USRP synchronization for transmission using MIMO cable

Similar Questions

• Unable to connect by Satellite A100 for TV using a cable SCART

  Hello
  Please help me! I'm trying to connect my laptop Toshiba Satellite A 100; Video card from NVIDIA 7600 with my LCD TV Panasonic Viera.
  When I connect it with the cable SCART there is no signal on the TV.

  Maybe my video drivers are not real, but when I download again on the Internet it displays the error message?

  Before that, I was with the old CRT TV-Goldstar I there is no problems.
  Now, I can't change my resolution he remains on 800 x 600 for the second screen and does not find it.

  I hope someone will give me useful advice!

  First check the TV settings in the properties of the nVidia graphics card!
  I put t remember where you go exactly and what settings are important, but you should definitely check out everything in the graphic properties-> advanced.

  In addition, the user manual describes exactly how to connect a TV to the laptop.
  To my knowledge, you must use an s-video cable.

• "MIMO cable link does not lock the time limit" error in USRP 2922

  Hello

  I short tutorial teacher Heath experiment, specifically the laboratory 2.1 on USRP 2922 and I came through this error:
  "niUSRP Initiate.viMIMO link cable lock not in the time allotted." with the error code "-1074118624".» I do not understand the error and do not know what to do note that I do not use anything related to MIMO and I don't have a MIMO cable in the first place.

  Can someone help me with this? Thank you!

  Hello

  A possible case where you could get the error «link cable MIMO does not lock...» "If you set the frequency source of reference in mode"Mimo"and that they were not really using cables of mimo or configuration.

• my wireless was printer was working fine until what I used it to scan - and needed to use a cable for s

  Hi, can anyone help? My wireless was printer was working fine until what I used it to scan - and needed to use a cable to do so. I can no longer print wireless, Iv'e disconnected from the PC to the printer as cable seemed reasonable. What should I do? Thanks in advance

  What printer you are using?

• try to migrate data from a macbook pro to another using thunderbolt cable.  Cable is not recognized, why?

  replace a 3 years old macbook pro with a new - try to migrate data using thunderbolt cable.  When the cable is plugged into laptops, its not known how to fix this?

  The two Macs have a Thunderbolt port?  The old Mac may have a mini displayport that is used for video only, but accepts a Thunderbolt since video Jack mini displayport is a subset of Thunderbolt.

  In addition, you use a bolt of lightning and not a cable mini displayport? They look alike at first sight, but Thunderbolt should have an icon of lightning on each card.

  Also, if you look in System profiler

  OS X: about system information and System Profiler - Apple Support

  under lightning shows as being connected?

• Where can I download silverlight for windows using a mac?

  I really want MS to treat people like they're idiots.   :-(  One of the reasons why I have avoid them more.

  And I avoid using a software which provides support through forums, forums are a waste my time!  Options would be nice.

  I have a Mac, I know.  I have a Windows computer up-to-date with Silverlight, I know.

  As much as I can get on their Web site, I can't find a way to download the latest version of Silverlight for Windows using computers.

  Where can I download the latest version of Silverlight windows, preferably using a Mac because it is my main computer.  I rarely use Windows personally more.

  Hi, Marilyn.

  Thanks for the suggestion, but not necessary.  I had the problem solved, as I've mentioned in my previous post.

  Also noted there, I do not use MS Forums except as a last resort.  And sometimes I just give up instead of using the forums.

  Why?

  1. MS Server response time is slow cussedly too often.
  2. I have to look for answers, rather than simply through a condensed list, as you can with a newsgroup reader.

     The problem with research is, if I use the word 'bucket' and posters use the word 'bucket', in the subject line, I'll never find it.  But if I can easily scroll the list quickly, and I see the word 'bucket', I can't stop and open this message.

  3. The same messages show 2-3 times in the threaded view.
  4. Forums of waste server and user of the resources and bandwidth transmission system.  You always download the same Visual information such as graphics and ads over and over and over ad nauseam.
  5. Forums are for people who do not know how to use focus groups and companies like MS used to provide good documentation with their products.
  6. Connection time can take forever.

  All the above comments, to some extent, apply to all the forums that I have all been forced to use.

