Validation of multiple models
I try to have the LC to validate three different patterns in a text field. One would be a letter followed by 6 numbers, two is 6 numbers and three is 9 digits. That's what I have so far. It's close, but not quite do what I need. It's properly validate one, but with two and three, it's whatever it is between 6 and 9 numbers, allowing not just 6 or 9 numbers. Suggestions?
var
r = new RegExp();
r.Compile ("^ [a-zA-Z] + [0-9] {6} |") [0-9] {6} | "[0-9] {9} $"
, "i");
var
result = r.test (this.) RawValue);
If
(result == true)
true ;
on the other
fake ;
I think you must group your regex to get the beginning of the string and at the end of the anchor chain works, try
^ ([a-zA-Z] + [0-9] {6} |) [0-9] {6} | ([0-9] {9}) $
Having brackets after the beginning before the end of the chain anchor and anchor chain.
Without the brackets at the beginning of the anchor chain applies to the first model and the end of the string to the second anchor model so the central motif is allowed for matching numbers 6, 7, or 8.
Tags: Adobe LiveCycle
Similar Questions
-
Created a form on a table. Table 1 a div, lname, fname columns: id (non-null)
Need a validation: If all 3 fields are empty (fname, lname, div) so that it does not accept the entry of the form.
How to make a posting on multiple fields in apex? I can write a function like
If (: fname is null and: lname is null and: div is null) then return True else return False.
But how do you put it in the condition under the process in the Apex section? It means, basically, if all 3 fields are null then do not run line of the table1 process when the user click on create button.
Can someone give me some advice? Thanks in advance.
TaiTai,
You can create page apex level validation where you can do what you have specified.
In the definition of the Page, click on + sing against 'Validation', Slelect "Validation of levels Page" and THEN click, select "PL/SQL" click Next and select here "function that returns a Boolean" put your code.
Return the FALSE value - if the validation fails
See you soon
Hari -
Validations with multiple form provisions on a JSF page
Hello Experts
I have a page where I have several sections, each with a PanelFormLayout and a button "submit". My requirement is that when I click on the "submit" button, only this form must be validated. But in my case, the required fields in the other sections are being validated that I don't want.
Is it possible to achieve it? Please suggest.
What is available including all forms? High school-forms allows to ignore validation on other forms.
http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/40-PPR-subform-169182.PDF
-
Validation in multiple hierarchies, both
Hi Experts,
I have a requirement to validate the 3 different members in 3 different hierarchies at once. For example take 3 members are Cash, 1000_BC, 2000_CC and 3 hierarchies as Business Center, cost center account. If the Member of cash is existed in the hierarchy of accounts 1000_CC must be then existing in Business Center hierarchy and 2000_CC member must be existed in the cost center hierarchy. Is it possible to validate all hierarchies at the time? Here is the validation that I wrote. Please correct me if wrong.
If (Equals (String, SUBSTRING (PropValue (Core.ABBREV), 1, 4), Cash), NodeInHier (1000_BC, Businesshier), false)
Thanks in advance.
Thank you
Bigot
3013323 bigot,
So that means this audit is triggered when the creation of node _AA and will only create the node _AA if _BC and _CC exist.
If _BC or _CC does not exist then node _AA creation will fail that triggers the validation.
And)
NodeInHier (Concat (ArrayItem (Abbrev (), _, 1), _BC),HierarchyNameForBC),
NodeInHier (Concat (ArrayItem (Abbrev (), _, 1), _CC),HierarchyNameForCC)
)
Just to put this in a validation and affect the validation on the _AA hierarchy and see if it works.
Thnaks
Denzz
-
Consulting multiple models of Score lead in Insight
I would like to compare two models of notation in the Score Dashboard drive in Insight. Is this possible?
We have two models as described below.
However, in the Score Dashboard driving Insight, we can see only the active model. I wish I could see the two models in Insight. Page 8 of Eloqua 10 Drive Configuration Guide rating it seems it should be possible, however, I only see one.
Post edited by: J Weis
The aspect of troubleshooting and analysis, whether you have one or more templates "active", is a good point and something I'll discuss with the team scoring lead. Agreed that allowing the comparison of a production model to a model being developed for production, should be possible on any trim.
-
work with multiple models using the muse of adobe
How can I copy pages from one model to another by muse adobe
You can not.
