using port 22 behind a wrt54g

Similar Questions

• Firefox uses port 80 on my XP PC?

  I hate to be lame, but I can not use WAMP as installed on my XP machine (I have two Win 7 PCs, but I'm hoping to re - develop a Web site on the XP machine). Apache 2.2 is installed, as well as an earlier version of WordPress, known for work on XP machines. The programs are installed in the respective folders are c:\wamp and c:\wordpress. Apache 2.2 always throws when starting, that's fine. When I place my mouse on the icon of the server HTTP Apache in the status bar just to the left of the clock of my machine, it displays 1 of Apache 2 running services. There is a red light to the left of the icon wampapache (void), and when I click on the Start option for her, a few seconds, I always get this message: the requested option has failed! All I can find through searching online for this problem is that I have perhaps already in use port 80 on my computer. Help! Someone saw this problem? I bought a copy of the 3rd edition of the Professional WordPress Design & Development, and so far it looks great. But until I can get WAMP running, I'm dead in the water. Thank you!

  If Port 80 doesn't work, could you try change to port 8080 by following the steps in this page of StackOverflow: http://stackoverflow.com/questions/8574332/how-to-change-port-number-for-apache-in-wamp

• 'Web Deployment agent service' using port 80.

  Hello community,

  After I uninstalled ampps (alternative to Xampp) and re installed, I get a message that port 80 is used by another application.
  I discovered in "Windows Task Manager" than (NT Kernel & System) was the culprit. After Googling further concluded that "Web deployment agent service" use port 80.

  C:\Program Files\IIS\Microsoft Web Deploy\MsDepSvc.exe' - runService: MsDepSvc

  What I've done so far was out of "MsDepSvc.exe" by spacing it epSvc.exe MsD.

  I want to know is why IIS start using port 80. Because ampps do not complain about it before!

  And what is the solution. How can I change the port for IIS?

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Port 20Gbit-channels using ports sfp +.

  Hello

  I hope to implement a cost affective solution who can use ports for uplinks on the X 2960 & switch series XR and where appropriate to the top/downlink modules for X 3750 series switch

  If someone knows if it is possible to group ports sfp + 10 GB in a channel port 20gbit?

  Whoever did this or they could point me in the right direction for documentation?

  Thank you

  Hello

  Yes, it can group several ports 10Gig on all these devices as long as you have the appropriate modules.  2960 X supports up to 24 Etherchannels and the XR up to 48.

  If you are uplnking the 2960 3750-X series, you need a 10Gig for X-3750 series module.

  HTH

• Close applications that use ports 80, 443, 8000, 8002 and 8004

  Operating system: Windows 7 Professional

  I set up a test server that is demanding that I closed all applications that use ports 80, 443, 8000, 8002 and 8004, because these are required by the Test Server. I don't know how to do this. Any help would be greatly appreciated.

  Best,

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• SNMP host on vco device using port 162

  Hello

  the documentation says:

  %<--------------------------------------------snip

  The default port of interruptions SNMP is 162. However, on Linux systems, you can open ports 1024 bellows only with
  superuser privileges. To ensure the best compatibility, the default port for listening to SNMP traps in the
  SNMP plugin is located at 4000.

  snap-------------------------------------------->%

  So, is it possible to use port 162 on the device to vco (running Linux)?

  Any help is appreciated!

  __Leo

  (to add more wood in the fire).

  The unit is THAT SLES based you can either get the iptables package from the SLES or openSUSE:

  wget http://ftp.sunet.se/pub/Linux/distributions/opensuse/update/11.3/rpm/x86_64/iptables-1.4.8-2.3.1.x86_64.rpm

  rpm - Uvh iptables - 1.4.8 - 2.3.1.x86_64.rpm

  (warning: installation of own packages is not supported :).)

  After the command

  iptables-t nat - a PREROUTING Pei udp--dport 162-j REDIRECT - to 4000

  Should do the trick.

  Note: this won't work for localhost and IPv6 will not work, and you must add it to the scripts then whenever the net or the computer is restarted to be redefined.

  I'm a little trinkets that are your devices because I checked several programs I know can send SNMP and they have IP addresses, port and community string as a parameter.

