validation of the values when the user entering advanced table

Similar Questions

• Pop - up Messagebox when the user enters an incorrect value in the TextField

  

  I want to display a pop-up message box when the user enters an invalid value, or an empty value in the TextField.

  Popup wil Messagebox displays a notification message to the user to enter the correct value in the textfield.

  I want to use c + c++ / qt code cascades.

  Have you made progress on this issue?

• Get the field to remain Virgin until the user enters the value in the previous field used in the calculation

  I work on a PDF form and am stuck on one of my calculations. There are two fields 'desired Start Date", which is a date entered by the user. The "desired end" date is one year from date entered by the user. I figured out - however, before the user enters a date, I want this field remains empty. Currently, it fills with 01/00/000. How can I get this field to calculate not unless a date is entered by the user? So far, I tried this but can not get the blank to stay:

  If the field 'Desired Start Date' is empty, leave 'to' field blank

  var myStartDate = new Date (this.getField("Desired_Effective_Date").value);

  If (((myStartDate == 0) & & (getField("myStartDate").valueAsString = "")) {event.value = "";})

  If the field "Desired Start Date" is an effective date, use the date to calculate one year after the date of entry.

  }

  else {this.getField("to").value = util.printd ("mm/dd/yyyy", new Date (myStartDate.getFullYear () + 1, myStartDate.getMonth (), myStartDate.getDate ()))}

  Try the following than the calculation script custom field "to".

  Get the value of the date field beginning

  var sStartDate = getField("Desired_Effective_Date").valueAsString;

  If the start date field is not empty...

  If {(sStartDate)

  Converts a date in a date object string

  Kai = util.scand ("mm/dd/yyyy", sStartDate);

  Add a year

  oDate.setFullYear (oDate.getFullYear () + 1);

  Set this field to the calculated date value

  Event.Value = util.printd ("mm/dd/yyyy", anyway);

  } else {}

  This field blank because the input field is empty

  Event.Value = "";

  }

  You may need to change the date format "mm/dd/yyyy", I used to match the formats of date fields.

• Procedure for the number of working days per month when the user enters to and from everyday

  Hi all

  Can provide you a solution to this - procedure for the number of working days per month when the user enters and days.

  Suppose that the user enters November 18, 2014 start date and date as November 23, 2014.

  The output should display

  Count: 4

  November 18, 2014 Mar

  Sea 19 November 2014

  November 20, 2014 game

  Fri November 21, 2014

  It will exclude Saturday and Sunday.

  Hello

  Here is an example of removing dates Saturday and Sunday:

  with days as(
       select (trunc(sysdate, 'YEAR') + level) as col from dual
       connect by level < 365
  )
  select * from days
  where trim(to_char(col, 'DAY', 'NLS_DATE_LANGUAGE=ENGLISH')) not in ('SATURDAY', 'SUNDAY')
        and col between to_date('18.11.2014', 'DD.MM.YYYY') and to_date('30.11.2014', 'DD.MM.YYYY')
  order by col;
  

  Cheerz,

  Stako

• Validation of the user interface of by-pass when the click on the menu

  Hello
  
  Scenario:
  
  Go to any entity change the navigation bar page, having required validations on the fields of the user interface.
  
  Now, try to browse page by clicking on an item of menu registered in the recent items menu in the Shell of the user interface.
  
  The required validation is triggered.
  
  Earlier we faced a similar question of the necessary validation is triggered when the click on the button 'Cancel' in the edit page. At this point, we immediately applied = true to the Cancel button and the problem is solved.
  
  Is there something on similar lines for the validation of UI bypassing during the click on the recent items?
  
  Thank you
  Ravi

  Hello

  Earlier we faced a similar question of the necessary validation is triggered when the click on the button 'Cancel' in the edit page. At this point, we immediately applied = true for > Cancel button and the problem is solved.

  It is the same for the af:menuItem IE (immediately apply = "true" to get around the validation of the user interface [client side], its support by almost all components of the adf).

  Kind regards
  Sicard.

• Notice when the user enters the field

  Y at - it code of CF I could put in a page, maybe the application.cfm that would show the user a message instead of the actual page?

  I had a site www.abc.com that I closed, but I must leave the pages on the server.

  I want it so that when a user enters the domain www.abc.com that they receive a message that the site is closed instead of the actual page.

