Validation fails after installation

Similar Questions

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• Distribution with CVI 8.0.1 construction kit fails after installation of CVI 2010

  Update out of the newspaper:

  Adding files to install
  
  **************
  
  Internal error: A tool or the library returned an error. (Error code - 21)
  
  **************
  
  Error details:
  
  Error to the MDF API function: _MDFBuildDevPartMerger_Load
  
  returned nmdkLoadMergeModule code error 26152
  
  Final report of the error
  
  **************

  This happened earlier. CVI 7.1.1 and earlier versions than 8.0.1 (i.e. + 8.1.1) work.

  Any help would be appreciated.

  It turns out there are two different problems that arise in the CVI 8.0 distribution builds when you CVI 2009 or newer installed:

  1. Support for ActiveX container will not be included if you install the runtime in the application directory, or if you're not going under the grouping of LabWindows/CVI Run-Time Engine. In these cases, the ActiveX container merge module should be used and ICB 8.0 won't be able to find it.
  
  
  2. The merge module Instrument Driver Run-Time (instrsup.msm) and the Mesa merge module (NIMesaDLL.msm) cannot be moved to the application directory (which is the option on the Advanced tab that I mentioned in the previous post). This will result in the construction of distribution fails with the error you reported.

  To solve the first problem, I recommend the copy of C:\Program Files\Common Files\Merge Modules\ActiveX_Container.msm and rename the copy with a space instead of a line of underscore ("ActiveX Container.msm").

  The second question has no easy workaround. If acceptable for your use case, I would say either making the performance overall installation (by unchecking the option in the Advanced tab) or removing the CVI build runtime of your distribution. In the latter case, your application would be based on an already mounted overall CVI runtime engine.

  If any of those who will work for you, I can get you copies of pre-2009 instrsup.msm and NIMesaDLL.msm that you would have to manually exchange and out with versions in your common Files\Merge Modules directory whenever you have need to build this distribution in CVI 8.0.

  I am sorry for these questions. Let me know if you need these older modules.

  A. Mert

  National Instruments

• My MBP (early 2011) (8 GB of Ram) fails after installation of El Capitan 10.11.5

  Hi people,

  I just installed El Capitan and now my MBP works slowly / runs poorly. Safari is trolling and I seem to have a constant spinning wheel icon. I ran a check of the being - results are lower. Any help would be greatly appreciated. Thank you!

  Description of the problem:

  El Capitan (10.11.5) works slow / runs poorly on a MacBook Pro (early 2011) 8 GB of ram.

  EtreCheck version: 2.1.8 (121)

  Report generated on May 28, 2016 at 16:00:28 CEST

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  MacBook Pro (15 inch, early 2011) (data sheet)

  MacBook Pro - model: MacBookPro8, 2

  1 2.2 GHz Intel Core i7 CPU: 4 strands

  8 GB of RAM expandable

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Normal - Cycle count 1024

  Video information: ℹ️

  Intel HD Graphics 3000

  AMD Radeon HD 6750M - VRAM: 1024 MB

  Color LCD 1680 x 1050

  System software: ℹ️

  OS X 10.11.5 (15F34) - since the start time: 11:54:45

  Disc information: ℹ️

  TOSHIBA MK7559GSXF disk0: (750,16 GB)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 748,93 go-go (493,16 free)

  Encrypted AES - XTS unlocked conversion

  Storage of carrots: disk0s2 749.30 GB Online

  MATSHITADVD-R UJ - 8À8

  USB information: ℹ️

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Mac App Store and identified developers

  Demons of launch system problem: ℹ️

  [failure] com.apple.csrutil.report.plist [click for more information]

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]

  [failure] com.adobe.CS5ServiceManager.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  [loading] com.hp.messagecenter.launcher.plist [click to support]

  Launch of the demons: ℹ️

  [loading] com.adobe.ARMDC.Communicator.plist [click to support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.adobe.SwitchBoard.plist [click to support]

  [operation] com.bradfordnetworks.agent.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [no charge] com.gopro.stereomodestatus.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  Launch User Agents: ℹ️

  [loading] com.adobe.AAM.Updater - 1.0.plist [click to support]

