V.10 CUCM Migration to BE5K BE6K
Hi all
We currently have CUCM BE5K and we are moving towards BE6K v10. Currently, the version of the call of the Manager's 6.1.5.11900 - 13.
If you wish to migrate, can I follow the steps below:
- Firstly we can installed the same version of CUCM 6.1.5.11900 - 13. in Server UCS, take backup of existing cucm and restore in new installed CUCM.
- If we restored the backup on the new CUCM, then the procedure of migration to CUCM v.10
kindly let me know the procedure is correct, or any document/link for migration... It would be helpful
Thank you...
NO, all the foregoing 10.X is virtual only.
5K can go as 9.X and you can check the HW compatibility on the documentation online, easy to find on cisco.com, or by searching the SCC.
And the name is Jaime.
If you want to go to 10, you need to go to 9.x, export information on the use of the MTD, import on MacOS9.x ESXi, then move on to 10. Have you reviewed the documentation of 5 to 6K?
Tags: Cisco Support
Similar Questions
-
Rehost licenses of ELM of connection of the unit to the server CUCM PLM
Hi all
I just finished a CUCM migration / MCS 8.0.3 upgrade to UCS 10.5.1 using PCD. I will now upgrade my 9.1.2 Server stand-alone connection of the unit to the 10.5.1 version tomorrow night. My question is about licensing. When I upgraded version 9.1.2 connection unit I decided to re co ELM since my CUCM cluster was still on version 8.0. Now that I have improved my CUCM cluster, I have two license servers - PLM for Call Manager and ELM for the connection of the unit. I was advised to move the licenses of connection of the unit to PLM, but I don't know how to do it. I have already contacted Cisco licenses and they tell me that everything is ready to go, but they have not told me HOW to do it (I know they are probably deluged with requests).
Can someone point me to a link or describe briefly the process please?
Thanks in advance!
Lisa
You probably didn't clearly explain what you wanted to do, he will be re - host licenses of a PLM to one another as before PLM with the MAC addresses of license.
-
External access to CUCM 10.5 CDRs
Hello
4.1 CCM 10.5 CUCM migration is now in the process. We have the task of verifying the COR on CUCM 10.5 every 10 minutes, get recent calls list and save it to external DB. On CCM 4.1 to get the necessary data from MSSQL weren't a problem. No idea how to do it on CUCM 10.5? It is possbile to get direct access to the DB? Perhaps, there is a mechanism of export of CUCM CDRs?
You can have all the flat files CDR, transferred to the SFTP server. From there, you can query to external db.
For more details, see link below
https://supportforums.Cisco.com/document/55821/troubleshooting-CDR
https://supportforums.Cisco.com/document/53056/understanding-CDR-call-de...
HTH,
Kind regards
Mohammed Noor
-
DX650 - just CUCM for video calling?
We have 10 CUCM, running on a BE6K. We ordered only some video settings (DX650).
Will be one person to the other working video call for users on our cluster CUCM? I know that external calls to Cisco TelePresence Server/Cisco TelePresence driver/highway. But I guess that for phone-to-phone internal video we don't need what it is?
And CUWL standard will be enough?
Thank you, Bill
Point to point call will work without any problem. You may need to have improved license because I believe that it is regarded as a telepresence device.
-
Cisco BE6k and VCS Center/periphery
Hi all
There is a new Be6k high density in the test environment.
However, we have no clear idea about the VCS Core/edge with the CUCM deployment in the BE6k.
- We install the VCS core and edge on the same server BE6k? After that, the edge of the VCS awarded with a DMZ ip address? Or install the other edge of VCS of the device?
- What the configuration between CUCM and VCS? Because I can not any related document of the Cisco.com.
Best regards
Ben Lai
1 both work, you just need to make sure good design and configure the underlying network and ports that connect each VM
2 MANY West information on this
http://www.Cisco.com/c/en/us/support/unified-communications/Telepresence...
-
New UCS-C210 problem with video monitor output
Hi all
We just bought a new Cisco UCS C210 M2 product for our CUCM migration to Virtual Machines. We plugged a HP monitor and a USB keyboard to start work with the UCS. Then we plugged the server to the power supply and turn on the server, the fan worked properly for his initial shot. However, I could not see the monitor up and I can't see if it boots correctly. We waited and notice that the keyboard seems to work as you can see the num and lock the scroll works.
