Valid script does not work

Similar Questions

• Tiara startup script does not work when running file associated with

  Hello

  I have a startup script that works correctly with tiara itself, however when I open a file associated with tiara (tdms files) the startup script does not work.  Is it possible to ensure that the script runs without worrying?  Thanks for the help!

  Bala

  Hi Bala,

  Depending on your use case, I suggest you call the next VI, which comes with LabVIEW, after your purchase VI is the creation of the data file.  Just pass the data file path in the upper part of entry and your path to the VBScript file in less than entry.

  "C:\Program Files (x 86) \National Instruments\LabVIEW 2013\vi.lib\ExportToExcel\DIAdem report Assistant Start CSC.vi '.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Pavilion dv6 Validity Sensor does not work

  Hello..

  I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.

  Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works

  NEED HELP FAST

  Hello

  An option to try and install the latest version of SimplePass on the link below.

  http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Point culminating script does not work correctly

  I try to get the yellow filled rectangle to become visible behind the digital field when the numeric field is greater than "1". Can anyone help to see why my script does not work?

  https://Acrobat.com/#d=MJObRvA * l9tbFmrlHcMHUA

  Thank you

  -Don

  Hi Don,

  Your code does not work because because it is not actually executed. It's because of put you the code on the text box itself output event and this would require the user to move to that field and then leave the field and then run the code.

  I would recommend you change you form to add this code at the end of the code that runs your "addAttachment" button and then the form works as I expect.

  If (NumberOfAttachments.rawValue > 1) {}

  RectangleYellow.presence = "visible";

  }

  Hope this helps

  Malcolm

• Describe in SQL script does not work as you wish

  Hello
  
  Could you please help me determine why this script does not work.
  He said that the date is not set.
  
  Thanks in advance
  
  
  set p_day_sh = & data_sh
  set p_rowid_sh = & rowid_sh
  declare
  date of p_day_sh;
  p_rowid_sh varchar2 (18);
  Start
  
  If & p_day_sh is not null then
  trains t update
  Set t.offdate = to_date ('& p_day_sh ',' DD-MM-YYYY HH24:MI:SS')
  where t.rowid = '& p_rowid_sh';
  commit;
  end if;
  end;

  Hello

  In a command SET, if the string to the right of the = sign contains spaces, then it must be in quotes: in the case otherwise, only the first group of characters, white space will be affected.
  For example:

  define p_day_sh = &data_sh
  

  If & data_sh has this value:

  11-06-2009 06:25:09
  

  then the DEFINE command is

  define p_day_sh = 11-06-2009 06:25:09
  

  and & p_day_sh Gets the value of the part to the workspace:

  11-06-2009
  

  Either eliminate the space, Alex has proposed, or place the chain on the right side of the sign = in double - quote:

  define p_day_sh = "&data_sh"
  

  The double quotes will not change the meaning if & data_sh contains no white space.

• I can't get updates because of the validation process does not work, what can I do?

  I just formatted my hard drive and need to update my windows xp sp2. i cant get thru because of the genuine validation process that does not work. What can I do next to buy an apple product...

  Hello

  ·         What is the brand and model of the computer?

  ·         You get the error message?

  See this Microsoft KB article and check if it helps to resolve the issue.

  Windows Genuine Advantage does not validate a copy of Windows XP

  http://support.Microsoft.com/kb/916247

  See also:

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• Properties property example javascript in Adobe introduction to scripting does not work?

  I am completely new to scripting so I thought I would start with the guide Adobe pdf script.

  Page 18 it gives examples of 3 ways to use properties. The first 2 work very well, but the third simply ignores the part of the properties even when I directly copy paste it.

  It's the Tip:

  JS also provides a properties property, which allows you to set multiple values in a statement. You

  Place all of the values between the braces ({}). Within the braces, you use a colon (:)) to separate one)

  name of the property of its value and the pairs of value of property name/separation of property by using a comma (,).

  myDoc var = app.documents.add)

  myLayer var = myDoc.layers.add)

  myLayer.properties = {name: "my new layer", visible: false}

  So I know about Photoshop, you must use ArtLayers, but even in Illustrator it added another layer without renaming or the definition of visibility.

  Anyone has an idea why this does not work?

  That might work for Illustrator but it does not for Photoshop. I'll see if I can find this owner of documents and bring them to clean it. See my post above for links to the Photoshop documents. You can try to post your Illustrator questions or comments on the Illustrator scripts forum.

• Non-Null Validation step does not work with the hidden field?

  Hello
  
  I have a field that is a selection list.
  
  I have another field, which is also a selection list, but which is masked by the dynamic loading of the page Action (if the value of the first field is 'False').
  
  If the value of the 1st select list is 'True', the 2nd selection list appears and the user must select a value.
  