  I want the user to get the message if they go to the homepage of www.abc.com or if they go to any page of the site.

  For example, www.abc.com/folder/index.cfm.

  Any suggestions?

  In Application.cfm, upstairs:

  This site is closed.

• Check the box if the user enters the value field or text date input

  I have a business that, the rule of a JSF page with several components and groups. If the user enters the value in a date component or an input text component a selectOneCheckBox must be checked automatically. And even unchecked if the value of the field date field or text entry is deleted. I followed so far recommended for part of the ADF. I don't know what layer of the application of these rules should be applied.
  
  Please suggest how to get this implemented business rule
  
  Concerning

  You can implement the required functionality in the user interface layer.

  Here is the snippet of code for features:
  (1) page JSPX:

  
  
  
  Binding = "#{UIPageBean.inputDate} '"
  valueChangeListener = "#{UIPageBean.inputDateChanged}" / >
  
  Binding = "#{UIPageBean.inputNumber} '"
  valueChangeListener = "#{UIPageBean.inputNumberChanged}" / >
  
  readOnly = "true" simple = 'true '.
  Binding = "#{UIPageBean.CheckBox} '"
  partialTriggers = "id1 it1" / >
  
  

  (2) code Bean:

  public class UIPageBean {}

  Private RichInputText inputNumber;
  Private RichInputDate date. MinValue;
  box private RichSelectBooleanCheckbox;

  public UIPageBean() {}
  }

  {} public void setInputNumber (RichInputText inputNumber)
  this.inputNumber = inputNumber;
  }

  public RichInputText getInputNumber() {}
  Return inputNumber;
  }

  {} public void setInputDate (date RichInputDate. MinValue)
  this.inputDate = date. MinValue;
  }

  public RichInputDate getInputDate() {}
  Return date. MinValue;
  }

  {} public void setCheckBox (RichSelectBooleanCheckbox box)
  this.checkBox = checkBox;
  }

  public RichSelectBooleanCheckbox getCheckBox() {}
  return box;
  }

  {} public void inputDateChanged (ValueChangeEvent valueChangeEvent)
  this.checkBox.setSelected (false);
  If (this.inputDate.getValue ()! = null &)
  this.getInputNumber () .getValue ()! null = &.
  this.getInputNumber () .getValue () () ().equals("") .trim m:System.NET.SocketAddress.ToString is
  false) {}
  this.checkBox.setSelected (true);
  }
  }

  {} public void inputNumberChanged (ValueChangeEvent valueChangeEvent)
  this.checkBox.setSelected (false);
  If (this.inputDate.getValue ()! = null &)
  this.getInputNumber () .getValue ()! null = &.
  this.getInputNumber () .getValue () () ().equals("") .trim m:System.NET.SocketAddress.ToString is
  false) {}
  this.checkBox.setSelected (true);
  }
  }
  }

  Thank you
  Nini

• Date field time: make calendar will appear when the user enters form.

  It is possible with JavaScript to make the calendar will appear once the user enters the date/time field (click and activate the date field time)?

  The field default time is really limited and the calendar can hardly be noticed.

  Thanks in advance!

  Hello

  as much as I know there is no to open the widget calendar via script.

• URL of list of the user-entered recordable

  I found the following on the net which is a basic example of using the sharedObject method to allow users to record data, however I would like to improve this example, whereas in the text box, the user can enter different URLS, then when each url that the user entered is clicked, it will sail to that specific page.

  I know that allowing a user to simply enter a url into a single text box and then have the link to the relevant site once clicked is a simple process, but I want to achieve this in the following example, so that users can save their list of URLs, return their entire list empty or perhaps remove each link individually by clicking on it , and then clicking a button Delete.

  My main problem is that it seems the selectedItem.text property are not accessible in order click on a text box and apparently not the itemClick function is available in a text box as it can in a TileList for example, so I don't know how I can get it to navigate to the url contained in each element when each item is actually clicked. The text box should be changed to another type of component to integrate it? :-

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:Application ' xmlns:mx = ' http://www.Adobe.com/2006/MXML "

  " layout ="absolute"" "

  creationComplete = "initSharedObject ()" " >

  < mx:Script >

              <! [CDATA]

  import flash.net.SharedObject;

  public var sharedObj:SharedObject;

  private function initSharedObject():void{ }

  sharedObj = SharedObject.getLocal ('myTasks');

                  if (sharedObj.size > 0)

  textareaTasks.text = sharedObj.data.tasks;

