Using the data to merge to envelopes, but need space to close to 1 address line
Hello
I created a data document merged for the return address envelopes.
Problem is, some in the source of the address data have 1 line address and some have 2 lines.
I put the InDesign Document for both lines, but when an address has only 1 line, there is just a black space where the second line of the address would have shown there was data to greet him.
Is there anyway to make this space close automatically, when no address line 2 is available?
Thank you
Babs
iBabs2 wrote:
Hello
I created a data document merged for the return address envelopes.
Problem is, some in the source of the address data have 1 line address and some have 2 lines.
I put the InDesign Document for both lines, but when an address has only 1 line, there is just a black space where the second line of the address would have shown there was data to greet him.
Is there anyway to make this space close automatically, when no address line 2 is available?
Thank you
Babs
In the Options of investment content dialog box, there is a check box to remove blank lines for empty fields.
HTH
Kind regards
Peter
_______________________
Peter gold
Know-how ProServices
Tags: InDesign
Similar Questions
-
iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc. and still nothing. What can I do?
What methods have tired to get it activated?
You can disconnect from the iMessage
Disconnect from the iCloud
Reboot your phone
Reconnect
Wait iMessage activate
Do you have a viable data plan?
-
migration from 10g to 12 c using the data pump in
Hi, while I used the data pump at the level of the schema before, I'm relatively new to the full database import.
We are trying a full database migration to 10.2.0.4 to 12 c using the complete method of database data pump over db link.
the DBA has indicated to avoid move SYSAUX and SYSTEM objects. but initially during the documentation review, it appeared that these objects are not exported since the TRANSPORTABLE given target = system NEVER. If anyone can confirm this? done import and export log refers to the objects I thought would not:
...
19:41:11.684 23 FEBRUARY 15: Estimated TABLE_DATA 3718 objects in 77 seconds 19:41:12.450 23 February 15: total estimation using BLOCKS method: 52,93 GB
19:41:14.058 23 February 15: object DATABASE_EXPORT/TABLESPACE of treatment type
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'UNDOTBS1' already exists
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'SYSAUX' already exists
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'TEMP' already exists
20:10:33.185 23 February 15: ORA-31684: TABLESPACE object type: 'USERS' existing
20:10:33.200 23 FEBRUARY 15: 96 objects TABLESPACE finished in 1759 seconds 20:10:33.208 23 February 15: treatment of type of object DATABASE_EXPORT/PROFILE
20:10:33.445 23 FEBRUARY 15: 7 PROFILE items finished in 1 seconds 20:10:33.453 23 February 15: treatment of DATABASE_EXPORT/SYS_USER/USER object type
20:10:33.842 23 FEBRUARY 15: 1 USER objects ended in 0 seconds 20:10:33.852 23 February 15: treatment of DATABASE_EXPORT/SCHEMA/USER object type
20:10:52.368 23 February 15: ORA-31684: USER object type: 'OUTLN' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'ANONYMOUS' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'OLAPSYS' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'MDDATA' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'SCOTT' already exists
20:10:52.368 23 February 15: ORA-31684: USER object type: 'LLTEST' already exists
20:10:52.372 23 FEBRUARY 15: Finished objects USER 1140 in 19 seconds 20:10:52.375 23 February 15: object DATABASE_EXPORT/ROLE of treatment type
20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'SELECT_CATALOG_ROLE' already exists
20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'EXECUTE_CATALOG_ROLE' already exists
20:10:55.255 23 February 15: ORA-31684: object ROLE type: 'DELETE_CATALOG_ROLE' already exists
20:10:55.256 23 February 15: ORA-31684: object ROLE type: 'RECOVERY_CATALOG_OWNER' already exists
...
the most insight.
The schema SYS, CTXSYS and MDSYS ORDSYS are not exported using exp/expdp
DOC - ID: Note: 228482.1
I guess that he has already installed a 12 c software and created an itseems database - so when you have imported you have this "already exists."
