Using the P2V "duplicate IP addresses.
Hi all
I managed to convert the physical server which is a Windows 2003 Server box running on a Compaq DL360 machine to a virtual machine using the Vcentre Converter standalone. Now my question is...
1. the physiqueet server is on a domain should I remove the domain and add it to the Working Group, then disable the physical NETWORK card? So I can use the same IP address of the physical server.
2. once I have removed the physical server in the domain and add the same IP on the new virtual server that I need to make changes to the DNS? is DNS be confused when a physical server is converted to a virtual server with the same host name?
I tried to pass the ip address after the closure of the old physical server however. The virtual server has complained that the ip address has been used by a hardware address of the physical server and then I got a message "address ip duplicate"
Any help would be greatly appreciated
Thank you very much
KeV
You can also do the P2V without removing the domain host, if you have a local account on it.
After P2V shut down the old server, log in to the virtual clone with your local account (domain account will not work because of the missing network config), set up the old network with IP address, reboot and everything is fine.
Domain ObjectID etc. will remain the same, the only thing that changes is the MAC, but it is not important for the domain.
Concerning
Tags: VMware
Similar Questions
-
Every day I receive a notice that someone on my computer using the same I.P. address
Title of the Moose: I. Address of P.
Every day I receive a notice that someone on my computer using the same I.P. address but yet I found nothing of canoe
Hello
(1) work on a domain network?
(2) how long have you been faced with this problem?
(3) what is you receive the exact error message?
Method 1: If it is a small network of computers on homegroup, contact the person with administrative rights system on your network.
Method 2: Make sure that the network card is configured according to the manufacturer's specifications and that the configuration is not incompatible with the other hardware configurations.
Method 3: Run Microsoft Security scanner (MSS) to any threat and try to correct
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: Infected files can be deleted from your computer; There is a chance of data loss.
Method 4: download and install all available Windows Update
Install Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updatesIf you are working on a domain network, then please post your query on the TechNet forums for more specialized help.
TechNet Forum
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
-
How to set up a new email account using the same e-mail address of my old computer?
How can I configure sup a new email account using the same e-mail address of my old computer?
Hi Melanie,
Are you referring to the Mail app or user login account?
If you are referring to the Mail application, you can consult the following link: Set up Mail and add contacts
If you are referring to the user login account, you can consult the following link: create a user account
It will be useful.
Keep us informed on the status of the issue.
-
Create database pending active using the RMAN Duplicate command
Hello guys,.
I created the database before using the RMAN Duplicate command, but here I am stuck.
Please help me to overcome this >
RMAN > run {}
2 > allocate channel prmy1 type disk;
3 > allocate channel prmy2 type disk;
4 > allocate channel prmy3 type disk;
5 > allocate channel prmy4 type disk;
6 > allocate auxiliary channel stby type disk;
7 > duplicate target database for the eve of the active database
8 > spfile
9 > parameter_value_convert "orcl", "orclstd".
10 > set db_unique_name = "orclstd".
11 > set db_file_name_convert = "/ orcl / ', ' / orclstd / '.
12 > set log_file_name_convert = "/ orcl / ', ' / orclstd / '.
"13 > set control_files="D:\app\employee3\oradata\ORCLSTD\control01.ctl ', 'D:\app\employee3\flash_recovery_area\ORCLSTD\control02.ctl '.
14 > set log_archive_max_processes = '5'
15 > set fal_client = "orclstd."
16 > set fal_server = "orcl".
17 > set diagnostic_dest =: \app\employee3'
18 > set db_recovery_file_dest = a: \app\employee3\flash_recovery_area'
19 > set standby_file_management = 'AUTO '.
"20 > set log_archive_config ='dg_config = (orcl, orclstd)"
21 > set log_archive_dest_2 = 'service = orcl ASYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd';
{22 >}
allocated channel: prmy1
channel prmy1: SID = 70 type device = DISK
allocated channel: prmy2
channel prmy2: SID = 135 type device = DISK
allocated channel: prmy3
channel prmy3: SID = 191 type device = DISK
allocated channel: prmy4
channel prmy4: SID = 7 type of device = DISK
allocated canal: stby
channel stby: SID = 129 type device = DISK
From 7 November 12 Db double
content of Script memory:
{
backup that copy reuse
TargetFile "E:\app\RAJKUMAR\product\11.2.0\dbhome_1\DATABASE\PWDorcl.ORA" auxiliary format
"D:\app\employee3\product\11gr2\DATABASE\PWDorclstd.ORA" targetfile
' E:\APP\RAJKUMAR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEORCL. ORA' auxiliary format
' D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD. ORA';
clone of SQL ' alter system set spfile = "D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD." ORA "«;»
}
execution of Script memory
From backup 7 November 12
Backup finished in 7 November 12
SQL statement: alter system set spfile = "D:\APP\EMPLOYEE3\PRODUCT\11GR2\DATABASE\SPFILEORCLSTD. ORA "
content of Script memory:
{
clone of SQL 'alter system set audit_file_dest =
"E:\app\RAJKUMAR\admin\orclstd\adump" comment =
' ' scope = spfile;
clone of SQL 'alter system set dispatchers =
''(Protocol=TCP) (SERVICE = orclstdXDB) "comment =
' ' scope = spfile;
clone of SQL 'alter system set db_unique_name =
"Orclstd" comment =
' ' scope = spfile;
clone of SQL 'alter system set db_file_name_convert =
"/orcl/", "/orclstd/" comment is
' ' scope = spfile;
clone of SQL 'alter system set log_file_name_convert =
"/orcl/", "/orclstd/" comment is
' ' scope = spfile;
clone of SQL 'alter system set control_files =
"D:\app\employee3\oradata\ORCLSTD\control01.ctl", "D:\app\employee3\flash_recovery_area\ORCLSTD\control02.ctl" comment =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_max_processes =
5 comment =
' ' scope = spfile;
clone of SQL 'alter system set fal_client =
"Orclstd" comment =
' ' scope = spfile;
clone of SQL 'alter system set fal_server =
"Orcl" comment =
' ' scope = spfile;
clone of SQL 'alter system set diagnostic_dest =
"D:\app\employee3" comment =
' ' scope = spfile;
clone of SQL 'alter system set db_recovery_file_dest =
"D:\app\employee3\flash_recovery_area" comment =
' ' scope = spfile;
clone of SQL 'alter system set standby_file_management =
Comment by "AUTO" =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_config =
Comment by "dg_config" (orcl, orclstd) =. =
' ' scope = spfile;
clone of SQL 'alter system set log_archive_dest_2 =
"service = orcl ASYNC = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd valid_for" comment =
' ' scope = spfile;
clone to stop immediately;
startup nomount clone;
}
execution of Script memory
SQL statement: alter system set audit_file_dest = comment "E:\app\RAJKUMAR\admin\orclstd\adump" = "' scope = spfile
SQL statement: alter system set dispatchers = ''(PROTOCOL=TCP) (SERVICE = orclstdXDB) "comment ="' scope = spfile
SQL statement: alter system set db_unique_name = comment "orclstd" = "' scope = spfile
SQL statement: alter system set db_file_name_convert = "/orcl/", "/orclstd/" comment = "' scope = spfile
SQL statement: alter system set log_file_name_convert = "/orcl/", "/orclstd/" comment = "' scope = spfile
SQL statement: alter system set control_files = "D:\app\employee3\oradata\ORCLSTD\control01.ctl", "D:\app\employee3\flash_recovery_area\ORCLSTD\control
02.CTL "comment ="' scope = spfile
SQL statement: alter system set log_archive_max_processes = 5 = comment "' scope = spfile
SQL statement: alter system set fal_client = comment "orclstd" = "' scope = spfile
SQL statement: alter system set fal_server = comment "orcl" = "' scope = spfile
SQL statement: alter system set diagnostic_dest = comment "D:\app\employee3" = "' scope = spfile
SQL statement: alter system set db_recovery_file_dest = comment "D:\app\employee3\flash_recovery_area" = "' scope = spfile
SQL statement: alter system set standby_file_management = comment "AUTO" = "' scope = spfile
SQL statement: alter system set log_archive_config = "dg_config = (orcl, orclstd)" comment = "' scope = spfile
SQL statement: alter system set log_archive_dest_2 = "service = orcl ASYNC = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = orclstd valid_for" comment = "'s
face = spfile
Instance Oracle to close
connected to the auxiliary database (not started)
Oracle instance started
Total System Global Area 1071333376 bytes
Bytes of size 1375792 fixed
528482768 variable size bytes
Buffers data 536870912 bytes
Redo buffers 4603904 bytes
allocated canal: stby
channel stby: SID = 63 type device = DISK
content of Script memory:
{
backup current controlfile to standby auxiliary copy format ' D:\APP\EMPLOYEE3\ORADATA\ORCLSTD\CONTROL01. CTL';
Restore clone controlfile to ' D:\APP\EMPLOYEE3\FLASH_RECOVERY_AREA\ORCLSTD\CONTROL02. CTL' of
' D:\APP\EMPLOYEE3\ORADATA\ORCLSTD\CONTROL01. CTL';
}
execution of Script memory
From backup 7 November 12
channel prmy1: from data file copy
copy of the control file ensures
name=E:\APP\RAJKUMAR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFORCL output file. ORA tag = RECID = 1 STAMP = 798743550 TAG20121107T171229
channel prmy1: datafile copy complete, duration: 00:00:03
Backup finished in 7 November 12
From restoration to November 7, 12
channel stby: copy of copy of control files
Restoration finished November 7, 12
content of Script memory:
{
SQL clone 'alter database sleep mounting database';
}
execution of Script memory
SQL statement: alter database mount rescue
output channel: prmy1
output channel: prmy2
output channel: prmy3
output channel: prmy4
exit canal: stby
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the command duplicate Db at 07/11/2012 17:12:40
RMAN-05501: abandonment of duplicate target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\MIGRATION_DATA01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_INDX01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_DATA01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\USERS01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\UNDOTBS01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\SYSAUX01 auxiliary file name. DBF conflict with a file used by the target database
RMAN-05001: E:\APP\RAJKUMAR\ORADATA\ORCL\SYSTEM01 auxiliary file name. DBF conflict with a file used by the target database
RMAN >
Thank you
Reverchonuser9192565 wrote:
11> set db_file_name_convert='/orcl/','/orclstd/' 12> set log_file_name_convert='/orcl/','/orclstd/'
RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\MIGRATION_DATA01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_INDX01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\DEMO_DATA01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\USERS01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\UNDOTBS01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\SYSAUX01.DBF conflicts with a file used by the target database RMAN-05001: auxiliary file name E:\APP\RAJKUMAR\ORADATA\ORCL\SYSTEM01.DBF conflicts with a file used by the target database
The strings that you entered in your file name conversion settings does not match where actually your data files. If the string does not match the names of files, there is no names of files to convert. Because you're on windows, how about something like this?
set db_file_name_convert='\ORCL\','\ORCLSTD\' set log_file_name_convert='\ORCL\','\ORCLSTD\'
Hope that helps...
Patrik
-
my email address was on a domain that has been taken over by another person / company.
As a result, my email does not work and I can't receive emails about this address any longer. All emails do not reach the cross. How can I change my email address on my account in Mozilla?
Should I create a new account to Mozilla, and if so I lose all the data on my existing account?Specifically, "representing Mozilla?
As a general rule, your email address is used as your username for most, if not all of the subdomains of the Mozilla, so you'll need to create a new account for each subdomain that you are registered with who uses this old email address.
Now, if you are referring to an account of Firefox used for the synchronization service, untie all your devices that use Sync and create a new account in Firefox. Then "link" all of your devices to this new account, Firefox, using synchronization of the configuration on each device. You should not lose your data because when you reconnect to the synchronization using the new Firefox account, your data will be synchronized your different devices on the server synchronization across again.
-
Is it possible for 2 + Firefox Sync accounts use the same e-mail address?
I have two Windows accounts, each with its own different Firefox profiles, (with 'match' accounts and profiles on other devices on my LAN) and therefore need to implement synchronization for each. Ideally, I would use the email the same for both accounts Sync - naturally with different passwords. Is this possible?
No, the email address is the "username" on behalf of synchronization, you need a different email address for each synchronization account that you are configuring.
-
How to use the shared variables to address several Watlow controllers on the same COM port
Hello
I am using LabVIEW 2010 to control 4 Watlow temperature controllers on a port com 3 are model 96 and 1 is a zone EZ controller. The controller has a unique modbus address and I'm trying to read from and write in the individual records (for example, setpoint closed-loop) variable shared help. I would return the data during playback (even if the data is displayed as invalid), but I am unable to change the value in the registry in writing. How can I be sure that's the Modbus server send commands to the correct controller?
Chuck
Hi Chuck,
Sorry for the delay in response, I was away last week. You can create as many servers for Modbus on one COM port that you would like, the only problem you'd see is if you tried to call the port from different locations at the same time. With respect to the documentation to cross, I'd start with the tutorial below for a comprehensive manual of Modbus. There are also quite a few listed under Datalogging and supervisory control Module help topics that may be useful if you want to solve specific issues.
Kind regards
Peter W.
-
CC for teams using the only e-mail address
We have 5 licenses for CC, but all users share the same email address and the console will not invite more than one user to this eamil address... How to work around this problem?
Hi Jimely_Bob_78,
Each Adobe ID can be used to activate only 2 times. Please change the email address to assign you the seat.
You can go for Creative Enterprise Cloud if you don't have different emails because it is based on the serial number & can be installed by Creative Cloud conditioner.
Please go through this:
http://forums.Adobe.com/message/5814304
Hope this helps you.
Kind regards
Baudier
-
Updated yesterday, I tried to pull the first site in my combo and it wouldn't go. I tried to hit enter, and it wouldn't go. Finally press the address button reach, and he went. Very annoying.
You have the add-on installed AVG safe browsing?
If so, disable it until AVG to fix it. -
Error: tell someone else used the same IP address on Windows Vista
Original title: same address
I got a message this morning saying someone was using the same service provider address Internet as I am... i said to contact windows
Hi Brenda,
(1) what is you receive the exact error message?
(2) when exactly you receive this error message?
(3) remember you to make changes prior to this problem?
Run the fixit available in the article below to reset the IP (Internet Protocol) address
How to reset the Protocol Internet (TCP/IP)
-
Problems with signature while using the Application Builder
So, I just went to create my application with applicationbuilder3.0 and I got this error. Anyone see this before? I went through the creation of p12s and files certificates and provisions three times now and it still does not work. I use the same e-mail address for all - so I have no idea how it would not match. Thanks in advance for any help!
There is something wrong with your provisioning profile. Remove all the p12 and provisioning of the files that you have done as an attempt to get this working and then follow the steps in our guide publishing, starting on page 17, exactly: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.
Neil
-
virtual machine on the host computer has been detected to have a duplicate ip address
I have seen several threads about this, but they are all either point to one) all resources used or b) firewall issues, and since I have neither, I wanted to see if anyone knows the answer...
I have 6 servers identical all running the same exact version of ESX Server 3i 3.5.0 build-153875 and 5 of them work perfectly, but the 6th gives the same error as the original poster. It obviously isn't a problem of firewall from the 5 / 6 work very well and I connect to all (and about 15 other servers vmware ESX Server) of my workstation. The server with the question has no installed VMs (don't stay connected long enough to build a) and he passesd all hardware diagnostics I run on it. It has an IP address static, put in place like all other servers and ESX I reinstalled several times.
Looking at the logs, I see this message: virtual machine on the host has been detected with a duplicate IP address
How is this possible, is that there is still no VMs on that? Anyone know how to fix this?
How is this possible, is that there is still no VMs on that? Anyone know how to fix this?
Not sure why she complains VM, as you didn't tell any virtual machine set up, but define you as static. Are you sure that you do not use an IP address already in use?
Disable the ESX host, can you ping the IP? Something is using this IP address somewhere, so the message can be vague, but something is causing an IP address conflict.
-
When I send an email to a "list" in my address book I want to warn all the email addresses of the recipients to be visible by all byhaving be the entire list > bcc - how can I do this with Thunderbird?
Place the list in an address field, click the TO and replace it with BCC.
If you do not Contact sidebar enabled in the entry window press F9 to turn it on. Select contacts or to the mail list, then use the button Add to the BCC.
-
Could not find ' subject: accidents using the address bar
My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.Hello type about: crashes without an empty space (on: crashes)
Thank you
-
can connect by using the ip address, but not by using web address settings?
Try to connect to the internet using access point mobile Windows 7 Firefox browser.
I can access a Web site by using the ip address using however nothing www.msn.com or whatever it is.
In the connection to the internet in Network Options window that I have no idea of what to put in there, I have tried auto that nothing works(hit the uppercase text - c)
There servers DNS Setup correctly?
Maybe you are looking for
-
HP Printer Wizard does not open. setting preferences, see what's printing, etc. will open. How can I correct and allow the printer wizard window to open?
-
MT MONITOR (TV) SECONDARY DISPLAYS UNSUPPORTED VIDEO SIGNAL
I used a VGA splitter to connect my Toshiba Regza LCD TV and my screen for multiple monitors. I have the NVIDEA planned program to Clone. If I start the computer, the two appear when windows XP starts, but once the icons on my desktop, the TV shows u
-
What download software to get my crystal eye webcam back operational computer
the file has been removed .accidentlly and now when I take a picture, there is no image of me just my background the wall what software do I need to download (free) and on what site I was at acer and tried to download the image software but it does n
-
Impossible to get 64-bit Vista to work with the software
Should go back to XP or trust windows 7?
-
problem with the mouse and keyboard and windows update does not work
Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I