I unplugged the monitor of the connection of the console before the use of the foxconn connector that came with it and plugged into the DB15 port on the back. Same result the monitor does not display anything.
So I went on the second UCS server using the same keyboard and mouse, everything works.
Any who know this problem of the screen does not? If so, please share how to fix it.
Otherwise, our conclusion would be that Cisco sent us a faulty hardware or it has become defective during the transport.
Thank you best regards &,.
Ramon
OK fans turn upwards and then downwards with the lights on the front would indicate to me that the server itself is ok and boot up normally. The fact that you have used this monitor UCS one another in the same way seems to indicate that the problem is probably with this server and a video on the issue. I suggest to open a TAC case and include these steps you have taken. If you can, try reinstalling all your memory and boot up the server again.
I hope this helps.
Sent by Cisco Support technique iPhone App
-
How to get around the installation remotely on CE8.2 Wizard
I play a VCS CUCM migration or as part of the process, I factory reset of all endpoints and upgrade points to CE8.2.1.
My problem is that even when I have carried out all the steps and have the taped CUCM end point, the first time Installation Wizard always appears on the device and I can't find a way around it without being physically present on the device (which is not an option that most of the units is off-site).
Is there an option to web interface or the command to ignore the wizard?
Using the web interface, try 'RunStartupWizard' in the Setup > Setup > experimental, which is the only configuration/command I can find relating to the Startup Wizard. If it doesn't work, maybe try to restart the end point after configure you it to CUCM.
-
BE5k tar BE6k Migration file fails
Hi we are upgraded to a CUCMBE5k to 6 k (CUCM 9.1.2)
Our existing server is on a HP MSC server and we bought the Cisco UCS C220 server. We follow the guide that describes the creation of the server then the import/export the tar files from the old server to the new CUCM below. Because it is on a new server that I am raising a new at the same time then I'll cut above.
When I run the import, it fails. Attached is the work schedular failier. The log files have some info however, how I should handle this info, if I can. Has anyone experience this problem with the default TAR files?
Thank you
Mike
There is no path of migration for CUCM out of a BE5k. You must build the new CUCM cluster from scratch. If you are patient, you can use BAT Import/Export to carry in most parts of the data; However, it will require a lot of massage in Excel, the columns will be different for your old version export and import on 9.1 2. Note that you can move the mailboxes CXN using COBRAS , but you must be on CXN 7.x or newer.
If you have installed Cisco Unified Communications Manager Business Edition 5000 on an MCS-7828 server, and you decide that you need to migrate to separate Cisco Unified Communications Manager and Cisco Unity Connection environments for increased scalability and capacity, you can reuse that MCS-7828 server to run Cisco Unified Communications Manager in a MCS-7825 cluster. Although you can reuse the server, you must reenter your data on the server manually. You must also obtain another server to run Cisco Unity Connection.
http://www.Cisco.com/en/us/docs/voice_ip_comm/cucmbe/install/8_6_1/install/cmins861.html#wp795012
Please remember useful frequency responses and identify useful or correct answers.
-
CUCM upgrade failed - migration 8.6 SU4 (2A) to 10.5 (2) SU1
Hello friends,
I'm trying to migrate SU4 Cucm 8.6 (2A) to 10.5 (2) SU1.
I did like the exception pre-upgrade tasks.
Changing vNIC, vCPU and taste-> rdht6 - 64 bit + resizing disks.
upgrade iso file loaded successfully.
Shortly after that the upgrade of cooling process in installation of position on the part of the installation of database component the process stopped at the 83 percent and performs reset.
That said the logs on the upgrade?
If he fails to step of the DB, it's usually something related to the info that is in the DB causing problems, but you must look at the newspapers.
And FYI, migrate means you either with PCD or move to a new piece of HW, is that what you do? If this isn't the case, then you are just the upgrade.
-
Unity connection 8.6 Migration to 11 with CUCM 8.0
Due to the right I'm going to intend a Migration of 8.6 connection unit to 11.0 of connection of the unit before I can improve CUCM. I am sure that the answer is Yes, but would there be problems running 11.0 of connection of the unit with CUCM 8.0.
Nothing fancy on the face of connection of the unit, no unified messaging ect.
New UC 11.0 should just registered the EPSC ports?
Thank you
Dan
Looks like you need at least version 8.5 for the SCCP and SIP integration CUCM to be supported. Check the compatibility of connection of the unit guide below.