              }

  public function localconnectionHandler(msg:String):void { }

  textareaTasks.text = textareaTasks.text + msg + "\n"

            }

  private function clearTasks(event:MouseEvent):void { }

                = textareaTasks.text "" ;

            }

  private function saveTasks(event:MouseEvent):void { }

  sharedObj.data.tasks = textareaTasks.text;

  sharedObj.flush ();

            }

  private function deleteSavedTasks(event:MouseEvent):void { }

  sharedObj.clear ();

              }

              ]] >

  < / mx:Script >

  "" < mx:Panel horizontalCenter = "0" red ="0.5" verticalGap = "15" " "

  "" paddingLeft = "20" paddingRight ="20" paddingBottom = "20" paddingTop ="20"" "

                height=" 300 " >

  " < mx:Label text = 'your tasks are... " />

  " < mx:TextArea id ="textareaTasks"" "

  top=" 20 "left =" 20 "right =" 20 "bottom =" 20 "

  width=" 100% "height =" 100% " />

  < mx:HBox >

  " < mx:Button id ="btnClearTasks"click ="clearTasks (event)"

                          label=" Clear Tasks " />

  " < mx:Button id ="btnSaveTasks"click ="saveTasks (event)"

  " label = 'record the tasks to the Shared Object"""/ >

  " < mx:Button id ="btnDeleteSavedTasks"click ="deleteSavedTasks (event)"

  " label = 'delete saved tasks Shared Object"""/ >

              < / mx:HBox >

  < / mx:Panel >

  < / mx:Application >

  If this post answers your question or assistance, please mark it as such.

  Very well. The shared object works correctly now. Only the file from the main application had to change. The AddURL component above is fine as it is:

  
  http://www.Adobe.com/2006/mxml '.
  layout = "absolute" creationComplete = "initSharedObject (); » >
   
      Import mx.events.ListEvent;
  Import mx.collections.ArrayCollection;
  import flash.net.SharedObject;
  Import mx.managers.PopUpManager;
  import AddURL;

  private var sharedObj:SharedObject;
  [Bindable] public var urls:ArrayCollection;
       
  private function initList (): void {}
  URL = new ArrayCollection();
  }

  private function initSharedObject (): void {}
  initList();
  sharedObj = SharedObject.getLocal ("urls");
  If (sharedObj.size > 0) {}
  var urlList: Array = sharedObj.data.urls.split(",");
  URL = new ArrayCollection();
  for each {(var url: String en urlList)}
  If (url! = "") {}
  var urlObj:Object = {url: url};
  urls.addItem (urlObj);
  }
  }
  }
  }

  private void saveUrls(event:MouseEvent):void {}
  var urlList: String = "";
  for each {(var obj:Object in the URL)
  urlList += obj.url + ",";
  }
  sharedObj.data.urls = urlList;
  sharedObj.flush ();
  }

  private void deleteSavedUrls(event:MouseEvent):void {}
  sharedObj.clear ();
  initList();
  }

  public void gotoURL(evt:MouseEvent):void {}
  navigateToURL (new URLRequest (urlList.selectedItem.url), "_blank");
  }
       
  private function addURLDialog (): void {}
  PopUpManager.createPopUp (this, AddURL, true);
  }
       
  public void addURL (url: String): void{}
  urls.addItemAt ({url: url}, 0);
  }
  ]]>
   
   
  paddingLeft = "20" paddingRight = "20" paddingBottom = "20" paddingTop = "20".
  height = "500" >
     
       
             
     
     
  Low = "20" width = "100%" height = "100%" dataProvider = "{URL}".
  alternatingItemColors = "[0xcee7f6, 0xf4d5f7]" rowHeight = "30" >
       
         
           
             
  Click = "outerDocument.gotoURL (Event); » />
             
             
  Click = "{outerDocument.URLs.removeItemAt (outerDocument.UrlList.SelectedIndex)}" / > "
           
         
       
     
     
       
  label = "URL" clear / >
       
  label = "Save URLs to Shared Object" / >
       
  label = "delete saved Shared Object URLs" / >
       
  label = "reload saved Shared Object URLs" / >
     
   
  

• Slide auto is using of multiple text entry boxes once the user enters two of the six answers

  I have several areas set up on a slide text entry.  The user must enter the answer in each text box.  And even though I have properties of all TEB "break from legends of success or failure", auto slide advance once the user enters only two of the six responses.  I thought that perhaps insert a click box and setting ' to pause until the user clicks on "would resolve the issue... but it is not.  Here's a screenshot of what my slide looks like and a screenshot of the properties that I set myself for each TEB.  Can someone help me please?  I need all six TEB to complete before moving to the next slide.

