Using rollover slidelets to open quizes works not properly

Similar Questions

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Manual lens correction works not properly.

  I am trying to correct the perspective of an image in lightroom or in the vertical and horizontal manual lens corrections are not working properly, they are extending to the image in a weird way. I used these cursors repeatedly but I don't know why sometimes, they stretch the image. Here's a video that shows the effect of cursors: Lightroom: manual lens correction works not properly - YouTube. I would like your opinion on this is that you know how I can solve this problem. Thank you

  Controls LR Vertical and Horizontal Correction lens are designed to 'fix' the perspective distortion. What is the perspective of "normal"?

  Normal lens - Wikipedia, the free encyclopedia

  Lenses wide angle move the vanishing points more far and telephoto lenses get the close.

  https://en.Wikipedia.org/wiki/Perspective_distortion_%28photography%29

  LR Vertical and Horizontal controls use the focal length and camera metadata from the image file and adjust the image based on its effective focal length. A goal of 200mm if on a 1.5 crop body factor has an effective focal length of 300mm, resulting in an extreme telephoto perspective. That's why you see more "stretch" the image when you adjust the Vertical control, with a focal length lenses below)<>

  The image file video YouTube has vertical converging vertical very light, slight clockwise rotation and distortion in light pad. You should be able to correct the image for parallel verticals with small values of Vertical and Rotation adjustment. I suggest using "Activate profile Corrections" (profile tab) to fix the small amount of lens distortion.

  So always questions please post the image file on Dropbox or other filesharing site and I'll take a look. Thank you.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Since the update with OS 10.11.6, flash not working not properly

  Just got a new Mac Book Pro, new on mac in general. Had a video to play on a Web site but didn't work not, downloaded Chrome, worked well. Then made the update to OS 10.11.6 (not), and the video does not work (it says: cannot load the Flash plug-in). Made sure plugin has been enabled in my Chrome. Tried to download Flash himself, tried to remove Chrome and Flash and download Chrome still once, nothing works. Now for some reason, it works... What is (and was) happening... Someone has an idea? THX!

  -Chrome has built in Flash.

  -Safari does not come with Flash and use Flash with Safari, you need to download and install Flash

  So this is why worked chrome and Safari worked after downloading and installing Flash. Make sure you just threw always get Flash from the Adobe website.  Once you install Flash from Adobe it has also installed a Flash preferences panel in system preferences and yo can update Flash from here

• HP envy 15-j104sl: display not working not properly

  Hello

  I have a Hp Envy 15-j104sl, unfortunately after a fall, the screen does not work properly: sometimes, the left part or the entire display turns white and it is impossible to use it unless I move the screen / hinges in another post.
  The glass is not broken, I think the problem may be in the base/hinges lower/some other type of contact works not very well.

  I am really disappointed with the online Hp support: I can't find location to send my laptop for repair, and I can't even call help if I have my warranty has expired.

  It's a bad display cable or possibly the display panel. It's going to not need a repair by a technician. Where do you live (country)? I'm not clear if you say your warranty is or has not expired?

• Lenovo x120e keyboard works not properly

  I have a Lenovo x120e, I bought a couple of years. Last Friday, I started to have problems with the keyboard. The first question was that the computer was save my CTRL key was pressed continuously. A single reboot did not fix this. However, by using the onscreen keyboard, I could get the computer to recognize possibly CTRL key was indeed not and my keyboard seems to work correctly again.

  However, from Sunday, I started having new problems and have not been able to solve. Specifically, the keys g and h do not work (although sometimes, if the onscreen keyboard is up as well, they will register as 5 and 6, respectively). Other keys around the Board work not (apostrophe, 5 and 6, some function keys). The on-screen keyboard works perfectly fine, as does a USB keyboard (I currently use).
  I tried the following, and none of them have helped:
  (1) virus and malware scan - nothing came (analysis complete, not just "fast")
  (2) check the performance of the equipment (an OEM utility) - no problem
  3) updated keyboard driver
  (4) uninstalled and reinstalled the keyboard driver
  5) restore to a restore point Windows before initial issue last Friday
  (6) restart in Mode safe without the attached external keyboard - same keys always had the same problems.
  So now I wonder if it's a hardware problem or a software (driver or OS) one. As I see it, my two possible options are:
  (1) If a problem with the hardware, at least try to clean and if necessary replace the keyboard
  (2) the software, wipe the computer and reinstall Windows. All my data is stored externally, while it would be annoying, is not a major issue to do this.
  I want to just make sure you choose the right course. Someone saw in which of them is most likely necessary remedy. Or if I missed a possible way to fix this without one of these last ditch effort, I would be grateful for more information.
  Thanks to you all.

