After having upgraded from 12 to 14 of the elements now remove 12 of my mac, and if so do I need any special software.  Note that I also use lightroom 5.

Similar Questions

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not import the m2ts in first CC 2015 files after having upgraded to Windows 10.

  Hello! I have a problem after having upgraded to Windows 10. Please help me.

  I upgraded the operating system to Windows 10 by windows update.

  After that, I had some problems with language settings keyboard, so I have made a new account.

  Now in my PC, there is first CS6, CC, CC2014, CC2015.

  After upgrade, I can not import M2TS in CS6, CC2014, CC2015, and latest projects with M2TS files cannot load those, just to show the question icon.

  When I try to import M2TS newly or connect, they show a popup message with "the file has an unsupported compression type.".

  Import M2TS is possible in CC.

  I want to know how to fix it.

  Trash all your media cache. Rename the folder in the files, and then try again.

• I get a deactivation notice on Lightroom 6 having been transferred all the information from my old mac again I. Dude I have Mac's wiped and so off Lightroom. I also use Lightroom 6 on a Mac book air. What should I do?

  I get a deactivation notice on Lightroom 6 having been transferred all the information from my old mac again I. Dude I have Mac's wiped and so off Lightroom. I also use Lightroom 6 on a Mac book air. What should I do?

  Hi mbaye,.

  I rectified the issue of licensing. You should now be able to activate.

  Please confirm when done.

  Kind regards

  Assani

• If I move my pictures from my macbook air to the icloud storage remove them from my disk hard mac without them moved from the icloud?

  If I move my pictures from my macbook air to the icloud storage remove them from my disk hard mac without them moved from the icloud?

  Hello there, bfo4nne.

  Looks like you are trying to manage your iCloud-storage space to save space on the hard drive of your MacBook Air. The following Knowledge Base article provides a well rounded explanation of managing storage iCloud:

  Manage your iCloud-storage space

  Thank you for reaching out to the communities of Apple Support.

  Sincerely.

• A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  The iPad does not have a SIM card. Most are wifi only.  The USB jack on the side of a machine very likely does not provide enough current to recharge an iPad. Use the power supply provided 2.1 watts (if you have one - if it isn't get a).

• When I import pictures from my iPhone 4s in the Windows Photo Gallery, some come head down and cannot be rotated. Error code 0 x 80070057

  original title: Error Code 0 x 80070057

  When I import pictures from my iPhone 4s in the Windows Photo Gallery, some come head down and cannot be rotated.  Error code 0 x 80070057

  I use Windows Vista.  Help, please.

  Paint has definitely worked for me!  I tried to in WLPG (open with paint) then shot and recorded in the paint.  It is automatically changed in WLPG.  Thanks for the suggestion.

• I have Adobe Acrobat XI Pro on my computer and it works fine but now received a new computer (MAC) and want to install Adobe Acrobat Pro XI. I have the CD but no serial number. I think it was an upgrade. I have the client of # and the serial numbers for b

  I have Adobe Acrobat XI Pro on my computer and it works fine but now received a new computer (MAC) and want to install Adobe Acrobat Pro XI. I have the CD but no serial number. I think it was an upgrade. I have the client of # and the serial numbers for Adobe Standard 8 and 9 upgrade.

  Your serial number appears on your account page?

  https://www.Adobe.com/account.html . for numbers on your Adobe page... or

  Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

  Thank you.

  I came across the solution. In addition to download creative cloud, I needed to return to the site and download the trials for the programs I want to use - Photoshop and Lightroom. Once I did, I was in business. Save bad if this was done in light on the download site.

  Thank you

• BSOD after windows upgrade from Home Premium to Vista Ultimate

  Hello

  I have a brand new A200 - TH1 comes with Vista Home Premium installed Edition. I had to install Vista Ultimate to get the job in Sql Server 2005 Reporting SERVICES. Upgrade Windows at all times managed without problems or errors. The problem is that my system gets now BSOD about 20 times a day. Its extremely unstable. I have restored to Home Premium using recovery disks, everything is stable until I apply vista ultimate improvement. I tried the upgrade without having to install any other software, shortly after my system crashes with BSOD 0 x 00008086. Any help would be greatly appreciated. Vista Business Edition would be the surface, but there is no upgrade for this. I am very confused as to why a skeleton of the system from vista home premium to vista ultimate would cause my sysytem so unstable... IF I run the windows upgrade advisor it says the following: (I installed the lastest 4965AGN driver and Bluetooth supplied with the system is the last available (5.0.1023.0)

  ACPI Bluetooth
  After you install Windows Vista, this device will require an updated driver. For the latest driver, go to the Web site of the manufacturer of the device or contact you the retailer.

  Numtxpackets® Wireless WiFi Link 4965AGN
  Before you install Windows Vista, go to the device manufacturer's Web site to download the latest driver for this device. After you install Windows Vista, install the registered driver.

  Any help would be greatly appreciated...

  Hello Jack

  I imagine that you have these problems, because a few months ago, I read an interesting article on this update and it was written on possible problems after the upgrade procedure. I installed a few times Ultimate on my A200 but as new installation.

  What you can try is to install the OS by using recovery media, delete all the stuff designed by Toshiba, including all other software like Norton. After doing this upgrade brand.

  When the upgrade is complete, install all the stuff of Toshiba order following facilities described in the instructions for Installations. I A200 with Vista Home Premium but I don't have a media Anytime upgrade and cannot test with my Satellite.

• After having upgraded a catalogue-LR3 LR4 - your keywords arrived properly - assigned to the images?

