Manual lens correction works not properly.

Similar Questions

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Lens corrections do not automatically meet information

  In "lens corrections" when to enable corrections profile is not automatically fill the brand, model and metadata profile and I need to select the brand of lens manually before he will choose the model and profile and apply the changes. How can I fix it?

  After selecting your lens and information model in the profile panel, change the drop down menu (immediately below the box) setting to say save new lens profile by default.  Therefore, that the objective should complete correctly. You may need to repeat for the other cameras/lenses.

• Support for profile lens corrections are not not in Lightroom 3.2

  I installed the Lightroom 3.2 update, which includes the list of support for the 'Canon EF 50mm f/1.8 II' lens.  I pulled a number of pictures with this lens (using a Canon T1i) and load them into Lightroom.  In the metadata for the photos, the lens was called "EF50mm f/1.8 II.

  Within the "Lens Corrections" section of Lightroom, the option 'Auto' reports "Could not find a profile matching automatically."  I tried manually to the list of Canon lenses, and it is not on the list.

  In the folder
  / Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Canon/
  I see a file corresponding to this objective
  Canon EOS 5 d Mark II (Canon EF 50mm f1.8 II) - RAW.lcp
  but it is not with only one specific body.
  I tried to manually install the update to Camera Raw 6.2, but he noted "update is not applicable."  Given the above file, I suspect that it was already installed.
  In the release notes, which entered the Canon EF 50 mm f/1.8 II lens, it does not mention that the support was limited to only a certain camera body.  Could someone help me please?  Thank you!

  http://forums.Adobe.com/message/3105679#3105679

• HP envy 15-j104sl: display not working not properly

  Hello

  I have a Hp Envy 15-j104sl, unfortunately after a fall, the screen does not work properly: sometimes, the left part or the entire display turns white and it is impossible to use it unless I move the screen / hinges in another post.
  The glass is not broken, I think the problem may be in the base/hinges lower/some other type of contact works not very well.

  I am really disappointed with the online Hp support: I can't find location to send my laptop for repair, and I can't even call help if I have my warranty has expired.

  It's a bad display cable or possibly the display panel. It's going to not need a repair by a technician. Where do you live (country)? I'm not clear if you say your warranty is or has not expired?

• Lenovo x120e keyboard works not properly

  I have a Lenovo x120e, I bought a couple of years. Last Friday, I started to have problems with the keyboard. The first question was that the computer was save my CTRL key was pressed continuously. A single reboot did not fix this. However, by using the onscreen keyboard, I could get the computer to recognize possibly CTRL key was indeed not and my keyboard seems to work correctly again.

  However, from Sunday, I started having new problems and have not been able to solve. Specifically, the keys g and h do not work (although sometimes, if the onscreen keyboard is up as well, they will register as 5 and 6, respectively). Other keys around the Board work not (apostrophe, 5 and 6, some function keys). The on-screen keyboard works perfectly fine, as does a USB keyboard (I currently use).
  I tried the following, and none of them have helped:
  (1) virus and malware scan - nothing came (analysis complete, not just "fast")
  (2) check the performance of the equipment (an OEM utility) - no problem
  3) updated keyboard driver
  (4) uninstalled and reinstalled the keyboard driver
  5) restore to a restore point Windows before initial issue last Friday
  (6) restart in Mode safe without the attached external keyboard - same keys always had the same problems.
  So now I wonder if it's a hardware problem or a software (driver or OS) one. As I see it, my two possible options are:
  (1) If a problem with the hardware, at least try to clean and if necessary replace the keyboard
  (2) the software, wipe the computer and reinstall Windows. All my data is stored externally, while it would be annoying, is not a major issue to do this.
  I want to just make sure you choose the right course. Someone saw in which of them is most likely necessary remedy. Or if I missed a possible way to fix this without one of these last ditch effort, I would be grateful for more information.
  Thanks to you all.

  Hello Andrew,.

  I would agree that it's a hardware problem. At the same time, if you want "good" do an OS reinstall, you have nothing to lose but some time and effort.

  Kind regards

  BearPup

• Since the update with OS 10.11.6, flash not working not properly

  Just got a new Mac Book Pro, new on mac in general. Had a video to play on a Web site but didn't work not, downloaded Chrome, worked well. Then made the update to OS 10.11.6 (not), and the video does not work (it says: cannot load the Flash plug-in). Made sure plugin has been enabled in my Chrome. Tried to download Flash himself, tried to remove Chrome and Flash and download Chrome still once, nothing works. Now for some reason, it works... What is (and was) happening... Someone has an idea? THX!

  -Chrome has built in Flash.

  -Safari does not come with Flash and use Flash with Safari, you need to download and install Flash

  So this is why worked chrome and Safari worked after downloading and installing Flash. Make sure you just threw always get Flash from the Adobe website.  Once you install Flash from Adobe it has also installed a Flash preferences panel in system preferences and yo can update Flash from here

• Want to 750-114: 10 Start button not working not properly

  When I left click on the windows icon to set up the list of programs and 10 button to bring up the apps page to start nothing happens. It started last week.

  Don2498

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on the button start Win10 is no longer working and I wanted to help.

  People with MS by pushing the Win10 updated weekly, it is not uncommon for a working PC suddenly that things stop working.

  Here, it's a simple solution, but as shown in this thread related, is not: bar of tasks/Start button not working not!-Windows 10 Forums

  All what I can say is that you work through this thread and hopefully, any of the fixes will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• an indexer research works not properly professional xp

  No problem until 2 days ago (think Windows made a few updates) now as soon as I connect it starts windows saying the search indexer is not working properly - everything that you press a from now he keeps of bobbing upward and you literally can't do anything. Is there any solution for this?

