Migration of the 7 to 10.5 cucm
Hello
can I put cucm 7 to 10.5 directly using PCD?
Thank you
Hello
Yes, it is possible through PCD, make sure that you are running version 7.1.3 or 7.1.5 more details here
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/pcdadmin/10_5_1/...
HTH
Manish
Tags: Cisco Support
Similar Questions
-
Performing the migration of the first deployment of Collaboration CUCM and IM + P again
Hello
We used the server first deployment of Collaboration to create virtual machines, run the upgrades and migration of 9,02 10.5 CM and IM + P.
The migration was properly executed and CM and IM + P came as a cluster. We could save phones and test.
These servers are not in production.
Can run us the migration task to these servers to update their information?
No, you will need to remove these servers and run the migration all again.
-
I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.
Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.
If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
http://www.eightforums.com/ -
Migration via the time machine (old imac) new done imac numbers keynote pages and other programms disappear - what is my mistake?
You should be able to re-download your apps purchased on the Mac App Store.
-
Whenever I visit a new Web site I can wait for one of my first 'clicks' to open a new window with something like a Quibids announcement or a site with audio asking me to take a survey vaguely regarding the site I'm. There is also an ad in the migration of the lower-left corner of my screen that no amount of effort will get rid of. It didn't happen until last week when I downloaded the latest version of Firefox. My OS is Windows 7 on a Toshiba laptop. I connect with a hotspot from Verizon at home only. I scan all emails before downloading from the server PC of the population. I ran most of Windows and a couple of free virus programs did a full scan nothing helps. This problem does not exist when I navigate with Windows Explorer.
Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- TDSSKiller - AntiRootkit utility
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.
More information can be found in the article troubleshooting Firefox problems caused by malware .
This solve your problems? Please report to us!
-
How to validate Windows 7 after the migration of the HDD to the SSD on a laptop?
I upgraded my laptop with a Windows 7 OEM and windows has migrated to the new SSD.
Now he tells me that my Windows is not genuine, even after that I tried to activate my windows again.
It's the same machine and the same product key, just a different SSD.
What should I do?
Edit:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-*-*-*-PVDR2
Windows product key hash: U3gFvytkRKyyDaU2zHOKAPpt02w =
Windows product ID: 55041-011-2754703-86388
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150928 - 1507
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\en-US\sppc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\en-US\sppcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\en-US\slc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\en-US\slcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\en-US\sppuinotify.dll.mui[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\en-US\slui.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\en-US\sppcomapi.dll.mui[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\en-US\sppcommdlg.dll.mui[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\en-US\sppsvc.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\en-US\user32.dll.mui[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{D17ADED6-DDC8-40A5-8614-BD86AB6E2A88} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-BATH 55041-011-2754703-86388 6 S-1-5-21-2632269440-3034877388-763067593 LENOVO Lenovo IdeaPad Y580 LENOVO 5DCN36WW (V2.03) 20120503000000.000000 + 0001 09 0409 South Africa Standard Time(GMT+02:00) 1 AE4D3307018400FE 3 LENOVO OC-01 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-275470-03-7177-7601.0000-2582012
Installation ID: 000401724701945290880302308912032665376104509226579985
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PVDR2
License status: licensed
Remaining Windows rearm count: 3
Time to trust: 2015/12/17 16:04:12Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000000EF60
Event timestamp: 12:17:2015 15:26
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui--> HWID data
Current HWID of Hash: MgAAAAIAAQABAAIAAAABAAAAAwABAAEAln18JLIDdxYu8ky89I1Eo9DWVvus90a5lmM =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC LENOVO OC-01
FACP LENOVO OC-01
HPET LENOVO OC-01
BOOT LENOVO OC-01
MCFG LENOVO OC-01
UEFI LENOVO OC-01
ASF! LENOVO-CB-01
SLIC LENOVO OC-01
SSDT LENOVO OC-01
ASPT LENOVO OC-01
FPDT LENOVO OC-01
SSDT LENOVO OC-01
SSDT LENOVO OC-01
SSDT LENOVO OC-01According to your report, you use a Volume License customer who is only available for Volume License customers who deploy Windows 7 in bulk. Where did you got this license?
If you got through the employer, try to contact the volume license activation center to reactivate:
Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx -
Server of the UCS for retransmission of CUCM/UnityCnx/UCCX cause
I installed CUCM, UnityCnx and UCCX using VMware 4.1 on a server C210M UCS. I thought that the web interface has been a bit slower to change between menus than we have on a physical server, but do not think it was too bad. The real problem was found when I tried to upgrade the 3 comments UC systems. I see the continuous transmissions between the SFTP server and servers CUCM, UnityCnx and UCCX. It takes a long time to upgrade systems because of the broadcast. Anyone else see this issue?
