Values of the data point on the cards

Similar Questions

• How to get the value of the card that is clicked

  Hello

  I work in the apex 5.0 with universal theme.

  I had a type list box.

  Attributes, I chose the cards of value as a list template.

  When someone clicks on the map, it will be redirected to another page. Before that happens, I want to fix an application with the value of the card that has been selected.

  I can't understand how to do this. I tried with dynamic action, but that has not worked.

  Hello

  If I'm not completely wrong and that you set the item asking "Checksum Required - Session-level" we'll automatically the checksum protect your URL and users will not be able to change it manually. Don't forget that with dynamic action that is executed on the client side, you will never be able to change your point of application safely. All dynamic action can can also be done manually by the user. Links with checksum are safe because him are generated server-side.

  Concerning

  Patrick

• Retrieve value of the card

  Hi all
  
  I want to retrieve the value of the card. What droplets used for this?
  
  Thanks in advance

  I want to retrieve the value of the card. What droplets used for this?

  You can you ForEach droplet.
  For more information, you can go through:
  http://docs.Oracle.com/CD/E23095_01/platform.93/PageDevGuide/HTML/s1316foreach01.html
  Example:

  
        
        
                Key is     value is 
         
  
  

  -RMishra

  Edited by: RMishra February 12, 2013 18:37

• Skillbuilders Super LOV - values of the card IN an another LOV?

  Hello
  I'm trying to get the value of a STAFF to return in another SLOV.
  But I can't make it work.
  
  Basic example on
  
  http://Apex.Oracle.com/pls/Apex/f?p=4500:1000:15922477788607
  workspace: blobvideo
  user name: admin
  password: fremantl3
  
  Application: video blobbing
  page: 4
  
  Feels like I have to do something stupid, but I don't see what.
  
  See you soon
  Mark
  
  (PS apologies for the user name empty. Apparently, it takes 6 hours to go to what I put it...)
  
  Published by: 946028 on October 9, 2012 03:07
  

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• NULL point Exception: when we try to insert data with the procedure after obtaining values of the iterator.

  public String submit() {}

  BindingContext bindingContext = BindingContext.getCurrent ();

  DC DCDataControl = bindingContext.findDataControl("AppModuleDataControl");

  AppM AppModuleImpl = (AppModuleImpl) dc.getDataProvider ();

  BindingContainer links = getBindings();

  OperationBinding operationBinding = bindings.getOperationBinding("getCAL");

  Object result = operationBinding.execute ();

  String dte = result.toString ();

  Model CollectionModel = (CollectionModel) classHeldTbl.getValue ();

  ROWCOUNT int = model.getRowCount ();

  for (int i = 0; i < rowcount; i ++) {}

  JUCtrlHierNodeBinding = (JUCtrlHierNodeBinding) model.getRowData (i) rowData;

  If (rowData.getAttribute (8)! = null) {}

  int slotId = Integer.parseInt (rowData.getAttribute (5) m:System.NET.SocketAddress.ToString ());

  int sectionId = Integer.parseInt (rowData.getAttribute (6) m:System.NET.SocketAddress.ToString ());

  int teacherId = Integer.parseInt (rowData.getAttribute (7) m:System.NET.SocketAddress.ToString ());

  String rowData.getAttribute = chk (8) m:System.NET.SocketAddress.ToString ();

  If (chk.equals ("true")) {}

  try {}

  System.out.println ("dateee:" + result + "id Teachr" + teacherId + ETD + "" + slotId + "" + sectionId);

  appM.submitClassHeld (teacherId, dte, IDEmplacement, sectionId);

  System.out.println ("After proc");

  } catch (NullPointerException e) {}

  System.out.println ("-Execption" + e.getMessage ());

  }

  }

  }

  }

  Returns a null value.

  }

  There are no issues with values... This function works only once. When we submit the values on the selection box it works once, but when press us the button submit again select different box it inserts the value in the database, but on the page shows null pointer exception.

  RowData are so is equal to null.

  Change this line in the following way:

  System.out.println ("rowData =" + rowData);

  If (rowData! = null & rowData.getAttribute (8)! = null)

  and lat me know what happens

  JohnMackanzi wrote:

  Number of line 58

  If (rowData.getAttribute (8)! = null) {}

• Visualization of more values on the graph of the DAQ card

  Hello

  I acquire a Signal using the data acquisition card, the problem is that I can view only a few values on the graph of a waveform. Guide kindly of me if I want to see the points more on the graphical waveform, what I would do in my programming window.

  Concerning

  I think that you just want to use a TABLE instead of a chart.  A graph has an associated history, so that it shows more that just the last data series acquired you and wrote to the curve.

• The research of data points in a cluster

  Hello.

  I'm using LabVIEW 2013 to myRIO. IM facing a problem with the implementation of a few things with the clusters.

