Using the local CD/DVD drive... or even an ISO each

Similar Questions

• Qosmio F30 - how to get started using the external CD/DVD drive?

  Hello Mr President

  I have a Qosmio F30. My CD/DVD drive does not work. I have the USB CD/DVD drive, but I think that F30 does not support external USB CD/DVD drive to boot to the top.

  Please help me. Now, how can I boot Windows XP CD?

  At first, I must say that I really wonder why you do not have something to trade integrated optical drive. Qosmio F30 is not that old laptop and is perhaps the warranty still valid. You should check with the partner of service authorized in your country.

  For start with external peripheral is not so easy because the external drive doesn't recognize started upward. Theoretically you should either external ODD visible to your Qosmio. For older laptop, it is possible if you start Notepad in pilot mode and load BACK to BACK. After doing this you have access to the external hard drive and can start the installation.

  You can do this with your Qosmio laptop?

• I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  I have tried to download/reinstall CS5 that my laptop current doesn't have a dvd drive, but even after downloading the files, it will not install

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.

  Re-installing Dell inspiron 19 has windows 7

  People,

  I have a Dell Inspiron 19. The Dell of Dell diagnostics disk utilities & drivers say all right. It is a Seagate 320 GB drive. I installed the drive on another computer and used sea tools to erase the disc.  Then I created a partition and marked as "bootable".

  When I try to use the Dell reinstallation DVD Windows 7 Home premium SP1 64-bit, it crashes when is about to display the windows logo.  A few pixels logo show and then it's there.  Any ideas?  I worked on it for several days.  Really a "stumper" for me and I did something like that for years!

  Original problem seems to be a massive viral infection (owner had no active antivirus software installation!) which led to the non-bootable computer.  After working on this for a while, I decided to just do again it.

  Miles

  Located in the beautiful valley of the Shenandoah in Virginia

  Hello

  Here's how to use the Dell Windows 7 disc according to Dell:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_362048&isLegacy=true

  If you have problems with it, try to Support Dell because it's their software:

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

  Or try the Dell Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  And these are some Vista Forums you are in.

  In Forum Windows 7 install:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  See you soon.

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• How to prohibit remote access vpn client to use the local DNS server

  Hello

  I'm on ASA5505 remote access vpn configuration.

  Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP.  How can I force the customer to use the DNS server configured on ASA?

  Thank you.

  Kind regards

  The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported.

  Here's the order reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793

  You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel.

• Cannot SSH in vmware player (can use the local IP address but not external IP)

  As above

  Cannot SSH in vmware player (can use the local IP address but not external IP)

  Am new to vmware, so if you need information to help me on what you'll need to tell me how to get

  See you soon

  Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host.  Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port.  Then, you will be able to access from outside local physical host network.  If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine.  If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.

  Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

• weakness / strength to use the local system for vSphere services account

  Beyond to create Active Directory accounts for the connection of your server vCenter to a SQL remote box, is there a better practical reason to create an AD account to run your services of vSphere?

  The default is to use the "Local System" account. Is there an inherent weakness by using the local system account for services such as vCenter, VUM or vConverter?

  Hi James. In the service using AD creds accounts can actually be very precarious - a little more info on:

  http://articles.TechRepublic.com.com/5100-10878_11-1053581.html (gets interesting about 3/4 of the page down)

  http://www.sans.org/reading_room/whitepapers/application/service-account-vulnerabilities_5

  Concerning

  Owen

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• connection to a local CD/DVD drive freezes

  Hello!

  I have seen this problem several times in the last days: trying to connect my local DVD drive via vSphere Client with a virtual machine, the CD/DVD button says 'connection... '. "but never actually finalizes the process. I think that yesterday I was able to solve this problem by turning off the virtual machine, remove the device configuration and adding a new. Now, even if I delete the device, the power on the virtual machine (i.e. the CD/DVD button is grayed out because there is no device), turning off the virtual computer and add a new drive, and then turn it on again, the reader is always displayed as "connecting...". »

  Is this a known issue? And how to get out of this situation?

  As this thread is always updated from time to time, I would like to answer my own question:

  The problem occurs, when there is more than one instance of vSphere Client running at the same time. I do it often, as I have more than one Server vCenter to manage. Even if all customers of vSphere are closed, check that no process failed or suspended "VpxClient.exe" are around. Kill, if necessary. Restart a single new vSphere Client, and remote media will be connected.

  From vSphere Client as an administrator is not necessary. The fact that it is running under a different user name is also probably the reason why that works.

• Cannot get new virtual machine to boot from the local CD/DVD

  Done a lot of research but have no solution. Connected to my esx Server 3.5 Vista with customer infrastructure 2.5, created a new machine and then it booted up and logged the cd/dvd drive of client (vista machine).

  If I try to use Passthrough, I get a VM error saying I need to enable the legacy mode. If I change the emulation drive (do not see an option of legacy mode, all), the machine does not take into account my drive and trying to perform a PXE boot.

  Any ideas how I can get this to work? He has in the past of this machine, but now I'm just bashing my head against the wall.

  I really found the "client" machine of work particular during the installation of an operating system.  What you might consider if you are in a position makes one. ISO and upload file to local storage or space on your LUN and connecting this way that will greatly increase the speed of installation.

  • Kyle

• Using the IDE & SATA hard drives on the same system

  My system: Vostro 400 desktop, Intel Core 2 Duo 2.3 GHz, Windows XP Home Edition.

  Situation: I use a SATA hard drive and the DVD drive is SATA. I want to add an IDE hard drive (from my old computer) to this system. I can't find any IDE cable or even an IDE port on the motherboard to add an IDE cable for a hard drive.

  Question: Is it possible to add an IDE hard drive to this computer and run hard IDE and SATA drives simultaneously?

  
  

• I have a Dell Inspiron 1525. The player/cd-DVD drive will not work. The help section it says it is (code 10). The drivers seem to be installed. Can you help me please? Operating system is Windows Vista Home Premium

  I tried the support centre and followed their advice, but no luck yet.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Can I use the local names of disk for files

  Hello

  I have 3 partitions on the disk of hard primary 465 GB where C is the system partition d & E are partitions of data I have a secondary hard drive online and think that let me use D & E as folder names, as these can appear as a Local disk icons, I have my data on will be my idea nearly worked

  I intend to use the description above if

  I can restore the data on the primary drive if it comes with empty data partitions

  I can try this experience

  As long as the names of folders does not contain the following characters, Yes, you can go ahead:

  : \ / * ? <> |

  As for names and icons, you can set the names of the files so readers define the folder icon to look like a hard disk partition. The following link will help you:

  http://Windows.Microsoft.com/en-us/Windows/folders-FAQ#1TC=Windows-7