Using variables in the command 'get-stat"powercli

Similar Questions

• This operation is limited by the administrator of the error when you run the command get-stats

  I have a script that use to collect monthly performance report - but after the upgrade of the CR, the script fails with the error below

  Get-Stat, this operation is limited by the administrator - "vpxd.stats.maxQueryMetrics". Contact your system administrator.

  I tried after the Ko -https://kb.vmware.com/kb/2107096 , but I don't see the webclient service performance

  Please notify

  As you use the API and not the Web Client, you need only modify the value in the advanced settings of vCenter.

  This can be done with

  Note that the value of-1 disables the limit altogether.

  The default value is 64.

  Get-AdvancedSetting - YourvCenter of the entity-name config.vpxd.stats.MaxQueryMetrics |

  Game-AdvancedSetting - value - 1

• Using the cmdlet Get-stats for the problems of performance of ESXi

  I need to detect the bottlenecks (if any) causing poor performance with a (free) 5.5 ESXi host.

  I see that if I use the cmdlet Get - stat PowerCLI I get dozens of meters, such as "mem.usage.average" or "'rescpu.maxlimited1.latest ', just to give two samples. "

  Can I identify a subset of the counters I should follow to identify possible bottlenecks in the fastest way possible?

  Concerning

  Marius

  Everything depends of course.

  There are several positions which list a number of key counters to watch.

  The Hosts of ESXi monitoring - a deeper on the what and the why look , you will find a good starting set.

• Can not find templates of virtual machine by using the command 'Get Template '.

  Hi all

  My apologies if this question was asked before, but not could not find any information about this.

  For some reason when I use the command Get-model PowerCLI I get no results even though I have models on the data store. Using a command such as Get - VM works as expected, but for some reason that the command Get-model just can't find anything. There is something pressing that I may have missed in my virtual environment configuration?

  The environment consists of a data center with a 5.1 ESXi host and several virtual machines residing on it. I also have a virtual appliance of vCenter to manage the host.

  Thank you

  Matt

  Hi Matt,

  When you run Connect-VIServer, you connect to the server ESXi and vCenter?

  I just tested the two:

  • SE connect-VIServer-ESXi Server
    • Get-model didn't recover all data
  • SE connect-VIServer-Server vCenter
    • Get model retrieved data

  Maybe that's the case?

  Hope this helps,

  Steven.

• using the function - how to use the values of the input variables on the table select statement names

  Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.

  CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  )

  RETURNS INTEGER

  AS

  -Declaring variables

  v_is_true INTEGER.

  BEGIN

  SELECT

  CASE

  WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)

  THEN 1

  ON THE OTHER

  0

  END

  IN

  v_is_true

  Of

  in_schema.in_tablename

  ;

  RETURN v_is_true;

  END;

  /

  When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist

  How to use the values of the input variables on the table select statement names?

  Hello

  Here's a way you can use dynamic SQL statements for this task:

  CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE

  (

  in_schema IN VARCHAR2,

  in_tablename IN VARCHAR2,

  in_datefield IN VARCHAR2,

  in_first_date DATE DEFAULT SYSDATE - 1,.

  in_last_date DATE by DEFAULT NULL

  )

  RETURNS INTEGER

  AS

  -IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield

  -contains all the dates in the in_first_date of the range through included in_last_date

  - and it returns 0 if there is no such lines.

  -If in_last_date is omitted, the search only the data on in_first_date.

  -If in_first_date is omitted, it defaults to yesterday.

  -Time parts of the in_first_date and in_last_date are ignored.

  -Declaring variables

  sql_txt VARCHAR2 (1000);

  v_is_true INTEGER.

  BEGIN

  sql_txt: = 'SELECT COUNT (*).

  || 'FROM ' | in_schema | '.' || in_tablename

  || 'WHERE ' | in_datefield | ' > =: d1'

  || «AND» | in_datefield | '< >

  || 'AND ROWNUM = 1';

  dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE");  -For debugging

  Sql_txt EXECUTE IMMEDIATE

  IN v_is_true

  With the HELP of TRUNC (in_first_date) - d1

  TRUNC (NVL (in_last_date

  in_first_date

  )

  ) + 1                -- d2

  ;

  RETURN v_is_true;

  END is_ydaydata_to_table;

  /

  DISPLAY ERRORS

  If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above.  In this way, you can easily see exactly what will be executed.  Comment out the call to dbms_output under test is completed.

  Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future.  For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days.  The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).