Mylenium
-
Validation for multiple buttons
Hello
A form that a validation should be done after pressing the button record OR create. In the menu dropdown I choose only one. Is there a way to get there without creating 2 validations (or 2 pages)?
Thanks, fried
Published by: fried Sep 20, 2010 05:04Hello
In this scenarios do not use the key when condition.
Use either APPLICATION IS CONTAINED in EXPRESSION1 withCREATE,SAVE
in the expression 1
or PL/SQL Expression with:REQUEST IN ('CREATE','SAVE')
in the Expression 1.
Kind regards
-
Apply multiple models on one html page
I have a model index.dwt I use for each page of my site, but in the different pages that I have another specific model for this page only. I can't apply the second model without crushing everything on the page.
Check these out for a Visual of what I'm trying to do.
http://studentpages.SCAD.edu/~dparso20/stuff/Template1.jpg
http://studentpages.SCAD.edu/~dparso20/stuff/Template2.jpg
http://studentpages.SCAD.edu/~dparso20/stuff/template3.jpg
The third image is what I would like to have but can't seem to understand. Thanks in advance for your help.
EDIT: I think that my problem was that I wanted to insert a template in a template. I hope that that was it, and I can understand thatAny given page can only be a child of a single model. I'm sorry.
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
=================="Objectnull" wrote in message
News:euh8cf$67P$1@forums. Macromedia.com...
> I have an index.dwt model that I use for each page of my website
> but
> in the different pages that I have another specific to model
> who
> the page only. I can't apply the second model without overwriting
> everything on the page.
>
> Check these out for a Visual of what I'm trying to do.
> http://studentpages.scad.edu/~dparso20/stuff/template1.jpg
> http://studentpages.scad.edu/~dparso20/stuff/template2.jpg
> http://studentpages.scad.edu/~dparso20/stuff/template3.jpg
>
> The third image is what I would like to have but can't seem to understand.
> Thank you
> in advance for your help.
> -
validation against multiple records (section multiple registration)
How can I validate the records in a record Multiple point (3 files) against multiple records in a database? In other words, if they have previously registered (and is committed to the database) 'A', 'B' and 'C' and then try to enter "C", "D" and "E", a trigger failure will occur because 'C' is recognized as being already in the database. I'm already having control of duplicate records of subject "during a session" via the form, but does not prevent a user to re - enter and update a different record with the same value as one of the other documents submitted previously. Does make sense? I guess I could control it at the database level, making the the user_id AND primary keys of point value, but I want to control it until the user selects the button "Update".
This should check the records that are unique to that user only. Does make sense?Mark,
You have a post request (PQ) trigger adding or modifying data when a record is being questioned? The when-validate-Item trigger (WVI) will run only when the State of the item is NEW or CHANGED. When you fill out your form with EXECUTE_QUERY(), the ITEM_STATUS should be query.If you use a trigger of PQ, would be to reset the record and status of the article once you set your value in the trigger of PQ. For example:
SET_ITEM_PROPERTY('MY_BLOCK.MY_ITEM', ITEM_IS_VALID, PROPERTY_TRUE);
Another option would be to set the status of all return to the QUERY.
SET_RECORD_PROPERTY(:SYSTEM.trigger_record, STATUS, QUERY_STATUS);
I hope this helps.
Craig... -
Creative cloud validation on multiple devices?
I try to install the software on my laptop under my creative cloud subscription, but it only offers me a trial for these programs. Is it because I have already installed it on my desktop?
You are allowed to facilities on both machines. Try to connect and come back to the laptop.
Sign out, sign in | Creative office cloud app
http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html
-
collectionDropTarget with multiple models
Hi, I use jdeveloper 11.1.1.3 and I have the following scenario
table a drop target
drop table B source
drop table C source
I want the user to be able to drag B and C to A, but I also want to differentiate the two measures. I want to know if it's a B-> A, or a C-> action. Idially I would like to have different dropListeners.
I tried to add two different collectionDropTarget in table A, for example:
< af:collectionDropTarget dropListener = "#{backcalcMargin.paralaviProduct} '"
modelName = "margAllProducts."
action = "COPY" / >
< af:collectionDropTarget dropListener = "#{backcalcMargin.dropProduct} '"
modelName = "margProducts."
action = "COPY MOVE" / >
but the second is always ignored (I swap check it out)
I also hope that modelName is a list, but it is not.