  Problem statement: coordinated map recorded for a GPS on a map and the use of the cursor functionality to check the value of the various sensors on different parts of the track.

  I was able to map the contact information stored on a card in LabVIEW. I create an array of the coordinates, to group and then move them to an XY Chart. Cursor has also been implemented. I click on the map and drag my mouse and it takes me to different coordinates.

  What I can't do, is show other data senors for the coordinates x, Y.

  My plan is to consolidate all the data from sensors in a cluster, and then try to find the cluster for the necessary points of X, Y.

  How a search within a cluster by specifying only X, Y

  for example: I give to X, Y and I get the value of all the sensors for this pair x, Y?

  Thank you

  
  

• What happens after that reset the card (from the point of view JCRE)?

  Hello
  
  In the windows environment, to maintain the State of application, I cam imagine that data is serialized and saved in a text file. The second call of app, the data in the text file are reloaded to reconstruct objects and form the latest state of the application.
  
  In the middle of the map, suppose I have a few cmdlets on the map. Reset of the card, I think the boot trap method is invoked and reload the data for each applet to keep state.
  
  The point is, to load data, everything is done in native code, but objects to be re-inited run java layer. Is this feasible? Or JCRE will initialize the applets in java layer?
  
  Could you correct my understanding and share your knowledge on something else after reset of the card? Or after reset of the card, JCRE does nothing, objects inherit from its reference, the class structure of the map features?
  
  Thank you
  
  Mike

  They are delivered to the default value for this type (0 or false).

  See you soon,.
  Shane

• You use the zoom of the band to select all the data points in the Strip

  I feel stupid this morning. I am a new user with 2011, but have not figured out how to copy a portion of the data. I can use the 2D axis system view to view my data. Can I use zoom band to get the part I need, but for the life of me I can't seem to copy the part. I put at the beginning and end and other flags, but the best I have is the starting point, one no point value and the end point. I don't get all the points between the flags. Am I supposed to mark somehow all the points in the zoom view? I did a search, but may not know what I am doing wrong.

  Robert

  WOW! If simple, yet I kept missing it. There is a difference between "Band Zoom" and "band of cursor. Thank you very much! Feeling little sheepish here now .

  Robert

• Spread the data point for many consumers? I'm probably overload it.

  Please see the attached screencap.

  The DAQ assistant, in the first case structure takes a lot of steps from a local cDAQ chassis.  One of these points of data (#15) must be extracted (where the signal selection) and then merged with the signals of three remote (ethernet connected) chassis.

  The question that I have, it is that the point of data, due to the fact that the chassis and consumers are not running in a specific order or sync, sometimes just is not there when consumer loops run and it reads a 0 instead of the value.  This causes the test bench to think that he loss of hydraulic pressure and calling for a stop.

  I know someone will tell me over the error of each DAQ assistant to another, but that creates a second 6.5 massive loop time, which is unacceptable.  The chassis must stay independent to reduce the execution time.

  I'm looking for a way to 'catch' the #15 data point and hold down for consumers to use until the next iteration where it is replaced by the new value.  I don't know if the collector is what I'm looking for, a sort of copy of data or a registry.  If he was an automaton, I would like to know what to do with it.

  Thanks in advance.

  You need a registry change around your loop (with the right button of the border of the while loop). This provides a way to save a value to an iteration of a loop with the next iteration. When you read successfully a new value, use that; When you do not, use the value of the work to register.

• Display the name of the tag as the column name and the value in the tag as a row of data from the input string.

  Hi Forum members,

  I am looking for a query display the name of the tag as the column name and the value in the tag as a row of data.

  I have to print the values within the tag to a file by choosing the value of the flags. the sequence of the tags will vary each time, as the tag name will change dynamically.

  So here is the example of input data and the expected output. The string in the text column must be separated as the column names and values.

  Input data
  Select 1 as seqno,' < > 0210A 50 4f < / 4f > < 5f20 > TEST CARD 16 < / 5f20 > < 5f2a > < / 5f2a > < 82 > 1 c 00 < / 82 > ' double text

  
  Output:

  Seqno 4f 5f20 5f2a 82
  0210A 50 16 1 00 TEST CARD 1

  Please help me by providing your entries on this.

  We use the version of Oracle 11.2.

  Note: This is not the XML string

  Thank you

  Shree

  with

  data in the form of

  (select 1 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2a><82>00 1' text of all the double union)

  Select 2 as seqno,'XYZ<4F>0210 A 50<5f20>TEST CARD 16<5f2a><82>00 1' text of all the double union

  Select 3 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2A><82>1 00XYZ ' text of all the double union

  Select option 4 as seqno,'<4F>0210 A 50<5F20>TEST CARD 16<5f2A><82>1 00XYZ' double text

  )

  Select d.seqno, x.*

  d the data,

  XMLTable ('/ root')

  by the way xmltransform (xmltype ('': replace (replace (text,'<><>'),)))

  XmlType (q'~http://www.w3.org/1999/XSL/Transform "version ="1.0"> ")

                                                   

                                                     

                                                       

                                                     

                                                   

                                                   

                                                     

                                                       

                                                     

                                                   

  ~'

  )

  )

  path of columns '4f' varchar2 (10) "tag4f."

  path of "5f20' varchar2 (30)"tag5f20. "

  path of '5f2a' varchar2 (10) "tag5f2a."

  path of varchar2 (10) "82" "tag82.

  ) x

  
  

  SEQNO	4f	5f20	5f2a	82
  1	0210A 50	16 TEST CARD	-	1 00
  2	0210A 50	16 TEST CARD	-	1 00
  3	0210A 50	16 TEST CARD	-	1 00
  4	0210A 50	16 TEST CARD	-	1 00

  with

  data in the form of

  (select 1 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2a><82>00 1' text of all the double union)

  Select 2 as seqno,'XYZ<4F>0210 A 50<5f20>TEST CARD 16<5f2a><82>00 1' text of all the double union

  Select 3 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2A><82>1 00XYZ ' text of all the double union

  Select option 4 as seqno,'<4F>0210 A 50<5F20>TEST CARD 16<5f2A><82>1 00XYZ' double text

  ),

  Chopper (seqno, Key, value, String) as

  (select seqno,

  regexp_substr (text,'<(.+?)>', 1, 1, null, 1),

  regexp_substr (Text,'>(.*?))

  regexp_substr (text,'<.+?>. *? ) (.*) $', 1, 1, null, 1). » <>'

  from the data

  Union of all the

  Select seqno,

  regexp_substr (String,'<(.+?)>', 1, 1, null, 1),

  regexp_substr (String,'>(.*?))

  regexp_substr (String,'<.+?>. *? ) (.*) $', 1, 1, null, 1)

  Chopper

  where regexp_substr (string,'<(.*?)>', 1, 1, null, 1) is not null

  )

  Select '4f', seqno, '5f2a', '82', '5f20.

  of (seqno, lower (key) select key, value)

  Chopper

  )

  Pivot (max (value) for key in ('4f' as '4f', '5f20' as '5f20', '5f2a' as '5f2a', "82" as "82"))

  Concerning

  Etbin
  

• Dynamic action to set the value of the point of Application

  Hello
  I want to display a form button that sets a value of the point of Application. Can someone please help and guide how to proceed?
  
  The requirement is, the user will receive a report, they can change a record and a button will allow him to SET the record for the session. When it accesses a different page within the application, they will see that the data relevant to the record that is DEFINED.
  
  Thanks in advance
  Aali

  Hi, Estelle,.

  You can use the dynamic action 'Code from PL/SQL Execute' to fix your application. For example, your code might look like

  begin
      :G_DISPLAY_MODE := :P1_DISPLAY_MODE;
  end;
  

  Page items to submit: P1_DISPLAY_MODE

  P1_DISPLAY_MODE would be the element on your current page where you select the desired value.

  Hope that you give something to play with.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Pass the value of the date to another element on a page to another

  Hello
  
  On one page, I have a hidden item that stores the sysdate.
  
  I want to spend the date value for this point to another hidden on another page in the format DD-MON-AA HH24:MI:SS.
  
  It seems impossible because Apex puts time value in the url with a colon, which is used as a delimiter, so all I get is HH24 JJ-MM-AA... and I lose all the following values that should be passed as well.
  
  for example
  
  25 JANUARY 11 11:03:25
  
  is passed as
  
  JANUARY 25, 11 11
  
  Any ideas to overcome this problem.
  
  was soon Paul
  
  Published by: ent on 31 January 2011 01:40

  Hello
  Another way is to write before the process of the header (or perhaps computing will be better) on the page of the item target, which gets the value of the source element, turn it into something as you wish and sets target the value of the element.

  Jirka

• How to validate the Date value in the text column

  Hi all
  
  I entered DATE value in the element of text field (Char Data Type), now how do I validate, the entered date is valid or not.
  
  Thanks in advance.

  Well, the easiest would be to make the part of DATE data type.

  Another possibility is to try to convert the value to a date in the WHEN-VALIDATE-POINT-trigger, as

  DECLARE
    dt DATE;
  BEGIN
    dt:=TO_DATE(:BLOCK.ITEM);
    -- if code comes here, the date is valid
  EXCEPTION
    WHEN OTHERS THEN
      -- seems to be no valid date
      MESSAGE('Error');
      RAISE FORM_TRIGGER_FAILURE;
  END;
  

  Published by: Andreas Weiden on 19.12.2010 12:23