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Create a vSwitch for iSCSI using 10 GB HBA

  Hi all.

  Its been a while that I have installed a new system. I have a basic configuration for the tests, single server with a 10 GB HBA (HP 4000 G2 SFP +) connected directly to a SAN using a cable CAR.

  My question is should I see the HBA listed as material and I would be able to add this to the iscsi switch, that I created? I don't see my NIC 1 GB cards at the moment. So either I'm away or my card is not compatible.

  If it's iSCSI it will appear as a network adapter. If it does not appear as a NETWORK card you should see if HP has a driver for the exact model of card network.

• Sun Java System Identity Synchronization for Windows and Console Server

  I came in an environment with ODSEE 11 g installed using Identity Synchronization for Windows 6.0.
  
  The problem is that the person who has installed and the admin is not available any more. Thus, when you try to use the Sun Java System Server Console, instead of an icon next to synchronize identity for Windows, all I have is an empty square box. When I connected to the server, the program will download some files jar, isw2010.116.1139_en.jar and isw2010.116.1139.jar.
  
  I don't know how to get the icon next Identity Synchronization for Windows so I can actually view the settings.
  
  Any help would be appreciated and generous.

  user8262136 wrote:
  Exception in thread "Thread-4" java.lang.UnsatisfiedLinkError: C:\Program Files
  (x86)\Sun\MPS\lib\jss\jss4.dll: can't find dependent libraries)

  jss4.dll depends on NSPR libraries. Make sure that they are, or are in the path.

  You'll at least need a few additional ones that depend on these and the following. Make sure the directory it's in are in the path.

  libnspr4.dll
  libplc4.dll
  libplds4.dll

• PC specs for CS5 using "Non-Techy.

  My head is swimming with all the talk of tech on the best configuration to run Photoshop CS5.  I've read all the articles and know a lot of you technicians are in disagreement on certain specific points, but there are MANY of us there photographers who use photoshop for portrait retouching, creation of composite, picture banners, etc., and no 3D or video/games but rqmnts are ignorant about these details.  Of course, I have a suggestion on the purchase of a new PC for someone who does not know how to build them.  (I know how to add more RAM...!) ?

  I went to NewEgg and on the power of desktop search, see lots of choices that I don't know how to fill.  For example:

  1 CPU Type: according to me, dual core, that's what I need so I should choose Core 2 Duo; Core Duo or Pentium Dual-Core?  (maybe all the same?)

  2 CPU Speed: I think 3.2 GHz min claimed that I read.

  3. type GPU/VPU: help!  Too many choices.

  4 memory capacity: I think I'll settle on 8 GB initially so should I choose DDR, DDR2 or DDR3?

  5 disc HARD ability: I think I'll go 1 TB, but I read a suggestion of a 3 x 1 TB-where can I determine this? store us a lot of pictures (photography of the school).

  6. I know that I need a 2nd hard drive which I think is for a disc to work (this is a mistake I sometimes get on my current pc).  I like the suggestion of a 1 x 60 min GB SSD, so where do clarify this?  Should I buy separately and watch a YouTube video to see how to install?

  7. I read to have 3 hard drives, application/storage/scratch.  Do I really need all 3 for my use or 2 above would be good?  I use an external and online for backup storage so especially focused on what I have to do my job at the momemt.

  Maybe there is not a computer that I can buy, but maybe someone could recommend a basic model, and I'll find a YouTube to learn how to add the rest.

  Thanks a lot.  I appreciate of course someone who comes down here in the world of the ignorant and help me out.

  You are welcome and thank you in return.

  I am an engineer in technology career, but I tend to avoid the real nitty gritty gathering different parts, since there are companies like Dell, who are doing a darn good job with the design of the system.

  With the purchase and the 'reconfiguation' of a machine used/given to nine, you take system integration tasks yourself (compared to buying a new turnkey system), but he is nowhere near as involved as an accumulation of parts of system.  You take on the responsibility to replace/repair parts you buy if they have to go wrong, but many do not have their own guarantees (for example, new discs come with their own guarantees).

