Validation of the user interface of by-pass when the click on the menu

Similar Questions

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When you visit a particular site my user name is entered automatically when you click in the required area. I want to avoid this, how?

  This site requires a username to be filled in a specific area and in another box, you enter a series of numbers generated by a generator of numbers (so not a password - different series each time that you open a session).
  However I do not want my user name appears automatically in the first box. Trying to change that in the security settings (extra-options-security), there is a password section where you can choose any exceptions to the rule of the memory (if the box remember is marked). When clicking the exceptions button, the url of the site I'm talking about is not displayed, and it cannot be entered either, since you can't delete here.
  When you click on the option "saved passwords", nor the site, nor the username is listed. I think I've read all the help sections regarding usernames and passwords, but found no solution.
  How can I avoid this username (so only a user name - not the usename/password combination), appear in the box?

  Click on the box, hover over the drop-down menu with your mouse, if you select the word you want to delete, and then press the delete key. If Firefox fills automatically in forms of control

• When I click on main menu and change the tiles to open it by default to 100%

  When I click on the three lines high parell right I decrease % tiles so see the but when I go to another site and want to then open another tab that displays 100% how to change that and it will not change to 100%

  There is a feature that interferes with the memory of your zoom level preferred for the new Firefox tabs page. Here's where you can go:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.preload to change its value from true to false

  After the change, if you have any 'new tab' pages open, close them and open a new one change, the zoom setting and now we must remember.

• "When I click on: Favorites" menu drop-down will remain visible. It flashes and the.

  When I click on 'Favorites' from the menu drop-down flashes momentarily and is therefore not visible. If I hover over the list, each bookmark flashes momentarily and then not be visible. The list is actually still there because when I go to where it should be, the hyperlink is displayed in the lower left corner of the window.

  In Firefox 4 and later Safe mode disables extensions and disables hardware acceleration.

  • http://KB.mozillazine.org/safe_mode

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• User account control comes not when you click on

  I have Windows 8 on my computer.

  I have parental controls on my computer. This means that I am not an admin, so when I turn on all the programs that require the approval of the UAC, it didn't work. I have disabled UAC thought, it would be useful, but now I can't run anything (pictures, videos) at all. When I try to click on the button of the UAC in the Control Panel, it does nothing. What should I do?

  Hi HavocNades,

  This problem may occur because of the limited user account authorization. I'm sorry to know that you are facing this problem.

  You must connect to an Admin account and make changes accordingly. User Account Control (UAC) notifies you before changes are made to your PC that require administrator-level permissions. By default, UAC is set to warn you as soon as apps try to make changes to your PC.

  What are user account control settings?: http://windows.microsoft.com/en-US/windows-8/what-are-uac-settings

  Response with the State of the question and we will be happy to offer you our help.

• How to change the user interface of the entity object indicators / Validation msg when running?

  Hello

  I use JDeveloper with version 11.1.1.6.3. Given my requirment details below.

  Suppose I have a (say 'EMPLOYEE_RATING') table in DB with the following structure.

  Columns:

  1 EmployeeId (Employee Id)

  2 RatingType (values can be in Stock or Bonus)

  3 RatingLevel (values can be 1, 2, and 3)

  Constraint:

  EmployeeId, RatingType and RatingLevel all together must be unique.

  Requirement:

  The customer's requirement is to have two screens of rating (one for Bonus another stock) and display different user interface boards and validations as follows.

  1 RatingType is a hidden field, are defined with the default (Bonus or Stock) based on the screen that the user opens.

  1. for the Stock screen, RatingLevel label should be "Stock note.

  2. for the Bonus screen, the label should be 'Bonus Rating'.

  3. for validation, the message must be 'Bonus note level must be unique' or 'Level of Stock of notes must be unique' ADB on the user screen opens.