  I have created a "Item Not Null" Validation, because I need to force the users to select the value in the 2nd, select list.
  
  However, the Validation does not work! I guess it's because the 2nd selection list is hidden / display by dynamic action!
  
  The 2nd selection list is null to display the value 'NULL '.
  
  How can I solve it please?

  It has nothing to do with the dynamic Action.

  Try to delete "NULL" in the value of the Null display field. Just leave it blank.
  In this case, "specified element is NOT NULL" must be selected in the Validation.

• Java script not working not not in 1 pdf, but the same script does NOT work in other

  Dear Experts,

  I have a problem with java script.

  I created 2 PDF files with the same name under the names of form and shape.

  I wrote a javascript script and the script seems to work in a (Demand2.pdf) and DOES not work in others (exemple.pdf).

  The link for Demand2.pdf is
  https://Acrobat.com/#d=XIydWx1RIU4oNdTySHtHfg

  and the link for exemple.pdf is
  https://Acrobat.com/#d=sKPRs2dtDY57RSvMVtnh3w

  Can you please guide me on this.

  Thank you very much

  BookFans

  Hello

  The second file (exemple.pdf) is saved as Static. The script changes the visual appearance of the form (show and hide objects). This requires the file to save dynamic PDF format. This option is available for registration - as the dialog under the file name.

  

  Good luck

  Niall

• RMAN script does not work as a cron job, but works when explicitly executed

  Oracle 10 g 2 10.2.0.1, Oracle Enterprise Linux 4 U7.
  
  I've added a task to crontab of the oracle user who looks like the following:
  

  #ORACLE_HOME,ORACLE_SID and PATH are set in the user's profie
  TAG=`date|awk '{print $1"_"$2"_"$3}'| tr [:lower:] [:upper:]`
  
  echo "backup started on`date` "> /home/oracle/rman.log
  
  rman target / LOG='/home/oracle/rman_run.log' << EOF
  
  run{
  
  sql 'aler system switch logfile';
  backup full database tag='$TAG' include current controlfile;
  delete noprompt obsolete;
  
  }
  exit;
  EOF
  
  echo "rman finished, returned $? " >> /home/oracle/rman.log
  echo "Backup ended on `date` " >> /home/oracle/rman.log

  the tracks work as expected but the rman command never works the inside of cron, it always returns code 1, but if I call the script itself from the command line
  It works smoothly and the backup is performed.
  
  what I am doing wrong?

  what I am doing wrong?

  no no no ORACLE_HOME and ORACLE_SID is defined in script
  The script does not source in the script of environmental requirements

  env | Tri o /tmp/capture.env

  above indicates how deficient the script environment cron is really

• script does not work in firefox, but in IE, chrome, and safari

  I have a landing page with a script of web form, www.wholewoman.com/newpages/landing/helpforcystocele.html. the script does not appear in firefox. In addition, any of our videos (served from kaltura (CDN) show up in firefox.) nor is the registration of scripts for our drupal forum. the good news is that there are a lot of firefox users worldwide. the bad news is that none of them can opt in my list, watch my videos or register for my forum. Help!

  With a .html page, it is impossible to include the HTTP headers in the page. It should be in a file external to the page setup (unless you have a very unusual configuration on your server).

  On an Apache Server, the headers are sometimes defined in a file .htaccess at the root of your site. If you view the site in an FTP program or extension, make sure that hidden files are displayed.

• Python (a little) called from TS script does not work

  Call the script attached teststand .py does not (code 1 output)

  Execution directly - it works!

  Remove the line 'f = open ('debug2.txt', 'w')' - makes work also Teststand (exit code 0).

  I have another script more complex that also works when you run directly, but not teststand (code output 1).

  What is going on?

  import sys

  f = open ('debug2.txt', 'w')

  #Command line arguments are stored in the array argv list
  numArgs = len (sys.argv) - 1
  sum = 0

  #Iterate on each element and adds it to the sum
  for n in range (1, len (sys.argv)):
  Sum = sum + int (sys.argv [n])

  Print ("sum:", sum, "\n")

  It is in fact related to the "working directory". I've been faced with this before with teststand.

  When hard-code the path

  or modification

  "os.getcwd ()".

  TO

  "os.path.dirname (os.path.realpath(sys.argv[0])).

  My python scripts work also Teststand

• Validity Sensor does not work after a while

  Hello

  I have a HP DV5t with windows Vista running on it. The fingerprint sensor works very well for a while when the system is started, but then does not respond when I slide my finger on it.

  In addition, I go to services and see the service Validity Sensor has the status 'on the road', but then when I restart the sensor service starts to meet again for a short period of time before it returns to the dormant mode again.

  The time it takes to reach the stage where it stops responding is not consistent. Could you please help me identify the problem and fix it?

  just an info. . I tried recovering system, driver upgrades/restorations to date but in vain.