• Pass Pl/sql table in the USING clause in the EXECUTE IMMEDIATE statement

  Getting error when I try to pass the PL/SQL table in the USING clause in the EXECUTE IMMEDIATE statement:
  
  Declare
  result NUMBER;
  TYPE values_tab IS TABLE OF NUMBER INDEX OF directory;
  lv_tab values_tab;
  lv_exp varchar2 (300);
  lv_exec varchar2 (300);
  BEGIN
  lv_tab (1): = 5;
  lv_tab (2): = 48;
  lv_tab (3): = 7;
  lv_tab (4): = 6;
  lv_exp: = ': + b1: b2 + (: b3 *: b4)';
  lv_exec: = 'SELECT'. lv_exp | ' THE DOUBLE '.
  
  IMMEDIATE EXECUTION
  lv_exec
  IN
  result
  USING
  lv_tab;
  DBMS_OUTPUT. Put_line (result);
  
  END;
  /
  
  Error on line 1
  ORA-06550: line 20, column 12:
  PLS-00457: expressions must be SQL types
  ORA-06550: line 15, column 8:
  PL/SQL: Statement ignored
  
  
  I am trying to evaluate the expression ': + b1: b2 + (: b3 *: b4) "which is stored in the table. This table has different expressions (expressions about 300). I want to use the bind variable in the expression because each expression evaluated thousands of time may be more in some cases. If I use bind variable can he fill pool.
  
  Is there a way I can pass parameters with the HELP of (IN) dynamically instead of write "help lv_tab (1), lv_tab (2), lv_tab (3), lv_tab (4)? As number of change of the input parameters depend on the expression in the table.
  
  If it is possible please suggest any other ideas/approaches
  
  Help, please...
  
  Published by: satnam on June 11, 2009 11:50

  Well, you keep changing faster reqs that I can follow. In any case, assuming that N-th variable bind (left to right) corresponds to n-th collection item:

  Declare
      result NUMBER;
      lv_tab values_tab := values_tab();
      lv_exp varchar2(300);
      lv_exec varchar2(300);
      lv_i number := 0;
  BEGIN
      lv_tab.extend(4);
      lv_tab(1) := 5;
      lv_tab(2) := 48;
      lv_tab(3) := 7;
      lv_tab(4) := 6;
      lv_exp := ':5000135+:5403456+(:5900111*:5200456)';
      lv_exec := lv_exp;
      While regexp_like(lv_exec,':\d+') loop
        lv_i := lv_i + 1;
        lv_exec := REGEXP_REPLACE(lv_exec,':\d+',':b(' || lv_i || ')',1,1);
      end loop;
      lv_exec := 'BEGIN :a := ' || lv_exec || '; END;';
  DBMS_OUTPUT.PUT_LINE(lv_exec);
  EXECUTE IMMEDIATE lv_exec USING OUT result,IN lv_tab;
  DBMS_OUTPUT.PUT_LINE(result);
  END;
  /
  BEGIN :a := :b(1)+:b(2)+(:b(3)*:b(4)); END;
  95
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• How do I see the full message with the command Get-VIEvent

  Hello list,

  I was trying to see the VIevents with the command get-vievent as below

  Get-VIEvent-type error - MaxSamples 20 | Format-Table Createduserid, FullFormattedMessage - autosize

  In this case, if it's a great message, the fullFormattedMessage displays incomplete messages (for example/error found on & lt;) ESX IP & gt; in & lt; Centre for data & gt ;...) ... what should I wear to display the full message with the command Get-VIevent?

  Thank you

  Krishnaprsad

  This is the Format-Table cmdlet, which shows only a part of the message.

  If you want to see the full message, you could do

  Get-VIEvent -Type Error -MaxSamples 20 | %{Write-Host $_.CreatedTime $_.FullFormattedMessage}
  

  The alternative is to adapt the formatting instructions in the VMware.VimAutomation.Format.ps1xml file.

  But that could impact other cmdlets and is a bit more complicated.

• Use of variable in the For-Each statement

  Hello gurus.
  
  I'm having a problem using a variable, I created in a statement for each. Here is the code I am using
  My goal is to create a variable based on the type of Bill. If the invoice is a proof or a reprint, a copy should be printed. If it's a final bill, I need two copies.
  
