Satellite Pro 410 CDT fan failure

Similar Questions

• Satellite Pro 410 - CDT - access the BIOS

  Please, anyone could advise if it is possible to access BIOS through a sequence of keys to change the priority of the boot to access the CD drive first. I have a damaged Windows installation and am unable to get a bootable CD of diskette or bootable to work.

  Thanks in advance.

  Hi Peter,.

  You will need access to the BIOS during system startup. DSepending on the age of your laptop and the BIOS manufacturer, the key combination may vary, but generally the following keys are used: -.

  ESC then F1 will enter the BIOS

  The F2 BIOS Setup mode

  The F8 BIOS boot mode

  BIOS F12 boot device selection mode.

  Above the keys must be held down during boot of the system, until the confirmation message usually appears on the start screen, or until the BIOS mode is displayed.

  HTH

• Search for USB driver for Satellite Pro 460 CDT

  I own an old Satellite Pro 460 CDT including enhanced Port Replicator III (P1, 166 MHz), installed is Windows 2000 SP 4.

  Manager device shows me there is a problem with the USB controllers, there is an "unsupported NEC USB-to-PCI-Openhost-Controller", the driver has not been installed by Windows. Uninstall and new material research will not change anything.

  USB is necessary for the intended use.

  Then, is less for a driver job?

  Hi, Ralf

  Problem is that this device is not supported for Win 2000 and load on the Toshiba download page, you will not find anything. I know, this unit is about 10 years old and I think you expect a little too much of this good old classic.

  If you want to use with a maximum and preinstalled well performance install support OS Win 95. For Win 95, you will find all the drivers and tools on Toshiba download page.

• How to activate the USB Port on Satellite Pro 440 cdt?

  Hello
  I have the old satellite pro 440 cdt and my problem is the USB Port.

  How can I activate the USB Port?

  Thank you

  Hello

  Without any explanation and comments?

• Satellite Pro 440 CDT - message "the disk you selected is not ready."

  I have an old Satellite Pro 440 CDT with a CD drive (no floppy more) who plays the music well, but when I type and want to save to a cd, he comes up with the message "the disk you selected is not ready. Can anyone help, because really, I'm not an irritable type and need help.

  I know it as an irrelivent bits to your problem, but I suggest that you invest in a USB key. They are pretty well the replacement disks are much more portable than a CD.

• Satellite Pro 430 CDT - boot disk problems

  I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

  I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

  I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

  If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

  Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

  Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

  Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

  Will provide you with my e-mail address later if necessary.

  Thanx

  Steve Jones

  Hi Steve

  I found the information that the device was shipped with 10 x player XM - 1502-B.

  Check this box:
  http://www.cdrom-drivers.com/companies/1066.htm

  There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

  Good bye

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite Pro A120 - cooling fan runs constantly

  Hello

  Bought a satellite pro A120 "Intel centrino duo" in January and for the last two weeks, the fan runs continuously. Even when the cold portable OS, it runs complete but even just word processing or done yesterday it runs very hot. I need to access the fan to have a look for dust etc but I couldn't for access!

  If anyone knows how that would be great. Either that or somebody can suggest any way to stop the laptop gets so hot. I tried on mode low power - without change, and it also works on different surfaces, but no change.

  Any help much appreciated. Thank you
  Dougie Freedman

  Hello Dougie

  In my opinion you should not do much and check anything because your laptop is new and under warranty. If something is suspicious to you, please contact your dealer local or much better is to contact directly the authorized services.

  Explain the situation and let it check your laptop.

• Update Satellite Pro 420 CDT to Windows 98

  I have an old 420CDT Satellite Pro I want to test my wireless router. It was delivered pre-loaded with Windows 95, but I need to upgrade to Windows 98 minimum.

  When I run the installer of Windows 98 (upgrade mode) he told me that I should update the Toshiba utility before you continue. However, I can't locate a Toshiba Utility for Windows 98. Someone can help me with this and will it put something else before proceeding?

  Sorry, but this unit is not supported with W98 and you will not be able to find a correct driver or tool of Toshiba. Furthermore, I think you expect too much of this old unit which has just 100 MHz processor speed just a bit of RAM. I'm not sure that it can work properly.

  Have you ever tried to connect wireless installation Toshiba tools?

• Satellite PRO C50-A-1E0 - failure of Windows 10 - now Toshiba Video Player is missing

  Hi all

  I've updated for Windows 10 drivers recommended by "Toshiba Service Station", all were successful outside of Toshiba Video Player. He said now "our product is not available for update!
  Any ideas? I can't download it anywhere, and the fact that I've updated for Windows 10 recovery isn't available to 8.1.

