prompts the user for input, but use the last entry as departure

Similar Questions

• How to put the file to open with the last entry?

  My 'sent' folder always open to the most recent entry showing the last email I sent, but, for some unknown reason, it now loads at the top of the file showing the entrance earlier. How to return to show the latest entries, the bottom of the file, rather than the top of the file?

  Click the heading labeled DATE to sort on that column. Click on the same heading again to reverse the sort.

• Serial port buffer - how to read the last entry?

  Hello

  I'm trying to read data from a device connected to the serial port. The instrument makes a row of data, last updated CR LF at pre-set intervals (0.2 seconds, 0.5 sec., etc.). I want to read the most recent line to an interval of time different (for example 1 s). What happens is that the buffer fills, and when I read that I always get the whole buffer content, starting with the first (oldest) row of data.  After reading, I empty the buffer to prevent overflow.

  From the red string I, I serach occurrence of CRLF and take the data before the game. This will give me the first line of data (oldest), sometimes incomplete.

  What I want is the last line. There must be an easy way to achieve this?

  I can't use the Frother with my instrument.

  Any help appreciated

  Sylvester

  To give an idea, put something like this you diagram:

  

• Don't forget the last entries in form af:query after navigating to the search page

  12.1.3 JDev

  Let's say I have a BTF with search page jsff with an af:query and result table. The user can navigate on this page after executing the search and do something else in the application. What I want to achieve is if the user navigates to this search page, that the previous entries of the form af:query will be pre-filled.

  Does make sense?

  corresponding AF liaison component: Query has an InitialQueryOverriden property defaults to false.

  You must set to true.

  More details here:

  http://www.jobinesh.com/2009/11/displaying-pre-executed-query-result-in.html

• Change 'prompt the user for input.

  Hi all.

  Is there any VI 'Interrogate the entered user' where do I include entries of type enum or ring? If this is not the case, how can I change the VI 'Interrogate the user entry' to do this?

  Thank you

  Francisco

  Right-click on the express VI and select 'open the front '. He converts it into a regular VI that you can modify. Or, simply create your own VI from scratch. Look at the examples of delivery for ' pop up

• is there a vi for inputs/outputs using AWG (PXI-5421) and DIG (PXI-5122)?

  Hi, I'm looking for a vi that applies to an input through the AWG (PXI-5421) signal and measures the output through the SEARCH (PXI-5122). In particular, I'm trying to apply an entry by a multiplexer, then close this channel of the multiplexer through which the entry came and then measure the output using the SEARCH signal.

  Any help will be greatly appreciated.

  Thank you.

  Hello Deepjunior,

  I understand that you wanted to find an application that will be output on an AWG device and acquire a table digitizer at the same time. While there are many methods to achieve this, the easiest starting point would be to just take a simple example of niFgen and a simple example of niScope and run them together or combine them. According to exactly what your application requires, you may need to implement additional features, but it is a good starting point.

  In particular, you can find an example of this from the example of area developer program: OR-TCLK synchronize AWG and digitizer high speed. Basically, this example combines niFgen and niScope examples and using the API OR-TCLK to synchronize devices. I recommend watching the program and trying to start from there. Hope this helps,

• my laptop keeps going to start page.__No regardless of which option to choose, that is to say. safe mode, safe mode, safe mode with command prompt, the last known good configuration, start windows normally, it's always the same

  my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people

  Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.

  As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)

  IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.

  I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.

  A. test equipment
  
  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.

  There is information about the RAM test and other materials here:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  B. retrieve data detach a healthy disk when you are unable to Windows
  
  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  C. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!

• Value of the loop variable for begins with the last entry of the previous run

  I have a problem with a loop for... I am a beginner with Labview and perhaps do not follow the order of events (since it runs not on a line-by-line as typical of programming languages), but I think that my problem is trivial.

  Say I'm running a loop for 16 iterations and I want to build a table which, for example, consists of four 0s, 1 4s, four 2s and 3 four s.   I initialize the array outside and using shift registers to be added to the matrix in the loop for.

  However, the first time I run the program I get funky results.  In subsequent runs, the first value in my table is a 3, and the rest of the rest of the table is moved down by 1, so I did that three 3s at the end (for example).

  Can someone help me understand how to solve this problem?

  Thank you

  George

  
  

• request for activation but used accsept my product key?

  keep saying my code is in use

  • Click on the button 'Start' and in the box, type start the search in the following: slui.exe 4
  • Press the ENTER key.
  • Select your country.
  • Follow the instructions for activation by telephone.
  • When finished, restart your computer.

• Avoiding the subquery retrieving all columns for the last line

  Suppose we have a table TABA:
  
  IDENTIFICATION NUMBER
  VERSION NUMBER
  THIS_COL VARCHAR2 (10)
  THAT_COL VARCHAR2 (10)
  OTHER_COL VARCHAR2 (10)
  
  Unique key is (ID, VERSION)
  
  A query that lists all the details of the last entry for each ID is:
  
  SELECT a.id, a.version, a.this_col, a.that_col, a.other_col
  TABA one
  WHERE (a.id, a.version) IN (SELECT b.id, MAX (b.version) OF taba b GROUP BY b.id)
  
  Is there a way using any other GROUPING, ROLLUP, CUBE type to get the above without using subquery?