  

  

  

  The most important screenshot is missing: chronology. Where are the pausings for the TEB?

  You can start by changing the Actions on the success and the last attempt: they are both set to Continue, which means the playhead will be published immediately after a good response and after exhausting attempts in case of wrong answers. Set them to any Action.

  No Submit button? Only shortcut key entry for each TEB?

• How can I make the submit button that is activated after the user enters a digital signature?

  I have a form that contains a digital signature field. Once the user enters their digital signature, my "submit" button is disabled. I wanted that this remains activated for the user can submit the form with their digital signature and the form (in PDF format) as an attachment.

  I'd appreciate any help.

  Kind regards

  Fanny

  You can configure the fields of lock after the signing of the digital signature. In Livecycle Designer across this field properties: object-> TAB Signature properties. Here can exclude the button submit or any other field, if necessary, do not lock after signing.

  -Rambeau.

• Paramerterized Interactive reports - when running or by clicking on a specific page, how can I stop the report from until the user enters the rendering parameters.

  I wasn't able to post a picture in this post

  But it could look like this

  Order type - ALL - (selection list) GO (button)

  When I enter this page - the report is rendered ALL the data because the SQL is as follows

  AND ol.unit_selling_price <>0
  AND(ordertype.transaction_type_id =:P1_TEXT OR:P1_TEXT IS NULL)
  ORDER BY 3

  Its installer in this way because I want that all returned records if the user makes no selection BUT click ON the 'GO' or 'SEARCH' button

  I have just not all records rendered as soon as the initial screen and user selection options... IE launch via a button.

  Thank you

  Create an item hidden on the page and a calculation allows you to set a value for the element that is hidden when the "GO" button is presented.

  Add a line to your SQL to verify that the item is not null:

  ...
  AND :P1_GO_FLAG IS NOT NULL
  ...
  

  Or better yet, if you have valuables parameters in another region define the condition in the area of interactive report to be when the value of the hidden item is not null.

• Display alerts when the user enters a code duplicate

  Hello

  I have a multi block (no database). The entries of the user codes:

  for example 1.  01

  2 01

  3 11

  The form shall either warn the user when he entered a duplication of code or the alert should

  pop up when the user clicks the close button.

  Any help to implement this please?

  Thank you.

  Dear Sir

  Check the following avoid duplicated records in the same block

  Manu.

• How to operate the user enter value query and get the result on the text element

  Hello
  
  I'm really beginning to JDeveloper and ADF, I want to execute the query below, before with forms, I just add: TEXT_NAME to enhance the users entries, what should I do now with ADF, really unclear question and I would be grateful all help with that.
  
  Select
  NVL (min (substr (a.StartTime, 1, 8)), 0) Service_Start_Time, nvl (sum (a.sessionvolume), 0) Total_Traffic_KB
  Of
  aaa_bill one
  where
  msid =: TEXT_ITEM
  and starttime > = (select max (fee) FROM aaa_bill
  where msid =: TEXT_ITEM and accountreason = 5);

  You can use a form of parameter ADF for this requirement.
  https://blogs.Oracle.com/Shay/entry/combining_multiple_queries_and

• vRO 6 - input validation in the user presentation

  Hello

  I need to make an input validation in a presentation to the user, who will get imported later in the vRA 6.

  The user must enter information in a form and there are 3 fields. At least one of the fields should be filled with entry, so that the workflow can continue.

  How can I force at least one of the 3 mandatory fields? It can be field also possibly 2 or all. Is this possible without action running in the background?

  Thank you!

  Hello

  A possible way to achieve this is the following:

  Suppose that there are 3 fields of entry of type string, named p1, p2 , and p3. In the presentation Editor, add a property of type 'validation Custom' with the value

   

  (#p1==null && #p2==null && #p3==null) ? "At least one field should have value" : null
  

  each of the parameters p1, p2, and p3.