  <? xdoxslt:set_variable($_XDOCTX,_'x',_0)? >
  for each<? If: Print_Additional_Header_Text_ID238 = "PROOF"? > <? xdoxslt:set_variable($_XDOCTX,_'x',_1)? > <? end if? >
  <? If: Print_Additional_Header_Text_ID238 = "REPRINT"? > <? xdoxslt:set_variable($_XDOCTX,_'x',_1)? > <? end if? >
  <? : otherwise (Print_Additional_Header_Text_ID238)? > <? xdoxslt:set_variable($_XDOCTX,_'x',2)? > <? end if? >
  <? xdoxslt:get_variable($_XDOCTX,'x')? > <? for-each@section:xdoxslt:foreach_number($_XDOCTX,1,$x,1)? >
  
  foreach is the loop that I use to repeat sections of the Bill.
  
  When I run with the last impression for each preview, I get an error that says "undefined variable: 'x'"»
  But when I remove the last for each good variable, 1 or 2, will show in the invoice.
  
  My question is: How can I use the variable 'x' in <? for-each@section:xdoxslt:foreach_number($_XDOCTX,1,$x,1)? >
  
  TIA
  Darius
  
  Published by: 852460 on May 24, 2011 08:31
  
  Published by: DEK17 on July 20, 2011 13:15

  Probably, this will help you

  http://winrichman.blogspot.com/search/label/multiple%20copy

  Try

  
  or
  
  

• How to use variables in the report?

  Hello all,.
  I'm new to PlSql. Please bare with me.
  
  I have a report that runs on SSRS.
  Here is what I need it to do:
  
  When the report is run:
  1st of the month: it pulls the data from the previous months.
  16th of the month: from the 1st of the current month to 15.
  
  I am trying to use a case statement to find the right date and then use this value to ReportDate.
  ReportDate is a column in the database.
  
  -Find the 1st of the month
  SELECT
  CASE
  WHEN SYSDATE > last_day (add_months (SYSDATE-1))
  AND SYSDATE < last_day (add_months (SYSDATE,-1)) + 2
  THEN
  ReportDate = last_day (add_months (SYSDATE-2))
  
  ON THE OTHER
  SYSDATE
  END ReportStartDate,
  
  With the help of 10G.
  Again, I'm pretty new to this, so go easy. Let me know if I can provide any other details.

  Hello

  Welcome to the forum!

  1009545 wrote:
  Hello all,.
  I'm new to PlSql. Please bare with me.

  Certainly not! Isn't this kind of a site!
  Did you mean "Please * bear * with me?"

  I have a report that runs on SSRS.
  Here is what I need it to do:

  When the report is run:
  1st of the month: it pulls the data from the previous months.
  16th of the month: from the 1st of the current month to 15.

  What happens if it is running on another day of the month?
  The query below uses leans on the previous month when it circulates at any time from 1, in the 15th day of the month, inclusively and leans on the 1st to the 15th of the current month when run 16 or later.

  I am trying to use a case statement to find the right date & then use this value to ReportDate.
  ReportDate is a column in the database.

  -Find the 1st of the month
  SELECT
  CASE
  WHEN SYSDATE > last_day (add_months (SYSDATE-1))

  ADD_MONTHS (SYSDATE-1) will always be some time this month, then
  LAST_DAY (ADD_MONTHS (SYSDATE-1) will also be the previous month, but)
  SYSDATE is always in the current month,
  SYSDATE > ADD_MONTHS (SYSDATE-1) will always have the value TRUE.

  AND SYSDATE< last_day(add_months(sysdate,="">
  THEN
  ReportDate = last_day (add_months (SYSDATE-2))

  It's 2 months in the past. Are you ever interested in this old stuff? Areen can't you always interested in 1 months ago, or the current month?

  ON THE OTHER
  SYSDATE
  END ReportStartDate,

  With the help of 10G.
  Again, I'm pretty new to this, so go easy. Let me know if I can provide any other details.

  Whenever you have a problem, post CREATE TABLE and INSERT statements for some examples of data and outcomes from these data.
  See the FAQ forum {message identifier: = 9360002} it only takes a few minutes to read and can really help you get the most out of this forum.

