Variables must be initialized error

Similar Questions

• The system is unable to boot automatically. The BOOT environment variable must be set to a bootable image.

  Hey guys

  I need help, in my company trying to learn switches I flashed my switch all :(

  I now get this error

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  I downloaded the c2950-i6q4l2 - tar.121 - 22.EA14.tar for the switch, but I'm unclear on how to load the catalyst 2950 only

  switch: dir flash:
  Directory of flash: /.

  3 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch: start
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...
  switch:

  C2950 Boot Loader (C2950-HBOOT-M), Version 12.1 (11r) EA1, RELEASE SOFTWARE (fc1)
  Updated Tuesday 22 July 02 17:18 by antonino
  WS-C2950-24 from...
  Basic Ethernet MAC address: 00:15:2 b: 46:7 b: 00
  XMODEM file system is available.
  Initializing the Flash...
  flashfs [0]: 1 files, directories 1
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 7741440
  flashfs [0]: used bytes: 1536
  flashfs [0]: available bytes: 7739904
  flashfs [0]: fsck flashfs takes 4 seconds.
  .. .done boot flash.
  Boot sector file system (bs :) installed, isfd: 3)
  Setting Filesystem block (pb :) installed, isfd: 4)
  Loading ""...: permission denied ".

  Error loading «»

  Interrupt within 5 seconds to cancel the startup process.
  Boot process failed...

  The system is unable to boot automatically.  The BOOT
  environment variable must be set with a bootable
  image.

  switch:
  switch:
  switch: flash
  Initializing the Flash...
  ... The flash is already initialized.
  switch: dir /.
  Unknown cmd: dir /.
  switch: dir

  List of currently registered file systems:

  Flash [0]: (reading / writing)
  XMODEM [1]: (read-only)
  NULL [2]: (reading / writing)
  BS [3]: (read-only)

  switch: 0
  Unknown cmd: 0
  switch: flash_init
  switch: load_helper
  switch: dir flash:
  Directory of flash: /.

  2 - rwx 269 env_vars

  7739904 bytes available (1536 bytes used)
  switch:

  Hello

  It seems that the image is not in the flash memory. Do you know where you downloaded the image? Once we know, we can understand what statement of startup, you need to do to make it start correctly.

  Thank you

  Garrett

• Variable is not initialized

  Maybe it's a newbie question, but why does my input variable to my call to enqueue AQ have a warning about it "the Variable is not initialized"? The stage before it's a transformation that must fill in the data of a variable to this input variable.
  
  I checked the variables in the bpel file and they seemed ok. The transformation looks like the following and is almost a straight copy as the two schemas have the same elements.
  
  & lt; assign the name = "Transform_FacilityStoreToEnterpriseStore" & gt;
  & lt; bpelx:annotation & gt;
  & lt; bpelx:pattern & gt; transformation & lt; / bpelx:pattern & gt;
  & lt; / bpelx:annotation & gt;
  & lt; copy & gt;
  <from expression="ora:processXSLT('Transformation_FacilityStoreToEnterpriseStore2.xsl',bpws:getVariableData('Invoke_FacilityGetStoreByStoreNumberAndStoreType_GetStoreByStoreNumberAndStoreType_OutputVariable','parameters'))"/>
  & lt; variable = "Invoke_EnterpriseStoreDataChangedEnqueue_EnterpriseStoreDataChangedEnqueue_InputVariable."
  part = "Store" / & gt;
  & lt; / copy & gt;
  & lt; / assign & gt;
  
  Any help would be appreciated.

  Try to test your transformation separately,

  See: http://otndnld.oracle.co.jp/document/products/as10g/1012/doc_v3/integrate.1012/B14448-01/html/xslt_mpr.htm

  Section: 15.6 step 3: test the map

  It is a great help when debugging transformations.

  Sash

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx

• "A value must be specified" error from Eclipse

  Compiler Eclipse continues to give "a value must be specified" error. In the Blackberry_app_descriptor.xml file, I did as much as I can. but still.

  Any thoughts? Thank you.

  It turns out that the 'output file name' attribute was absent from Blackberry-App-Descriptor. After you have added that the error has disappeared.

  I had to use a XML editior. Read the file with Eclipse, many parameters do not appear.

  Not sure what I did wrong to cause this attribute is not present, but at least it works now

• PLS-00201: identifier ' FND_GLOBAL. User_id' must be reported error

  Hello!
  
  I use 10g DB (like my access system), EBS 11.5.1
  I created a trigger (before_update) with the line
  : new.last_update_by: = fnd_global.user_id;
  but get the error PLS-00201: identifier ' FND_GLOBAL. User_id' must be reported error.
  
  Please help out me.
  Elmer

  It's been a while since I've done the triggers with the E-Business Suite, but it might be a requirement to have the trigger in applications rather than your custom schema schema. The apps schema should have full access to your custom schema (which he would get if the schema is correctly registered by using the form).

