Using variables in the queries and dashboards

Similar Questions

• What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

  What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

  If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

• How to create a file name variable with the County and the date?

  Objective: Create a file name variable with the County and the date

  Error: get a lot of error. Do you know how to change my code?

  Question: how to create a file name variable with the County and the date?

  Mini code:

  std::string * rawfilepath;
  std::string * rawfilename;

  rawfilepath = "./shared/documents/";
  RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
  QFile file (rawfilename);
  If (file.exists ()) {}
  rawfilenamecount ++;
  RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
  }

  Thank you for your attention,

  Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.

  Solution is below.

  While (access (rawfilename, F_OK)! = - 1) {}
  rawfilenamecount ++;
  sprintf (format, RawFileName, rawfilenamecount);
  fprintf (stderr, "file exists");
  }

  Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
  fprintf (rawlog, "System Time (ms)" "");

• When I used to press the fill and sign that I'd get a drop down add initials, place check, create a signature now when I click on fill and sign all the I can do is to fill in information and create a signature digital-how can I pick up my old options? Tha

  When I used to press the fill and sign that I'd get a drop down add initials, place check, create a signature now when I click on fill and sign all the I can do is to fill in information and create a signature digital-how can I pick up my old options? Thank you

  It seems that you have empty fields of Digital Signature in the form.  Acrobat Reader DC complete and sign will add a signature of annotation with a PDF file that has Acrobat form fields or fields of Digital Signature in it.  Test it by opening a PDF file that has no form fields or fields of Digital Signature in it and who is not protected by security permissions.

• Cold Fusion Developer Edition can be used to develop the product and deliver to the customer

  Cold Fusion Developer Edition can be used to develop the product and deliver to the customer

  The limit of two IP resists don't not to, the EULA for ColdFusion legally using Developer Edition keeps you in any production environment.  Use it for development is very good, however.

  -Carl V.

• Using instructions in the queries box, where and how?

  
  I'm writing a query that returns the address fields based on a field type in the address table. There is a hierarchy to the return order, CO 'first, then am', then had '. I had been using left outer joins potentially draw three sets of fields in the database (there is ALWAYS a type D, but not necessarily an M or a CO M) then using if instructions in the program to write the correct address. However, my supervisor wants me to use case statements is to replicate a set of address within the query fields. I am at a total loss. I used the instructions box before, but not on something like that.
  
  Here is the code that I HAD been using:
  
  .
  .
  .
  AD. ADDRESS1,
  AD. ADDRESS2,
  AD. CITY,
  AD. STATE,
  AD. ZIP,
  AD. NUMBERS1,
  MAD. MAILING_ADDRESS1 AS ADDRESS1,
  MAD. ADDRESS2 HAVE MAILING_ADDRESS2,
  MAD. ACE OF THE CITY MAILING_CITY,
  MAD. MAILING_STATE OF THE STATE,
  MAD. ZIP AS MAILING_ZIP,
  MAD. NUMBERS1 AS MAILING_PHONE1,
  CAD. ADDRESS1 HAVE ADDRESS1,
  CAD. ADDRESS2 AS ADDRESS2,
  CAD. TOWN TO TOWN,
  CAD. STATE OF THE STATE,
  CAD. ZIP AS ZIP,
  CAD. NUMBERS1 AS NUMBERS1,
  .
  .
  .
  JOIN EXTERNAL ADDRESS AD LEFT ((M.CONTRACT_NBR = AD. ADDNO)
  AND (AD. ADDTYPE = A ')
  AND (AD. WHOTYPE = THE OF ')
  AND (V_RUNDATE BETWEEN AD. YMDEFF AND AD. YMDEND)
  AND (AD. SUB = ' '))
  LEFT OUTER JOIN ADDRESS MAD ON ((M.CONTRACT_NBR = MAD. ADDNO)
  AND (MAD.) ADDTYPE = AM')
  AND (MAD.) WHOTYPE = THE OF ')
  AND (V_RUNDATE BETWEEN MAD. YMDEFF AND MAD. YMDEND)
  AND (MAD.) SUB = ' '))
  JOIN EXTERNAL ADDRESS CAD LEFT ((M.CONTRACT_NBR = CAD. ADDNO)
  AND (IE. ADDTYPE = AM CO')
  AND (IE. WHOTYPE = THE OF ')
  AND (V_RUNDATE CAD. YMDEFF AND CAD. YMDEND)
  AND (IE. SUB = ' '))
  .
  .
  .
  