  Updates can be found here:

  http://win10upgrade.Toshiba.com/swup...=en&country=GB

  Kind regards
  Ian

  It's on my laptop Toshiba Satellite PRO C50-A-1E0

• Satellite Pro L300 - network adapter failure

  I was running my Satellite Pro L300 on a Belkin router connected to my DELL desktopsuccessfully wireless, except that sometimes the adapter on the Satellite failed and I had to restart the portable computer to restart.

  The other day I decided to reinstall windows XP on my desktop, because he soon grindingly.
  All worlks OK and I can access the internet from the desktop and my laptop is picking up the signal from the router but will not let me connect.

  The network shows under available networks, but when I try to connect it says "windows could nto connect to the WLAN.
  The network icon has a red line through it. I updated the driver and according to copntrol Panel operation.

  Am posting this from my office

  Hello

  Try this;
  -Start the console (in run, type CMD)
  -In the DOS window type; ipconfig / renew

  This should renew all your network cards and must assign the IP again.

  Using the ipconfig command, check if the wireless adapter is listed in the list.

• Satellite Pro U400 - Vista boot failure

  My 2nd nine Satellite Pro U400 (first a HARD drive failed after 1 week!) now does not start on Vista.
  Works very well for 4 weeks with upgrade original Vist Basic to Ultimate and Office 2007.

  Today on the switch on the Toshiba bar logo (with go to Setup etc.) started then replaced by Microsoft 'bar', then replaced by the arrow of the Mouse/touchpad.
  Mobile arrow on the screen of the mouse, but then nothing else, boots.

  Tried all modes of security and same problem.

  Ideas to please or do I have a 2nd 'lemon '!

  Hmm. I don't know if this problem could be related to upgrading from Vista Basic to ultimate, but nothing is impossible m.

  I think the HARD drive is not the problem as you can still start the OS startup.
  OK, the OS crashes, but if the HARD drive would be dysfunctional, then you should be able to see the 'bar' of Microsoft.

  So for me, it looks like something wrong with the operating system and therefore the use of the recovery CD would be desirable.

  Using the recovery CD would format the HARD drive, but unfortunately I really t see any other possibilities for the laptop running again.

  Good luck

• Where I find Toshiba for my Satellite Pro 480 CDT tools

  Hello everyone.
  I have an old fashioned 480 CDT, borrowed, but still works fine. Win98 works fine so far.

  The problem: the machine is urgent re-setup, but I don't have a disk for Toshiba specific tools (i.e. HWSETUP etc.) who came originally with the laptop. (But I have a Win98 CD!) Seems that they have been lost on his long journey.

  I have not found the option to download these tools from the Toshiba support pages. Perhaps I am too blind if anyone can give me a link where to download the tools from Toshiba?

  Where can I find these tools? (I found the Archive section, but where these tools are not listed :-(

  Thanks in advance.

  Martin.

  Hello

  I looked on toshiba sites after your problem and you can go to http://eu.computers.toshiba-europe.com
  the menu of Support & Download - Download Driver you might find a site to download drivers.

  In the first dropdown menu to choose ARCHIVES, there are your laptop.

  But it has only the power Advanced Mode for W98 and BIOS update download

  It seems that the 480 Pro Satellite was only shipped with Win95.

  Hope you that this will help you

  Good bye

• Satellite Pro M30 and Fan repair

  Hello
  I need help, my satellite M30 is very noise after 5 years of use. This is the only problem with this laptop.
  So I want to fix for current use.
  Maybe someone can help me fix / change the fan, I am qualified in computer repair, but I Don t know how to do with a laptop especially with mine.
  How open the chassi, what spare parts, I need etc?

  Thank you very much for the reply and help me

  Sebastian

  Hello Sebastian

  Is maybe your laptop full of dust and must be cleaned.
  After cleaning it laptop can take a new breath and material can be cooled properly.
  With an air cooling pure grill will not be blocked traffic and the fan may operate at high speed.
  Once this laptop runs much more silent than before.

  What do you think?

• Satellite pro m30 cooling fan

  Hello...
  I have a satiellite pro spm30 model, it took sirvice Center because the machein becomes Veery hot & I do not taken cooling fan at all, when I connect to the net computer frezs if I open multiple pages and he returned after a protest and continue to do it.
  Srvc.Ctr.told me your changed the mother board fan becase is bult in it.and they have updated the system bios.
  The problem still excist and still not hear the fan running at all.

  How can I test the operation of the cooling fan?
  what you recommend me to do?
  Help, please.

  CONCERNING

  Hello

  As far as I know, you can find a lot of applications to test and maintain the fan settings.
  But it is very dangerous because by using this software you change the thermal management of your laptop. These programs are not supported by Toshiba, for any damage caused by this program is not covered by the warranty.

  YOU USE THIS PROGRAM AT YOUR OWN RISK!

  The only issue is the Toshiba Service partner, but
  Contact them again.