  And the other question, I would ask why you need it... Why don't your custom code to do this update systematically. You should also read Thomas Kyte stuff on the triggers.... (asktom.oracle.com, search for triggers).

  Best regards, Ivan

• Shared data varying variable published network write error

  In my project in real time, on the VI host running on my Windows PC, I try to write in a number of published network shared variables.  All these write operations are successful (which means that I can read them on the RT target, then a cRIO-9012), except for these shared variables network-published with data type defined as Variant.  I'm not sure what is causing the problem.

  I take the table of clusters shown here...

  

  .. .and going through one "in Variant' VI and then subsequently in writing to the shared variable (data type: Variant).  Diagnosis of the failure of the VI in real-time to read the data, I found that variable writing shared on the host VI produced the following error:

  Error - 2147467259 appeared to Variable shared in the PC host TTS CTRL.vi

  Possible reasons:

  LabVIEW: Unspecified error (Hex 0x80004005).
  =========================
  System OR Configuration: Various operating default (Hex 0x80004005).

  This error or warning occurred when writing the following shared Variable:
  Shared \\My Computer\Network Variables\TC trust Array Group - network
  Shared \\128.144.90.143\Network Variables\TC trust Array Group - network

  .. where 128.144.90.143 is the IP address of the PC.

  Any thoughts?

  Sean

  I saw this post, and when I found myself with no other option, I have redefined the variables in question to the string data type and replaced all the "to variant" and "given Variant of ' functions with functions 'Flatten channel' and"The string Unflatten"respectively.  Initially, it did not work - functions "Chain Unflatten" would produce error 74, until I realized that the "data includes array or string of size? (T)"input on each 'string Unflatten" function must be set to FALSE. Wiring a constant false for each instance of "Unflatten to the string" seems to have corrected the problem.

  I have still no idea why wouldn t Variant.  Shared variables Editor allows to define a variant data type, so I guess it's supposed to?

  Sean

• Deployment complete with static Variables cRio-9074 network errors, pc with executable file

  Hello.

  I am building an application runs on a machine without LabVIEW development system and connect via the network shared a cRIO Varibles (RT FIFO). I can successfully create an installer and EXE for PC and a RTEXE for the cRio. When I run on my development computer, the application is able to communicate using variables shared without a problem.

  But, when I install my application on another computer and connect the cRIO, I get the following error when you deploy shared variables when the application starts:

  Initializing...

  Calculating dependencies...

  The checking for conflicts. This operation can take a long time.

  Preparation itesm by download. This operation can take a long time.

  Deployment 169.254.84.198

  Deployment VariableLib.lvlib\\169.254.84.198\VariablesLib (:-2147467259,)

  LabVIEW: Unspecified error (Hex 0 x 800004005).).

  Completed with errors of deployment

  I created an exception in the Windows Firewall configuration. I have included the library of VariableLib on the EXE of RT, outside and inside the exe file to c:\.

  I am downloading the SP1 for LabVIEW and Module RT and decided to reinstall all the software on my cRio.

  Any help will be appreciated.

  Hello Luis.

  Thank you very much for your help. The Variable engine OR has been and should be included in the intallation.

  I was able to get the application running. I installed the System Manager distributed on the PC without LabVIEW to control if the library has been get deployed. Using what I found that another device on the network use the same IP address as the cRio and so the IP address has been lying to the deployment, but the device has returned an error. I just changed the IP address on the cRio and I was good to go. I have not reproduced on both devices such as network shared Variables suggests on some positions, nor I needed to modify the ALIAS files on devices.

  Best regards and thanks again for your time.

• I get a must activate windows error when trying to log in. I run windows activation and it is said that the product is already activated, click ok

  I reinstall windows xp on an old pc with my xpsp2 cd. I used the key of xp on the sticker and when you restart the computer after the initial installation I got a must activate windows to continue. I went through the process on the phone and typed in a bunch of numbers and then it came up saying that windows is activated. He put me to the login screen, when I click on administrator I always get the must activate windows. When I select ok to activate it comes up saying that I must activate windows and will not let me continue. any ideas on how to solve this problem?

  You might be able to solve your immediate problem of the 30-day activation grace period has expired by resetting it. Follow these steps:

  1. If the computer can be started in a safe mode command prompt, do.

  2. at the command prompt, type this command exactly (space, caps and comma are required):

  Rundll32.exe syssetup, SetupOobeBnk

  3. restart.

  If you did it, your activation grace period will have been reset, giving you more time to work on the problem.

  Once done, please post a MGADiag report...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• 4 variables must be equal to 100% and each must be resuable

  I have 4 variables (text input boxes) which must add up to 100% before continuing to the next slide.

  I would like to see a total that the learner has entered a number in one or all text entry areas.

  I also need to reuse each of 4 variables on an interaction 2 slides later.

  Any ideas/tips/tricks are appreciated.