  I'm confused about time how Word instruction box and where to use them, either in the list of selection, or where clause.
  
  

  NVL seems more appropriate then the case here, you check for NULL values.

  I'm assuming you prefer CAD > MAD > AD (if not, then you should be able to edit appropriately).

  NVL(CAD.ADDRESS1, NVL(MAD.ADDRESS1, AD.ADDRESS1)) ADDRESS1,
  NVL(CAD.ADDRESS2, NVL(MAD.ADDRESS2, AD.ADDRESS2)) ADDRESS2,
  NVL(CAD.CITY, NVL(MAD.CITY, AD.CITY)) CITY,
  NVL(CAD.STATE, NVL(MAD.STATE, AD.STATE)) STATE,
  NVL(CAD.ZIP, NVL(MAD.ZIP, AD.ZIP)) ZIP,
  NVL(CAD.PHONE1, NVL(MAD.PHONE1, AD.PHONE1)) PHONE1
  

  And then you would hold the outer joins. What this will do is:
  Use the CAD address if it exists.
  If it is not (and therefore is NULL), he would use the address MAD.
  If it is also null, it will use the AD address.

• Navigate between the report and dashboard and pass values between another column

  Hello
  
  I have a question about navigate from 1 report to a dashboard page passing value from column 1 to column 2 in the second report...
  
  In OBIEE 11 G, I create link action report 1, column 1 and this link from the action is go to the content of the BI and the destination is a dashboard page, which has used 2 column as a dashboard and there are 3 reports that all use column 2 to filter. Now, the dashboard page 2 column is an alias for column 1 report 1, from the point of view of users, these are the same, but OBIEE point of view, they are different.
  
  My action link is able to access the dashboard, however, the value in column 1 which I clicked on run navigation, not are placed in column 2 as the line of dashboard does not receive this value when navigating...
  
  Since I can't put column 1 in dashboard 2, nor that I can put the 2 column in the report 1. Because our data model is done in the way that if I use column 1 or 2 in both cases, it will be o-ring...
  
  Is there a way around this problem?
  
  Let me know if I need to elaborate
  
  Thank you

  Hello

  You are going to have three main dashboard page (i.e., dashboad1, 2, 3) in the dashboard you will be having 3 different relationship with different column aliases (e.g. columnx_alias1, columnx_alias2, columnx_alias3) and you're going to have a dashboard more page say dashboardx a report with columnx. Now if you click on report of dashboard1 to go to dashboardx, click on report of dashboard2 also should go to dashboardx, click dashboard3 report should also go to dashboardx.

  1 > you can create 3 variable presentation for column 3 aliases and hide. {{{You can use the union query in sql result say columnx select from table where columnx='@{column1}' union select columnx table where columnx='@{column2}' union select columnx table where columnx='@{column3}'.
  2 > now you can hide these guests with variables.

  Please let me know if you are facing a problem.

  Thank you
  Yacoub

• F4 key doesn't work does not after El Capitan upgraded for my MacBook Pro. Used to be the date and time. Anyone know where to find it now?

  When I upgraded my MacBook Pro to El Capitan, the F4 key that allows to display the date, time and calendar has stopped working. Anyone know if this is not supposed to want to work more? Or how I can quickly display the date and time as I'm used to using the F4 function key?

  On my Mac running 10.11.2 which brings to the top of the dashboard. I think that there are now three different ways to make in the face of dashboard elements, which seem completely obscure to me. I just set mine to do what he did originally come in an overlay with the widgets running.

  Look in System Preferences > Mission Control...

  to halfway to the bottom of the box:

  Dashboard: {as overlay, like space, Off}

• # Variable of the ButtonFields and methods

  Hello everyone, I have a question that I cannot resolve with my current knowledge and impossible to find an alternative on the internet. So here:

  I want to add a variable number of buttonfields (according to the data from the database). But the problem is how to raise the event by clicking on buttons? There is the example of code I wrote:

  While (MoreData)

  {

  ButtonField myButton = new ButtonField (ans.getText (), FIELD_HCENTER |) ButtonField.CONSUME_CLICK)

  {

  protected boolean trackwheelClick (int status, int time)

  {

  System.out.println (nameID.ToString () +""+ stateID.toString ());

  Returns true;

  }

  };

  Add (MyButton);

  }

  Please don't be concerned about the names of variables etc, the only problem is that I can't see nameID and stateID on the console. so somehow the buttons I created in the loop do not have their events. What should I do?

