Validation of a batch of up to three e-mail addresses
Hello!
The users of my site have a primary e-mail address, and sometimes one or two e-mail addresses.
Until then, of course, they had to change their primary address.
But now I would like to offer them the possibility to have up to two other addresses.
The interface presents, in order:
a - active main address
b the first active substitute (if applicable)
c the second alternate active (if applicable)
User can enter up to three addresses in three fields if displayed alongside those who are currently used addresses
All three addresses must be different from each other.
Until then, nothing very difficult, as I had only one address to verify.
But there are now three of them to check!
The names of the two fields of entry for other addresses are: newFirstAltFld and new SecondAltFld
How can I perform this task?
Thank you very much in advance for your help!
PS: Sorry for the channels in french, but it does not matter anyway (I hope!)
Code I use at the moment:
define an array to store the errors found when using the validateEmail function
var errorsValidateEmail:Array = new Array();
This function is to validate the e-mail address
validateEmailFct = function () {}
If (newEmailFld.text.indexOf("@") < 2) {}
errorsValidateEmail.push ("< font color =' #FF0000 ' >-symbol-" < b > @ < /b >------"is missing or misplaced.) < station > ");"
}
If (newEmailFld.text.lastIndexOf(".") < = (newEmailFld.text.indexOf("@") + 2)) {}
errorsValidateEmail.push ("< font color =' #FF0000 ' >-a point-" < b >. < /b >------"is missing or misplaced.) < station > ");"
}
If (newEmailFld.text.length < 8) {}
errorsValidateEmail.push ("< font color =' #FF0000 ' >-L' address provided is too short.") < station > ");"
}
};
email validation
validateFormFct = function () {}
errorsValidateEmail.length = 0;
validateMailFct();
If (errorsValidateEmail.length > 0) {}
errorMsgFld.html = true;
errorMsgFld.htmlText = "< font color ="#FF0000"> the following errors remain: < br / > < / police > ';
var i = - 1;
While (++ I < errorsValidateEmail.length) {}
errorMsgFld.html = true;
errorMsgFld.htmlText += [i] errorsValidateEmail + newline;
}
}
else {}
verifEmailFct(); / / to check the domain name and validity (if already used or if invalid) of the new email address, not shown here, but it works, I swear!
}
};
There is nothing "not very smart" everything you've done. Anyone trying to solve something rather than hoping to put him them something very intelligent is the best way to learn in my opinion.
An example of a way to implement an approach to table/loop...
var fields = new Array (newEmailFld, newFirstAltEmailFld, newSecondAltEmailFld);
var fieldIDs = new Array ("Main address", "Option 1", "Alternative 2");
validateMailFct = function () {}
for (i = 0; i
If (fields [i].text.indexOf ("@"))< 2)="" {="" 2)="">
errorsValidateEmail.push ("- symbol-" '@------"is missing or misplaced.) ()"+ fieldIDs [i] +")"); '"
}
If (fields [i].text.lastIndexOf ("."))<= (fields[i].text.indexof("@")="" +="" 2))="">=>
errorsValidateEmail.push ("- UN point-" '. -"is missing or misplaced.) ("+ fieldIDs [i] +")"). ;
}
If (fields [i].text.length< 8)="">
errorsValidateEmail.push ("- the address is too short.) ()"+ fieldIDs [i] +")"); '"
}
}
}
Tags: Adobe Animate
Similar Questions
-
Why can I put only three e-mail addresses in when I send an email?
When I send an email, I can put only in 3 e-mail addresses and I would like to put in more, the only way I can is the same e-mail twice before, sometimes it allows me to do it, but most of the time that is not,
I hope I've explained this enough, clear
I can't wait to get a responseAfter the third address, simply press ENTER. This will add an additional to: line.
-
Out with the new v.31.1.0, the: 2 September 2014 version of Thunderbird, I can email is no longer a list of recipients, getting the error msg: F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message. In earlier versions, the addresses of individual e-mail in the list (F & G Committee in this case) are automatically placed in as the e-mail is sent. Is there a solution to this problem?
