Using Tc - 705 Gpu Upgrade from Acer
Hi, I'm planning on upgrading my Acer tc-705 with a MSI gtx 750ti. I had hours, or weeks of research to see if this card will work with my pre built PC or not. I came to the conclusion that it will work, but its better to upgrade my diet sooner rather than later. Can I have a second opinion here on the Acer of the community site. You think I can run this card for at least 6 months? I have a 60 (tha1) fsp 300w PSU 300 with 8A on the 12v1 rail and on the 12v2 14A. I'm more worried about the power but then all thoughts will help!
A few people have reported that the 750ti and everything worked fine with this exact power on the same motherboard. The power should be fine with FSP 300W. I have this too (and same motherboard) power and torn on what to do. I went before and just updated food... i. e I chickened out. I found a Seasonic 80 450W more gold on a Black Friday for shipped $53,00 sale.
The fan on my FSP 300W began to have a little (not really loud but boring high tone) so it was not so difficult to pronounce in the end.
I don't know the size of the map whether MSI version if it will fit or not...
Edit: but I did not buy the 750ti
Tags: Acer Desktops
Similar Questions
-
In 2009, I upgraded my laptop from Vista to Windows 7 32 bit. This laptop recently died and is no longer in use.
I am building a new computer and I want to install it on Windows 7 64 bit (there no initial operating system because it is a made to measure machine).Can I install Windows 7 64 bit on the new machine and then use the old product key, that I received in 2009, even though it was a upgrade for the 32-bit product key?If its a version upgrade, the answer is no.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
There must be a fundamental incompatibility between Win 7 and Outlook 2007. It would be nice if Microsoft looked into this right away and immediately corrects before we start trashing Win 7.
Hello oguchi,.
Thanks for posting on the Microsoft answers Forum.
Office 2007, including Outlook 2007 are compatible with Windows 7.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Office%202007&page=1If you're still having problems with Outlook 2007, it would be better to post in the Forums Office.
http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=usHope that helps.
Sincerely, Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.
How to import emails from Windows mail to Outlook. I have recently upgraded to Windows 7 and want to use Outlook 2002 for email from Windows mail program is no longer usable.
The following versions of Microsoft Outlook are fully supported on Windows 7;
- Outlook 2003
- Outlook 2007
- Outlook 2010 (when it came out)
It is recommended to always update your version of Outlook directly after installation to take care of any question of incompatibility which have been corrected.
Previous versions
Another version of Outlook is not supported on Windows 7. Although you may install it, any compatibility issues is not corrected. For example;- Outlook 2002/XP works on Windows 7, but it has the same problems remember password when using Windows Vista.
- Outlook 2000 cannot be installed in Internet Mail Only Mode (IMO) and must be installed in company/workgroup (CW Mode) Mode to prevent a mistake wab.dll.
The info source:
http://www.MSOutlook.info/question/303t-4-2
-
After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,
but unable to connect to the internet using the standard account. I have the latest version of the Solution Explorer.
How to fix this?
Glad to hear it.
If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem. -
After having upgraded from 12 to 14 of the elements now remove 12 of my mac, and if so do I need any special software. Note that I also use lightroom 5.
Thank you
Just uninstall what you would like to uninstall all of the software on a Mac:
-
I am Master Collection CS6 owner for a little over a year and am slowy upgrade from older versions of programs. Still using DW MX 2004, but now need to put in place DW CS6. Looking at my downloaded packages I see DW CS6 anywhere. Grateful for the help on it so I can start using DW CS6. / Curt
If you own the CS6 Master Collection and no other product CS6, then this is the product, you must install. No one else will not activate with your Master Collection serial number. Through the Master CS6 Collection, you install the individual applications. Dreamweaver should be included in this Collection. You can see all the applications of the Master Collection on the next page: multimedia design software | Adobe Creative Suite Master Collection 6
-
Hello, as I did an upgrade from Windows 7 to Windows 10. I also upgaded to Lightroom 6.2.1. Now it always crashes when I did crop, straighten up or deleting photos. I always have to restart lightroom after that. It then sends a message to Windows. But gave any help. I had him just ended a cht with Adobe on this matter, they gave me your forum. Can someone help me, please? Ivo
First of all, try to disable the GPU: https://helpx.adobe.com/lightroom/kb/lightroom-gpu-faq.html
What type of GPU do you use?
-
GPU upgrade 2 GB Evga GTX 550 Ti suggestions?
I am looking to upgrade to a 970 GTX Gigabyte G1 Gaming or an EVGA if I'm looking at other brands as well.
Budget around $350.00 USD.
I'm still doing research and research with options open but I'm really more leaning to the Nvidia 970.
My CPU is limiting the PCI-E x 16 running at 2.0 speeds, but even with that, I think that the 970 would be
the best choice in the GPU upgrade. Thoughts or alternatives? You want something that works long term and not just
buy something cheap, until the next thing comes.
I'm NOT a gamer I mainly webdesign so a lot of image, video and audio editing. I'm more a combination
between an advertising marketing exec and a web developer with programming in PHP, JavaScript and all back-end
stuff with databases and also web video and audio stuff etc... I just combine it all in the title of Web Designer for the conversation
who actually confuses real webdesigners because I build a LOT more than just html and css pages.