  Hello Andrew,.

  I would agree that it's a hardware problem. At the same time, if you want "good" do an OS reinstall, you have nothing to lose but some time and effort.

  Kind regards

  BearPup

• Sudenly microphone not working not properly, might have something to do with the Realtek HD Audio

  Hello!

  I used my microphone every day of work for some time now and I had no problem. Indeed, the audio quality was really good. However, something must have happened yesterday because now the quality is really really bad. Levels are low, my voice is distorted, sometimes it even works at all.

  I messed around with the levels and microphone amp and everything is the same as before. I used to have my microphone attached to about 94% without any boost and the quality was very good.

  I think that I managed to reduce the problem to the audio thing Realtek HD, more precisely the improvements. I have a few options in the effects section. Speech recognition, Conference and personal appeal. I tried all of this, and while they all look horribly bad, you can hear the difference between these options.

  It's only when I use "turn the sound effects off all" I get a few audio decent. The levels are normal but there is a lot of background noise and ultimately, I won't be able to use it like this to work.

  I went on the Realtek site and I downloaded their latest HD Audio Manager. Although this seems to be a newer version than I had before, the problem is still there.

  Has anyone deals with this kind of thing before? Is there something I can do?

  I wonder if I might replace the DD Realtek Audio Manager altogether. There may be a few alternatives out there that I don't know.

  Thank you very much!

  EDIT: I connected just a USB audio interface external that I have. I have this before since I well there is no reason not to work perfectly, but I couldn't get decent levels out of it either. I used my phone as a microphone, since I have no other option on the spot, then maybe this isn't the best test.

  The only thing I did differently between Friday, when my microphone was OK and Monday, when he stopped working was plug an old USB gamepad. Who has messed up my touch screen, in the sense that it was not to accept any entry more. I just restarted my computer and everything was fine, but could he have messed up my audio also? There is no reason for that to happen...

  A final note, while an update Windows 8.1 could solve this problem, it isn't really an option for me. I am a user of Pro Tools, and from what I can tell, the 8.1 update would put an end to this.

  Hi Pantalonsfancie,

  I'm sorry for the inconvenience caused.

  Here in this scenario, I would like to know some information about this problem so that we can help you further.

  1 are you question in the face of any audio recording?

  2. you use any specific record software o record audio?

  3. that you get any error code or error message when you use this particular record software?

  4. have you checked is that the problem occurs with a different microphone?

  I would try the following and see if it works for you.

  Method 1:

  If you use a third-party recording software, then try the sound recorder in Windows 7 and check if it helps.

  See the following article from Microsoft Help to record audio with sound recorder.

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Method 2:

  Try installing the latest drivers, chipset and audio from the Web site of the manufacturer of the computer or from Windows Update and check if the problem persists.

  See the following Microsoft Help article for updating a hardware driver that is not working.

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please reply with the status of the issue so that we can better help you.

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• SQL Query Help (not working not properly)

  Hello everyone,

  I use JDeveloper 12.1.2.0.0. I do a two-way communication using 3 tables, with links between them (and using schema HR).

  In my example, I have something like:

  Departments, employees, and the SalaryByJobs (I created this table where it shows a departmentd id, employee id, salary).

  Whenever I click on one OR more departments, the employees up-to-date table by putting on the table, employees who belong to the selected department and the salaryByjob to put the jobs of the employees selected on the employees table.

  So it's something like this:

  The departments selected-> employees selected-> salarybyjbobs of these employees.