  If you create it with consume_click navigationclick button is not executed. You can do either one, not both.
  If you return true in your button navigationclick it consumes as well.
  Another option is a fielchangelistener (with consume_click)

  There are several possible approaches to identify your buttons if you are using a fieldchangelistener:
  the simplest would be to store all buttons added in a data structure like a vector. You can decide the measures to be taken by index.
  You can also create your own class that extends the button and characteristics of identifier, similar to html buttons that have a label and a control (invisible).

• Using variables in the command 'get-stat"powercli

  Hello

  I try to collect data via powershell and vsphere powercli I would like to pass several stat ID, both using variable that contains my ID stat list.

  (1) when I do this...

  Get-stat - entity (get-vmhost $host_id) - mem.active.average, sys.resourcecpuusage.average real-time stat - maxsamples 1

  ... It works very well

  (2) when I do this...

  $list = "mem.active.average".

  Get-stat - entity (get-vmhost $host_id) - stat $list - realtime - maxsamples 1

  ... It works fine, I can pass variables and so ID stat, one at a time.

  (3) when I do this...

  $list = 'mem.active.average, sys.resourcecpuusage.average '.

  Get-stat - entity (get-vmhost $host_id) - stat $list - realtime - maxsamples 1

  ... It does not work. PowerCLI returns... There is no entity the metric counter 'mem.active.average, sys.resourcecpuusage.average'...

  I do not understand where the problem is during the passage of variables, an idea?

  This should be

  $list = "mem.active.average","sys.resourcecpuusage.average"
  get-stat -entity(get-vmhost $host_id) -stat $list -realtime -maxsamples 1
  

  Must be an array of strings.

• Using variables for the AS2 function arguments

  Hello

  I am trying to create a function in AS2.

  After you create the function, I want to use the values stored in the variables specified for the arguments to the function instead of manually typing static values for the calculation of the service. Also, I want to use the function to assign a new value to the existing variable.

  I asked a similar question here 2 days ago and got the answer (thanks), but now I have another question - how to create the function to assign a value to the variable, the variable itself is also a function argument?

  For example, I have 6 numeric variables:

  var CoinA:Number = 10;
  var CoinB:Number = 20;
  var CoinC:Number;

  var CoinD:Number = 30;
  var CoinE:Number = 40;
  var CoinF:Number;

  Then I tried to create a function to assign values to the variables stuck and CoinF:

  function CalculationA(FirstCoin,_SecondCoin,_ThirdCoin):Void {}

  FirstCoin = SecondCoin + ThirdCoin;

  }

  CalculationA (stuck, CoinA, CoinB);
  CalculationA (CoinF, stuck, CoinF);

  The code above didn't really affect the values of 30 and 70 stuck and CoinF variables, but instead, stuck and CoinF values are undefined.

  Please give me the correct code if there is a good way to do this.

  Thank you

  Here's a way to do it, passing a string value with the name of the variable instead of the actual variable name...

  var CoinA:Number = 10;
  var CoinB:Number = 20;
  var CoinC:Number;
  var CoinD:Number = 30;
  var CoinE:Number = 40;
  var CoinF:Number;

  function CalculationA(FirstCoin,_SecondCoin,_ThirdCoin):Void {}
  This [FirstCoin] = SecondCoin + ThirdCoin;
  }

  CalculationA ('stuck', CoinA, CoinB);
  CalculationA ("CoinF", CoinD, person);

  (Note that in your second function call, I changed coins since CoinF (ThirdCoin) is not defined at this time).

• Using variables in the multiplication, etc. - syntax

  Hello
  
  I wrote a script where I want to calculate a result based on certain mathematical operations.
  
  To make readable and easy to manage form I'm storing data in variables.
  
  But while the script does not give an error when downloading, it translates into error when executing the routine calculation of HFM.
  
  I think that I do not give a syntax that is appropriate to the operation of multiplication, and it would be a great help if someone can tell me the errors
  
  The script is the following:
  
  VOID Exch_Rate_CF
  
  Dim PreRetEarn
  Dim PreRetEarn
  
  PreRetEarn = "(A#Exch_RetEarn.Y#Prior.P#Last.I#[ICP None].)" #C3 #[no]. C1 #USD. (C4#[None]) ' ' Gets rate as stored in the previous year
  PreRetEarn = "(A#300110.Y#Prior.P#Last.I#[ICP None].)" C1 #Total PC. (C2 #All Region.C3#Net Adjusted.C4#NotApplicable) ".
  