It is a type of prosumer system where it is used for work and entertainment. Watching movies and streaming video
This works well on the current computer and I actually don't really need more of an upgrade beyond the GPU as this computer
It meets my needs and has 2 years. I expect to keep for a few years, I have built computers that will last
me 3 to 5 years, will eventually build a new, but for now everything works great.
I honestly don't care about having the biggest and best just something that will work for more than a year or two and meet my needs.
But it seems that the GPU tech is going through a revolution where the old technology begins to be depreciated and will not be taken in charge a large part
in the future I am looking to get a new video card might as well go with the new stuff now so it will be supported in the long term
everyone at some point.
I'm just confused by models and manufacturers or resellers who slap their label on Nvidia technology. Who is the best with little no.
problems. EVGA seems to be popular, it's my current card brand, but I like the Gigabyte G1 with additional display ports and
possibility of having 4 monitors at the same time IF it can be inserted into my system, it's HUGE.
-------------------------
Hardware specifications:
PSU: VisionTek 800W < == will be upgrade to a 750 or 850-Watt Seasonic, Antec or Evga also.
Motherboard: Gigabyte GA-H61M-S2PV ver 2.0
CPU: Intel CPU i7-2600 @ 3.40 GHz Stock using stock intel cooler fan
HD: 3 x - 1 to disk WD Blue and two black discs
Memory: 16 GB Ram 2 x - 8 GB memory-crucial
The blue drive is the system drive to the approximately 700 GB of the disk format and divided in two with
Windows 7 64 bit Pro and 8.1 of Windows in dual boot. No SSD not because of the MOBO only being 3 GB and not 6.
It was custom built by a store of the local computer that is off from where go out of business.
The upgrade of processor or motherboard is NOT an option that some purchased software is old school licensed
with attached directly to the CPU and the MOBO that cost more than the entire computer to buy
licenses (not associated with Adobe Professional software). In addition the upgrade MOBO or CPU, you are required to
Microsoft to buy a new license for windows and windows 7 can probably just reactivated windows 8 can not.
This motherboard is a motherboard micro, I didn't know that until recently. I did not build the computer myself.
I had no idea of what food was until a few days ago, but everything worked 100% for about 2 years.
I'll have to update the bios of the motherboard before actually being able to use the new video card, but others have the same model
and it seems to work as well... I have a request to Gigabyte but just to check before actually buying.
Remember though it is a Ti 550 video card I currently have and almost any update would see great improvement.
Physical size wise how much greater is the 970 compared to 550 it 2 GB Evga gtx? I add 2 GB because it
are other 550 which are totally different aspect that my card.
Also if you have any suggestions for the PSU that would be much too. So far Seasonic, Antec and EVGA are brands that seem to
forthcoming models much earlier. Not sure about the rating as some out Bronze models perform other models gold or Platinum so...
Budget about $150.00 USD for a new power supply too.
Thanks for reading this and for any suggestion, sorry that I can't upgrade mobo or cpu to be able to run amok with ideas, it is some what may be limiting.
Essentially, it's the GPU and PSU will extend my current level of use of a few years and the GPU has better performance even with
the other tech and bottlenecks in this particular system.
Like Bob of the Peru said. The money you would have spent on a GTX 970 would have been much larger than any improvement in performance that you could achieve (on a systemic basis, not only a specific component). In fact, the cost of a single GTX 970 would have been almost as much money as the rest of your entire system combined - and yet, the upgrade provides more than an improvement of 5 to 10 percent in terms of total return.
Very recently, I upgraded an i7 - 3770K and Z77 to an i7 - 4790K and Z97. Mainly because I wanted to spend my project/player and cache drive to SSD (s) in the not too distant future. (The Z77 supports two SATA 6.0 Gbps ports and 4 SATA ports 3.0 Gbps in native mode, which is the impetus for this upgrade). But in order to take account of the upgrade of the CPU, I had to get off my GPU slightly to a 660 GTX for a GTX 750 Ti (for my particular workflow, GTX 750 it performed almost as well as the GPU high-end in terms of overall performance of the system).
That said, there are reasons to move a GPU for a GPU to budget (or even ultra-low-budget, for that matter) to a 'Warrior' or the 'monster' GPU. But improving rendering performance on such a limited as LGA 1155 Sandy Bridge platform is not one of them. And a GPU upgrade is valid IMHO only if the rest of the construction of PC is to speed - with a much higher total system start-up costs.
Moreover, a single 1 TB WD black or blue (versions WD10EZEX and WD1003FZEX, respectively) may not achieve the best 180 - ish MB/sec - and it's on the outside tracks of his tray. A HDD WD four-year-old (Blue WD10EALS or Black WD1002FAEX) at 7200 RPM have barely hit 125 MB/s on the outside rails. As such, with disks one alone, I agree with the other responses: remember to save it upward to an i7-4790 a W97 chipsets motherboard instead of lose a single penny on this generation i7-2600/H61 (your current system, by the way, is completely maxed out on RAM to only 16 GB total - and you can not pass the RAM any more far away).