Not specific broadcasts, no.. But they are just an indicator of another problem somewhere. Don't know what you have, never saw your environment, don't know you from Adam. But if you are running 4.1 with comments of the CPU, then you must be aware of the TCP LRO problem if you're not already. LRO is enabled by default and it is fixed now with a new patch, but in 4.1 before the hotfix will stop the vast "TCP" usually in the form of poor performace TCP as a general statement. This may cause retransmissions among many other things of course. Here is the link to turn off RSO on our guests and to restore back to normal TCP transmissions, will it affect you in the first place. You mention that you fixed LRO known issue before indicating a tcp problem, so I'll post it on the assumption that you specifically called a tcp-based protocol and no udp based.
Good luck, let me know if she takes care of it.
-
Migration of the AP in WCS: "Failure - role of Veryfying Radio."
Hello
while trying to convert autonomous APs (AIR-AP1121G-E-K9) mode LWAPP WCS always says 'Fail - role of Veryfying Radio'. Anyone know why this happens? The analysis of migration summary shows all criteria that green. Thank you.
In the wcs logs folder: / wcs/webnms/logs/it must be a direction for migration and the migration of this ap logs.
Could you post?
-
Change the attributes of Certificate SSL CUCM
How can I change the values of attributes that CUCM uses to create self-signed certificates or CSR? I am referring to the configured settings when CUCM is installed, as an organization, State, country, etc.
Thanks, Mike
http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/cli_ref/10_0_1/C...
-
In my windows7 when I migrated to the task force to the area, crashed by the firewall. And also it does not show in the services. In the firewall rules of incoming and outgoing traffic is missing.
Hello arjunpottekkad,
It is disheartening to know that have problems you with the firewall. As I understand it the incoming and outgoing traffic rules are missing from the firewall.
The question you posted would be better suited in the TechNet Forums . I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
Answer to us if you are having problems with the Windows Firewall or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
Hello guys,.
I'm in a phase of migration of OMF files and configured in my pfile file as follows:
* .db_create_file_dest = ' / DG_PRODUCTION'
* .db_create_online_log_dest_1 = ' / DG_PRODUCTION'
* .db_create_online_log_dest_2 = ' / FRA_PRODUCTION'
I used the following command:
RMAN > RUN {
SET NEWNAME FOR DATABASE AGAIN.
RESTORE THE DATABASE;
SWITCH DATAFILE;
RECOVER THE DATABASE;
}
RMAN > ALTER DATABASE OPEN RESETLOGS;
When you are finished, I consulted:
SQL > select name from v $ datafile;
NAME
-------------------------------------------------- ------------------------------
/DG_PRODUCTION/BD/datafile/o1_mf_system_c7ytmpqn_.dbf
/DG_PRODUCTION/BD/datafile/o1_mf_sysaux_c7ytmps5_.dbf
/DG_PRODUCTION/BD/datafile/o1_mf_undotbs1_c7yl7ltl_.dbf
So far, ok. !
SQL > select name from v $ controlfile;
NAME
-------------------------------------------------- ------------------------------
/ DG_PRODUCTION, BD, controlfile, o1_mf_c7yk6tol_. CTL
/ FRA_PRODUCTION, BD, controlfile, o1_mf_c7yk6x0n_. CTL
So far, ok!
but
SQL > select Member from v $ logfile;
MEMBERS
-------------------------------------------------- ------------------------------
/U05/BD/redo03.log
/U05/BD/redo02.log
/U05/BD/redo01.log
the migration of the log files have been migrated to DG_PRODUCTION and FRA_PRODUCTION that I specified in the pfile file?
the correct would be:
SQL > select Member from v $ logfile;
MEMBERS
-------------------------------------------------- ------------------------------
/DG_PRODUCTION/BD/onlinelog/redo03.log
/FRA_PRODUCTION/BD/onlinelog/redo02.log
??
SET NEWNAME applies only to the database files, log files redo not online.
You could issue commands ALTER DATABASE add LOGFILE without specifying the path to Oracle using the defined online_log_dest
(and then dropping the 'old')
Hemant K Collette
-
Planning of the TMS/head of Orchestra/CUCM
Hi guys,.
I'm usually confused as the scheduling how works between CUCM (CM) and Conductor (TC).
Current configuration:
CUCM: 10.5
Conductor: XC3.0.2 and I have lot of vTPS and MCU
TMS: 14.6.2
Ad-hoc and Renedevous works between CUCM and conductor, but I can't find any reference (blind) how intergrate CUCM and conductor.
I currently use the SIP Trunk for appointment to call Schdeuled numbers, it works but once I try to create and trunk identical sip rather by sending to the actual ip address of drivers instead of the virtual IP address, I get the below error:
Thank you guys.
Event = "a request arrives on an IP address that is not configured as an appointment or ad-hoc IP address".
Hello
You must add two IP address under location, ad hoc and other conference for appointment.
You must create a SIP Trunk of CUCM to address IP Rendezvous for video calling Rendezvous.
Create one SIP Trunk, the other pointing to the Ad-hoc IP address and then map it under the conference as resources of ad-hoc conference bridge.
