using Xbox 1 controller on an xbox 360

Similar Questions

• Can I use xbox 360 Wireless & the windows wireless receiver so that I can use two controllers in Windows?

  Original title: Wireless 360 controller.

  I bought the gamepad 360 Wireless for windows and it works fine. I also have an xbox for xbox 360 wireless controller. Can I use with the receiver windows wireless so I can use two controllers in windows? When I click on the Green x button it keeps just Charlotte. Is it possible to connect to windows?

  Thank you. In fact, I installed this software already, but thanks for the tip. It turns out that I had to click the button of synchronization on the top of the controller AND the usb thing. I think I was just clicking on the USB thing. Now, it works fine. It's never the best stick for windows. THX.  :)

• How much bandwidth/DOWNLOAD + download using xbox 360 when you play online?

  When you play COD mw2 for example, how much bandwidth is xbox 360 use? I have a download limit so need to get out.

  Thank you in advance!

  Hello

  1. what operating system do you use?

  It depends on the online games you are using, I suggest you to contact Xbox support center

  http://forums.Xbox.com/

  http://support.Xbox.com/en-us/pages/default.aspx

• Set up Media Center using Xbox 360 as Extender fails - HELP!

  I use Windows 7 64 b Assus laptop and the new version of the Xbox 360 as a media center extender on a network home wifi elapse a router Linksys E4200.  I have Norton Internet Security (v18.6.0.29) and the standard Windows Firewall on my laptop.  I have configure manually all ports right on the Norton firewall as described in the Article ID: 911728 - last review: February 16, 2010 - revision: 6.0 entitled "Firewall Ports that must be open to use your Xbox 360 as a Media Center Extender.  I get throughout the series until the last step.  Both the Xbox and the laptop appear to expire and I get an error message on the xBox that says:

  COMPLETED CONNECTION: "the Xbox 360 has been disconnected from the PC Media Center.  For technical support, visit Microsoft Support at http://support.microsoft.com".

  If I do nothing, the Xbox will attempt to restart the connection three times until I'm finally getting a message that says:

  "Xbox 360 could not connect to the Windows Media Center computer. Turn on your Xbox 360 console off and then on again and try to connect again"

  I did this several times without success. I also disabled my firewall from Norton and my Windows Firewall but still no further.  The Media Center on the laptop says it is installed and ready to use and I do not see my laptop under video library on the Xbox, but when I choose what it I get an error message that says:

  "Unable to connect. Make sure that you have activated this console on your computer.

  I copied the last entries in the log events below that shows the last attempt I made to configure the Extender. You will see a newspaper where the Extender and successfully it implements and then several error messages that I can't understand.

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:07:26
  Event ID: 506
  Task category: Configuration
  Level: Information
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  Media Center Extender account Mcx1-LESLEYSLAPTO-PC was created for the extender with the ID: uuid:10000000-0000-0000-0200-0025AE8C0070.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      506
      0
      4
      4
      0
      0 x 8000000000000000
     
      69
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      Mcx1-LESLEYSLAPTO-PC
      UUID:10000000-0000-0000-0200-0025AE8C0070
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:09:29
  Event ID: 116
  Task category: Application of the Session
  Level: error
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  The Media Center Extender session could start.

  Error: No mapping between account names and security IDS was done.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      116
      0
      2
      1
      0
      0 x 8000000000000000
     
      70
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      -2147023564
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:10:28
  Event ID: 593
  Task category: Configuration
  Level: WARNING
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  Your Media Center Extender has been implemented successfully, but a firewall can block connect the Extender to your Windows Media Center PC (expired after 180000ms).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      593
      0
      3
      4
      0
      0 x 8000000000000000
     
      71
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      180000
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:10:29
  Event ID: 116
  Task category: Application of the Session
  Level: error
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  The Media Center Extender session could start.

  Error: No mapping between account names and security IDS was done.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      116
      0
      2
      1
      0
      0 x 8000000000000000
     
      72
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      -2147023564
   
  

  The last five entries are exactly the same as above.  During this attempt, I had turned on the Firewall Norton back after that defining carefully all the rules required by the above mentioned article.  The results are the same if I have the active firewall or disabled - just says error message the connection has expired when the firewall is disabled.

  I hope someone can help me with this - I have spent all day trying to solve this and I'm at the end of my rope.