  My query used (in the view) has the following code:

  SELECT Employees.COMMISSION_PCT,

  Employees.DEPARTMENT_ID,

  Employees.EMAIL,

  Employees.EMPLOYEE_ID,

  Employees.FIRST_NAME,

  Employees.HIRE_DATE,

  Employees.JOB_ID,

  Employees.LAST_NAME,

  Employees.MANAGER_ID,

  Employees.PHONE_NUMBER,

  Employees.SALARY

  Employees EMPLOYEES

  WHERE (department_id IN (select * from THE (select cast (in_list(:variavel3) as mytableType) double) a))

  Since I use the links, the employees table does not show anything at the beginning, so I added this to my query used to go: OR nvl(:variavel3,0) = 0

  But now, whenever I try to select multiple lines, it gives me the invalid numbers and I don't understand why...

  It's only one line of code and it is not in the bean.

  Can someone help me?

  PS - The bean will Department by Department, adds the departments with ',' and for each Department, gets employees who belongs to them.

  My best regards,

  Frederico Barracha.

  The expression NVL (: variavel3, 0) = 0 is not correct. The data type of the return value of the NVL function is considered to be equal to the data type of the argument of 1 (that is, the data type of the variable binding: variavel3). You said that this variable contained a list separated by commas to ID, so the data type of the variable is VARCHAR2. As long as you compare the NVL expression of a number, you get 'Invalid number' exception, because Oracle expects a numeric data type on the left side of the comparison operator.

  To avoid the exception "Invalid number", you can modify the expression by using one of the following options:

  : variavel3 IS NULL

  NVL (: variavel3, ' *') = ' *'

  NVL (: variavel3, ' 0') = '0'

  Option 1, so the simplest and clearest.

  Dimitar

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• SWITCHABLE GRAPHICS - NO. MODE - OPEN GPL WORKS NOT - FIXED

  HERE IS MY PRODUCT INFORMATION:

  HP Pavilion g7-1226em Notebook PC

  IMPORTANT:

  All updates are insalled

  All the drivers downloaded from the official website (here)

  BIOS update version

  No missing material

  Thus, any application that I use (Photoshop, Illustrator, Lumion, AutoCad2013 and even Google Sketchup! Not to mention that Minecraft is 1-20 frames per second)

  Map USES THE LOW GPU RESOURCE.

  NO METTER what I DO (put high-performance (on battery or AC)) (see image below)

  

  What programs (which have the value high performance)

  WILL NOT USE THE HIGH PERFORMANCE GPU card (see images below)

  and so on...

  NEVER BUY AN HP PRODUCT, TRUST ME ON THIS

  FINALLY!

  So I found a site a comment that a guy has solved this problem with Windows 8.1

  I instaled Win 8.1, but still nothing.

  After a few moments of reasearching I found the drivers on http://leshcatlabs.net/ (it is under maintenance currently)

  And installed one of their latest drivers Beta (AMD_Catalyst_14.3_Beta_V1.0_Windows_B22_March12)

  and now have a FULL AMD GRAPHIC CARD WORK!

  Finally, I can use the one I paid for!

  

• Transfer of records to memory stick using Windows Explorer works not properly. (Windows 7 64-bit)

  I use sticks of memory to copy my photos and documents from my computer for backups of these elements.

  I currently have about 8 000 photos that I try to copy computer to stick.

  The total size of the pictures is about 18 GB, and I use 32 GB sticks. I have four different sticks, from three different manufacturers, and the problem occurs on all four sticks.

  The photos are in "My pictures", who are then in albums, sous-albums, then sub-sub-albums, everything in "Images", which is located in "libraries."

  Reproduction, which has more than 12 hours, it looks like it works OK, but when I check the files on the memory stick a lot are missing!

  Some photos are missing from some albums, and many albums is not there at all.

  I did this for several years, but this problem just started. (It is about six weeks, since I've finally done it.)

  Can someone tell me what I am wrong dong?

  Not all USB keys are of equal quality.

  Personally I would use a portable hard drive.

  12 hours for 18 GB of data is excessive

  Assuming that a brand PC made the mistake of using win update for "Recommended updates" rather than just Important?

  A run/installed any new utility prior to the problem occurring?