Every time the database is created and the software installed by default system, sys, sysaux will be created.
-
How to use the date with the report parameter format
Hi all
How to use the date format with this tag function,
<? param@begin:P_FROM_DATE? > <? $P_FROM_DATE? >
This date of form source of report and setting is coming as this 2012/11/01 00:00:00.
So now I need this in MY-DD-YYYY marker. I tried like this..? param@begin:P_FROM_DATE? > <? $format - date: P_FROM_DATE; ' DD-MON-YYYY '? >
but its giving error. Can someone pls how to convert to the format of date custom.
Thanks and greetings
Srikkanth.MProblem solved.
REF this link
-
the advantage of using the date dimension.
Hi gurus,
I have a table of facts with 5 different dates as the shipping date, the order date.
My question is
Case 1. in fact, table I store date_keys (substitution integers) and create several date dimensions (alas) for each type of date as a date_dimension alias for the shipping date, an alias for the date of the order etc (in the model of declaration).
Case 2: I just avoid using the date and just store date dimension (no integers) in fact table.
In this way I will save 5 joints in 5 dimensions of different date.
Note: I have need of these 5 participates in the declaration of model that will be used to create reports, not in the model ETL in dimension model ETL that one date will be there, but we must create on alias the dimension date for each type of report date.
So, I was wondering what is the advantage of using the date dimension?It is more a question of design/statement of a question of ETL/ODI;).
The advantage of the dimension is that you can select or aggregate data by year, weekends, quarter, month, day of the week...
If you only keep the date, you had all these complexes of the formula in logic or calculated items columns (assuming you are using OBIEE). Performances will be affected and the code will be duplicated in many places.Hope that it answers the question.
Jerome
-
Can I use the data dictionary tables based on RLS policy?
Hello guys, I use the package level security line to limit certain lines to some users.
I created several roles, I want to just enable certain roles to see all the columns, but the other roles, I'm not that they see all the lines. I mean to do this I use the session_roles table data dictionary however it did not work.
What to do in order to not allow rows of user roles?
Can I use the data dictionary tables in RLS?
Thank you very much.Polat says:
What to do in order to not allow rows of user roles?
Can I use the data dictionary tables in RLS?Ensure that:
SQL> CREATE OR REPLACE 2 FUNCTION no_sal_access( 3 p_owner IN VARCHAR2, 4 p_name IN VARCHAR2 5 ) 6 RETURN VARCHAR2 AS 7 BEGIN 8 RETURN '''NO_SAL_ACCESS'' NOT IN (SELECT * FROM SESSION_ROLES)'; 9 END; 10 / Function created. SQL> BEGIN 2 DBMS_RLS.ADD_POLICY ( 3 object_schema => 'scott', 4 object_name => 'emp', 5 policy_name => 'no_sal_access', 6 function_schema => 'scott', 7 policy_function => 'no_sal_access', 8 policy_type => DBMS_RLS.STATIC, 9 sec_relevant_cols => 'sal', 10 sec_relevant_cols_opt => DBMS_RLS.ALL_ROWS); 11 END; 12 / PL/SQL procedure successfully completed. SQL> GRANT EXECUTE ON no_sal_access TO PUBLIC 2 / Grant succeeded. SQL> CREATE ROLE NO_SAL_ACCESS 2 / Role created. SQL> GRANT SELECT ON EMP TO U1 2 / Grant succeeded. SQL> CONNECT u1@orcl/u1 Connected. SQL> select ename,sal FROM scott.emp 2 / ENAME SAL ---------- ---------- SMITH 800 ALLEN 1600 WARD 1250 JONES 2975 MARTIN 1250 BLAKE 2850 CLARK 2450 SCOTT 3000 KING 5000 TURNER 1500 ADAMS 1100 ENAME SAL ---------- ---------- JAMES 950 FORD 3000 MILLER 1300 14 rows selected. SQL> connect scott@orcl Enter password: ***** Connected. SQL> GRANT NO_SAL_ACCESS TO U1 2 / Grant succeeded. SQL> connect u1@orcl/u1 Connected. SQL> select ename,sal FROM scott.emp 2 / ENAME SAL ---------- ---------- SMITH ALLEN WARD JONES MARTIN BLAKE CLARK SCOTT KING TURNER ADAMS ENAME SAL ---------- ---------- JAMES FORD MILLER 14 rows selected. SQL>
SY.