  Thanks a ton!

  Prashanth

  I think you're right and it comes down to a driver problem.
  There is probably a problem with the sensor when it shuts down or trying to 'wake up '.
  Whatever it is, you will probably have to wait just for the seller to come out with a patch.

  Are there settings in software sensor that have to do with power? I doubt it, but it's worth the trip.
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 8760w validity scanner does not work

  Hello, I have recently received a HP EliteBook 8760w from my college and cannot get the validity sensor (biometric scanner) to work.         I have Windows 7 Pro 64-bit, Intel core i5 2450 m CPU, 8 GB of RAM.

  I tried to install the drivers on HP website after the removal of the old disk; the only solution for my problem.

  I looked everywhere and everyone seems to have the same problem, but also no answer!

  I'm so angry because I've tried everything (to my knowledge) does not. Help, please. I'm pretty sure it came with Windows 7 so there may be a conflict, right? I'm all for trying something more, a fall and sending it to HP to poke and Paul while I have no PC for my college... Not worth it

  Also this thing has a scroll function integrated in the block or I use these arrows to scroll?

  I fixed it! At least for a 8760w here with Windows 7 Professional 64 bit-Just download these 3 files in order (all HP dl). Be sure to Remove DigitalPass that is to say-(Digital Persona) because the first download is not compatible with it for some reason any. Just RUN all the download do not save them. The last one is valid driver version 4.3.216.0

  To fix - 1st Download (HP Protect Tools ver. 6.0 or >) -http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071180&prodNameId=5071182&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-98249-1

  2nd(Embedded Security)- http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071180&prodNameId=5071182&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-96813-1

  3rd(Validity Driver)- http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071180&prodNameId=5071182&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-98255-1

• Script does not work on recent Macs

  Last year, I wrote a script to Illustrator (that something sticks in several files) for my colleague who works remotely. It has worked well.

  Recently, it has updated its Mac OS 10.8.5 (but always use Illustator CS5) and now the script does nothing - dialog boxes coming upwards, but instead of paste the content and save the new document, that he died. Since it is not in my office, it seems difficult to fix this problem.

  I want to make sure I'm not missing something big and easy, as OS 10.8 have broke something in the script. Although it seems unlikely to me, is - it possible that his Mac is the problem? Any thoughts?

  Here's the script:

  /* HOW TO USE
  SETUP: Have PDFs in one folder. Create a directory in that same folder called "saveloc"
  IN ILLUSTRATOR:
  1. Have the document open with the object you want pasted into each file selected
  2. GROUP selection
  3. Copy the selected item
  4. Run the script: File->Scripts->Other scripts (choose this script from selection window
  */
  
  // this var holds the selection that was copied
  var docSelection = app.activeDocument.selection;
  
  // if there is a selection made...
  if ( docSelection.length > 0 ) {
       // brings up dialog box which asks you to select folder of files to modify
       var fold = Folder.selectDialog( "Choose the folder CONTAINING the files you wish to modify", "~" );
       
       // all the files in the chosen folder will be stored in "files" array
       files = new Array;
       // looking only for PDFs in chosen folder
       fileType = "*.pdf"; 
       // fill array with PDFs
       files = fold.getFiles( fileType ); 
       
       // loop through all the chosen PDFs (that populate "files")
       for ( i=0; i < files.length; i++ ) {
       
            // opens each document in selected folder
            app.open(files[i]); 
            // add a new layer
            app.activeDocument.layers.add(); 
            // paste in what's in the clipboard
            app.paste(); 
            // assign the pasted stuff a name
            pasted = app.activeDocument.selection;                
       
            // position pasted stuff [x, y]
            pasted[0].position = [(19.215),(993.523)]; 
            // put the layer with the pasted item at the bottom of the layer stack
            app.activeDocument.activeLayer.zOrder(ZOrderMethod.SENDTOBACK);          
                      
            // stores name of the open doc
            var dsname = app.activeDocument.name
            // gives the new file name (same as old) a path to save location
            var saveName = new File (app.activeDocument.path + "/saveloc/" + dsname); 
            // some PDF saving options are set...
            saveOpts = new PDFSaveOptions(); 
            saveOpts.compatibility = PDFCompatibility.ACROBAT6;
            saveOpts.generateThumbnails = true;
            saveOpts.preserveEditability = false; // "false" keeps file size low
            // save it!
            app.activeDocument.saveAs( saveName, saveOpts );
            
            // close active doc     
            app.activeDocument.close();      
       };
  
  // ...if no selection is made, send up prompt
  } else {
       alert( "Select an object in this file, and then COPY it" );
  };
  

  I wonder if the problems you are having are back somehow to this topic or similar?

  http://forums.Adobe.com/message/4089226