Read this.
https://support.Mozilla.org/en-us/questions/1019019 -
Request to validate the valid e-mail address?
I received a request by electronic mail NOR community click on a link to validate my e-mail address. Given we were attacked Cyber, phished, etc. several times the link looked suspicious. NEITHER community sends requests for validation of e-mail addresses or is this another attempt of potential cyber attack? I can send a copy of this email to OR if you can provide me with an e-mail address.
MetManager wrote:
NOR community sends requests for approval of... email addresses?
Yes - https://decibel.ni.com/content/groups/ni-community-help/blog/2013/02/11/e-mail-verification
-
I currently use three email addresses in Outlook Express 6.0 - had some problems with my computer recently and now - all three of my email addresses are using the same address book. I don't want that (2 e-mail addresses are working partner - the other is my personal)... Please clarify for me exactly what steps I must take to separate contact lists addresses of three? I can't afford to lose any of them and keep them 'shared' is simply too risky... Please... anyone?
The address book is a wab file and there is a backup of it who has a ~ inside so if you're looking for * ~ * conclude that. See here for more information about the address book: http://www.insideoe.com/files/wab.htm you can export the list as CSV files as well.
Steve
-
I'm trying to set up a list of e-mail addresses that can send to my printer (Photosmart 6520). As it is, the list contains my primary e-mail (?). I can add other addresses to the list and the dialog box seems to accept when I click on "Save". However, whenever I have to disconnect and connect again, all addresses have disappeared from the list - unless my main address - and every time I put in new.
Now, I found that when I go to ePrint-properties, for the first time, the dialog box populates the list with all the emailaddresses who previously to send an e-mail to the printer - whether they are valid or not - and these addresses REMAIN in the list! Don't tell me that this is the way to add addresses to it!
So, how do I add addresses to the list and have their STAY IN THE LIST until I REMOVE them?
Willem Vermeer
Hi Willem.
I would try the method below. Some users have found this method works for them.
1. connect to ePrint Center
2. click on the senders list and add the user as usual.
3. click on Save icon after the addition of address - do not sign off ePrint Center.
4. then send an email to the printer from this sender you just added.
5. once the e-mail has been received by the printer disconnect and then come back in ePrint center and check the list of senders.
Let me know how it goes.
-
I use 8 window live mail with three e-mail accounts. Why my Hotmail gets all my Comcast email too? You help me solve this problem. Thank you! Cloud
Hello
Thanks for posting in the Microsoft Community forum.
According to the description above, it seems that Hotmail gets all the Comcast email on the mail application.
Please go ahead and follow the steps mentioned and later a update on the State of the question.
I suggest you to remove and add all the account and check if that helps.
Application of mail for Windows: frequently asked questions: http://windows.microsoft.com/en-IN/windows-8/mail-app-faq
For all windows related issues please feel free to contact us or let us know and we will be happy to help you.
-
I'm doing some proactive cleaning the contacts whose e-mail address contains characters that are questionable - such as
Unfortunately, I found that I can't create filters for addresses that contain? or * because these two characters are treated as wildcards (? is for a single wildcard character, and * is the joker of several characters).
Someone at - it suggestions on how I can filter for a group of e-mail addresses containing one of these characters?
Update: open a folder with support - special characters * and? are not allowed in the domain of the email address part. That's what is validated during creation.
It is also not really any EASY way to get those email addresses that contain these characters - I can create filters that will shoot only so many email addresses and then filter through Excel. This is going to be painful because I have several million in our database. I may be able to get many of them through other criteria (lack of activity, rebounds, etc.), so I'll probably wait on them.
-
Hi, the creative cloud continues to send my inactive email account validation e-mail. How can I change the e-mail address for verification
email https://forums.adobe.com/thread/1446019 or
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html
-
Validation script to match in a field course another (to check e-mail address)
Hey everybody,
I have an Acrobat X form that I'm working on. Two of my fields are:
Email address
and
2 email address
I have a validation script in place under the email address to ensure that the user enters a properly structured e-mail address.