In other words, your current PC is, indeed, obsolete (as in "cancelled" or 'is there something better now in this category', not ' is no longer useful or usable").
-
VPN access no longer works after upgrade from 10 IOS! Any input to fix?
VPN access no longer works after update IOS 10! With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN. Suddenly, he broke Monday after the upgrade to IOS 10. We have experienced many versions of IOS, and it has always worked. Any patch available?
Hello howlindaug,
Thank you for using communities of Apple Support.If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:
Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
Alternatives for PPTP VPN connections
Try one of these other VPN protocols for authentication by user that are safer:
- L2TP/IPSec
- IKEv2/IPSec
- Cisco IPSec
- VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall
Best regards.
-
Why the scroll bar arrows disappeared from Firefox when I upgraded from Fedora 17 to 18 years?
Recently, I upgraded from Fedora 17 to 18 of Fedora. Before the update, Firefox worked perfectly. Now, the arrows have disappeared of the scrollbar on the right. How can I get back them?
This problem is not moved in other applications - in Firefox.
Alternatively, you can check for problems with the file localstore.rdf.
Do you have a scroll bar (that is, only the buttons have disappeared)?
You use the default theme of Firefox (Tools > Modules > appearance)?
You can attach a screenshot?
- http://en.Wikipedia.org/wiki/screenshot
- https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
Use a type of compressed as PNG or JPG image to save the screenshot.
You can try to check if another theme or icon pack Linux brings them back.
-
Can E540 - I disable discrete gpu (Optimus) from the BIOS?
Hello.
I think with the purchase of a Thinkpad E540 with a gpu discrete nvidia.
I intend to install linux on it and I really need optimus for him (nor is it well supported), but sometimes I'd like to be able to use it under windows.
I would like to know if it is possible to completely disable the gpu nvidia from the BIOS so that it only works with the intel integrated an or should I buy one with gpu intel only.
I read that the lenovo changed the implementation of bi - gpu on the newer generation thinkpads.
I did some research but I couldn't know exactly what are the BIOS options; most of the results are on older laptops of gen.
If any owner of this specific model could anwser would be great
Please attach a screenshot of the settings of the bios if possible.
Thank you.
When you switch to discrete nvidia fits in the lowest power state, basically it is turned off. It will not be displayed in the Device Manager.
-
Windows 7 upgrade from Vista crashes at 72%.
My Windows 7 upgrade from Vista stopped at 72%. After the reboot, I am unable to restore or continue the upgrade. Portable computer continues to restart, but still ends upward with the error message. "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. "No disk Windows 7. Only received online.
Hello cdrudd, welcome.
We start back up your data first, if you have a Windows Vista recovery or install CD/DVD, try this:
1. connect an external drive or flash drive
2. place the CD of Windows Vista in the status bar, and close
3 boot the disk and choose "repair my computer".
4 choose "Command Prompt"
5. type the following command:CD c:
| Come in
users of CD
| Come in
dir
| Come in
From here, take note of what your user name folder name. Then type...
copy c:\users\yourusername e:\users
| Come in
* ' e' will be the letter of your external device. It could be F, G, H or so now (according to which drive letter was already used)
Once the copy is complete, you can pretty much use the following commands to keep the rest of the data:
copy c:\program files e:\program files -copy everything in the folder program files
You can use the dir command to view the contents of a directory. Then, you can use the cd command to navigate to a directory.
Let us know if you have a copy of your user data backup job. Please let us know if you have any questions.
Thank you!
Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Upgrade from XP to Vista, how do I remove the Points of XP restore
I upgraded from XP pro to Vista Ultimate. I tried to delete old restore points left by XP using disk cleanup. No luck. I do not search the forum, but whenever the answer is; "use disk cleanup. Your suggestions are welcome.
Access to the System Volume Information folder
http://support.Microsoft.com/kb/309531 TaurArian [MVP] 2005-2010 - Update Services -
My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
Although of course, the CD-ROM drive worked during the upgrade.
I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
PXE - E6i:Media Test Failure, Check Cable
PXE - MOF: Exit PXE Rom
During the audit of each Properties in Device Manager devices", I learned that they both work correctly. In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
Can someone help me please?
Best regards
JohnBesides what abdelhak says:
The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.
Hope this helps,
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
In the attached tcp_Registry.vi, the vi uses "research 1 D Array function. I can't understand why this function cannot find the index of the input element, since the entries for the game to function...
-
Silverlight, what exactly? I don't understand
im not understanding why I downloaded silverlight? /
-
How can I make a jpeg as a screesaver attachment?
I have CEPA file I WANT to MOVE SO I can use it asa screensaver. It is currently an attachment. where can I move to? can be used in this format?
-
When the cd is being ripped off. It used to and doesn't work anymore. I use Kaspersky Antivirus and when I installed the latest version, the CD information appeared is no longer. Help
-
How to display the Html string into the field
Hi guys. IM using Eclipse with jre 4.5. I need display text html (example"a textother tags... ") This text, I have to a String. I've read a lot of forums about this but never found. Can someone help me? Im trying using the browser, but it is not good