-
Using the data of EBS in BI Publisher
Question: Is it possible to directly use EBS data in BI Publisher? If so, can you point me to the documentation?
Here's the scenario:
Imagine that our company uses Oracle E-Business Suite. All the columns, tables and diagrams Oracle related to BSE. It is the backbone of our company data. Couldn't live without it.
We're also crazy to OBIEE, especially BI Publisher. We have people who are experts in BI Publisher.
The CEO of the company would like to enjoy the mountains of data available in EBS, but also the expertise of the people who are trained and skilled in BI Publisher, using the data of EBS directly in BI Publisher. The Director-general provided us with a budget and staffing appropriate to perform a single installation of all structures must be added, or middle, for this to happen.
Objective of the Chief Executive Officer is for data additions and revisions in EBS will be included automatically in the reports BI Publisher. Assuming that between Monday and Tuesday, none of the structural changes that occurred in any of the EBS diagrams, tables or columns, assuming that everything we have done is add and/or modify data from BSE, then the BI Publisher reports must reflect the Monday data Monday and, without having to do anything in the meantime, reflect the Tuesday data just sitting Tuesday and running the editor of BI reports Tuesday morning. Not every day to rebuild XML files or something like that. Just clean and totally transparent use of the EBS data it gets added and updated during the normal course of business.
In general, what steps do we need to carry out - in EBS, in the XML Editor (if any) and BI Publisher - to directly use the data of EBS in BI Publisher on a daily basis as described above?
Ideally, I like just go to the Admin page in BI Publisher and add EBS as a new data source, or perhaps to use the section of the integration of the Admin page, as we would with discoverer or workspace of Hyperion and Shared Services. But I know that's not as simple as that.
Can you help clarify?
Thank you!"Ideally, I like just go to the Admin page in BI Publisher and add EBS as a new data source, or perhaps to use the section of the integration of the Admin page, as we would with discoverer or workspace of Hyperion and Shared Services. '" But I know that's not as simple as that. »
I don't know why you don't think it's as simple as that, but it is. Add a new JDBC data source, assign it to BEEP roles, create templates of data/queries against this data source and you're ready to go.
To use the multi-org views, you need to set the org_id in forward initiation of the report.
What version of BEEP are you using? We have the last BEEP 11 g, we use eBS (R12) as the security model, Teradata is our main source of data, but almost all the reports uses the security context for the multi-org eBS to limit the data of Teradata, based on the security profile of the user as defined in eBS.
I hope this helps.
Thank you
Sunder -
Using the data binding on each button in a ToggleButtonBar
Can someone tell me if it is possible to use the data binding on the individual buttons in a ToggleButtonBar and, if so, how?
I want to be able to use the data binding for each individual button in the ToggleButtonBar 'enabled' property, but is not possible using MXML because the ToggleButtonBar takes a data provider to display labels for each button and, obviously, I can't set the "enabled" on the values of dataprovider property because they are not objects Button. For example, I'm not allowed to do something like this:
< mx:ToggleButtonBar id = "tbb".
toggleOnClick = 'true '.
itemClick = "clickHandler (event)."
creationComplete = "tbb.selectedIndex = 1" >
< mx:Button label = "A" active = "{...}" / >
< mx:Button label = "B" enabled = "{...}" / >
< mx:Button label = "C" enabled = "{...}" / >
< / mx:ToggleButtonBar >Ah! The ToggleButtonBar. Liaison. MXML. mysterious. Not obvious. But yes, we CAN do...