  Implementation:

  I have a def EO (for example "RatingEO") and VO (for example ' RatingVO') def. Tips UI (Label) are given at the level of the OS. Also the unique constraint validation is made to EO with the message ' {0} and {1} must be unique, where {0} is source.hints.EmployeeId.label "and {1} is source.hints.RatingLevel.label.  I also did the shuttle two different instances of the VO (EmployeeRatingBonusVO and EmployeeRatingStockVO) in the request form (although BonusTaskFlow and StockTaskFlow are set to open with the new transaction, Intension of the two shuttle different named instances is to have the common code in VO. impl class but can run different business logic code by checking the name of the instance of VO)

  Question:

  Since I have two different pages, I can define two different labels in the jsff, but I can't change the commit message defined at the level of object entity based on open display. At the opening of the screen, depending on the type of screen, I should be able to change the label specified at the level of the entity object. (It should not affect the definition but only the instance). As this entity object cannot be distinguished (if it belongs to Bonus or Stock), I have problem on how to change the indicators of UI during execution.

  Any help on this would be appreciated! Thank you.

  Rami

  Post edited by: rami

  I tried your script.

  I created the secondary key with EmployId and rating level. I added validation of Unique key. In failure handling handling section of the validator, I gave the error message like: {0} must be unique. For token 0: I gave RatingType (here RatingType is the name of the attribute in OT).

  We give the default for RatingType as Stock Bonus in VO. kind RatingType get its value or Stock Bonus based on the original Version that we use.

  I hope this helps.

• Must pass the value of the user interface

  Hello!!
  
  I use jdeveloper 11.1.1.5
  I had dragged and dropped three textboxes entered my user interface
  I need to pass the values of the user interface to my methods of AMImpl
  
  that is in my methods of AMImpl
  
  VO2.setNamedWhereClauseParam ("Year", [AF:ImputTextBox1]);
  VO2.setNamedWhereClauseParam ("period", [AF:ImputTextBox2]);
  VO2.setNamedWhereClauseParam ("bu", [AF:InputTextBox3]);
  VO2. ExecuteQuery();

  What is the code that lets you get this error? It is obvious that you had the wrong argument type.

• How the parameter values can be passed to OBIEE reports of the user interface

  Hello
  
  Does anyone have an idea on how to pass parameters to the UI (user interface of a java application) to
  OBIEE report page. Based on the value of the parameter passed, the report page should be displayed for ex: the product
  name must be selected in the user interface, then the page of the report must show sales for this product
  Alone.can u please let me know how this can be achieved. Any help would be appreciated.
  
  Thank you
  Leela

  Hi Leela,
  What you're looking for can be accomplished with GO URL, see here:
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyWebAdm/AnyWebAdm_APIWebIntegrate6.html#wp1005251

  Kind regards
  Alastair

  Published by: AlastairB_UK on October 26, 2009 15:27

• Pass valid for the user to another application.

  Hello
  
  I have two applications 224 and 225. Now, I want the user to log on to 224 and if properly they can click on a link that redirects to the first 225 page without asking their identifiers.
  
  I placed in my link target as url type and have the next f target URL? p = 225:1: & SESSION. :
  
  But when I click on it it takes me to 225 but this isn't the same session id and it asks me to connect.
  
  I made sure that both applications use the same authentication type.

  Hi Alistair,.

  Please change your application: the components shared > authentication schemes > > change the authentication scheme

  Near the bottom is "attributes of the Cookie. Put the same cookie name in each application that you want to share information across. You can make any name you want, just make sure that all applications use the same name.

  Also: All applications must reside in the same workspace APEX. There may be a way to access information about the application across different areas of work, but I haven't looked into that.

  Then, when you call the second application of the first, the url would be something like this: f? p =:: & APP_SESSION.

  That is to say: f? p = 105:1: & APP_SESSION.

  Do not forget to put the & before APP_SESSION and the period after. This will call request number 105, go to page 1 and transmit the session for the current user information.

  Good luck
  Don

  You can reward this answer by marking as being useful or correct :)

• Possible bug found in hyperlinkctrl.c when you use the "VAL_POINTING_FINGER_CURSOR" mouse cursor in your own user interface.

  Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI.

  I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control.

  The error is recoverable error: ' from the mouse cursor is not valid.

  This error breaks in RunUserInterface (never seen anything like this before and I use CVI since version 3.1).

  This happens whenever I mouse - hovering anywhere on the Panel that contains the new hyperlink control.

  I also had a hack temporary to solve the problem, for now, I'll pass it along to this announcement...