  I think you want something like this:

  WITH     period_of_interest     AS
  (
       SELECT     CASE
                WHEN  TO_CHAR (SYSDATE, 'DD') < '16'
                                         -- should be '16' above.  See note
                THEN  TRUNC ( ADD_MONTHS (SYSATE, -1), 'MONTH')
                ELSE  TRUNC (             SYSDATE    , 'MONTH')
            END     AS period_start
       ,     CASE
                WHEN  TO_CHAR (SYSDATE, 'DD') < '16'
                THEN  TRUNC (SYSDATE, 'MONTH')
                ELSE  TRUNC (SYSDATE, 'MONTH') + 16
            END     AS period_end
       FROM    dual
  )
  SELECT     ...
  FROM     table_x              x
  JOIN     period_of_interest  p  ON  x.transaction_date >= p.period_start
                        AND x.transaction_date <  p.period_end
  ;
  

  Period_end is a somewhat misleading name for the column; It's actually the first DATE after the end of the period; That's why I used < (and not < =) when compared to the x.transaction_date.

  I'm not sure what ReportDate is in your description. This is an example of timid, you must validate CREATE TABLE and INSERT statements for some examples of data. It could be that ReportDate is just what I called transaction_date above.

  Published by: Frank Kulash on June 3, 2013 16:55
  This site is falling out my code. It seens to think the in the first

  WHEN TO_CHAR (SYSDATE, 'DD') < '16'
  

  indicates a kind of markup and will not display the '16', even if I put it on a separate on its own line.

  Published by: Frank Kulash on June 3, 2013 17:09
  Used & lt; to correct the estrangement, after sentries below.

• Presetation Variable in the command prompt

  Hi all
  
  I used 11.1.1.6.5 OBIEE
  
  Two columns of the Source in the analysis is as below:
  
  Time - amount of appeal
  01:30 - 12
  01:40 - 11
  01:42 - 22
  
  I have create a dashboard quickly with these two columns, filter "is fast" in the analysis.
  When I select 00:28 and 01:41, it shows:
  Time - amount of appeal
  01:30 - 12
  01:40 - 11
  
  But I want to see as below:
  
  Time - amount of appeal
  00:28 - 01:41 - 23 -it is equal to 11 + 12
  
  Any body know how?
  
  Kind regards
  Anne
  
  Published by: anne on December 17, 2012 20:20

  1. so how to set two variables timeliness? It's just may define a variable presentation for a column, I'm right?

  --> Pull the two columns and change the sql code that invites including pull time values and go to presentation variables
  2 use variable presentation, how to convert time column(00:30,00:40) what I want, such as ' 00:28 - 01:41.
  --> You can concat any two variables of presentation for this release since it is of type char

  Question about your design:
  Since you are dealing with the minutes in the form of hours you assume to have these time info in a table or in with the reference of every minute of the day ex:
  Table call as MinuteDay demonstrate
  row_wid--> hour
  1--> 00:01
  2--> 00:02
  ....
  --> 00:59 59
  100--> 01:00
  101--> 01:01
  ......
  2300--> 23:00
  ......
  2359--> 23:59

  This row_wid should join table amount
  To get your result as
  00:28 - 01:41 - 23 -it is equal to 11 + 12

  Select
  min (Hour) | » -' || Max (Hour), Sum (Qty) of MinuteDay, quantity
  where MinuteDay join quantity
  and row_wid between 28 and 141

  Correct it wherever necessary... just sharing reflect on design... Since your case the lowest granularity is minutes...

  If help pls mark or correct me if I'm wrong :)

  If you want to discuss more to send me e-mail, I tried to send the same e-mail message before my initial speech has delineated...

• Using variables in the interface

  Hello
  
  I have a variable which contains this statement: select max (ID) + 1 from table1
  In an interface I try to map the ID from table1 with this variable, but I still have the same error: violation of KP.
  
  I tried with a problem too but same sequence

  Hello

  I believe that this happens because of the following

  (1) your target T table has a PK/UK set on column ID.
  (2) variable in the select query is: select max (ID) + 1 t
  (3) to assume that select max (ID) + 1 t returns 5
  (4) now in the package you refresh the Variable, and it is up to 5 for all lines
  (5) 1st row insertion will work as ID column becomes a new value so no PK/UK breach
  (6) but 2nd, 3rd... .Nth line insert also get value from column ID 5! By thus breach PK/UK

  Thank you
  Fati

• Using variables in the queries and dashboards

  Hi Freinz,
  
  I am using a prompt and dashboard based on the selection in the guests shud of data filled.
  
  I used the query variable line dashboard option and creates reference static variables of the administration.
  
  I created the 'green' variable and in the applications for the "VERTICAL" column, I put the variable as being of 'green '.
  It is the same value as I gave in the prompt variable set dashboard-> variable query.
  
  Guyz pls help me...
  
  Pls let me know the steps to follow.
  
