Pavilion 15 n208tx: control HP recovery disk

Similar Questions

• HP Pavilion DV4 laptop 3000: lost recovery disk and crashed for laptop

  Hello

  I am from the region of Asia from the South (India) and my laptop broke down and unfortunately I lost my recovery disc.

  As you browse the site, concluded that the cell matching has not been listed. Please guide me to get a new recovery disk.

  Here are my coordinates for laptop and you kindly give details to collect the recovery drive to my nearest service center/order it online.

  Make the laptop: HP Pavilion DV4 laptop
  Product number: LQ389PA #ACJ

  Best,

  Dev

  Try this: http://h10025.www1.hp.com/ewfrf/wc/product?cc=in&dlc=en&lang=en&lc=en&product=5075348

  You are welcome

  Click on ACCEPT as SOLUTION to help others with the same problem *.

• Pavilion G71-343US: Purchase of recovery disks

  I have a 2009 G71-343us with a BAD HD... and the keyboard.  I replaced the keyboard, but I can't find the recovery disks.  I've been everywhere in the support site Hp and the best that I can understand, they do not support my device... My question: WHERE can I PURCHASE RECOVERY DISCS...?

  HP sells no recovery media for notebook computers beyond five years.

  Try a HP partner called Computersurgeons.com

  http://www.computersurgeons.com/

• Pavilion: Re-create a system recovery disk

  Can get a good deal on a 32 GB MicroSD card memory + SDHC adapter. Is this enough as a system recovery disk?

  JW0829 wrote:
  Can get a good deal on a 32 GB MicroSD card memory + SDHC adapter. Is this enough as a system recovery disk?

  It's sounds close but be sure to first try it and then it will tell you how much space you need the device you choose to recover to.

• Desktop HP pavilion s5-1540: using the recovery disk

  I have the recovery disc I made when I got this pc.

  Now, I need to use.  I started the pc with the disc, but nothing happened.

  Can I get advice on how to use the recovery disk?

  Note.  I'm not very computer savy.

  I sent my pc in for repair to a place of repair no HP (insurance).  They have installed a generic operating system but there is no program file.  I want my pc as it was when I got it.

  I can't get these disks to run.

  any help is much ajppreciated.

  Insert the recovery disk 1 in the drive, restart the PC, when you see the HP logo screen start to type F9 on the keyboard, this should load the Boot Manager, and then highlight (using up/down keys) internal CD-ROM drive cd/dvd and press ENTER, it will now boot from the recovery disc 1 and we hope to start the restore process.

  It is a long process not to disturb the tactile keys or pc, while he recovers, it will reboot several times on his own, you know when it is done when it asks you to set up the pc for first time use.

  Make sure that the recovery discs are clean before you start.

• Range of computers HP Pavilion 500: cannot make a recovery disk usb on my new hp desktop computer

  HI, I bought a Hp desktop computer yesterday in a store in Alberta.  Yesterday after I bought the computer told me the person in the store to do a recovery with a 32 GB USB disk.  So today, I tried several times to go to the app to create recovery disk provided with this hp desktop computer.  When the application starts it says please wait while a blue bar across a white bar.  So the next thing coming back, he says put your USB drive in and the box has a check in there to copy the recovery partition and it also says to ensure that your USB has 16 GB of storage to the partion.  Then under this window, the next wiich button is greyed or I can not click on this button.   The Cancel button witch. I can click.

  What I would like to now that's what I can do to fix this and make me a recovery drive because nobody gave me a recovery cd to go wth this computer.

  Thanks for your help is always appreciated.

  some details that might be useful:

  8.1 Windows 64-bit operating system

  Equip the USB key before you run the utility to create recovery media and try again.

  If the USB is not recognized as a removable disk, then it won't work. The fact that the next button is gray tells me that it is likely that you need to try a diferent of the flash player brand.

  There are a number of brands known not to work with the utility. Unfortunately, the most common Sandisk brand, is one of them.   Transcend flash brand work readers

• Pavilion g6-1319TX: I need recovery disks

  Hi, had problems with my laptop that works evil and all kinds of problems. I decided to re - install the software to the factory settings when I bought the laptop. I have a new set of recovery disks that I received from HP back then, and I had never used. I started the recovery and the first disk formatted the hard drive and installed the software, and then he asks disc number two. I loaded the second disc and the program on board for a short period, and then informed me that there is an error and the installation program has been cancelled by the program itself. I tried many times, but the same problem happen, now I don't have a working computer. I need software to recover my laptop, if you can please advise.

  Run material from BIOS diagnostics to confirm that everything is still OK.

  Try cleaning the DVD if it helps any:

  http://www.WikiHow.com/clean-a-DVD

  In case your recovery partitions is intact, repeatedly press the F11 key at startup to enter the Recovery Manager if it still works.

  If is possible the recovery disks you have are corrupted and you need to get new ones.

  If you live in the USA/Canada, call HP at this number 1-800-334-5144 and see if you can still get a set of recovery disks.  Otherwise the site worldwide: http://welcome.hp.com/country/w1/en/support.html

• HP pavilion s5133w: need to order recovery disks

  I'm asking for a friend who is not computer savy.  The computer has not been used for about 3 years and she forgot the password.  She did not have a password disk, and she had no recovery disc for the pc at the time of purchase.

  So, based on my research the only way is to reinstall windows.  But I need to buy a recovery disc for the pc.  I didn't was not sure if you buy company discs I know would work.  I have the serial number of the pc.

  Any help would be appreciated.

  Thank you.