  I just noticed that my list of keywords has arrived in good shape after upgrading, but the number of images to which they have been applied, does not.

  Contrary to what http://forums.Adobe.com/message/4269602#4269602 where it was said that zero images would have requested the help of keywords, I have many for whom the LR4 catalog says just I wish 1 image tagged with him

  It's very strange.

  And disturbing.

  For one of my use case, where I would use the keyword to restructure my files as smart collections, it's easy (but bulky) of rework.

  For many others, it would not, as I really watch content (people in image, instead of the face recognition).

  Has anyone of you have a similar problem?

  I'm not sure if I should read metadata from files to correct... need to check through LR3 first, if I had been more consistent in the backup that I thought I was...

  Cornelia

  Cornelia - I wrote:

  There's a pattern to this keyword attribution error: if I have just 1 image labeled, it belongs to the key in alphabetical order and is marked by mistake with that extra.

  Can give you a simple example of how this looks in LR3 and after conversion into LR4? Thank you!

  Beat

• How can I fix mini slow mac after memory upgrade from 4 GB to 16 GB

  I have a Mac Mini (ver 6.2 end 2012, i7 to 2.3 GHz, OS X 10.10.5) that I just put new memory to upgrade to 4 GB 15 GB (Crucial 16 GB = 8GBx2 kit corresponding blades plug their scanner software and HW Apple specs). I use HDMI to my Vizio 32 inch HDTV and now my Mac runs slower for typing, clicks, etc, but the software seems to work fime. I have checjed the "about this Mac" and it shows the memory is available and authorized to use. I also run app "Cleaner" memory and it shows the total memory available and currently in use.

  Then what should I do to solve the slow?

  Thank you in advance fr that all help someone of you provide.

  Ron/Nightstyles

  I run a mini end 2012 with 16 GB.  It's fast... I also have SSD which also provides the spectacular for startup performance improvement and any disk activity.

  Have you checked for any process out of control by using the activity monitor?

  https://discussions.Apple.com/message/20379601#20379601#20379601

  Have you reset the NVRAM and SMC memory since installing the RAM?

  Restart and hold down the command-Option-P-R keys immediately after you hear the startup sound.

  How to reset the NVRAM on your Mac - Apple Support

  To reset the SMC?

  Basically the kindly stop and turn off the power for 10 to 20 seconds.

  Reset the management system (SCM) controller on your Mac - Apple Support

  After resetting these go check the keyboard settings in system preferences...

• HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

  Equipment:

  HP Officejet Pro 8600 more

  MacBook Air mid 2011

  Mac OS X Lion 10.7.5

  ASUS router DSL - N16 (new)

  I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

  My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

  Details of what I tried:

  1. Uninstalled HP software.
  2. System preferences / Print & Scan - removed all printers.
  3. On the front of the printer: you click Network and disconnected.
  4. Off, computer, printer and router.
  5. Tour of router on. The printer is turned on.
  6. Used the wireless configuration wizard.
  7. Chose my router - "Found WPS router".
  8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
  9. Turned computer on - check the connection to the router OK.
  10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
  11. Option to download and install the software of Apple-selected.
  12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
  13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
  1. Go to support.hp.com/gb-en/drivers - type in the printer model.
  2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
  3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
  4. Click the HP Installer dialog box. Ignored HP ePrint offer.
  5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
  6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
  7. Software installed with success, but still need to configure the device. Press to continue.
  8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
  9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
  10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
  11. Back to the installer - congratulations! Successfully installed.
  12. Utility HP ok - prints ok.
  13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
  14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
  15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
  16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
  17. Try Apple Image capture - no devices specified in the list of devices.

  Hello

  First, make sure you have the latest firmware installed as follows:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

  Then, try the following:

  1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
  2. Select Network Configuration.
  3. Select direct Wireless Configuration.
  4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
  5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
  6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

  Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

  On your screenshot, it seems that your router do not transfer packets to multicast to the need...

• Internet connection problem hp dv6-1127ee after having upgraded to windows 7 ultimate

  I upgrade my windows vista to windows 7. Everything went well but I can't access the internet wireless or cable. I try manything as IP reset or uninstall the driver. Also install the updated hp website driver. I tried safe mode and connection! What should I do?

  Hello

  If it connects in safemode, then it could happen due to the software antivirus installed on the computer.

  First try to connect again by turning off the antivirus or any security software installed on the computer or perform a clean boot >

  If it works then uninstall - reinstall the security software and update.

• I need to do a restore on my laptop but I upgraded from premium to ultimate on the line, the restoration will cost the factory how to re - install my upgrade printed only email to purchase

  I have a Sony Vaio VGN series laptop PC that is corrupted and requires a complete restoration of the factory. Recovery discs when it's upgrade in place, but I'm not sure that it will be part of the recovery. I have the original e-mail printed purchase for online upgrade, including the key I will be able to use it again on the same laptop, it was installed on?

  The first thing you need to do is to get your Windows 7 Ultimate Anytime Upgrade key:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Home Premium or Ultimate.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
   
   
   
  -Samsung uses ESC on most of its systems
   
  -HP use F9 on most of its systems
   
  -Fujitsu uses F12 on most of its systems
   
  -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

  -Dell uses F12
   
   
   
  In general, look at the screen during the POST for a tip for what is possible.
   
   
   
  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
   
   
   
  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click Enter a key, enter the Windows 7 Ultimatekey request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.
   
   
   
  ---------------
   
  Go to reactivate the license again.