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/connection/compatibil...
Combinations for Cisco and unity connection Unified Communications Manager of the supported Version
Table 22 Version combinations of supported for the connection of the unit and Cisco Unified Communications ManagerCisco Unity Connection Cisco Unified Communications Manager 8.5 and later 11.5 (1), 11.0 (1), 10.5 (2), 10.5 (1), 10.0 (1) 9.1 2, 9.1 (1), 9.0 (1), 8.6 (2), 8.6 (1), 8.5 (1)
SIP: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/compatibil...
-Terry
Please note all useful posts
-
Failed installation of CUCM IM and presence in be6k
Dear all,
There is a new facility in our lab on be6k, we have completed the installation of CUCM.
However, we cannot install the CUCM IM and presence in the be6k in the section "first node access configuration.
Please refer to the photo 1/2/3.
I created the password of security during installation of CUCM, however, it incorrect report in CUCM 1 M and the installation of presence.
Please comment on this issue.
Thank you very much.
Best regards
Benjamin Lai
Hello
-Can you confirm if IM & P server is added IM & P in CUCM under system > server?
-Is the NTP on accessible CUCM (open SSH > ntp utils status)?
Thank you
Shadi
-
Migration of TMS/VCS to CUCM
Hello
I was wondering if anyone can help please. I had a customer who uses VCS? TMS. Every endpoint registered in VCS - C.
I need migrat ethem to cucm 10.5.
What will be the best way to go, any suggestions will be appreciated.
Thakns
Of TMS directory are what kind you referring?
You can use TMS to a source of the telephone directory with the telepresence endpoints registered to CUCM, see pg 24 in the guide I linked to in my first answer.
-
Codec migration option multi-site since VCSC to CUCM system key
I have some general questions about this scenario
If a Codec has multi-site option key and entered a VCSC and is migrated to a CUCM system saved:
A.) multi-site option button will still be available for use on the Codec?
(B) can plan for TMS to it, and no need of a conductor based GST to serve the meeting?
You don't mention what version of endpoint and software, however, the endpoint can use the Multisite option even after it has migrated to CUCM, see sx20-cucm for reference.
Endpoint can also be using TMS planning conferences that are hosted on microcontroller embedded in endpoint as long that you have added in TMS, please refer to Guides Admin TMS on how to add endpoints CUCM managed in TMS.
-
Migrate CUCM, CUP and CUC VMS from the physical server Dell to a UCS
Hi all
We have 3 virtual machines from one physical server to Dell, we want to migrate those virtual machines from a server of the UCS.
Reference Dell physical server:
Model: PowerEdge M610
UCS: Version of UCS B200 M4 3.0 (2 c)
I was wondering if just copy all the files of the virtual machine to another server or there is another procedure to do this... and also we need new licenses of vmware?
Thank you very much!!
Kind regards!
ESXi licenses is up to you, you might have bought it so that the UCS, or buy directly from VMWare, but you need to license.
As for traffic, if you have vCenter, you can move the virtual machines using it (vMotion and/or Storage vMotion), or if not, you can perform a cold migration.
-
Migration of the 7 to 10.5 cucm
Hello
can I put cucm 7 to 10.5 directly using PCD?
Thank you
Hello
Yes, it is possible through PCD, make sure that you are running version 7.1.3 or 7.1.5 more details here
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/pcdadmin/10_5_1/...
HTH
Manish
Maybe you are looking for
-
How can I transfer balance iTunes of my son turn it back on for the family account? We have home sharing enabled. Can I transfer the balance or just buy him for me and content to share?
-
When I open firefox, a small user toolbar window is displayed at the top right, please help as I don't want that, I close it, but it takes a lot of time to close and he hings to the top a bit evrytime.
-
Can I use my 30 GB ipod to back up my photos?
MACBOOK PRO. (no further details known, the macbook is at home) I would like to get back to Snow Leopard of Mavericks, which I've tolerated so far. As the Mavericks does not support my LaCie little disk, I can't save my photos it so I would like to k
-
Change the number of items in the drop-down list box when running
I'm trying to change the number of items in one of my boxes of comobo. I have been through the help and this forum and have the values to within the drop-down list box change very well, but in a scenario, I want to go to three options for 2. And acco
-
No changes have been made to my computer. The cd player is sometimes recognized by windows XP maybe once a month. It is not playing audio files or music CD or movie videos either.