  Example:

  http://FTP.NCHU.edu.tw/MySQL/tech-resources/articles/snmp_traps.PNG

  https://VCP4.files.WordPress.com/2011/01/image0012.PNG

  http://www.Cisco.com/en/us/i/200001-300000/250001-260000/251001-252000/251186.jpg

• Why do we not use port no. 11333 for Hyperion planning?

  Why do we not use port no. 11333 for Hyperion, planning for metadata by ODI?

  More, what you need to know, when you deploy planning you will see that there is a process of 'Java RMI Registry' / service, it works on port 13333. The planning adapter communicates with the RMI registry and then communicates with the planning. If you need to know more, then look for "Java RMI" on the internet.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• could get java sdk 2.5 vi used Ports, uplinks, as "esxcfg-vswitch - l"?

  I try to get the Ports used, java sdk 2.5 uplinks vi. can anyone guide?

  Thank you

  out of runing 'esxcfg-vswitch - l' as follows:

  root@esxhost5# esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  64 4 64 1500 vmnic0 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  0 1 vmnic0 Console service

  Switch name Num used Ports configured Ports MTU rising ports

  64 18 64 1500 vmnic1 vSwitch1

  Name PortGroup VLAN ID used rising Ports

  Prod_1 5 501 vmnic1

  Prod_2 502 2 vmnic1

  Prod_3 2 503 vmnic1

  Prod_4 3 504 vmnic1

  Prod_5 6 505 vmnic1

  root@esxhost5#.

  [Take a look at the host-> config-> network-> vswitch]

  http://www.VMware.com/support/developer/VC-SDK/visdk25pubs/ReferenceGuide/Vim.host.VirtualSwitch.html

  You will find numPorts and numPortsAvailable and you can do a little math to calculate usedPorts as which is not set automatically.

  Here is a sample of how it is actually implemented in esxcfg-vswitch

  my $portGroups = $vSwitch->portgroup;
                          foreach my $port (@$portGroups) {
                                  my $pg = FindPortGroupbyKey ($netMgr, $vSwitch->key, $port);
                                  next unless (defined $pg);
                                  my $usedPorts = (defined $pg->port) ? $#{$pg->port} + 1 : 0;
  

  You can find the details if you download the RCLI and they are just standard Perl scripts, and it should help to explore the VI API and find what you need.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• FMS using port 81 relief for the Apache configuration

  Experts,

  I need to improve for HDS/HLS 4.5 FMS streaming.  I use a 2008 Server and I need to use IIS7 port 80 for existing websites.

  I would like to configure in fms.ini using ports 1935 and 81 and request Apache to port 8134.

  Can I use this configuration?   I have to open ports 81 and 8134 in the network?

  What is recommended in this case?

  Thanks in advance.

  Hello

  This should be fine, nothing recommended as such, the ports should be configurable depending on the configuration of the server. Please go ahead and make the changes and let us know if there are problems.

  Thank you!

• Setting up Port Forwarding on router WRT54G, working with a WVC54GCA Wireless CAmers

  I have the equipment in question and you need to know a few things when it come to put in place for Internet access. Before I aske the question, however, I have the following IP addresses associated with this project: WVC54GCA - 192.168.2.102, router WRT54G - 192.168.2.1, the questions are:

  1. How do you define Port Forwarding on every element.
  2. Should the two articles have static IP addresses.
  3. Once the port forwarding is set, what is the structure of the URL to access the camera?

  Any help would be appreciated, summer tear my hair on it. Seems simple, but obviously not. I'm missing something.

  Thank you

  For port forwarding, you will first need to set the camera to a fixed LAN IP address (static).

  If your router uses the range of 192.168.2.100 thanks 192.168.2.149 DHCP servers, then 192.168.2.102 is an unauthorised fixed address.  With the Linksys routers, any fixed LAN IP address must be outside the range of the DHCP server.

  Here are the rules of use of the fixed LAN IP addresses with Linksys routers.  (Note: these rules were written for the 192.168.1.x subnet.)  Since you're using the 192.168.2.x subnet, change all addresses accordingly):

  With Linksys, routers, a fixed (static) IP LAN addresses must be assigned in the device that uses the address. If you need to enter the fixed address to the computer, printer or camera, not in the router.