  OK, so I spent all morning pour on my router configs without success and then realized that my drive mapping had stopped working when I updated to my current router E4200.  So I double checked all configs in Windows file sharing and realized that I had activated password sharing which prevented the player sharing between my laptop and my laptop children without creating the same user accounts on each box.  Who sets and I was able to get my shared drives. Then I pulled upward to Media Center again and got exactly the same answer as before.  I thought I was really puzzled but thought I would try and open shared files, I could see on my Xbox AND THIS TIME IT WORKED!  It must have been the password of sharing that prevented the connections between the Media Center on my laptop and Xbox and he disguised himself as a firewall or setting a timeout problem that led me down the wrong path.

  Thanks for the suggestion check the router settings.  I would not have thought to double check my disk sharing settings otherwise.

• Can I use my Xbox 360 with my Pc official wheel?

  Hello

  I was just wondering wether I would be able to use my official wheel xbox 360 with my pc, I know you can use xbox 360 controllers once you buy the adapter, but the adapter would work with my wheel?

  Thank you

  Hi ScottHarrison,

  Have you seen this link at the moment?

  http://www.Microsoft.com/games/en-us/hardware/controllers/pages/XboxWirelessGamingReceiverforWindows.aspx

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Xbox 360 Wireless Gaming Receiver - this is going to work with a remote xbox?

  Hi, I have the xbox 360 Wireless gaming receiver and I am trying to get a remote control for it.  Does the xbox 360 remote sync to the xbox or is it just regular IR

  Thanks for your help

  The xbox 360 remote control Infra-red, the 360 has an IR receiver port.

  The wireless gaming receiver is radio only, so will not pick up the remote control. There isn't AFAIK a 'remote control' for the wireless receiver such that it has a validity of the Protocol only for xbox 360 Wireless devices, although there are a lot of 3rd inventive party accessories available, there might be something. You can of course use one of these wireless devices as a remote for other applications with the right software (xpadder, beam, etc.).

  The Xbox 360 remote control can be used with a PC using an IR receiver, but it's not plug-and-play, here is a solution: http://www.redmondpie.com/using-xbox-360-ir-remote-with-vista-media-center/

  Other that that, there are a multitude of remotes for PC, IR and wireless (including bluetooth). Bluetooth is the option if you want to keep your number of receivers plugged into your pc to a minimum, however, IR is still much better for the battery of remote controls (why it is still used despite the benefits of the radio).

• How can I connect my xbox 360 controller to my iMac (last updated: mountain lion)? I bought star wars force unleashed on AppStore and it said only 360 controller can be used then, how can I connect to my mac? I have the wire on the load control

  I bought star wars power of the force on the apple app store. It says that i can use the controller to xbox 360 to play other than keyboards. now how to connect the controller 360 for mac? I have the charger cable to connect to the controller that has a usb key that I have connected to my iMac (desktop), but this isn't like the ps3 where he worked. Help, please! I have the latest version of the update of the iMac, which I believe is the mountain lion

  Not sure if this will help. Here and all over the web search will show that you mixed results.

  Try this download. I have a new Macbook Pro El Capitan 10.11.3 running. Just installed this to use my old Xbox 360 wired controllers USB to play Lego games. Despite the mixed reviews, this seems to have worked perfectly and actually gives you an ability to customize the controller.

  Al https://github.com/360Controller/360Controller/releases/tag/v0.15_beta5_unoffici

  NOTES:

  (1) it is Beta version 5; newer than all the other versions of this utility I saw reviewed about the feature. You may need a different version because your version of iOS, but I'm not an expert here.

  (2) once installed and the computer restarts, you will find the utility as a new icon in the system preferences (the gear in your dock icon, probably), not applications, utilities, etc.

• I can't use the Xbox 360 controller for condemned Criminal Origins

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I can't using a wired Xbox 360 controller as a joystick for the origins of felons game.
  • I looked online for a solution and close using joy to key. I could map each button and it was totally functional, but I was still unable to turn or to consider, if I could walk because I had mapped the left analog stick for market controls. I tried to change the settings for the joystick in the game, but they are not what I noticed at all.
  • the game recognize at least some controller, when the mapping in the keyboard settings, it recognizes the buttons, but not the triggers or the analog sticks.
  • I tried to update my drivers, I tried different usbs and always made sure that it was connected, all of the simple things.
  • I really want to play this game, and I'll be really disappointed if I have to use the keyboard and the mouse to do it, I'm not comfortable at all to aid in a fps game.