  [loading] com.adobe.ARM. [...]. plist [click for support]

  [operation] com.amazon.music.plist [click to support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [click to support]

  [operation] com.spotify.webhelper.plist [click to support]

  Elements of user login: ℹ️

  Garmin Express Service application (/ Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Hidden Spotify Application (/ Applications/Spotify.app)

  Internet Plug-ins: ℹ️

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  OVSHelper: Version: 1.1 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  Unity Web Player: Version: UnityPlayer version 4.0.1f2 [click to support]

  AdobePDFViewerNPAPI: Version: 15.016.20041 - 10.11 SDK [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  DivXBrowserPlugin: Version: 2.2 [click for support]

  Silverlight: Version: 5.1.40728.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  SharePointBrowserPlugin: Version: 14.6.4 - 10.6 SDK [click for support]

  AdobePDFViewer: Version: 15.016.20041 - 10.11 SDK [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The internet user Plug-ins: ℹ️

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  npCtxWebRTCPlugin.0.8.846.95: Version: CtxWebRTCPlugin_x86_64 0.8.846 - 10.9 SDK [click for support]

  3rd party preference panes: ℹ️

  CineForm [click for support]

  DivX [click for support]

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  ROAR [click for support]

  Time Machine: ℹ️

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 748,93 GB disc used: GB 255,77

  Destinations:

  LaCie [Local]

  Total size: 870,18 GB

  Total number of backups: 64

  An older backup: 2014-02-11 18:22:59 + 0000

  Last backup: 2016-05-27 22:43:37 + 0000

  Size of backup drive: adequate

  Backup size GB 870,18 > (disc 255,77 GB X 3)

  By CPU process back to the top: ℹ️

  6% WindowServer

  1% systemstats

  0% cloudd

  0% AdobeReader

  0% SDM

  Top of the process of memory: ℹ️

  421 MB Safari

  AdobeReader 266 MB

  Com.apple.WebKit.WebContent 249 MB

  Xpccachectl 241 MB

  Spotify 155 MB

  Virtual memory information: ℹ️

  703 MB free RAM

  3.57 active GB of RAM

  2.87 GB RAM idle

  1.44 GB RAM cable

  4.30 GB Page-ins

  20 MB Page-outs

  Diagnostic information: ℹ️

  May 27, 2016, 21:47:42 self-test - spent

  26 May 2016, 14:52:28 /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 16-05-26-145228_ .crash [deleted]

  26 May 2016, 13:44:57 /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 16-05-26-134457_ .crash [deleted]

  26 May 2016, 13:36:37 /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 16-05-26-133637_ .crash [deleted]

  26 May 2016, 19:54:07 /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_20 16-05-26-195407_ .crash [deleted]

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Windows update fails after installation of windows update agent 7.6.7600.320

  After you install this update, windows updates is stuck on "check for updates". I reinstalled Windows 7 and the same thing happens again. I tried to uninstall the update, but it does not appear on the list of installed updates, even if it is considered successful in the history of the update. Actually, there are 26 updates successfully in history, including service pack 1, but only 9 in the list of installed updates. Anyone know what is happening here? DM.

  Windows 7 update problems? First read this.

  :)

• Windows 7 Genuine Validation failed after the update of the BIOS

  Machine - HP Pavilion g6-1010tu

  System - Windows 7 Home Basic 32-bit

  Recently I updated the system with the latest version of the BIOS, and suddenly to reastart OS is not genuine. I tried to contact Microsoft, and it did nothing, so I had to get off using Windows recovery.

  How update the BIOS without any change on the Windows license?

  It would be possible to use the product key on your windows sticker & activate by phone.

  It is probably not Microsoft but more likely to have a problem with the SLIC tables in the new BIOS that you are trying to install.

  Better stick with the BIOS of your work & approved as BIOS constantly updated with minor changes & for users without problems on BIOS current tends to be more difficult than to a value... BIOS flash only if really necessary because problems risk is quite high.

• Failed to start after installation ripple 0.9.1

  I'm new to Blackberry Webworks development (working on my first Playbook application).  I am currently installing the tools and SDKs.  When I try to start waving after installation I get a Windows error "Application failed to initialize...". »

  I'm on WinXP SP3.