  Hello

  ·         What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

  Method 1: Base Windows XP search indexing troubleshooting

  a. confirm that you are connected to Windows with an account that has administrator privileges. The account doesn't have to be named 'Administrator', but can not be a normal user account.

  b. click on the "Start" button, then click on 'control panel '. Double-click "Administrative Tools". If you don't see this icon, click the "Switch to Classic view" link on the left side of the window.

  c. double-click "Services." Double-click on "Indexing Service" in the window that opens. If the value displayed next to "Startup Type" to "Manual" or "Disabled", click the menu drop-down and select 'Automatic' and then click on the button 'Start '. Click on 'OK '. This should solve the problem with the index; do not continue through the steps below, except if the problem persists. If the Indexing Service is already enabled, close the 'Services' and minimize the window 'administrative tools '.

  d. click on the "Start" button and then click on 'my computer '. Right-click on your hard drive, then click 'properties '.

  e. ensure a check in the box "Allow Indexing Service to index this disk for fast searching of files". If the box is not checked, place a control inside and click on 'OK '. Note that it will take some time to apply this change to all files on the disc. If the box is not checked, the audit, it should solve the problem. If you continue to experience a problem with the search index, continue to Section 2.

  Method 2: Rebuild the Windows XP Search Index

  a. return to the 'Administration tools' window, which still has to be reduced. Double click on "Services".

  b. double-click on "Indexing Service" and click the "Stop" button in the window that opens. Click 'OK' and then minimize the window 'Services '. Now you should look at the 'Administration tools' window again. Double-click 'computer management '.

  c. double-click the entry of "Services and Applications" on the left side of the window expand the category, and then double-click "Indexing Service".

  d. right click on 'System' under 'Indexing Service' and select 'All tasks' and 'empty catalog. This forces Windows XP to empty the search index. When you restart the service, the index will be rebuilt.

  (e) to return to the 'Services '. Double-click on "Indexing Service" and click on the button 'Start '. Click "OK" and close all open windows. Let your computer rebuild the search index before you test it to make sure it works. If the problem is resolved, stop here. If you continue to experience a problem, it may be because the indexing of search works correctly, but some files on the disk are excluded. Close all open windows and continue to Section 3.

  Method 3: Configuration of Windows XP to index all files

  a. click on the "Start" button, then click on 'my computer '.

  b. right click on your hard drive, then click 'properties '.

  c. remove the control from the box "Allow Indexing Service to index this disk for fast file searching". Click on 'OK '.

  d. Select the radio button "apply changes α C:\, subfolders and files" and click "OK". Windows will exclude all files and folders on the disk being indexed. Be patient, as this process generally takes a lot of time to complete. If you receive an error, it's because indexing research cannot be enabled or disabled for some protected system files. Click "Ignore all" when prompted.

  e. Repeat steps b - d during the replacement of the check in the box "Allow Indexing Service to index this disk". Once more, be patient while you wait for this course ends. If you or another user accidentally excluded any files or folders on the hard drive being indexed, they will once more be indexed when this process is complete.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Photon: Notification light works not properly.

  I just got this phone and my notification light is not working properly it works on messages and emails but don't not during the charge or bluetooth as the manual said it would be. Help, please!

  
  

• Envy 17: Keyboard Flex, the keys not working not properly, a fan failure

  I bought my computer laptop last January 2014 to JB HiFi, I already noticed that the keyboard flexes, but they told me that it is normal and the keys work well anyway.

  Move to the last month, I noticed that the bottom surface of my laptop keeps splitting open whenever I have fold to the top of my screen to turn it on. If it can be repaired by pressing gently to close again, it seems to have caused the laptop to ask a fan failure notice every time that I turn it on, asking me to press the Enter key to continue or wait 15 seconds so it will turn off.

  I searched on youtube on how to solve this problem and I discovered that blowing fan can solve this problem quickly. I tried several times the breath of the fan before turning on the laptop but it does not always work for me. Fan failure screen always displays at startup. I could not work long hours because I noticed that my laptop has been overheating a lot, probably because of the failure of the fan. I had to turn off for a few minutes let cool and start to work again, thus breaking any momentum of work I.

  Then, five days ago I realized that Fan failure screen is not displayed, but things just got worse. Left keys do not work correctly more for example. If I press 'e', it will enter "qe", "2" will enter the '13' and so on. Now this made me suspect that the space in which the keyboard flexes a lot and the fan failure overheating left hand side of the laptop were the cause of the keys with a malfunction, maybe condensation or so.

  Please help me out here, I use my laptop for my studies and I can't afford to buy a new.

  Kind regards

  Hi K N R K,.

  I tried your method three times, but the keys are still faulty. This is the current behavior I get:

  F5 - turn on the backlight with ' + '.
  F7 – lowers the volume with ' - '.
  F8 - increases volume with ' / '.
  2. does not show '2', but active random dialog boxes (depends on the active window)
  NumLock - types "5 [---].
  w active entry
  Shift + w - paste from Clipboard
  Enter - 'L';
  4 entries "14".
  5 entries "25".
  6 - entries '+ 6'
  -entries + '+ 6'
  x - entries 'x 25 '.
  1 entries "14".
  2 entries "25".
  3 entries '3 '.
  CTRL + v - entered "s".
  FN - inputs + 6
  SPACEBAR - entered '25 4. / »
  Up - entries '.on '.
  -Scrolling and entries "14".
  0 - entered "0" and enter
  . -entries '.» 3. "

  If ever the keyboard will work properly again, you have any recommendation with the intrados cleavage whenever I have bend toward the top of the screen to turn on the laptop.

  Kind regards