  @trkbean, welcome to the forum.

  This is acompany that should be able to help.  HP is not the free disks.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Can not control Toshiba recovery disks

  Hello

  Wonder if anyone can help, does in my head.

  Been trying recovery disc Toshiba order for the last two days, without success, I can't past the billing page, I entered my details, including credit card details, press on confirm and I just get the same page, showing, without anything to show me what the problem is.

  If I use the pre-paid option I can complete the order, but with that, I do a bank transfer which will cost me, and I didn't do that.

  Any ideas on what could go wrong?

  Hello

  I guess there is something wrong with your credit card number, who knows
  I recommend contacting the support of Arvato.
  Choose your country and your language on the pre-order disk recovery page and click on print (can be found at the bottom of the page)

  There you should find the details of area and contact Support.

• Recovery disk does not work now I have installed a new hard drive.

  I replaced my hard drive on my laptop HP - computer pavilion dv7 notebook. My recovery disks do not seem to work now, I get to 62% completion and then the error message "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. "Error code: 0xe0ef000e" do I need to buy a new HP recovery discs? Thanks, Nick

  Hi, Nick:

  Unfortunately, I don't have any experience in troubleshooting these special software installations.

  We should expect to download and install.

  If they are not, I have no tricks up my sleeve for you to try.

  I recommend starting a new thread describing your questions with this software and hope that someone else in the support forum can help you with these items.

  See you soon,.

  Paul

• Cannot control the recovery for my Pavilion 17-e019dx disk

  I accidentally deleted my given factory windows during installation of UBUNTU... Now I have installed 8.1 Windows 64-bit again, but it is not given by HP and the previous software... But I really need them :/

  I also deleted my recovery partition

  I tried to order recovery disks, but they aren't taking orders and telling me to order after a while, but nothing has worked...

  Can someone tell me how to get my recovery disks? HP or other sites? :/

  If you create your HP recovery media when you first set up your computer, please see DVD - recovery of Windows 8 64 b Kit or contact HP official in your country / region, via the Portal Support HP's worldwide, to see if the HP recovery support is available for the computer. Software may not be covered by warranty, and there may be fees for the HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP Pavilion 15 laptop: want to buy the to my computer HP PAVILION 15 LAPTOP recovery disk

  My laptop has the stoppage of work yesterday after using the recovery disk created from my Hp laptop which gives the reasons below.
  Failure of the control of BurnBoot of P2PP
  Possible causes: -.
  1.Yello - bang was held at the device
  2. some failed installation in silent mode
  3 Found failed to PININST_BBV
  4 Found failed to PININST_BBV2
  5 found memory dump file.
  Suggestion: -.
  BB 1.checking - REGDEV. The pilot NEWSPAPER
  2.cheking - BB Apps. Application log
  3. check MEMDUMP_BBV. Journal of memory dump files.
  Note {for ODM}: -.
  If you know which component failed in the process of prenistall after checking above files please OTS it to the owner of the component.
  Furthermore, suggestions for contact TWN PDC NB-PreinPM or create PIN-Log and OTS with OTS category Image.
  [Checking the register device]
  Result-failed
  Device failed #0: -.
  Description:-Bluetooth controller
  PNP device ID:-PCI\VEN_FF42 & DEV_8650 & SUBSYS_00000000 & REV_00\4 & E572C4B & 0 & 01E2

  Hi @anupom,

  Welcome to the HP Forums!

  If I understand your messages that you encounter a problem with your HP Pavilion Notebook of 15 and problems related to lack of CD recovery.  Here is something that might help.

  Are there problems with your yellow exclamation Device Manager showing in it?

  Did you change hardware on the laptop?

  Note Remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Please get back to me how that happens.

  Click the thumbs below to thank me for my efforts!

  Thank you.

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

• HP Pavilion 400-434 Office: intelligent control of hard disk: failure

  Hello

  It all started when the computer would go blank right after startup, the HP logo would come upward, then 'auto repair preparation", more... Just empty. After reading the forums online, I did all the possible troubleshooting steps and at the end I did the SMART test... the result was:

  Verification of the processor: past

  Intelligent control of hard disk: failure

  Failure ID: RGD7MK-7HV7RC-9XJ16K-60BB03

  After obtaining these results, when I turn on the computer, it gives me a blue screen saying: drive SMART 1 error (301) and told me to test once again, that I did and got the same result as above.

  Here is some info from the computer:

  Model: HP Pavilion slimline 400-434

  Processor type: pentium (R) of the Intel (R) J2900 @2. 41 GHz

  Thanks for your help!

  Hi there @Brugalgirl

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer does not start successfully, and you found a Smart Drive 301 error code. I'm happy to help you with this.

  I checked the ID of the failure, you've posted and verifies that the error. Unfortunately, this means that your hard drive needs to be replaced.  In view of the fact that the system does not boot, it is likely that the hard drive is completely unreadable, but depending on what you have on this subject, it may be worth your while to check with a local computer service shop and see if they can help to recover data from your hard drive.

  If your system is relatively new and may be covered by the warranty, or if you wish to fix with HP for the guarantee system, you can call in hotline to make these arrangements. In this case, please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Otherwise you can look at a replacement hard drive yourself. If you have a set of recovery media, then you already have a factory image HP, which allows you to put in place a new hard drive with your original operating system. If is no longer, you have a set or did not have a set of recovery media, so you can see if there are not yet available for your model.

  HP computers - get HP recovery disks or HP USB recovery disc

  Let me know if you need help most. If it solves your problem, please mark this message as a solution.

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596