  SELECT   id,
           MAX(version),
           MAX(this_col)KEEP (DENSE_RANK FIRST ORDER BY version DESC) AS this_col,
           MAX(that_col)KEEP (DENSE_RANK FIRST ORDER BY version DESC) AS that_col,
           MAX(other_col)KEEP (DENSE_RANK FIRST ORDER BY version DESC) AS other_col
      FROM taba
  GROUP BY id;
  

• How to get the last row and the sum of all columns in a query

  Hello

  is there a way to get the last record for a column and the sum of all the Archives to another column in the same query.

  Best regards

  You must set your needs correctly volunteers to help here...

  Your data are not good enough to bring you a precise solution. Purpose, you do not have a column, which draws a distinction between the first and the last entry.

  The solution becomes easy based on your design.

  I introduced a grouping called 'id' column and a time column called 'time_of_insert' (only this way you can say with confidence that you can differentiate between the first and last (also a foolproof solution) - you can possibly use sequence (instead of date but if you say that you can insert two lines at the same time) ((and then likely sequence would be a better choice to differentiate instead of a timestamp field) etc...)

  With your sample data, something like this can be done to get the desired results.

  -----------------------------------------------------------------------------------------------------------------------

  WITH dataset AS

  (SELECT 1 id, 10 used, 8 remain, systimestamp + 1/24 time_of_insert FROM DUAL

  UNION ALL

  SELECT the 1 id, 1, 7, systimestamp + 2/24 FROM DUAL

  UNION ALL

  SELECT the id 1, 2, 5, systimestamp + 3/24 FROM DUAL

  UNION ALL

  SELECT 1 id, 1, 0, systimestamp + 4/24 FROM DUAL

  UNION ALL

  SELECT 1 id, 0, 0, systimestamp + 5/24 FROM DUAL

  UNION ALL

  SELECT the 1 id, 1, 4, systimestamp + 6/24 FROM DUAL)

  SELECT *.

  (SELECT SUM (used) ON sum_all)

  FIRST_VALUE (stay)

  COURSES (PARTITION BY id ORDER BY time_of_insert DESC)

  last_row

  Of THE dataset)

  WHERE ROWNUM = 1;

  Output:

  ------------------------

  SUM_ALL LAST_ROW

  ------------------------------

  15                  4

  See you soon,.

  Manik.

• How to recover a database after you add a data since the last file backup.

  How to recover a database after you add a data file to a tablspace existing since the last user managed backup.
  
  PS: I am aware that the user managed backups are not used and RMAN is used these days.

  At the stage of the mount: select name from v$ datafile;
  The last entry indicates a file named /xxx/xxx/.../UNNAMEDXXX.dbf

  Now

  ALTER database create datafile ' / xxx/xxx/.../UNNAMEDXXX.dbf' as 'path_where_you_want_to_add_the_datafile ';

  The name of the data file must match the name that added in production

  This will create a data file to the required location.

  Once the file has been created, you can continue with recovery.

• I'm having a problem with the update of the last security update. What can I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: problem getting my pc to download the latest security update

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Floyd,

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  What application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  What updates you trying to install?
  What error do you get everything when trying to install updates?

  In addition to the information required:

  How to view the log of update windows

  Click Start, and then click Run.

  in the Open box, type%windir%\windowsupdate.log

  and then click ok.

  Scroll down to the last entries find the error codes associated with the last attempt to download/install.

  start at the bottom and work your way up a section that indicates an ERROR, WARNING or FATAL.

  If the appropriate copy and paste the codes of errors in this thread if someone may be able to help you.

  on the other hand, you can find the error code and other suggestions by searching the forum.

  Also check the windows file called Ko folder * .log (* = number of update KB896688 ie) and send the contents of the update has failed.

  This may even provide clues as to why the update failed.

  How to read the windowsupdate.log file:

  http://support.Microsoft.com/?kbid=902093>

• I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

  I try to capture a Web page using the Acrobat "Convert" icon, but this no longer works. I get an error message: "no access to Acrobat WebCapture. Acrobat is posibly busy or waiting for input. »

  Thanks Abhishek,

  already, this option was unckecked. But miraculously it works now (after spending hours trying...).

  Beste, Geert

• Put prompts the user for the report associated with BAM 11 g

  I have a wise distribution of the price when price report area > some user defined value. I've implemented which user promt help to filter option. In my report, there are 4 reports say Report1, Report2, report3 and rapport4 displayed at the same time. Report2 needs this value set by the user for the price to charge. But in my case, before loading the full report, it is asking for this value of price. I want to put the user defined ask prices in the associated report.is is possible? Please suggest.

  You can do this by doing two things:

  1. open report you in edit mode, select the display 'A' (if this is the first view, it will be selected by default), click on the link "Modify report properties" on the left, this will open the settings window and guests. Click on the command prompt, and then click on edit. Click Next, Next and proceed to the third stage where are the values of guests. Click on any value, and then click default (to make this value as a default)-an arrow will start pointing your default value. You can also select "All" and make it your default. Finish it.

  2. click on change display and then to the data screen, go to "Surface invite" tab and choose for your prompt display option in the title of "view".

  Save and open the report. Now, it asks you to enter a value any before loading one of the views. The default 'All' (or the default value you set) will be used to load A view and by the drop-down list of values, you can change to filter the data from this point of view.

  Thank you
  Vishal
  Development of BAM