  See you soon!

  Value of the variable is kept automatically if you do not change it. No problem.

  This is the conditional action to be launched from the Calculate button. The next (BtNext) button is initially hidden. First decision (always) calculates the total of the four variables of the ETB. The second decision (Checkit) checks the value of the total and displayed the hidden button if the value = 100

  

  

• Value of Variable with OracleDiagent throwing error in white

  Hi all
  
  In my process I use 3 variables as input #GL_Product_code, #GL_Period_no, #GL_Year, on this basis, I need to get all the details, if I gave the white input from of the two other entries value must extract the value below in the code where condition
  .. .or product_code = nvl('#GL_Product_code',product_code) and period_no = nvl('#GL_Period_no',period_no) and year = nvl('#GL_Year',year)
  
  but when I use local agent my process of execution with errors, when I execution of his mistake to launch as variable with OracleDiagent has no value
  
  Error details
  
  oracle.odi.core.exception.OdiRuntimeException: java.lang.Exception: ODI-17506: Variable has no value: GL_VALIDATE.GL_PERIOD_NO
  
  Thanks for your suggestion...
  
  Published by: 981371 on February 11, 2013 09:53
  
  Published by: 981371 on February 12, 2013 02:28
  
  Published by: 981371 on February 12, 2013 22:10

  Give a default value for this variable as 'IS NULL' or 'IS NOT NULL' somethhing to be replaced if you don't pass any value then runt.

  Chantal
  http://dwteam.in

• iSCSI initiator error - cannot add target

  I am currently using a MD3000i in a test environment.

  The installation is very simple:

  The MD3000i is directly connected to a Windows Server 2003 (x 64 Enterprise edition).

  The management software is completely installed on this server. Only one controller is used to manage the PowerVault (partially managed)

  All default settings are used. I have configure the system according to the guide online "Board installation and configuring iSCSI" found on the installation CD.

  I get an error when configuring the Mirosoft iSCSI initiator. As soon as I try to add a port for iSCSI (iSCSI initiator properties panel-> discovery-> target portals tab), I get the following error message:

  "invalid sendtargets response text was detected.

  After accepting this error, the port is added to the list, but will not appear in the tab target, it is therefore impossible to connect to this port. The port of host iSCSI on the table and the address source on the server IP responds to ping without problem.

  At this point, I am only able to connect to the MD3000i with the out of band management and cannot access the storage in any way.

  Any help would be greatly appreciated

  Robert

  
  

• There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled error code 39.

  HP Pavilion 17 laptop

  There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.

  OT: Driver help

  Name:	PCIe Ralink Bluetooth adapter

  Error code:	39

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  What is the number of full model of the laptop?

  39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• "DBMS_LOCK" must be reported error even if pr villages are affected

  ODI: standard Edition Version 11.1.1

  I am badly struck here and not able to go further, I am getting error while executing the following load plan.

  oracle.odi.runtime.agent.invocation.InvocationException: ODI-1551: the acquisition of dbms_lock has failed with a sql exception ' ORA-06550: line 1, column 7:

  PLS-00201: identifier 'DBMS_LOCK' must be declared.

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  '. Please check if the job repository db has EXECUTE privilege on the DBMS_LOCK package.

  I can check level DB grants are already there. ( I have not found the exact schema where my filing work, I find something ODI_WORK and I think it's the only one, my working repository name is WREP, and there is no diagram with this name)

  I created a plan to charge with fake markets and its still throw the same error.

  Help you enjoy.

  Kind regards

  HESH

  Thank you SH, it is now resolved by giving privileges to ODI_MASTER on DBMS_LOCK.

• 'FIRST' must be reported error message

  Hi team,

  I have object SERVICE_TYPE

  If I run the script below it works well.

  DECLARE

  V_Service SERVICE_TYPE;

  BEGIN

  V_Service: = SA_RQA. F_ID_Service_By_ST (147685094, "SF4");

  -DBMS_OUTPUT. Put_line (V_Service);

  IF V_Service IS NOT NULL THEN

  DBMS_OUTPUT. Put_line ('w');

  END IF;

  END;

  But if I type loop error

  DECLARE

  V_Service SERVICE_TYPE;

  BEGIN

  V_Service: = SA_RQA. F_ID_Service_By_ST (147685094, "SF4");

  -DBMS_OUTPUT. Put_line (V_Service);

  IF V_Service IS NOT NULL THEN

  FOR i IN V_Service.FIRST... V_Service.last

  LOOP

  DBMS_OUTPUT. Put_line (V_Service (i) .value);

  END LOOP;

  END IF;

  END;

  Error report-

  ORA-06550: line 7, column 24:

  PLS-00302: component 'FIRST' must be declared

  ORA-06550: line 7, column 5:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  Guild me please.

  Looks like SERVICE_TYPE is not a collection type?

  Please post the result of the execution:

  DESCRIBE SERVICE_TYPE