I need an Email address 2 validation script that makes sure that everything they enter matches what was entered in the field email address.
Someone at - it script alreafy built for this?
Thank you.
If you want to test an exact match, you could do something like:
Get the value of the first e-mail address
em1 var = getField("Email_Address").valueAsString;
See if the value of this field to the other, but only if this field is not empty
If (event.value & event.value! == em1) {}
App.Alert ("your error goes here.", 3 ");
}
You could add code to reject the value (event.rc = false) or do a case-insensitive comparison by converting two lowercase field values.
-
Validation of an element containing the e-mail address
Hello
Anyone developing the chain of validation for the e-mail address elements? I saw the validation of the URL, validation of IP addresses, same date and phone numbers...
Thank you very much!Hello
Check out this site:http://RegexLib.com/DisplayPatterns.aspx
There are many different regular expressions for validation.
Hope that helps.
-Marc -
These emails come from a non-response address, and I get quite a number on a daily basis, so I was wondering if Thunderbird has a sort of virus protection that prevents me to receive. They won't in the junk mail folders or spam folders. I checked with HER on the Web site that sends these emails, and they said that everything was going well at their end. It shows emails through. However, I could not receive even their test sent from their account message no answer. BUT when they sent from another account, it came through fine. So the problem seems to be with my receipt of messages from addresses no answer. This began to happen on December 14.
I thought maybe it's something in my antivirus software, which is something called Symantec Endpoint Protection (provided by my employer), so I tried also the implementation of all the email accounts three on another computer. This serves as my Thunderbird email software but has another antivirus (Avast free) program, but I'm having the same problem.
Finally, I tried bypassing Thunderbird by accessing my three email accounts from the web. Still not received the mails no reply. Would it be to say that Firefox is also involved?
Obviously, * something * on both my think computers these emails 'no response' are spam or virus even. (Yet, I get spam every day a lot of other sites, go figure!) The only thing that the two computers have in common is Thunderbird and Firefox. The computer, I tap on the Windows XP Home with service pack 3 rums. The other computer running Windows7 Home.
My last effort would move to Outlook from M$, and I really don't want to do that! Can anyone of you offer any help? I'm sorry that I'm not a geek and cannot re - program anything, but I will try very hard to understand what you're saying.
Thank you in advance.
Susan
It is between the sender and your Inbox. That's all you can say. Your provider should be able to track your account and see if the message comes from their server.
Thunderbird is a software email client. It runs on your computer and helps you manage your e-mail. It can not download messages that do not in your Inbox on your server vendors.
-
Validation of e-mail addresses
Hello the Experts of Oracle
Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
I have a few email addresses syntax to validate. I did some of my homework but I need expert advice.
I have not yet completely serached the Oracle forum. If someone did or led in the validation of email address please send me the link. I will be grateful
With tab as
(
SELECT "Jbond008 @[email protected]" email from dual Union All
SELECT ' jbond... [email protected]' an email from dual Union All
SELECT ' jbond.008@yahoo... com' an email from dual Union All
SELECT 'Jbond009@hotm%%il.com' Union double, All email
SELECT '[email protected]' Union double, All email
SELECT ' ^ * @hotmail.co.in () ' email from dual Union All
SELECT 'abc@hotmailcoin' Union double, All email
SELECT '[email protected]' From Dual email
)
Select * from tab where
not REGEXP_LIKE (upper (trim (EMAIL)), "[A-Z0-9_%-]+@[A-Z0-9._%-]+\. [A - Z] {2,4} ")"
or regexp_count (upper (trim (EMAIL)),' @') > 1
Validates the rules I have are:
1. no two sign an email address @.
2 No. two period (.) in an e-mail
3. after sign @ no special character or numeric character not only Alphabets
4 at a before @ sign character should be alpha or numeric
5. at least one period should be there after the sign @.
