Windows 7 Genuine Validation failed after the update of the BIOS

Similar Questions

• I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  Hi jcyho,

  Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Re: Satellite Pro L300 - update after the BIOS, Windows will not start

  Hello

  I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

  Any ideas anyone?

  see you soon
  Phil

  Hi chaospunx,

  Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

  You can choose between the mode of access AHCI and Compatible HARD disk.
  Check this box!

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye

• Satellite A100 does not start after the BIOS update

  Hello

  I downloaded the update to the bios toshiba A100 PSAA8 on the toshiba site and applied using the procedure of updating the bios from windows XP MSE. Restart after the start of the update stopped at the toshiba start screen.

  At startup the screen by pressing ESC watch text mode. The message indicated it confirms the update of the bios version. POST messages are:

  _________________________
  Genuine Intel CPU
  No TPM or TPM has problem
  1015 M system RAM passed

  Press to enter in SETUP
  _________________________

  Pressing F2 just clears the last message in line and then no change is found.

  The laptop comes with windows XP media center edition. I don't know why the TPM secure is enabled. It is possible that toshiba is available with the module of TPM enabled in bios updates that logbook. If this is the case, they must clearly identified as 'not applicable' upgrade for machines that are not relevant.

  I found similar messages around the forum without convincing answer.

  Is it possible to fix this without sending? Even if it turns out to be affordable, it make much sense to pay for the problems caused by toshiba.

  Hello

  Please don t blame someone for you mistakes ;)
  As far as I know that only a few sets of laptops come with TPM.
  If you want to do an update of the BIOS on the models at TPM, you will need to contact the ASP!

  Looks like you used a bad BIOS or bad BIOS update procedure.

  The Toshiba page a BISO update the documentation that describes how to upgrade the BIOS on each series laptop!
  You will find on the page of the Toshiba driver compatible BIOS and information over a large number of details!

  > Is it possible to fix this without sending
  Don t think so, and therefore, you will need to contact the Asp help!

  Good luck

• Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

  Hello!

  Before I have a little problem with my fan, but I do it with the BIOS update. His work!

  Now, I have a little problem of different...
  I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

  Its make me crazy...

  Hello

  Seems the CPU and GPU don t run full implementation after the BIOS update.
  Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

  Check to see if you can change an option is the BIOS.
  You can also try to update a graphics driver and could control Windows 7 power management.
  Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Regarding Windows 8 - OEM key built into the BIOS.

  I have a pre installed Windows 8 HP Notebook (under warranty).

  I get a new HP's HARD drive replacement.

  My question is that if I install a Windows 8 Pro OS with a new activation code on Microsoft Store, then the original Windows 8 - OEM key integrated in the BIOS would get replaced by this new Windows 8 Pro activation key?

  Or if the OEM of origin incorporated in the BIOS key will remain intact?

  Hello

  The original key from Windows 8 will remain integrated in the bios.

  Kind regards

  DP - K

• WiFi connection on c4580 fails after the automatic vista update windows.

  Hello

  There is a month my c4580 perfectly work on WiFi stoped working

  the reson seem to be updated auto matic windows, if I do a system restore the functions of the printer again, but a few days later, the connection went after an auto matic update

  to remedy this, I tried the following

  Following the recommendations of HP

  removed the Hp software and then try to install the drivers again after the download from their website form HP

  tried to install all updates firmware of HP

  tried to install without Firewall (bullguard)

  installed the latest firmware on my Linksys wifi router

  But still no luck

  the printer works perfectly on USB, but if I try to put it on wifi with the installation software stops

  It goes well until after I give my network key, and then it opens the network and communicates for a wile

  the last audit it does is trieng to connect to an IP address, then it stops telling me to fix the connection with the printer

  and the hp software is not responding so I have to restart my computer...

  I have no idea of what I can try again

  Help!

  Thank you

  Niels

  If you have the original CD, it get a L3 uninstall program and run that.  It will remove completely from your software.

  Reinstall the software from hp.com.

• Adobe DC installation fails after the most recent Windows and Mac updated

  During the installation of package (Adobe Creative Cloud) process stops, and then comes back.  Installation seems to be failing when the version check.  Tried the package and install separate;  No compatibility not test Adobe CC cleaning tool are able to correct the problem. Compatibility mode installs all applications except Adobe DC.

  Resolved for Windows 10.  Suite cannot be installed using MSI, instructions included with the configuration application require it be used.  Unable to solve the problem with the iMac OS 10.11

• Certificate autoenrollment fails after the update of the model

  Asked me to extend the period of validity on the certificates that we issue to users to authenticate on our wireless LAN. Group Policy allows us to cause users to automatically enroll for a certificate by using a version 3 template (our issuing CA is Windows Server 2003 Enterprise Edition). Users were able to automatically enroll for certificates with no problems.

  To increase the duration of validity, I modified the model certificate as a business administrator (I also increased the renewal period), then forced all certificate holders to re-register, which changed the model on the CA to 101,0 version (previously it was 100.2).

  None of my users seem to be reenrolled for the updated certificate. The search Event Viewer on my PC, I see four 'CertificateServicesClient-CertEnroll' information events (event ID 65, 64 & 66) suggesting that I connect successfully to the issuing certification authority, followed by a source "CertificateServicesClient CertEnroll" error (event ID 13) and error (ID of the event 6) source "CertificateServicesClient-autoenrollment" (details below). This sequence is generated whenever the autoenrollment is triggered.

  Can anyone suggest what could be the problem here? Thank you very much, Damion.

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-CertEnroll
  Date: 18/07/2011 08:44:24
  Event ID: 13
  Task category: no
  Level: error
  Keywords: Classic
  User: domain\user
  Computer: COMPUTER.exe.nhs.uk
  Description:
  Registration certificate for user domain\username could not enroll a certificate WirelessUser with the ISSUINGCA.domain\Issuing CA 19934 request for domain ID (the request template version is newer than the version of the model of support. 0 x 80094807 (-2146875385)).

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-registration auto
  Date: 18/07/2011 08:44:25
  Event ID: 6
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: COMPUTER.exe.nhs.uk
  Description:
  Automatic registration of certificate for domain\user failed (0 x 80094807) the request template version is newer version of model taken in charge.

  This problem has been resolved by a restart of the server.