  Thanks for your help!

  but in fact I ended up understanding.

  apparently my controller was defaulting to an old driver or the wrong driver or something, so the game incorrectly recognizes it. at least partially wrong.

  the old, updated, deleted totally worked! for the most part, had yet to use joy to key to map triggers, and the d - pad is recognized as a button, instead of four separate.

• Use of XBOX 360 with PC controller

  How to set up a wired XBOX 360 controller or wireless for use with my PC games?  Are there restrictions?  I have the wireless adapter, but neither my wired or wireless controller seems to work on my PC, even if the material appears to be detected and declared available for use by my computer.

  Hi O.D.I.E.,

  I suggest you follow all the steps of the below Microsoft article and controller XBOX 360 together again on the rise.

  How to connect your Xbox 360 wired controller to a computer running Windows
  http://support.Microsoft.com/kb/906347/en-us

  If this does not work, contact Xbox for additional support from the same link.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Controller XBOX 360, used for mice

  OK... I just bought the game of the year Elderscrolls oblivion eddition and I bought a XBOX 360 controller to use considering how it is compatible with windows 7... Everything works great with one exception. The right analog stick on the controller is supposed to control the movements of camera but it does nothing, so I have to resort using the mouse which can be quite the pain. How can I set the analog stick right to act like the mouse to control the camera? Its very important and any help will be greatly appreciated.

  I think he was looking for the Oblivion controller settings.

  Try this site and scroll down to Game Pad feature
  http://www.Elderscrolls.com/downloads/updates_patchnotes6.htm

  Good luck!

• can I use my controller for wireless xbox 360 in fsx and if I can do what I do

  Hi I just installed fsx, and he says that I can use my xbox controller.

  How can I install my control of xbox 360 Wireless for my computer windows vista laptop?

  Hello

  I suggest you to connect the XBOX 360 controller to the PC and it will automatically get detected by FSX.

  To connect the XBOX 360 PC controller refer to the link below.

  http://www.Microsoft.com/NZ/DigitalLife/gaming/how_to_connect_an_XBOX_360_controller_for_windows_to_a_computer.mspx

• Games PC crash when you use the XBOX 360 controller?

  I have a compatible (no name) Xbox controller and it plays the Games very well but one of the buttons is broken, so I bought an official Xbox 360 controller for windows (using Win7 64 bit)
  the circle on the controller flashes constantly and whenever I start a game, it crashes,
  on NFS shift 2 it crashes at the start of a race every time.
  Ive got the latest drivers but still no luck

  I got it to work! Let your controller xbox 360 pluged and try this: If you have installed MotionJoy uninstall it! Go to device under something Manager as common joystick right click on properties, then click on uninstall and if prompt to uninstall the software, or remove the software click Yes. Peek under devices of human interface in right to do this, click on each of them you see peripheral HID-compliant and USB input device and click on uninstall the device for EACH Manager. Yes, your keyboard mouse will not work for a few seconds but this will ensure that you uninstall it * controller device drivers. After you have uninstalled these elements unplug your Xbox 360 controller now to get the latest drivers MS site for controller xbox 360 and install the drivers FIRST before connecting the Controller and make sure you click on finish on the program before plugging it in. (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows) believe me it should work I have 1 flashing continuous on my gamepad not like before where he was stuck. more I tested it on Fifa12 where I was crashing before so far played 2 games no problem :)

• I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  I bought a Xbox 360 for Windows gamepad, as well as a Play and Charge kit. If I want the charge with this kit controller, can I use a USB/power Apple to the charge controller plug?

  Hi Arvin,

  The question you posted would be better suited in the Xbox Forums. I would recommend posting your query in the Xbox Forums.

   

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

  Hope this information helps.

• Hi, when I connect to my Wired XBOX 360 controller to my PC the guide button flashes once and there is no answer. I use 32 bit Windows 7, Dual core 2 GB Ram DDR2

  Hi, when I connect to my Wired XBOX 360 controller to my PC the guide button flashes once and there is no answer. I use 32 bit Windows 7, Dual core 2 GB Ram DDR2

  Hi JamBoard,

  It is possible, that you need to install the drivers for the controller.  You can get them from here:

  http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows#support

  However, if it's not too hot, it could be a real hardware problem.

  Thank you!

• I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  I want to use my controller xbox 360, but windows 8 is not under operating systems, what should I do?

  Plug it in and let the auto drivers install.  I use mine all the time.