Any suggestions?
TIA
ImaneHello
you know that the drop event contains information about the drag source? This way you can get the information of what it started a drag
Frank
-
Connect a bus to multiple subcircuits
I've got multiple models that need to connect to the same bus. I use sc/hb bus connectors.
I got my bus to the next level. I can connect fine to the first sub-channel. (subcircuits are identical, copied and pasted)
When I try to connect the bus for the second subcircuit, he refuses to allow him and the forces of the bus name to change subcircuit and high level, so they do not correspond in all circuits and I can't connect the appropriate signals.
I need to have all the signals in this bus connected to the next level and also within each of the multiple identical subcircuits.
What Miss me? Why does this work?
Thank you
David B
I don't know that I'm quite what you describe as the first problem. What link is not currently allowed? Is there a specific link I should try to commit in the sample you provided that this poster?
Regarding the second problem - collection of different parts of the bus in different blocks, there are two ways that you should be able to do. When you connect the bus to the subcircuit, it should ask you how you want to manage connections (assuming that you have defined on the internal and external buses of signals). If you know at that time what signal level should connect with what signal line, you can select "Manually rename for merging bus lines" and rename the internal lines in the block to match the bus lines to use.
If you forgot right then what line should be, or if you later add bus lines, you can also do it after. Connect the bus - the safer being options "Rename bus lines to keep all existing bus lines and separate nets" or "rename only bus lines to avoid fusion nets" in this case, then change the subcircuit. Double-click one of the entrances to the bus, and you can select a different line for this entry. Choose the one you want and tell him that you want to change all entries corresponding to this subcircuit bus. This will select a bus line different to the subcircuit to use instead of the one he was using.
Important here is that the various blocks must remain consistent with each other (so if, for example, a block uses 8 separate signals by bus, then all other instances must also use 8 separate signals in the same way). If you try to make a change that would make the incompatible blocks, Multisim will give you the choice to undo the change, or make the same change to the other blocks (which, come to think of it, might be related to your first problem, but I don't see how yet).
-
I have several date fields. MinValue, but for example, let's say that I have only two. Each date. MinValue has a validator method in a managed bean. I have to each date. MinValue to a required attribute bound to the variable iterator. I have both date. MinValue to entry, click on a submit button, validation is called on the first date. MinValue. This validator I need the value of the second date. MinValue. The problem is that the value is zero. I think it is normal because the value has not been validated or submitted.
I want to mention that there are no EO, VO in my case.
This is the code I use to get the date value. MinValue.
ValToDate = (Date) ADFUtils.getBoundAttributeValue ("validTo1");
And the validator
{public Sub validateDateRightTo (facesContext, UIComponent uIComponent, FacesContext, object)}
If (object == null) {}
return;
}
Day rightToDate = object (date);
If (rightToDate! = null) {}
{for (line: {getSelectedRows())}
ValToDate = (Date) ADFUtils.getBoundAttributeValue ("validTo1");
checkDate (rightFromDate, valToDate);
JDev 11.1.2.4
Hello
Looks like you are trying to get the value of the attribute binding inside validator but when the validator is called model would not be updated (phase updatemodel comes after the process validation phase) as a result, you don't see the value inside the validator.
Instead, bind your component of effective date to a variable of bean with getters and setters (using the binding property) and inside the validator call GetValue on this variable (which is nothing more than an instance of inputText).
Sample:
/ * Inside bean *.
private RichInputDate to date;
Getters and setters for this day
Validator Inside
ValToDate date = (Date) toDate.getValue ();
Jean Lou
-
Set the focus on the phone number field when validation fails
Hello
I have a text field set up like a field of phone number, with the following text in the change event to accept only numbers:
if(xfa.event.newText.match(/[^0-9]/)){ xfa.event.change = ""; }
The validation of the model, I have this mask on all tabs (display, editing, Validation and data):
Text {'('999') ' 999-9999}
I want the user to be able to just enter numbers and have the parentheses and added automatically dash ["123-456-7890"].
How the focus to stay on the field when it is not validated? (e.g., insufficient or too many digits). I have looked at validationState , but couldn't find out how to use it (I am a javascripter noob).
Thanks for any help.
in the case of output of your domain:
if (this.rawValue.length !=9) xfa.host.setFocus(this);
-
With immediate SOC = true is always run validation of other fields
11.1.2.2 JDev
I have a popup and the dialog box that contains a set of SOC and InputText fields. I put the attribute 'required' to all the fields of the form to "false" so I can run validation in the dialogListener method.