Steps to follow:
Go to system > network interfaces > IP and then add two IP address in the same subnet as the IP address of a conductor.
Refer to page 35 of the document below.
http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...
Now go to go ├a Conference Setup > locations.
Map IP ad hoc for the Ad Hoc conference settings.
Same map IP address of appointment for the conference date settings.
See page 38 and 48 of the same document.
Note If you select the type of conference both under location then under the same place, you will get two ad-hoc and option address IP Rendezvous.
Kind regards
RACLOT
-
Migration of the customization of the form from one instance to another
Dear all,
I have a requirement to form customization in the form of orders. Form problems have already 99 customizations. After entering my new customization, I downloaded the ldt with the following commands:
FNDLOAD apps / $ Y DOWNLOAD password 0 $FND_TOP/patch/115/import/affrmcus.lct XX_OEXOEORD.ldt FND_FORM_CUSTOM_RULES form_name = OEXOEORD
I saw all the customizations are downloaed in the ldt, but when I try to download on another instance, it downloads only 5 / 100 customization. Download the command is:
FNDLOAD apps / $password 0 DOWNLOAD $FND_TOP/patch/115/import/affrmcus.lct XX_OEXOEORD.ldt - WARNING = YES UPLOAD_MODE = REPLACE CUSTOM_MODE = FORCE
Some random sequences (such as 9, 40, 80, 99 and 100) got downloaded.
I found an old thread associated with the same question:
Migration of the customization of the form of DEV TEST
We have applied this hotfix and checked that patch versions are up-to-date, but always after re - download issue persisted.
Thanks for your time to consider cela and really appreciate your help.
Thank you.
We have applied this hotfix and checked that patch versions are up-to-date, but always after re - download issue persisted.
In addition the patch that you already applied (Patch 9446215 ) Please make sure you have (Patch 9975835) mentioned in (FNDLOAD download does not download all the forms customization (Doc ID 1340217.1)) applied.
Thank you
Hussein
-
Has benefited from the migration of the Dollar Photo Club - connection of transfer does not
I took the offer to migrate when the site offered for transfer special, I knew more action needed to transfer my credits and now it says invalid connection and my connection still works on the dollar photo club although only to achieve a ticket system.
What is the problem here? A I miss out on this? I didn't know too much is required.
Hello
Your CPD credits were migrated to Adobe Stock and you have signed up for the promotion of 10 images per month.
Please sign in to stock.adobe.com using your Adobe ID to see your credits.
Thank you
Bev
-
D2k migration to the latest platform
Dear friends
Nice day
We have a challenge, I need your expert advice on the following points:
- So far, we are using Oracle 9i + D2k on Windows Server 2003 32-bit.
- Our database, forms, and States have been for the past 15 years and its been created with many controls according to the requirement of the company and works very well.
- Now we want to upgrade our server to windows 8 and all users have started using Windows 7 and 64-bit Windows 8.
- This application will not support for the 64-bit platform.
- I want to know what will be the migration of the existing process later. (Database, forms, and reports)
- What type of license is needed and about what will be the cost per user.
I will be grateful if I can get a clear suggestion that will help me to discuss with management and to plan accordingly.
best regards
Sandy
I'm a bit confused of your real environment. You have Forms 6i and Oracle 9i database?
If so, there is a change architecture of 6i to the current version of 11G. Cleint server-based forms 6i and you had a client installation of runtime-forms and actual execution of the forms was on the client. With 11G you need to a Weblogic Server where forms are executed on the client only the GUI runs as a java applet.
There are several built-in the forms 6i who no longer work (for example RUN_PRODUCT) and the other is no longer runs on the client, but on the application server (for example, HOST or OLE2).
Migration effort depends heavily on what features you are using in your application.
I suggest you take a look at the documentation here form of Oracle
Maybe you are looking for
-
my iPhone is in English, I once turned into french and I turned it in English but my Apple music is always in french, I want it in English, and I don't know how he turned back in it.
-
SecTaskLoadEntitlements no error = 22
Question Recently, I noticed that it appears a lot in my console and it happens often 3 times in a row. I'm new to Mac so I just wanted to know if this is normal or something went wrong in my Mac? I get it for all kinds of foods (see below) Console
-
My Windows XP GMA 3100 monitor goes black randomly and returns
Can someone help me get rid of this nuisance? The connection has no problem. Recently my screen becomes black and returns to normal and usually takes a lot of time to come back :/ I can move my mouse and type using the keyboard and do normal stuff as
-
First life of load and battery
So I played around a bit with my new Sansa Sport before full charge (settings and copy music). Now, my question is: how important is supported first before you do something with the device? What effect do not have a full charge first of all does the
-
RAC lsinventory OPATCH details
lsinventory-detail opatch shows meRAC system composed of several nodesLocal node = kusnwk01Remote node = kusnwd0uRemote node = kusnwd0vRemote node = kusnwk02But when I ask olsnodes s - t, I just:kusnwk01 Active pinnedkusnwk02 Active pinnedKindly let