6. the last email address (@Abc.office) must be valid
Thanks for the help/tips
Rajesh
Published by: 792498 on September 2, 2010 12:55Hi, Renon,
I saw not as rigorous as that desired e-mail validation request.
It would be much easier in PL/SQL, but performance will be slower.
If you want to do in pure SQL, I suggest to use the test in a CASE statement, so that you can see easily all channels of test and the results of each.
Comment by your regular expressions, like this:SELECT email , CASE WHEN REGEXP_LIKE ( UPPER ( TRIM (email)) , '[A-Z0-9_%-]+' || -- 1 or more common characters '@' || -- @ sign '[A-Z0-9._%-]+' || -- 1 or more common characters '\.' || -- dot '[A-Z]{2,4}' -- 2 to 4 letters ) THEN 'Good' ELSE 'Bad' END AS outcome FROM tab ORDER BY email ;
It is good to use conditions composed, such as
WHEN REGEXP_LIKE (...) OR regexp_count (upper(trim(EMAIL)),'@') > 1
If that helps. In this case, it is quite easy to test for exactly a sign in the expression of REGEP_LIKE @. (Also, I think you wanted to say "= 1" ", not > 1".)
When you say "2. No two period (.) in an e-mail", you mean not two * consecutive * periods, right? Addresses like "[email protected]" are in agreement.
In this case, you can start to refine your model like this:
{code}
SELECT E-mail
CASE
WHEN REGEXP_LIKE (UPPER (TRIM (email))
, '[A-Z0-9_%-]+' || -1 or most common characters
' (' || -a group consising of...
'\.' || -a simple point
'[A-Z0-9_%-]+' || -1 or most common characters
')*' || -the Group may be repeated 0 or more times
'@' || -sign @.
'[A-Z0-9._%-]+' || -1 or most common characters
'\.' || -point
'[A Z] {2,4}' - 2 to 4 letters
)
CAN 'good '.
OTHER 'bad '.
AS END result
TAB
ORDER BY e-mail
;
{code}
As always, take baby steps. Add some characters to the model, then test it, to ensure that these characters are what you expect.Published by: Frank Kulash, Sep 2, 2010 14:24
-
Have used the master lists for years without problem. After updating today, all I get is the error message above.
https://Bugzilla.Mozilla.org/show_bug.cgi?id=1060901
48 comments:
Magnus Melin 2014-09-09 11:19:31 PDTA tb31.1.1 release is on its way, probably within days.
Update of the news... the update has just been published.
Tools > control upgrade on ThunderbirdIf you want to update, please update your version and to report on the result.
-
I send question not on the computer.
Please create a screenshot of the problem you see by following the guide mentioned in the How to make a screenshot of my problem?.
Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.
Maybe you are looking for
-
Reallocation high - what can I do?
A friend gave me his old 160 GB classic telling me I have to get it in working order... So I tried a few things to fix it, I've been meeting - slow song copy and sometimes play the wrong song. Tried to erase the disc, tried to make the disk utility,
-
Tecra M10 (PTMB1E) - Windows 7 drivers for base system devices
Dear all, I have loaded Windows 7 on my M10 and load all drivers Toshiba relevant (I think!) but have alerts for follow-up in Device Manager items: Peripheral system 5 PCI bus, device 11, function 3 device object name NTPNP_PCI0024 of basic physicsPe
-
Instant ink: adding a 2nd activation code
I signed up for the instant the ink program when I found the $9.99 / month package registration on clearance for $1! Can I buy more than one kit and add it to my account to extend my subscription to save money? Or I would be able to cancel and then r
-
HP Jet 1536 dnf MFP Lasere: 1536dnf MFP Scanner not installed
Demand scanner my printer has stopped working about 4 months ago. I use Windows 7 and since then uninstalled the driver printer everything and removed the printer and re downloaded the driver full features. I tried to install the driver several times
-
How to get the amount of memory installed?
(It's under the Windows operating system) I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware. What is the best way to get the amount of RAM installed programmatically? How do I