  The hyperlink control's source code is located in \toolslib\custctrl\hyperlinkctrl.c

  The bug/problem lies in the service of reminder (of HyperLinkPanelCallback), specifically in lines 460 to 465.

  This hyperlink control wants to use the VAL_POINTING_FINGER_CURSOR as its default cursor when you hover over the custom hyperlink.

  However, if you already use 'VAL_POINTING_FINGER_CURSOR' in your user interface, the branch which verifies that you use what he thinks is 'his own' thread-safe mouse cursor ID, so that can reset it by using his "token concatenation" - created macro "GetTsvCursor", is not an 'else' branch to protect the picture when you actually use the cursor pointing finger... where the error that the mouse cursor is not valid. Here is the snippet of these lines.

  The mouse is not over a hyperlink
  If (cursor is VAL_POINTING_FINGER_CURSOR)
  {
  Reset the cursor to the previous cached cursor
  cursor = GetTsvCursor();
  errChk (SetMouseCursor (cursor));

  ... etc...

  }

  So my hack was to change the type of cursor to "VAL_CHECK_CURSOR" in place and place the cursor of "VAL_POINTING_FINGER_CURSOR" in three locations in this function, then rebuilt files x 86 and x 64.

  Hey Luis, finally win a free T-shirt of LabWindows/CVI with not only have reported this bug, but also to give the precise location of the source, as well as a work around?

  :^)

  JB

  In the meantime, I have submitted a bug with ID #545203 report to track down this problem.

  -Johannes

• Why is there no user interface for moving the cache locations/profile?

  OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
  (this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
  To change your profile location? The doc only that talks on this subject here:
  http://KB.mozillazine.org/Moving_your_profile_folder
  and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?

  And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?

  There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)

  Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.

  Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.
  
  https://developer.Mozilla.org/en/Profile_Manager
  
  https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager
  
  http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/
  
  You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package.

• Adding custom flags to the TestStand UI user interface

  Hello! I'm sure this has been asked before, but I can't really find what I am looking for. I have a TestStand sequence that contains a stable loop cycle parts several times. I would like to show a pass fail count on each side on the user interface according to the current state of sequences (real-time). the parties can run 1000 times or more, and the UI should show the count for each + a LED to show if the component is always active.

  What is the best way to do something like that? The mail user interface? If so how do I set up the messages and have a counter for each share value? Each of the parties would have its own unique message?

  Thanks for any help you can give me. If you could provide a quick example.

  Bill

  Don't know what version of LabVIEW and TestStand, you have, but I threw together a little demo of what you want.  Just run the TopLevel.vi, then open the sequence in the zip file.

  Here in LV 2014 and 2014 TS.

  Kind regards

• Graph XY on the custom user Interface

  Hello.  I'm kinda stuck (or really stuck ).  In any case, I'm newbie.  That being said, I've had a few really good help on how to pass table through the postuimessage (xparamdata) of teststand to my user interface customized a few weeks ago.  It really helped.  Thanks again.  However, I'm still another question.  I'm moving a container of teststand.  The container or the cluster of table and table x of y in a XY Chart.  I pass to my custom IO and try to update a chart XY on my IO.  I tried to use the same code that I used for a table, but it does not work... of course.  I just need a little help to find out how to get this update on my graph XY on my IO.  The attached photo, this is what I have so far, but it is not close to work.  Can someone give me some advice?

  String of BTW - looking for you wouldn't array1 and array2.  It would be the names of the tables in your cluster.  In TestStand search strings are the relative path to the object of the referenced property.  In this case your container is referenced from which is the name of your berries.

  Hope that makes sense.

• E-mail user interface executable back to the file of the sequence

  How can I move a message from the user interface of the executable back to a file of sequence?

  (TS_PropertySetValString) does not seem to work as I want it.  I get an error that the variable in the search string is not recognized.

  any help?

  Thank you

  You should always use PostUIMessageEx.

  As the collar of activeXDataParam ThisContext.  A single word.  ThisContext refers to the current SequenceContext, then you can always be assured that you are referring to the current context.

  Here is an example that shows how the ThisContext: http://zone.ni.com/devzone/cda/epd/p/id/5838

  Instead of him passing as parameter you are passing as a UIMessage.

  Hope this helps,