  When you use a Linksys router, any fixed LAN IP address must be outside the DHCP server rank (typically 192.168.1.100 thru 192.168.1.149), and may not end with 0, 1 and 255.

  That's why any fixed LAN IP address would normally be of the order of
  192.168.1.2 thru 192.168.1.99 or
  192.168.1.150 thru 192.168.1.254
  assuming that you always use the default DHCP server line.

  In addition, in the computer, when you configure a static LAN IP address, you need to set the "Subnet mask" 255.255.255.0 and the 'default gateway' on 192.168.1.1 and "DNS server" to 192.168.1.1.  Note that some network devices can not use server proxy DNS at 192.168.1.1.  In this case, the value "DNS server" your real address of Internet DNS server (found in the router when connected to the Internet).

  It is also important that the same value static LAN IP address no two devices on your network.

  **********************

  After you gave your camera at a fixed LAN IP address, then go in "Port Redirection" in the router and configuring the ports one (or more) to the address LAN IP fixed camera.

  In order to access your camera from the Internet, you will need to either:

  (1) get a fixed Internet IP address (static) address from your ISP and configure your router to use this address, or

  (2) use a free service such as DDNS.  DDNS allows you to use a dynamic Internet IP address, but can connect you by using the same URL.

  I hope this helps.

• That is the app use Port 631 IPP

  Hello

  I have a doubt, I know port 631 it's cups or ipp service, but I don't have any printer installed or configured, I recently format my Mac with the restore option as a Trojan horse, but know with only installed pages and numbers that I did with the network utility portscanning and without opening any program , I opened port 631 PPI, and do a netstat it seems local address localhost.ipp and *. * address abroad.

  My question is, which service or program might use this port if I didn't set up a printer or the printer shared on the local area network?

  Generally sound is not open, but I am concern when it is

  Thank you

  try from the command line, copy and paste:

  lsof - i: 631

  In the list use the procces xxxxx

  To release the port, kill the process using it:

  kill xxxxx

  Ref:http://www.catonmat.net/blog/unix-utilities-lsof/

• Qosmio G20: How to use port Monitor

  Hello!
  Regardless of explanation in the manual, I'm not sure to understand why and how to use the monitor to the port on the back of my G20. Everything I connect nothing happens.

  Any help appreciated.

  Hello

  You can use this port for displaying video from your digital camcorder or VCR on laptop screen you.
  In the user manual, you will find the detailed description of the devices on which you can log in and how to connect the device and the external device.
  If you n t understand the manual which is pre-installed on the unit you so you can download it in your language.

• How can I get out what uses port 80 on Windows Small Business SERVER 2003

  Hello

  We install a new CRM system, that links to an external site, on our SBS 2003.
  We are told that for the link to work we must have free port 80.
  Tried run netstat - and it makes account of nothing - and a few other programs - and they bring nothing - but running ' telnet 192.168.2.2 80 "at the command prompt an error.
  Apparently, this means that something else IS using it, according to the support team who install the software.
  
  Can anyone help!
  Alan

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• you use an image behind the waveform graph?

  Well guys, I want to know if its possible in LabVIEW.

  I know I can put an image predefined waveform graph so still when I run my program I see that image.

  But now I want to use a picture inside the graphical waveform... like a logo or something related.

  Is it possible? If so, how can I do that?

  Thank you

  How about you, making the transparent graphic background and put the image you want behind it?

• Port forwarding on Linksys WRT54G

  Hey I have problems with Port Forwarding on my Linksys WRT54G. The port, I need open is 28960. I followed guides and thought I did everything correctly, but his does not work. Here's what I've done so far:

  -J' put a static IP address and took a screenshot of my settings here:
  

  -Here is my page of port forwarding:
  

  -Under the ' security > firewall "tab I unchecked"Block anonymous Internet Requests ".
  -In addition, I tried to adjust the 'DHCP server' for people with reduced mobility
  

  Is there something that I don't forget or do wrong?

  Evreything is fine... Make sure that the DHCP server is activated (do not disable it)...

  The only reason why port forwarding does not work because this port can still report it as "Blocked", this only happens if you have an old firmware on your Linksys router...

  Update the firmware on your router, reset and re - configure from scratch and do port forwarding, see if it works...

  Download the Firmware from here

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...