First, you will need to get the buttons to toggle. Did you know that they are actually ButtonBarButtons? Once you get an instance of each of them, you can do the binding in MXML.Each button LINK below the ViewStack is bound to a ToggleBarButton.
When you click a related button below, the LINK button above it will have its enabled enabled/disabled property. Then a link fires, setting the enabled property of the related ToggleBarButton.This example requires that you know advance how toggle buttons and buttons, you have, so it will not evolve well. Whenever you add a button, you will need to enter hard in the 'getButtons' function, which implements the ButtonBarButton instances. But if you have a known quantity of buttons, no problem.
-
FaceTime uses the data when it is off wifi?
Yep, it will use the cell data. About 3 MB of / minute.
-
ListView xml by using the data source does not?
Hello
When I use the data for loading XML source, listview displays data only if there is at least 2 element in the XML file.
import bb.cascades 1.0 import bb.data 1.0 NavigationPane { id: nav Page { id: emp titleBar: TitleBar { visibility: ChromeVisibility.Visible } onCreationCompleted: { dataSource1.load(); //load the xml when page is created } actions: [ ActionItem { title: qsTr("Create List") ActionBar.placement: ActionBarPlacement.OnBar onTriggered: { dialog.open(); } } ] Container { topPadding: 30.0 leftPadding: 20.0 rightPadding: 20.0 ListView { id:list1 dataModel:dataModel listItemComponents: [ ListItemComponent { StandardListItem { title: { qsTr(ListItemData.name) } } } ] } } } //page attachedObjects: [ GroupDataModel { id:dataModel }, DataSource { id: dataSource1 source: "models/employeelist.xml" query: "/root/employee" type: DataSourceType.Xml onDataLoaded: { dataModel.clear(); dataModel.insertList(data); } }, Dialog { id: dialog Container { background: Color.Gray layout: StackLayout { } verticalAlignment: VerticalAlignment.Center horizontalAlignment: HorizontalAlignment.Center preferredWidth: 700.0 leftPadding: 20.0 rightPadding: 20.0 topPadding: 20.0 bottomPadding: 20.0 Container { background: Color.White horizontalAlignment: HorizontalAlignment.Center preferredWidth: 700.0 preferredHeight: 50.0 Label { text: "Add Employee List" textStyle.base: SystemDefaults.TextStyles.TitleText textStyle.color: Color.DarkBlue horizontalAlignment: HorizontalAlignment.Center textStyle.fontSizeValue: 4.0 } } Container { topPadding: 30.0 layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Label { text: "Employee Name " } TextField { id:nametxt } } Container { topPadding: 30.0 layout: StackLayout { orientation: LayoutOrientation.LeftToRight } Button { text: "OK" onClicked: { var name=nametxt.text; if(nametxt.text=="") { _model.toastinQml("Please enter a name"); } else { _model.writeEmployeeName(name); //writing name to the employeelist.xml nametxt.text=""; dialog.close(); dataSource1.load(); //loading the xml } } preferredWidth: 300.0 } Button { text: "Cancel" onClicked: { dialog.close(); } preferredWidth: 300.0 } } } } ] }//navigation
When I add a name to the first time to the XML, the list shows nothing. Then, when I add a new name, it displays the list.
Why is it so? Is there a any mistake I made?
Help, please!
Thanks in advance
Diakite
It seems that there is a problem reported on the DIT that was refitted with internal BlackBerry MKS defect tracking system. Until this issue is reviewed by our internal teams, please use the solution suggested by the Rapporteur for the question by introducing an "if" statement before inserting data to the DataModel:
if (data.name) { empDataModel.insert(data); } else { empDataModel.insertList(data); }
-
Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?