  Any advice?

  Concerning

  DM

  Edit: My Windows XP SP3 is a vmware VM.  is this a problem?

  Happy that you said that it was VM.

  Can you try disabling the video / hardware acceleration in your VM player?  This is a feature that has caused problems with other developers.

• I am trying to install a scanner treated after installation failed previously and I get the message "Could not open key".

  Could not open key

  How can I give me access to a registry key?  I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...

  Click Start, type: regedit

  Click with the right button on regedit

  Click on run as administrator

  Make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Someone at - it problems experienced installation PS 14 items on their Mac?  I managed to download the program after the purchase, but he continues to fail during installation.

  Someone at - it problems experienced installation PS 14 items on their Mac?  I managed to download the program after the purchase, but he continues to fail during installation.

  Frustrating.  I spent hours with 4-5 customer representatives Adobe tries to 'fix' my problem.  Finally, I just ask for a refund.  I was told 5 to 7 days until the refund appears on my cc.  I was considering buying the disc, but with your comment, I think I'll look for something else.

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• error after installation again: CPU0:1024) VMNIX: validation log &lt; 0 &gt; i/o Error.

  Hello

  I have just setup the new server ESX 3.5 U4 local storage only, I did the standard method after installation of complete starting the server with the following error:

  CPU0:1024) VMNIX: & lt; 0 & gt; validation log IO error.

  It starts and begins to ping, I have a connected remote console because I can't access it or via PUTTY or Vic when I press f1 to log I get this:

  "connect servername: EXT3-fs error (device cciss (104,6)) in start_transaction.

  Interrupted the newspaper. "

  I think it is clearly pointing to a problem of local storage, so I guess I can get a new set of readers and to re - install, but would like to know the community of entry I found lots of helpful tips here.

  Thanks in advance!

  • If you find this or any other answer useful please consider awarding points by scoring the correct or helpful answer *.

  File system is damaged.

  First try to fix with fsck.

  If you also see IO error in the kernel message (use dmesg and look at the last lines), then also could be a hardware problem.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Failed to start after installation ('no internet connection')

  After installation, when I start one of the programs of TC it tells me that either there is no Internet time setting my computer does not. I checked that no proxy server is set and that (of course) my clock is set correctly. We have installed the CHT several times in the team without problems is not a firewall issue. Any ideas?

  ADDING: I checked the four needed to record server address is accessible. Is there some sort of record in offline mode? It seems that even users who really have no internet connection (for example for security reasons) must be able to register...

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Navigation fails after validation

  Hello
  
  I built a form in which I have several tabs (Web tab).
  Different tabs referring to different blocks.
  I use trigger when-tab-page-changed to navigate from one tab to another using go_item('Block.item').
  It works very well.
  
  However, even navigation fails after the update on one of the block or after saving changes to one of the tab.
  Is it possible to find out why go_item() is a failure?
  
  Thank you

  Is your default go_item, or it goes to an element on a page of tabs that is not the topmost_tab_page?

• of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

  media center ehshell.exe received the error message 205 units

  of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

  After you have installed the XP SP3.

  How can I fix this error.

  Media Center worked fine until I installed SP3.

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

  (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

  (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

  (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

  If the problem persists, follow these steps:

  You try to run the following commands to re-register all Media Center services:

  (a) close Media Center

  (b) click on the start menu, choose run and type cmd , and then press ENTER.

  (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

  · Regsvr32.exe atl.dl

  · C:\WINDOWS\eHome\ehl Sched /unregServer

  · C:\WINDOWS\eHome\ehSched/service

  · C:\WINDOWS\eHome\ehRecvr /unregServer

  · C:\WINDOWS\eHome\ehRecvr/service

  · C:\WINDOWS\eHome\ehRec.exe /unregServer

  · C:\WINDOWS\eHome\ehRec.exe/regserver

  · C:\WINDOWS\eHome\ehmsas.exe /unregServer

  · C:\WINDOWS\eHome\ehmsas.exe/regserver

  · Restart the Media Center

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php