STOR. E TV + restarts after the end of the video

Similar Questions

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• After removing the Tdss rootkit, computer laptop My Windows Vista Home Premium keeps restarting after the connection. __

  I had the Tdss rootkit on my laptop and removed using TDSS Killer of Kasperky. After the reboot, I have connected and saw a box that displays "Please Wait". After 5 to 10 seconds, my computer restarts. After the reboot, it shows options for Windows Vista loading, i.e. the safe mode, safe mode with network. I chose the mode safe mode with networking and everything works fine. The system properties box opens automatically. When I try to boot into normal mode, he repeated restart after the connection. I tried to run a restore of the system into safe mode with networking, but it tells me something about the system restore is in mode offline. I hit a brick wall and don't know what to do next. I don't want to if I have more options to factory default restore.

  The TDSS rootkit is very destructive.  It is not uncommon to make a computer work is not properly after removing it.  I advise you to restore your computer to factory default.  Not only is this the best option, it's the safest option.  I wouldn't consider the computer to be trusted without going through the restore process.  Even if you can be sure that 100% of the infection has been removed, you have no way of knowing what changes the malware made to the settings on your computer, which may be exceptionally vulnerable to future malware attacks.

• Mac restarts after the last security update

  Hello, I upgraded my imac (late 2009) to El Captitan, a few days ago and everything went well and I had no problem to use it after the upgrade.

  Yesterday I tried to update the last security fix (2016-001 10.11.6) and now it will not re - start. I get a clear grey screen with a circle with a line through it.

  Can anyone help please?

  Hello SallyP,

  Thank you for using communities of Apple Support. It is my understanding of your light a circle with a bar symbol backslash when you try to start your iMac. I use my iMac every day and I would be very concerned if he does not start correctly. I'm happy to help you.

  This particular screen means that your Mac could not find a valid system folder from upward. I recommend that you try reinstalling OS X using OS X Recovery. Please follow the steps below.

  To boot from OS X Recovery, hold down the command (⌘) r immediately after start-up or that you restart your Mac. Release when you see the Apple logo. If you can not boot from OS X Recovery, now try the Command + Option + R key at the start of the OS X Internet Recovery*.

  Start-up is finished when you see the window OS X Utilities

  Recovery of OS X

  Once your Mac OS X Recovery, choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.

  Also, here is some very useful information on the different screens that display when starting.
  On the screens you see when your Mac starts up

  Have a great day!

• iMac restarts after the first start since 10.11.6

  Hello

  Since updating to OS X 10.11.6 my mid 2010 27 "iMac (iMac11, 3) restarts after a few minutes of availability.

  It happens right after a few seconds.

  The screen goes black, and then it displays this message. After the reboot, everything works fine.

  

  Please post a report of EtreCheck of your system if you can get it to boot. Then we can consider for obvious questions that may be causing your problem.

  A cause can be if you have any antivirus, cleanup or third-party maintenance utilities installed. Do you have?

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Infinite system restarts after the interruption of critical update

  Hello
  I have windows vista and after having worked on my pc (write an email), my computer is automatically restarted because of a windows update (one of these auto restart after that 5 minutes if I don't cancel) However, whenever he hits the stage 3 3 update, it will automatically restart again! After about 10 restarts I tried to start in safe mode, but it always strikes the same problem.
  Anyone know what I can do?
  Thank you!

  Hello

  If you have the vista installation disk, you can try to repair the computer and try to perform a startup repair.

• my laptop keeps restarting after the installation of updates

  my laptop is stuck at step 3 of 3 (only display 0% complete) after the reboot for updates, then restart again and again, with the same supposed progress, I ve let it doesn't restart on 7 times.still no good.

  Tell me what are the steps to solve this problem

  Hi Amrbialy,
  When your computer is turned on, push and hold down F8, this will bring an option before it starts on your desktop. Choose "last known good configuration".
  If this has no effect. Then do the same thing, except choose Safe Mode. When it boots to desktop click Start > all programs > Accessories > system tools > system restore.

