Impossible to get 64-bit Vista to work with the software

Similar Questions

• the dell photo printer 720 32-bit vista driver work with xp?

  the dell photo printer 720 32-bit vista driver work with xp?

  No, a Vista driver will not work with XP.

  Check the Dell support site to see if they have XP drivers for your printer.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• try to install Medal of Honor Airborne on 32-bit vista, and problems with the windows firewall starts do not.

  OK, im losing my mind.

  I bought a copy of airborne for my 32 bit vista system and found initially that I had to do a few tricks to install and play it like UN-installing ageia phys-x, it was simple enough. Well I have had since stopped playing it and would try to uninstall without result. I tried to fix it and using "C-cleaner.

  I went down some of the files, but I think that my registry is a little buggy so I tried blocking it with c cleaner, he sure found several errors and fixesd them.

  Well, I'm trying now to re - install MOHA and when I put the disc and click autorun the pre-start games window appears with the usual options, play, upgrade, site Web etc... I hit play, it does nothing. I tried to uninstall it from the disk and to halfway through she said "MOHA has not stopped the Installation Wizard prematurely try again later". I can't repair or uninstall or install. I read somewhere that it is a firewall with windows problem and if I run my firewall victory "which I have never on", this should work if the software is added to the 'green' list on the firewall.

  now I find that I can not get my firewall to start. I researched and found a few forums where people explained to the services command prompt and tried to 'start' several 'order' in there and firewall programs will not start giving me this error-windows cannot start service windows firewall. and the code of error-6801.

  I am a novice to tooling autour under the 'software' hood of PCs. I know a bit about the material and that's it. anyone has any ideas for me? otherwise I'm looking to another disorder vista install, I had a moment difficult, installation of the 1st hour and im not not looking forward to try it again...

  Thanks in advance, has soon - a fool lose his mind...

  Hi rocknerd,.

  You can try to download the Windows Installer Cleanup utility and try to remove the game, and then reinstall it.

  You can read the following article to download the Windows Installer Cleanup utility:

  http://support.Microsoft.com/kb/290301

  1. click on Start , then select all programs

  2. in all programs , click Windows Installer Cleanup; the Windows Installer Clean Up Utility window appears, listing the software currently installed on your computer.

  3. Select the game in the list, then click on Remove. If you have multiple files, delete all the.

  After you run the Windows Installer Cleanup utility try to re install the game and check if it works on your computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to get H/P 7600printer to work with windows 7, 64 bit

  Why won't my printer which is a H/P/7600 works with my windows 7 64 bit

  Have you tried to install in compatibility mode?

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > chose the operating system

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• My true 32-bit Vista key work with 64-bit?

  I just ordered a SL500 (not yet received) with Windows Vista Ultimate. I wonder if the real key with what he will come will work with Windows Vista Ultimate x 64 as well? Vista Ultimate that comes with the laptop facilities include both x 86 x 64?

  Hi Bear17, welcome to the Lenovo user community!

  Yes, the x 86 Vista key will work with x 64.

  Not the laptop does not come with facilities both x 86 and x 64, so you'll need x 64 media if you decide to spend.

• How can I get voice and data to work with the ASA 5505?

  Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

  Here is my current config:

  hostname TESTvpn
  activate the password xxxxx

  passwd xxxxx

  username admin password xxxxx privilege 15

  name Corp_LAN 10.0.0.0
  name 192.168.64.0 Corp_Voice
  name 172.31.155.0 TESTvpn

  object-group network SunVoyager
  host of the object-Network 64.70.8.160
  host of the object-Network 64.70.8.242

  the Corp_Networks object-group network
  network-object Corp_LAN 255.0.0.0
  object-network Corp_Voice 255.255.255.0

  interface vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  No tap

  interface vlan1
  nameif inside
  security-level 100
  IP 172.31.155.1 255.255.255.0
  No tap

  interface vlan3
  nameif Corp_Voice
  security-level 100
  IP 172.30.155.1 255.255.255.0
  No tap