  To answer your questions...  Bascially you plug the drives SATA 0, 1, 2... Cables/connectors provided on the motherboard, plug the provided power cables, mount disks in their tasks and you're ready to go.  Things may become just a little delicate if the workstation does not come with all the plastic parts who are used to mount the drives in their spots and if you want to mount a 3rd internal you should put it where a second optical drive would go.  You can order these parts from Dell, but I made several corner brackets for small cubes of rigid packaging foam discs, which also has the added benefit of reduced vibration and noise.  Simply ensuring that most of the chassis in the car is open to the air for cooling.

  Once installed, there are BIOS menus in these precision workstations that you access by pressing a key during startup, and they can be used to configure the RAID array, which is not too difficult.  But while she can really improve performance, RAID is not strictly necessary.  If you have used, for example, only two drives (I have three), you can just configure them as C: and D:.  You don't want at least two letters of readers (physically separated readers) for better performance of Photoshop.  You, for example, your operating system and files programs, etc. on the C: drive, then you'd be free to use D: for data files and using Photoshop scratch.  With or without a RAID C: drive, Windows 7 just charge right on, no problem.

  Here is a picture of the inside of a Precision T5400 showing the locations of the car bays, which pivot on for the insertion of the disc.

  

  It is a RAID configuration screens...

  

  If you should get one of these machines T5400, I'll be happy to help you with the details of the installation, since I've been there myself.

  -Christmas

• What is reasonable memory for Firefox use?

  Title says it all-

  What is reasonable memory for Firefox use?

  The normal use, I am an average of 1.2 G or about memory (of 16 G total); is this normal? Don't not maxing out at all but I was wondering.

  How to define and measure the use of memory for Firefox? Activity monitor? I use Firefox to write this. In the activity monitor, I see Firefox to 347 MB and Firefox Web Content to 259 MB.

• When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

  Hello

  Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

  You can use either; There is no advantage to one or the other specific.

  (144276)

• which computer is best for home use, including reports and spreadsheets?

  I've been using 'other' computer for many years at work and at home, had an iPhone several years ago and at the insistence of my daughter to Apple computer, I explore the possibility of buying an Apple computer. I need to type reports and do worksheets as a Secretary for an organization. I used Microsoft Office Word and Excel and need something similar, but without all the bugs and viruses. My laptop crashed a few days ago and I lost all the data and applications. Instead of the tedious task of restore all applications, this seems to be the time of the Apple store. Any suggestions? Mac, iPad, or do you use?

  caytn,

  I suggest to start by looking at your budget.  Knowing how much you can spend on a machine will considerably reduce the options.

  I expect that the options will be one of the following:

  MOBILE NO:

  Mac Mini: $500-$2200

  iMac: $1100 - $2400

  PORTABLE:

  MacBook: $1300-$1600

  MacBookPro: $1300-$2700

  I, personally, do NOT recommend an iPad for professional use

• A Web site can store data for offline use without asking?

  In options, advanced, network, web content offline and the user data, I 'tell me when a website asks to store data for use in offline mode"checked

  And then in the box below that lists Web sites that are allowed to store data for offline use there is an entry "https://forecast.io".

  This site never asked me to store data offline, and I never did anything to him. The website showed there before, I removed it and now it's back.

  So, since I have the box checked to tell me when a site asks you, means that there is not just ask?

  Yes, a Web site can store data for offline use without asking and can do even if you have checked the option 'tell me when a website asks to store data for use in offline mode', because this option does not work correctly. See the bug: https://bugzilla.mozilla.org/show_bug.cgi?id=959985

  As far as I know, it does not mean that the site simply "did not", it's just that the option does not work (or maybe only works in the case where the data are larger than the pref in offline mode - apps.quota.warn?)

  The workaround given by cor - el above, must currently off - apps.allow_by_default set to false.

• Connect mini iPad iPhone 4 5 s using a cable

  I currently use the hotspot on my iPhone 5s so that my mini iPad 4 can connect to the internet while I'm out of the game Pokémon Go. I get a message on the iPad indicating "signal GPS not found." quite often. The battery on the iPad lasts longer then the iPhone while using the Pokémon Go app. Is it possible to connect the iPad to the iPhone using a cable and I hope that allowing the app on iPad to use the GPS signal on the iPhone without this stall?

  Simply: No.