  If HS. PERIOD. MEMBER = 'July' and HS. VALUE. MEMBER = "Entity currency <>" THEN
  
  GSA EXP ' has #Exch_RetEarn.I #[ICP None].» C1 #USD. C3 #[no]. C4 #[none] = "& PreRateEarn * PreRetEarn»
  
  ON THE OTHER
  
  END IF
  
  END SUB
  
  (If this is successful that I still have to do is add the benefits of the previous period to the rate and gap closing by total to arrive at the weighted average rate history for profit not distributed)

  Try to use this

  GSA EXP ' has #Exch_RetEarn.I #[ICP None].» C1 #USD. C3 #[no]. C4 #[none] = "& PreRetRate &" * '& PreRetEarn '.

  Hope this helps
  Nick

• using variable in the select statement (php)

  I have trouble using a variable in a select statement.
  
  The following query to manually (using a static date) works very well:
  
  $query_Recordset1 = "SELECT * from academyClasses WHERE the classDate > ' 2006-06-01' ';"
  
  However, if I use the following:
  
  $dateVar = date('Y-m-d');
  
  @mysql_select_db ($database_mw, $mw);
  $query_Recordset1 = "SELECT * from academyClasses WHERE the classDate > $dateVar";
  
  All records are returned, which means that the $dateVar variable is not recognized. I compared the values of $dateVar <? PHP echo $datetime;? > against the real value of my date field <? PHP echo $row_Recordset1 ["classDate"];? > in my results to the table and it seems that the values are indeed accurate regarding a date 2006-06-04 for example.
  
  My date field 'classDate' is of type 'date' in the mysql database. I use Dreamweaver MX 2004 with Mac OSX 10.3.9.
  
  I'm sure it's just a syntax problem, at least, I hope it is.
  
  Any help is greatly appreciated.
  
  
  
  

  It worked:

  $query_Recordset1 = "SELECT * from academyClasses WHERE the classDate > = CURRENT_DATE;

  Thank you
  MW

• Is there a process or program that I can use to restore the system and configuration of the system to the original

  Hello

  I would like to know if there is a microsoft tool or a suggested list of Microsoft that could help me restore the system and the system configuration files in the appropriate State. is not the restoration of the system. I don't know of retoring my computer to an earlier time, nor on the restoration of computer purchase. 

  I thought that my computer has been compromised in some way, and the intruder was accessing my unit via some sort of connection distance.

  I received the support of the malicious software company, and I think that my computer is fine now.

  And so the question with which I opened this post: I would like to know if there is a Microsoft tool or a suggested list of Microsoft that would help me to restore the system and the system configuration files in the appropriate State. I'm not taling about system restore. I speak not of retoring my computer to an earlier time.

  Whenever I start to notice the strange behaviour of my computer, I would like to launch this program and follow this procedure to reset all the settings and files to a suitable State. The reason why run alone to detect malware problems, and that if there is remote access to my computer inadvertently, the intruder can do a lot of editing of files which is not identified by the malware. and I believe that if I was able to run a program like this, all the changes took place, which expose my device, but the rules of behavior systems can be reversed for a proper state.

  I read an article on how to repair my operating system, but it forced me to get a copy of it; However, given that the supplied operating system with preinstalled on this computer, I could not follow the instructions. Article I read to all system and configuration files that meet the standards of the manufacturer, without losing files and installed programs.

  Thank you

  Hello

  Already, you mention that you can do; either a repair installation.

  "How to do a repair installation to repair Windows 7"
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  And make sure that read you all the information under 'warning'.

  It also tells you what drives you can and cannot use to do.

  ________________________________________________

  You can use this to fix the corrupted system files.

  "Command SFC/scannow - System File Checker.

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  «Use the System File Checker tool to repair missing or corrupted system files»

  http://support.Microsoft.com/kb/929833/en-us

  But if SFC detect serious errors in the file system, you may need to do a repair installation as in the instructions in the first part of this answer.

  See you soon.

• Payment plan for the photographer and the creative shift and cannot use photoshopPayment for the photographer and the creative shift plan and may not use photoshop

  Payment plan for the photographer and the creative cloud and can't use photoshop

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "