variables in the rule engine

Similar Questions

• Link to the variable of the scan engine

  I have the attached labview, the settings on a variable diagram and shared block.  In my project I have a cRio who is using the analytical engine and signals some time RTD.  in my computer, I have a shared variable that I have an alias to the scan on the cRio engine variable.  I thought that this would then make the variable shared on myComputer would report to the same as the engine to scan on the cRio variable; However, this is not the case.  In the front, you can see I get 0 for the myComputer shared variable while getting the correct value of the variable of cRio scanning engine.

  Binds a variable to a variable of scan engine means that it will keep the same value?  I have to do something more?  I want to do it this way because I have a VI that find all the variables in the file SystemParameter.lvlib and did things with them.

  

  Hey GreenRiver

  If I understand correctly, you bind the network variable to the ProcessInRTD indicator. If you put this code in a while loop with a stop button, what happens? You can have a race condition here, where he reads the network variable and puts this indicator and then reads the temperature of the unit and who refers to the indicator of RTD.

  A suggestion I have is just wire the output of IO functionality in the network within a variable period of time loop. Then, on your host VI, read the network variable.

• Access rule to the rule-driven event Variables

  Hello!

  Background:

  Here's what I'm trying to do: I was hoping someone might be able to help me with this.

  I created an event rule without a scope that will be sent, if the name of the event contains a prefix set, as follows;

  {if(@event_name.) Contains ("MYFILTER_")}

  Returns true;

  } else {}

  Returns false;

  }

  The action is a command line action that activates a special probe in SNMP before that we have installed on the server.

  The problem:

  I want to access a variable in the variable filter rule. Essentially, EACH rule containing MYFILTER_ as a prefix has a variable defined as a variable of @callGroup RULE. This variable considers the specified parent service and tire part of the name of the service that we have designed to be always the band guard for this alarm/event.

  The solution that I'm looking should look like this:

  On the event rule:

  Variable: callGroup

  Type: Expression

  Value of the expression: @event.get ("callGroup");

  On the MYFILTER_ rule:

  Variable: callGroup

  Type: Expression

  Value of the expression:

  def foundParent = false;

  targetService def = 'unknown ';

  i = 0;

  While (i< scope.parents.size()="" &&="">

  obj = scope.parents def;

  {if (obj.topologyTypeName.Equals ("FSMService"))}

  If (obj. Name.Contains(":") & obj.name.contains("-")) { //This is the regular expression to our designated 'parents services' }

  targetService = obj.name;

  foundParent = true;

  }

  }

  i ++ ;

  }

  {if(!foundParent)}

  for (x = 0; x

  for (y = 0; y)

  obj = Scope.parents [x] .parents;

  {if (obj.topologyTypeName.Equals ("FSMService"))}

  If (obj. Name.Contains(":") & obj.name.contains("-")) { //This is the regular expression to our designated 'parents services' }

  targetService = obj.name;

  foundParent = true;

  }

  }

  }

  }

  }

  originService = targetService.split(":");

  parentService = originService [0];

  Return parentService.split ("-") [0];

  Bottom Line: How can I access this other value or a variable existing rule from the interface of event action rule?

  access to the content of the rule Variables is unfortunately not possible by using the generated alarm or event driven rule.

  But I think you can use the same rule of expression led to the event. The only problem is that your event driven rule is not you need to replace worn with

  Server. TopologyService.getObject(@event.topologyObjectID)

  Like this

  def scopedObject = server.TopologyService.getObject(@event.topologyObjectID)  // use the @event to find the alarm scope !!!
  
  def foundParent = false;def targetService = "unknown";
  
  i=0;while(i < scopedObject.parents.size() && !foundParent){  def obj=scopedObject.parents;  if(obj.topologyTypeName.equals("FSMService")){    if(obj.name.contains(":") && obj.name.contains("-")){ //This is the regex of our designated "parent services"        targetService = obj.name;        foundParent = true;    }   }  i++;}
  
  if(!foundParent){  for(x=0;x;       if(obj.topologyTypeName.equals("FSMService")){                  if(obj.name.contains(":") && obj.name.contains("-")){  //This is the regex of our designated "parent services"           targetService = obj.name;           foundParent = true;         }       }     }  }}
  
  originService = targetService.split(":");parentService = originService[0];
  
  return parentService.split(" - ")[0];
  

• The use of variables in the Calc scripts and business rules

  I'm sure that there have been previous discussions on this topic, but can anyone let me know the benefits of using variables in scripts of Calc and BRs?
  
  Thank you
  A

  I've never used variable Calc and after reading a guide to the study, which has talked about them, I didn't really understand the benefits.

  ^ ^ ^ I use variables all the time to make difficult abstract formulas. Here is an example.

  /*     Declare variables     */
  VAR varSalaryCosts ;
  VAR varProdOHLabXXXX ;
  VAR varXXXX ;
  
  A whole bunch of code here along with very limited FIX statement and then...
  
  "Salaried Labor"
  (
       varSalaryCosts = "Salary Costs"->"No Department"->"No Category"->"Salaried" -
                           "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                           "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                           "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried" ;
       varProdOHLabXXXX = "Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"TTTT"->"Codes"->"Salaried" ;
       "Salaried Labor" = varSalaryCosts * ("Number of Employees"->"Salaried" / varProdOHLabXXXX) ;
  )
  

  The last formula is how the formula was described to me by the owner of the company. I find it much easier to read something like:

  "Salaried Labor" = ("Salary Costs"->"No Department"->"No Category"->"Salaried" -
                           "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                           "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                           "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried") *
                           ("Number of Employees"->"Salaried" /
                           ("Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                           "Number of Employees"->"TTTT"->"Codes"->"Salaried")) ;
  

  I used the TABLE in a calc script really-cool-but-alas-not-invented-by-me do better than planning made the conversion of currency currency conversion in planning. (How's that for a run-on sentence?) It is one of the six blog posts that I'm trying and I will end it soon, I hope. I am now thrash mode. It doesn't have its uses and I'll try to remember to update this thread when I'm done.

  Kind regards

  Cameron Lackpour

• How to prevent to arise after Google Identifiez_ google search you? I want to avoid that information additional poping up whatever the search engines.

  Regardless of the search engine: after research adding information associated with the search engine appears below the toolbar. Example: For searches on Google, I get a Google sign in and a button with an additional search bar apps.

  Hi ev2163, this is normal. This is the page of Google for Firefox. The results page is perhaps different chrome because of the intimate relationship of Google with himself.

  There are a lot of things to change the appearance of web pages, and if you really want to remove this upper area from the results page, you can use several techniques:

  (1) Add on versatile such as remove it permanently, allowing you to select areas of pages to hide

  (2) custom style rule (this can be saved in a file named userContent.css or can be applied using the Stylish extension)

  (3) personalized userscript (a script that runs in the Greasemonkey extension to edit selected pages)

  Maybe Google has an option somewhere to change? But I never saw one.

• Programmatically create an appointment: missing variable in the container of result

  Hello world

  For my purpose of tests, I need to programmatically create a sequence. In this sequence, I need to insert steps from Rendezvous.

  Everything works very well when they are created, but when I run the sequence / stages created this error always appear for the appointment stage:

  • Unknown variable 'TimeoutOccured '; Error in the item "Result.TimeoutOccured".

  According to using TS, this variable must be created when I set up stage of the operation to date. Drag and drop step of inserting TS palette works very well, and the variable is created when you select the operation "appointment". But when you do the same thing through programming, the variable is not created.

  Here are the steps performed to create the Appointment stage:

  1. I have create a new step by using the Engine.NewStep method
  
  
  2. I put the name of the step using Step.Name
  
  
  3. I put the properties of an appointment using a statement (Parameters.BranchesRendezVous.RDVStep is the variable holding the reference of step):
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.Operation = 1, //A value that specifies the operation of the step to perform. Valid values are 0 = crΘer, 1 = Rendezvous and 2 = Get Status
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.NameOrRefExpr = Parameters.BranchesRendezVous.RefName, //Contains the expression name Rendezvous for operation of creation and expression name Rendezvous or reference for all Rendezvous operations
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.TimeoutEnabled = False, //The Timeout allowed for the operation of Rendezvous
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.ErrorOnTimeout = True, //The Timeout causes Run-Time Error for the Rendezvous operation
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.RendezvousCountExpr = Parameters.NbBranches, //The expression number of Threads by appointment for the create operation
  
  
  • Parameters.BranchesRendezVous.RDVStep.AsStep.Lifetime = 3, //A value that specifies the lifetime setting to use for the create operation. Valid values are 0 = same as sequence, 1 = even as a thread, 2 = use reference object, and 3 = same as execution
  1. 4. then I insert the step in my current sequence by using the Sequence.InsertStep method

  Everything works fine, the appointment stage is perfectly created and all the properties are set finely. However, the TimeouOccured variable is missing in the container Step.Result (help says TS that this furniture exists when the step is configured as a date (see operation = 1)).

  I'm doing something wrong somewhere? Why did this variable missing?

  You probably need to create the property programmatically using NewSubProperty().

  -Doug

• Support of the shared Variables in the third part XP embedded based of PTC?

  I sent a request in an embedded XP touch function (third party). The application works very well, but hosted on a RT (sbRIO Board) shared variables are not getting updated in the app on PTC

  1. the PTC is part of the project as a Windows XP Embedded Touch Panel

  2 NI TPC Service has been installed on the PTC and the application can be deployed remotely from the PC development via ethernet. (Where network connections and communications are OK)

  3. using distributed in the development computer systems manager, I can see that the shared variables are getting updates on the network

  I think that the problem can be solved if the following programs are installed on the TPC

  A. Support for variables that are shared for XPembedded

  B. shared Variable engine

  I tried to install the support of variables shared Program Files > National Instruments > Labview 8.6 > PDA > utilities > Variables > x 86 - but I get an installation error "cannot find the application for the Pocket PC applications Manager.

  Shared variable engine was installed from the ve220 folder. The program is installing. But the engine Variable is not start Control Panel > administrative tools > Services, Xpe, the service is stopped and cannot be started. When I try to start the service, I get the following error on PTC

  "Cannot start Service engine of National Instruments Variable on the local computer."

  Error 1053. Service has failed to demand launch or timely control.

  Please suggest solutions to the addresses above or another of the following:

  1. support of variables shared for XP built-in PTC

  2 Installer engine Variable shared.

  Thank you

  Krish

  Problem solved!

  Update for interested people working on XP Embedded PTC

  Just to ensure that shared Variables were indeed accessible to the TPC, I wanted to install Distributed Systems Manager 8.6 on the TPC. However given that the TPC was only 1 GB of DOM (disk on memory) and with all the software that I had tried, there remained only a few megabytes on the system. I had to add an another DOM of 2 GB.

  All products in the Installation went well, with the exception of the Logos NOR (Version 5.0). Logos OR installation has failed repeatedly.  I tried to install NI Logos separately, with the same results. Then I had this intuition that NI Logos had anything to do with the question.

  Then, I downloaded the new version of NI DSM 2009 SP1. Even if it were to settle on any fresh system without Labview, the installation would not proceed beyond the stage of configuration. I tried to install NI Logos of the folder on the download of new products separately and it worked magically!

  Once the new Logos (Ver 5.5) installed, the Shared Variable engine starts automatically and the shared Variables are finally unleashed - free stand up and shine! I thank Almighty God!

  On the lighter side, come to think of it - to run an application about 400 KB, we need NEITHER of Run Time, XP embedded, DSM, Logos...  (around 900 MB). Can make us everything simpler?  Invite your comments...

  Thank you

  Krish

• How to limit the rules (CPU usage) doesn't include a few servers (IP)

  Hello

  There are few servers who always raised processor and we do not generate alerts for servers, but we need to get the statistics of CPU in the FMS, is there a way I can limit the rules (i.e., the CPU utilization) to not stand for these servers.

  Thank you

  Shashank Soni.

  Hello

  You can change the definition of the rule to exclude certain hosts.

  In this example, we add a condition by saying that the does not apply to a specific host, or hosts.
  Note that you may need to replace the name of the property with the property that designates the host name.

  

  You can also check the host name in the status itself

  

  Another option you have is to find the variable being compared and it scope (give it a very high value for specific hosts.

  

  I hope this helps.

  Golan

• Action filters IPS event - adding variables in the fields of the aggressor and the victim

  With regard to the Action event filters. How do you add variables multiple events to the aggressor fields and the victim? I use a comma to separate IP addresses (10.10.1.1,192.168.1.1). When I use a variable ($inside) I have not been able to add other variables ($dmz) or IP addresses in the same filter rule. Is it possible to have two variables in the same areas of the aggressor and the victim? I would have thought $inside, $dmz might work, but I get an error. I also tried $inside\, $dmz and $inside, $dmz and $inside \,$dmz but you get errors saying variable system not found.

  What a variable is currently allowed in a field.

  There is an enhancement request to support several variables in a field, but it has not been yet targeted for a specific version.

• I can't change the rules on GBA 5.8.1.4.3

  Cisco Application Deployment Engine OS Release: 2.2ADE-OS Build Version: 2.2.2.015ADE-OS System Architecture: x86_64
  
  Copyright (c) 2005-2015 by Cisco Systems, Inc.All rights reserved.Hostname: ACS01-AAA
  
  Version information of installed applications---------------------------------------------
  
  Cisco ACS VERSION INFORMATION-----------------------------Version : 5.8.1.4.3Internal Build ID : B.462Patches :5-8-0-32-3

  I still have the problem with a blank "political access > Services > Service selection of access rules" after you apply the patch 3. Maybe because I deleted rule before, I found a bug.

  Correct, the rules are deleted before you install the hotfix.

  This State can be recovered by installing the hotfix.

  Patch will ensure that there are no other problems.

• Optimization of the rules

  Hello

  I want to know ways to optimize the modules. Can someone list on optimization techniques? Those can really fast substantially determination? Thank you

  .. and if I can close the loop on what this has to do with optimizing the performance.  This is my opinion.

  I think that when Jasmine says that the rule is a rule of 'BAD', (be careful not to speak too loudly for him) she means not only from a point of view maintenance rule.

  First, the engine optimizes the path until the OPA don't just use every bit of data 'seeds' and create a static rule execution plan.

  Consider that when you give enough forced a SQL statement in the where clause, a query may return several responses and poor performance.  OPA, however, can still make a unique determination given incomplete sets attributes of database (unknowns and might.)  OPA may provide explanations that include what basic attributes must always be provided (OPA has a forward and backward chaining).  In short, the OPA may use only a small set of basic data to determine a result, even if OPA Gets a lot of seed data. In this respect, the internal dev team Oracle OPA provides optimization performance and optimizations to the engine itself to a path of optimal execution.  This way can and will change dynamically.

  Traditionally, tuning execution path is what .net/java developers worry about and most often is the prospect that developers pull then ask questions about optimizing the performance of OPA.  So my reply may seem unsatisfactory to anyone who does not participate in effective policies of the organization.

  As a second review, OPA has strengths in optimization, modeling and optimization of the policy itself, which rarely concern of the developer.  Were necessary intermediate decisions by the company and OPA said these determinations were while they were not (perhaps due to a bad mix of procedural rules / background)?  Can reduce what is necessary for improved or new political determination or remove the dependencies of base?

  So, if politics is already optimized, then OPA will not be be slower than any other method of execution that requires the same information, but probably much, much faster.  So I think that Brad question above...

  A developer usually should not change the policy, but policy changes can have the most impact on performance for the end user and the business.  Jasmine guidelines provide something of a foundation on the writing of strategy using proven methods of political organization / readability.  This provides visibility into changes policies to non-developers. Thus, when you create policy documents, we (or at least I) follow the guidelines, devote an extra effort to exploit the isomorphism of the OPA and make political visible to policy work.

  It's observation, and I speak in generalizations.  (Once the policy is well written, btw, if I have a problem which is not now obvious, so I just call the engine for the intermediate attributes know where my problem lies - that I should have for test cases in Excel and/or SoapUI.)  Be careful, however, as the need for optimization of performance may indicate really need something else entirely...)  If the answer is still not satisfactory, although I hope not, is there a policy statement of example and source documents that can be provided to get advice on the setting?  -I would recommend starting a new thread in the forum for this.

• Priority of the rules with dynamic content

  Does anyone know how the rules have priority in dynamic content?

  For example, I have three rules: content, content for designers and content developers default. If a person is designer and developer, I want to send them the content developer.

  Any ideas?

  -If anyone knows how to add names to the rules too, would be great. They are currently all record as "rule 1" "rule 2"... ".

  Thank you!

  The engine follows a short-circuit evaluation. It begins with rule 1, then goes to rule 2, etc.. The first rule is a football match is used. If no rule is met, then the default value is provided.

  I agree, it would be nice if the rules have been appointed. Please create it if it is not already there in the exchange of ideas!

  Aaron.

• Acrobat CC Mac - not Visible when moving the ruler guides

  Hey Adobe,

  I just installed the latest version of Acrobat DC 2015-2015.010.20056 and ruler guides are not visible when chatting them the rule or moving them on the page. When is this corrected?

  This was recorded by one of your employees on forums like bug back in July 2015 and then was 2 updates since then. It is a big problem for those of us who use Acrobat on the Mac, especially when checking PDF files for production.

  Please let know us when you will correct this bug simple but obvious - please.

  Hi all

  Bug # 4021387 has already been registered for this and the engineering team leans on it.

  Kind regards
  Rave

• Adding to the rule of file system capacity

  Hello

  The ability of current file system rule resembles the current % used and compared to a registry variable.   My team of storage request that I change the rule.  They wanted to be able to specify a more granuilar % as 99.5% for criticism or 99.2% for warnring (for specific disc) it's because these drives are very large.  However, it seems that the default metric is supported only integers... .such as 99%.

  That said my next idea was to change the alert rule that if the player was at 99% and had to say less than 1 GB of space... for example.  In this way, he would not be a problem for smaller and larger discs would have a second check.  However I don't know how to change the condition to achieve this result.  That's what brings me to yall.   Thanks for any help in advance

  Here is the current status for the warning

  test = true;

  for {(obj in scope.detail)

  If (obj.topologyTypeName.equals ("AccessInformation")) {}

  test = obj.writable;

  }

  }

  If {(test)

  return #capacityUsed # > = registry ("INF_FileSystemCapacityWarning");

  }

  Returns false;

  You can create your own registry variables and make double whole vs. and those who use instead.  With respect to the addition in the available space, you could manually set or use a registry variable.  There is space in MB.

  test = true;

  for {(obj in scope.detail)

  If (obj.topologyTypeName.equals ("AccessInformation")) {}

  test = obj.writable;

  }

  }

  If {(test)

  return #capacityUsed # > = registry ("INF_FileSystemCapacityWarning") & #spaceAvailable #.<=>

  }

  Returns false;

• Error of the rendering engine

  My ae_render_only_node.txt file is active on the positions of rendering engine. However, I get this error message in the render farm:

  > > > after Effects error: < < < could not get a license. Run the complete application to correct the problem or get a more detailed message.

  Adobe told me that I need not allow the workstation of rendering engine in order to make the machine.

  I am able to open the rendering engine outside the farm of rendering with no problems.

  Any suggestions as to what is causing error in the render farm? I use Smedge as my firm rendering application.

  My assessment is that renderers nodes fail to launch because of this error, but the error of license they are back is somewhat misleading (failure occurs before the licensing of completed audit, that's why reporting that the license check failed, even if this isn't the cause of the problem).

  The only trace I can find that carries specific error on you try to run a script file in After Effects via an AppleScript "DoScript" call. I have my doubts it's what you do (especially since you're on Windows), but the text of the error indicates that a script is called and it is unable to assess. So, questions:

  -You have scripts in the Scripts/startup folder? Remove them affect the problem?

  -Are there a difference in how Smedge called machines problem and those who only reports the error? Is there a different set of variables, or a different path, etc. ?

  I'm not familiar with how Smedge calls After Effects to run it. (I assume that the execution of a command line). If you are able to launch successfully the outside Smedge rendering engine, you can contact them for more information on this track.