On the one hand the components of the SOC, I need to show or hide a panelGroupLayout according to the value selected in the SOC. For this SOC, I 'autosubmit = true' to trigger the valueChangeListener method in bean and ' immediate = true' to bypass validation for the other fields in the form.
The problem is that, even if none of the fields are marked as 'required' in the form and even if I ' immediate = true' to the SOC, when I change the value of the SOC, I get a facesMessage saying a couple of fields are required in the t. So it seems to be bypassing the validation on the client and go directly to the validation of the model side during the valueChangeEvent of the SOC, and I don't want ANY type of validation to perform during the action autosubmit to one of the fields on the form. I use an addPartialTarget in the valueChangeEvent to refresh the panelGroupLayout after you have determined whether or not it should be displayed.
Here is the Declaration of .jsff to the SOC and panelGroupLayout:
<af:selectOneChoice value="#{bindings.ItemTypId.inputValue}" label="#{bindings.ItemTypId.label}" shortDesc="#{bindings.ItemTypId.hints.tooltip}" id="soc4" autoSubmit="true" valueChangeListener="#{pageFlowScope.MyBean.selectedItemTypeValueChangeListener}" immediate="true"> <f:selectItems value="#{bindings.ItemTypId.items}" id="si4"/> </af:selectOneChoice> <af:panelGroupLayout id="pgl1" rendered="#{pageFlowScope.MyBean.passingScoreReq}" binding="#{pageFlowScope.MyBean.pglPassingScore}" clientComponent="true"> <af:inputText value="#{bindings.PassingScorePct.inputValue}" label="Passing Score" columns="#{bindings.PassingScorePct.hints.displayWidth}" maximumLength="#{bindings.PassingScorePct.hints.precision}" shortDesc="#{bindings.PassingScorePct.hints.tooltip}" id="it1"> <f:validator binding="#{bindings.PassingScorePct.validator}"/> <af:convertNumber groupingUsed="false" pattern="#{bindings.PassingScorePct.format}"/> </af:inputText> </af:panelGroupLayout>
Here is the code of the bean that performs the valueChangeEvent for the SOC in question:
/** * Handle value change event for Item Type SOC on Edit Item popup * @param valueChangeEvent */ public void selectedItemTypeValueChangeListener(ValueChangeEvent valueChangeEvent) { Long newItemTypId = (Long) valueChangeEvent.getNewValue(); passingScoreReq = false; RichSelectOneChoice soc = (RichSelectOneChoice) valueChangeEvent.getComponent(); List<UIComponent> socItems = soc.getChildren(); UISelectItems uiSelectItems = (UISelectItems) socItems.get(0); List<SelectItem> listSelectItems = (List<SelectItem>) uiSelectItems.getValue(); for(SelectItem item : listSelectItems){ if(item.getValue().equals(newItemTypId) && item.getLabel().equals("Test")){ //The selected item is a 'Test' type, so we need set set passingScoreReq to true and refresh the pglPassingScore PanelGroupLayout passingScoreReq = true; break; } } AdfFacesContext.getCurrentInstance().addPartialTarget(pglPassingScore); }
You can try setting skipValidation = true in your pagedef.
Thank you
Maybe you are looking for
-
Firefox don't keep me connected when I ask him to
whenever I come Firefox I have to connect to my email & it remembers me when I him ask for how can - I address this issue
-
external monitor for HP Omni 10
What can I use as an external monitor to the HP Omni 10? I have a HP W7072a, going to work?
-
Is it possible to have two mice connected at the same time?
Hello. I have a gamer mouse, and I am pretty tired of changing the battery every now and then. So I was wondering if I could connect a wired mouse, I could use on the desktop, while my current mouse is always connected - for when I want to do some ga
-
Microsoft SQL server 2005 express edition - error 737D
original title: microsoft SQL server 2005 express edition I tried to install an update to Microsoft SQL server 2005 (security for the SQL Server 2005 Service Pack 3 (KB970892) update Download size: 18.8 MB You may have to restart your computer for th
-
Contacts transfer blackBerry classic
My contacts transferred from my work computer when I created my work email. The only thing is, only the e-mail information transferred and no phone information. Any suggestions?