Hi carlottav39691716,
Please see the following links:
Error 43 - I can't download any adobe apps CC or creative cloud Manager
Creative cloud, re-install-Dungeon error 43
Error in downloading, installing or updating Adobe Creative Cloud applications
Let us know if that helps.
Kind regards
Sandrine Bani
-
JDeveloper 12.1.2 has a problem with links when you use the data bean control
Build JDEVADF_12.1.2.0.0_GENERIC_130608.2330.6668
The problem that I am facing is:
I used the data bean control to create our user interface. After that I dragged my jsff page data control, links have been created.
I opened the XML pagedef to my page. On the Bindings tab and executable, I added a few links more by clicking on the Green plus sign. After I saved my changes, I noticed that some other links have been replaced by a link to the different executable files.
This behavior occurs almost everytime I have edit links. Does anyone else see this problem?
It looks like another instance of the bug described in https://java.net/jira/browse/ADFEMG-156
This bug is fixed in 12.1.3. If you need the fix in 12.1.2 you should open a SR with support.oracle.com and ask a backport.
Timo
-
calculate the day of the year using the date.
Hi all
Can calculate us the day of the year using the date form? Is this possible? Please help me thanks in advance
Like this
30/08/2009-30/08/2010 after calculation - 365
Sarah
Published by: SarahSarahSarah on August 30, 2009 12:49 AMSarah.
: ins1.noday must be a part of number!
Create a function in forms like this:
function get_nodays ( f_dtm_start in date, f_dtm_end in date ) return number is begin if f_dtm_start is null OR f_dtm_end is null then return ( null ); end if; return ( trunc ( f_dtm_start ) - trunc ( f_dtm_end ) ); exception when others then message ( sqlerrm || ' in function get_nodays occured.' ); return ( null ); end;
Call this function in the when-validate-point triggers on ins1. INSPERIOD and: ins1.end love
:ins1.noday := get_nodays ( :ins1.INSPERIOD, :ins1.end );
It is redundant to have the: noday as a cause of part of database
the value may by calculated every time using the values INSPERIOD and: end. -
Problem in the search using the Date column
Hello
I use the date in the search for field (jj-LUN-AA date selector) P1_END_DATE.
When I search the record he won't give the result.
I used the following in the where condition
trunc (e.END_DATE) = trunc (to_date (:P1_END_DATE))
Please notify.
Concerning
HarinderHarinder salvation,
Make sure that you use the same date format as your date picker.
Do not assume that they will be the same.
TO_DATE (: PXX_XXX, ' dd/mm/yyyy');Concerning
Michael
-
I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?
Hi jerrir58650452,
You can access your service pack pdf by using the following link: https://cloud.acrobat.com
Kind regards
Rahul
Maybe you are looking for
-
7 iPhone connection to car via BT
I received my iPhone 7 more yesterday morning, but have EXTREME difficulties with connecting Bluetooth to my Skoda SUV. MY OLD 6 more connected almost instantly when I got it two years ago. I checked the network of Bluetooth and Wi - Fi on the iPhone
-
Solenoid with labview interface
Hi, I currently have a solenoid valve (NVZ110) with 24 VDC, "+" and "-" terminals) and I: CFP-DIO-550 CFP-AO-200 CFP-AO-210 PSC-HAVE-112 My question what module should use to open and close the tap? Also, I couldn't find a tutorial on how to create a
-
I was wondering where the fix is for Ics battery problem? I'm on my fourth replacement and it is not the phone. Can someone give a guess on what help is coming?
-
Hey, I tried to set up the console cheats for oblivion, but it does not work I followed the steps on how to stop the windows media center Receiver service, but even after that I stopped it it won't let me put up the cheat console. no idea what I shou
-
Pavilion g6-1205sc: password administrator or power on password
Hello I have a hp pavilion 1205sc g6 and when I start my laptop I enter the password administrator or power on password and after that I tried 3 times he tells off System 59901233 Please help me Happy new year everyone! and sorry for my bad English