' for the main project to add backup / restore features of my persistent data. However, since the addition of this project the opportunity to "Request for signatures" to sign my application is greyed out.
I followed the instructions in the guide to the BlackBerry Developer about adding a project to a different entry point.Serving as alternative entry point is in the same workspace as the right of the main application? If I remove the new menu item entry alternative app to request signatures returns to normal.
Well, I don't understand what the problem was, but I solved this by doing a new workspace and adding 2 projects. I couldn't make it work with the existing my original project workspace.
-
Can I launch multiple points of entry from a ThinApp shortcut?
Hi all
I'm packing a call Team Viewer application. How does traditional enforcement work is a little strange. It requires that you run an executable file to use the software, but an additional executable if you want to run the management console. This is necessary because the management console is responsible for logging and others.
When I package the application with ThinApp I get two entry points. What I want to do is to create a single entry that launches two executables at the same time (or sequence). In fact, I would prefer that the GPMC open and reduced to a minimum, but that part is not critical.
Does anyone have suggestions as to how I might accomplish this? I tried to add the two executable files to a single point of entry like this:
Shortcut = TeamViewer.dat
Source=%ProgramFilesDir%\TeamViewer\Team Viewer.exe
Source=%ProgramFilesDir%\TeamViewer\Team Viewer Manager.exe
When I do this no error is thrown, but only Team Viewer Manager.exe is started. If I change to:
Shortcut = TeamViewer.dat
Source=%ProgramFilesDir%\TeamViewer\Team Viewer Manager.exe
Source=%ProgramFilesDir%\TeamViewer\Team Viewer.exe
only then the team Viewer.exe is launched.
Thanks in advance for your suggestions!
~ spence
You can accomplish this by including a VBScript with your package. The entry point would be for Team Viewer, the VBScript code accompanying the package ThinApp will then launch the management console. See http://pubs.vmware.com/thinapp4/help/wwhelp/wwhimpl/js/html/wwhelp.htm?href=scripts_using.html for more information on the use of scripts with ThinApp.
-
Hi, I want to update the value out put of the same variable used in the entry. How to do thanks in advance
ya I got it. using the property node (and if you select value) we can do. Thans for answer
-
Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?
Hi PTTimothy
1. what operating system is installed on the computer?
2. you are the administrator of the computer?
I suggest you to check and to provide us with the information about the installed operating system.
Step 1:
You can open the administrator and verify if you can open Windows Easy Transfer correctly.
You can even check if you face the same question in the user account different or new user account. You can create a new user account on your computer, and then check.
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountStep 2:
An analysis of the SFC and audit-
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833I hope this helps.
-
How can I configure a control array by using a single entry
I am a user of LabView very newbie. I am trying to build a component control by using a single entry 4 position (a dial (0-3) that returns a result of 4-bit based on opinions. Should what command I use?
The table looks like this:
inputs | outputs
4H Open Open Open On the ground 2H On the ground Open On the ground On the ground N On the ground On the ground On the ground Open 4L On the ground On the ground Open Open I'm not there yet. I am still using the evaluation software. Can I worry when I get material. This works for now! Thank you!
-
Sorry for the ridiculously long title, but that is exactly the error I get. When I contacted my friends @ Skype that they just told me it's associated windows problem. I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...
Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.
Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question. It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.
Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted. Again, try if you wish. When you uninstall Skype, you will not lose your contacts.
Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung. You have this installed on your system? If so (or even if not), go to C:\Windows\system32 and rename avrt.dll. You can call it avrt.dlX or something else you like. Reset. Let us know if that fixes the problem. If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).
-
Original title: ntdll.dll error at boot fruity loops.
get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)
Hello
I suggest you contact support FL. I couldn't find all of the resources for this program.
Eddie B.
Maybe you are looking for
-
This morning, my Windows 7 installed the last updated. When I started again subsequently, Internet Explorer (which I hate!) my default browser and Firefox worm. 21 stated that it should be updated to 22. I did, and all my browsing history and bookmar
-
Why is the '564 Setup' cartridge not compatible for use where a 564 cartridge is required?
I just replaced the cartridges and noticed that the label says "564 Setup. My HP Photosmart Plus B210 printer gives me this error message and does not print and does not accept the cartridge.
-
I can't seem to attach a song from iTunes to my slide show in Photos v 1.2
I can not attached a song bought from iTunes to a slide show I did in Photos. The music icon that I chose a song that I think that I bought, but the slideshow plays without music. I tied with success a song do the same thing last week, but it's not
-
With the help of HP Support Assistant (Windows 8)
Hey guys,. I know that some of you are new to Windows 8. I want to remind you that windows 8 has the same function (HP Support Assistant) your laptop last was if you own one. If you don't that is fine I'll show you what I mean HP Support Assistant is
-
How can I find my question and answer
I get an email from Microsoft Answers and they need a response. But, at the bottom of the email it says do not reply directly to this email. My question is how DO I ANSWER? Should I send my email or what? The sender of the email was eddie b