  How shud I? the values in the row of dashboard applications /
  
  Thank you
  Veena

  In the report, create a filter of coming and going VERTICAL. In the filter creation, click on Add - Variable - presentation, now in the Expr variable name of the variable, the default value indicates no value for this PORTRAIT.

  Now, put your prompt and the dashboard report, test.

• Use variables in the names of MovieClip to call ASP 3.

  This line of code works very well for me:

  this.helpB1Btns.helpB1B3.alpha = 0.3;

  But I wonder how can I use variables instead of numbers (1 and 3) above?

  I mean for example:

  var i: int = 1;
  var j: int = 3;

  This ["helpB" + i + "BTNS.helpB" + i + "B" + j + '.alpha'] is 0.3;. Error
  ["helpB"+ i + "Btns.helpB" + i + "B" + j +".alpha '] = 0.3; Error
  This ["helpB" + i + "Inclinometer"]. ['helpB' + i + 'B' + j ".alpha"] plus 0.3; Error

  For example, this code works fine:

  This ["helpB" + i "Inclinometer"] .alpha plus 0.3;

  (this.helpB1Btns.alpha = 0.3 ;)

  But I have no idea of this code:

  this.helpB1Btns.helpB1B3.alpha = 0.3;

  I appreciate your help or no matter what reference I could learn this basically?

  yours,

  Ali

  use:

  This ["helpB" + i + "Inclinometer"] ['helpB' + i + 'B' + j] .alpha = 0.3

• using variable in the select statement (php)

  I have trouble using a variable in a select statement.
  
  The following query to manually (using a static date) works very well:
  
  $query_Recordset1 = "SELECT * from academyClasses WHERE the classDate > ' 2006-06-01' ';"
  
  However, if I use the following:
  
  $dateVar = date('Y-m-d');
  
  @mysql_select_db ($database_mw, $mw);
  $query_Recordset1 = "SELECT * from academyClasses WHERE the classDate > $dateVar";
  
  All records are returned, which means that the $dateVar variable is not recognized. I compared the values of $dateVar <? PHP echo $datetime;? > against the real value of my date field <? PHP echo $row_Recordset1 ["classDate"];? > in my results to the table and it seems that the values are indeed accurate regarding a date 2006-06-04 for example.
  
  My date field 'classDate' is of type 'date' in the mysql database. I use Dreamweaver MX 2004 with Mac OSX 10.3.9.
  
  I'm sure it's just a syntax problem, at least, I hope it is.
  
  Any help is greatly appreciated.
  
  
  
  

  It worked:

  $query_Recordset1 = "SELECT * from academyClasses WHERE the classDate > = CURRENT_DATE;

  Thank you
  MW

• Using variables in the multiplication, etc. - syntax

  Hello
  
  I wrote a script where I want to calculate a result based on certain mathematical operations.
  
  To make readable and easy to manage form I'm storing data in variables.
  
  But while the script does not give an error when downloading, it translates into error when executing the routine calculation of HFM.
  
  I think that I do not give a syntax that is appropriate to the operation of multiplication, and it would be a great help if someone can tell me the errors
  
  The script is the following:
  
  VOID Exch_Rate_CF
  
  Dim PreRetEarn
  Dim PreRetEarn
  
  PreRetEarn = "(A#Exch_RetEarn.Y#Prior.P#Last.I#[ICP None].)" #C3 #[no]. C1 #USD. (C4#[None]) ' ' Gets rate as stored in the previous year
  PreRetEarn = "(A#300110.Y#Prior.P#Last.I#[ICP None].)" C1 #Total PC. (C2 #All Region.C3#Net Adjusted.C4#NotApplicable) ".
  
  If HS. PERIOD. MEMBER = 'July' and HS. VALUE. MEMBER = "Entity currency <>" THEN
  
  GSA EXP ' has #Exch_RetEarn.I #[ICP None].» C1 #USD. C3 #[no]. C4 #[none] = "& PreRateEarn * PreRetEarn»
  
  ON THE OTHER
  
  END IF
  
  END SUB
  
  (If this is successful that I still have to do is add the benefits of the previous period to the rate and gap closing by total to arrive at the weighted average rate history for profit not distributed)

  Try to use this

  GSA EXP ' has #Exch_RetEarn.I #[ICP None].» C1 #USD. C3 #[no]. C4 #[none] = "& PreRetRate &" * '& PreRetEarn '.

  Hope this helps
  Nick