  output
  interface Ethernet0/0
  switchport access vlan 2
  No tap

  interface Ethernet0/7
  switchport access vlan 3
  No tap

  output

  dhcpd allow inside
  dhcpd address 172.31.155.10 - 172.31.155.30 inside
  dhcpd dns 10.10.10.7 10.10.10.44 interface inside
  dhcpd sun.ins area inside interface
  dhcpd allow inside

  enable Corp_Voice dhcpd
  dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
  dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
  dhcpd interface of sun.ins of the Corp_Voice domain
  enable Corp_Voice dhcpd
  dhcpd option 150 ip 192.168.64.4 192.168.64.3

  Enable logging
  exploitation forest buffer-size 10000
  monitor debug logging
  logging buffered information
  asdm of logging of information

  outside_access_in list extended access allow all unreachable icmp
  outside_access_in list extended access permit icmp any any echo response
  outside_access_in list extended access permit icmp any one time exceed
  access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
  inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
  Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
  Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

  VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
  extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Access-group Corp_Voice_access_in in the Corp_Voice interface

  Global 1 interface (outside)
  NAT (inside) 0-list of access VPN
  NAT (inside) 1 172.31.155.0 255.255.255.0

  Enable http server
  http 172.31.155.0 255.255.255.0 inside
  http 172.30.155.0 255.255.255.0 Corp_Voice
  http 192.168.64.0 255.255.255.0 Corp_Voice
  http 10.0.0.0 255.0.0.0 inside
  http 65.170.136.64 255.255.255.224 outside
  SSH 10.0.0.0 255.0.0.0 inside
  SSH 172.31.155.0 255.255.255.0 inside
  SSH 65.170.136.64 255.255.255.224 outside
  SSH timeout 20

  management-access inside

  dhcpd outside auto_config

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
  crypto map outside_map 1 is the VPN address
  peer set card crypto outside_map 1 66.170.136.65
  card crypto outside_map 1 the value transform-set VPN
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800

  tunnel-group 66.170.136.65 type ipsec-l2l
  IPSec-attributes tunnel-group 66.170.136.65
  pre-shared-key xxxxx

  output
  int eth 0/1
  close
  No tap
  int eth 0/2
  close
  No tap
  int eth 0/3
  close
  No tap
  int eth 0/4
  close
  No tap
  int eth 0/5
  close
  No tap
  int eth 0/6
  close
  No tap
  int eth 0/7
  close
  No tap

  Peter,

  Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

  Please do:

  no nat (Corp_Voice) 0-list of access vpn

  No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
  IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

  extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

  NAT (Corp_Voice) 0-list of access VPN

  In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

  So if you want to separate you, you will need 3 access lists:

  list of access data-vpn ip TESTvpn 255.255.255.0 allow one

  voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

  access-list all - vpn ip TESTvpn 255.255.255.0 allow one

  access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

  NAT (inside) 0-list of access vpn data

  NAT (Corp_Voice) - access list 0 voice-vpn

  outside_map 1 match address all vpn crypto card

  Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

  HTH

  Herbert

• Audition refusing to leave my blue Nessie microphone to work with the software. Help!

  Whenever I try to use my blue microphone Nessie and I click on the record button, you will see this error message:

  «The sampling rate of the output devices and audio don't match.» Audio cannot be recorded until this problem is corrected.

  Use the appropriate operating system or control panel of audio device to set the frequency of sampling of input and output devices to use the same settings. »

  That's the problem, I DO NOT KNOW WHICH SAMPLE RATE of USE for MY MIC ON HEARING! Heck, even the correct settings I have no idea what to use!

  I don't have time to experiment with the settings, if someone of you have any suggestions? In the meantime, I'll have to use Audacity to use my microphone.

  Thank you.

  My OS: Windows 8.1

  Microphone: Blue Nessie Desktop USB Mic

  Well, so much the manufacturers specifications and the manual for the State mic mic sample rate is 48 k. So the hearing and the sound Windows settings must be set to one to work.

• Best way to allow the new 64 bit Vista Home Premiun PC to work with the software and virtual private networks more elders with unsigned drivers?

  I just bought a new HP PC with Intel E5300 without experiencing compatibility issues with several current VPN as well as blocking drivers not signed properly.  I heard of the Virtual PC as well as the ability to install Vista 32.  What is the simplest, lowest cost way to make this existing work of PC with VPN and unsigned drivers as soon as POSSIBLE with performance at least equivalent to a Pentium 4 2 GHz with 2 GB of RAM?

  http://support.Microsoft.com/default.aspx/KB/946765

  Read the above info on drivers.

  The driver signing

  Unsigned drivers can be used with 32-bit versions of Windows Vista.

  64 bit versions of Windows Vista require that all device drivers be digitally signed by the developer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon. Mick Murphy - Microsoft partner

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Impossible to get together-QVWComputer - PersistentClient to work with 8.0 PS Module

  My code has worked on 7.2.1 but I can't make it work since upgrade to 8.0. I'm just trying to assign a user to a VDI, Set-QVWComputer is the only command that I'm having a problem with.

  The error I get is "the specified filter was invalid."

  Example of order:

  Game-QVWComputer-gites "Domain\UserName" (Get-QVWFarm) - PersistentClient-Identity 'VDIComputerName '.

  This "specified filter was not valid" resolved in 32 of the PowerShell 8.0 module version.

  The version that you are using must be greater than 8.0.306.32 - please ensure you are running a current version of the module.

• Impossible to get a Multicam sequence of work since the update

  I have updates for Premiere Pro. Last mo nth I started a project with three different angles and was able to create and edit successfully the project without problem. Shot different project, same three cameras, same files and I can't do the sequence multicam sync anything. I tried all three views, any combination of the three, export to different type of files, nothing works.

  What gives?

  Any help would be appreciated. As with anyone else, I know, I have a deadline for this project.

  Thank you

  Running Windows 7 64-bit OS

  16 GB of ram

  I guess I'm not as crazy as I thought! Seems that I created the problem on my own. A sequence has two tracks, one I couldn't see not in view, and it was not sync'd up with each other. Once, I removed and made the multicam went right away and am at Midway through a ceremony of marriage to edition!

• Impossible to get free 3D glasses to work on the Qosmio F750

  Hello

  I tried to make it work on my Qosmio F750 without success. whenever I try to not calibrate the 3D using the face recognition, theres no poping window until the recognition of face, am I missing any driver?

  Hello

  Can you please post exact model laptop number?

  Usually the X-Tune: software must be pre-installed on a Qosmio F750.
  This software allows you to calibrate the 3D effect.
  http://APS2.toshiba-tro.de/KB0/TSB1C038D0000R01.htm

  Please be sure that Super-d Driver IC (V1.0.1613.809 or later) has been installed
  All these software and drivers should be available on the Toshiba driver page.

• How can I get my Firefox persona to work with the new version of Firefox?

  It worked fine, then my computer automatically updated Firefox and my persona background disappeared. It is listed as active on the backgrounds of modules in the modules Manager. I Foxkeh tail stir. I went and reinstalled but it still does not come. I went to the personas firefox page and tried to install a different character. NONE of them work now. How can I get my background persona back?

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

  When you're in private browsing mode then the character is disabled and you get the default theme and a purple icon of PB in the menu button on the side of the right end of the menu bar (bar of tabs on Linux) or Firefox and "(navigation privée)" added to the title bar. "

• BlackBerry 8100 pearl improved Smartphones, now the Bluetooth does not work with the software taMusik

  Hello, I upgraded my BB 8100 to 4.5. Now, I can't listen to my music through my Bluetooth. I can still do well with her calls. My Bluetooth is a cardo S-800 & music software is tamusik (my carrier is Rogers) if anyone has any suggestions I'd appreciate really them. Thank you!

  Well, it sucks! I was able to use it before the upgrade & afterwords lost! Well.