  Then it will give you an option to choose a date to return. Choose a date before you install updates, and then click OK. Restart your computer.

  It will be useful.
  Let us know how it goes!

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Phone keeps restarting after the last update

  After the start of the update of the configuration via Sony PC Companion, this program that, at the time, my PC is getting ready (and it will take some time) himself said update I can unplug my phone or not, so I am disconnected and then I pluged in again. Phone started the update (it is turned off and started the update) and release suddenly came out telling me that my phone is connected. Sony PC Companion tells me to unplug and restart, after that my phone keeps restarts all the time.
  HELP ME GUYS!

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• PC keeps restarting after the Windows startup screen

  I recently bought a refurbished HP compaq 6005 microtour office format. The computer came with a blank hard drive with no OS loaded on this subject. Before this purchase, I owned a laptop with a Samsung EVO 850 250 GB SSD inside which has Windows 7 installed and worked fine until the motherboard went bad on it. I removed the SSD that laptop and installed in the new office refurbished. The computer starts up and reaches the HP invent display shows options key function and says "press any key to Option ROM Messages." and then after a few seconds goes to "starting Windows" screen and after a few seconds it goes back to the same HP invent screen.

  I tried the things:

  The hard drive is detected by a name in BIOS

  Made sure boot order has been on hard drive, first

  Tried to start Windows in Mode safe mode, last known good configuration and disable automatic restart in the event of system failure

  When I disabled automatic restart in the event of system failure I got a blue screen that says, "a problem has been detected and windows was forced to need down to avoid any damage to your computer...". ""Search for viruses on your computer. " Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. ... "CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Hello David,.

  According to your description, I realize you are trying to install a Portable SSD hard drive in a desktop computer that has Windows 7 installed on it.

  First of all I would say you do not to do since both hard drives have different specifications, and this can adversely affect your computer. I suggest you to contact the manufacturer of your computer before this change of material.

  On Windows, it is not recommended to mix computers with different operating system installed on a hard drive specifications. I would say to reinstall the full operating system such that two computers use different Hardware.

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

  Thanks and greetings
  Sarandeep S - Microsoft technical support.

• T42 - stop and restart after the connection

  My T42, running on Windows XP, suddenly stops right after the connection and while the hotkeys on the loading screen.

  A message in white letters on a blue screen starts like this:

  "A problem has been detected and windows has been suthdown to prvent from damage to your computer.

  IRQL_NOT_LES_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. "If this screen appears again, follow these steps:

  And the product message points to check any new hardware or software installation. I have not recently installed a software or hardware, so I'm a little lost on how to proceed from here.

  No clue on what could be the problem or any recommendation, short doing a full recovery from a recent backup?

  Any help will be much appreciated. Thenks.

  = UPDATE =.

  After running a few tests using the blue Access IBM button and PC Doctor 2.0 running, memory tests have shown the following results:

  Fast memory - all sockets - failed

  Fast memory - Support 1 - spent

  Fast memory - take 2 - failed

  This seems to indicate that one of the two memory is faulty. This hypothesis is correct?

  If so, what should be the next step? My laptop is out of warranty. I should bring it to a repair shop, or could I order the replacement and install it myself easily?

  I am not versed in repairs to equipment and feel a bit discouraged to start to mess with storage media...

  Any advice, please?

  Thank you

  It is probably a faulty stick of RAM in the second location rather than the power socket. Best bet is to remove the module RAM then see how it goes.

  Second is really easy to access. It is under the laptop - there is a small door in the middle of the base set with a single screw. Remove the screws and remove the door to expose the RAM module. Pull the wire staples on the outside of the restraint SODIMM socket and the RAM module should appear and then remove. Replace the cover and try the laptop again.

  IF you must replace the T42 uses to off the shelf of a DDR SO-DIMM, PC2700 speed RAM - needs. Will take up to a 1 GB module in each socket. First is harder to do because he must remove the keyboard to get home. It is only 4 screws but can be a bit tedious for a novice.

  Edit: The instructions for IBM appropriate here: http://www-307.ibm.com/pc/support/site.wss/MIGR-46513.html