VCB backs up data more partition VM has...?

Similar Questions

• Insert my backed up data after the system has been restored.

  I have a four-year-old desktop HP Pavilion p6226f and am on Windows 7. A few days ago I had to restore my PC to factory conditions. I backed up my data files through the process in the Recovery Manager, on 3 DVDs.

  Is there a utility on my computer that manages the process of insertion of my files on my computer?

  Thank you in advance for your help!

  Update, December 30, 2013:

  Although Jaco has been more than helpful with this issue (read the thread for lots of great ideas and he provided information), I marked by error this issue having been resolved while he was not. I don't know how United Nations brand it, if I add this note.

  I thought, when I got the link to get instructions from HP, I got everything that I had to this summary. That was not the case. So, my apologies. I shouldn't be marked as resolved until what I had followed the process to the end. I'm still stuck in the same exact spot.

  Hello

  Sorry for the inconvenience, but please, use this link. The previous link was for Windows Vista. This link is for Win 7.

  You are the very welcome.

  Happy computing!

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  12 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD processor / chipset.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. Win Pro 8.0

• "Partition recovery has been deleted" Message in creation of recovery media

  HP Pavilion 2205tx - C5j09PA #UUF G4

  Windows 8 64-bit

  "Partition recovery has been deleted" Message in creation of recovery media.

  I bought my new HP pavilion laptop G4 two days ago only and has not changed anything in the two players named drive C: for windows and D: for HP Recovery.

  now, I want to do a recovery with the HP Recovery Manager software disk.

  but it shows a Massage: "Recovery of Partition was deleted" Recovery Media creation section.

  in the recovery Partition my computer is almost full (3.26 G 25.5 G is free). so I think that there are current recovery files.

  I have not access to HP to buy recovery disk or call support.

   

  Thank you

  I don't know why your PC is saying your partition disappeared - you're right, it seems to be missing. I know that if you use the wizard to help to make your recovery disks backup copies and then ask him to remove the recovery partition to give you more space on the hard drive, it will remove the factory image HP of Windows 8 for the recovery partition and let the normal Windows repair tools.

  There are tools, but which allow you to create your own recovery partition full with these tools of Windows repair and a new image of your instalation so that you can restore from that. You can use this tool: Windows 7/8 - creator of Partition Recovery OEM available here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but it's a lot of work and it would be faster and more easy just for your data backup and restoration of your HP recovery disks made you from the support Assistant. If you did not the disks, HP can opt to send you a copy... they do not normally this but I read that some people have luck to get a free copy of HP media... otherwise, they want you to buy recovery disks ($40.00). I guess it depends on the exact terms of your situation.

  An alternative is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your entire system even with your custom programs installed, to the exact state it was when you made the backup image. (this may take several dvd) I suggest that you go down that road because your system with Macrium Reflect restore is much faster than restoring from the HP recovery discs. Even if you do not get another copy recovery disks, you must use this tool to make another backup that you can customize to your liking. Your re - installs will be faster, they will already have your chosen installed software, and you will save wear on your HP recovery disks.  You can then delete the recovery partition to regain this space on your hard drive (since you cannot access in all cases, you will not need this space being taken up).  BUT... you cannot restore Mode UEFI which is what HP comes with. You have to go into your Bios settings and switch in the Legacy Bios mode (which disables the secure boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re - installs you can go back into the bios settings and disable bios Legacy and reactivate if secure boot you want. (Windows 8 charge mode UEFI bios active secure boot or Legacy mode... it's your choice.) UEFI mode will load faster, but it will cause problems if you want double boot the system with another OS) hope this helps.

• Trying to format a partition that has an extra on BONE. I can't click on the format of ideas?

  Unable to format drive

  trying to format a partition that has an extra on BONE. I can't click on the format of ideas?

  Hi Dave2474,

  I recommend to format from the disk (disk operating system) otherwise, it will boot entry.

  Note: Make sure that you back up important data before formatting the disk.

  You can also view the article mentioned for more information below:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  Data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Hope this information helps.

• Update deleted 9.3 health data, more prevents the collection of new data

  I have updated to 9.3 instantly for my 6 s the first day. The health app immediately removed all the measurements taken nearby, and flights climbed data.

  I thought it was an unfortunate decision to reset the data with the update and that he met now new data in the future. This is not the case. Health app refuses to collect new data for markets, distance, or flights is mounted. These are the only items I placed in my dashboard.

  I restarted the phone, I held the sleep and home button to reset the phone, I force restarted the application. I took the items on the dashboard, rebooted, and then put back them in the dashboard. Nothing has changed, health app is not always follow these data more.

  I have a Apple Watch matched, disconnection of the Watch has not changed health tracking app data.

  Today, I noticed another problem. Data on health won't save "Me" info. Birthday, sex, blood, nothing. I enter and I entered the data are erased as soon as I look elsewhere and return to check.

  All of the following to try ideas?

  Other patches attempts: Genius Bar said reset all settings would do the trick. There can be no.

  This evening I restored the iPhones be 6 s and set up as a new phone and then reinstalled every app I had before, more reconfigured all my settings as before (recreated the Touch ID, readded Apple pay credit card, re each alarm password for all applications that need them). HE FIXED. Took hours if.

• How to back up data from the iphone water damage over 6 sec.

  I dropped my iphone more than 6 s in sea water, and it seems capable of lighting (which shows a black screen). I'm trying to back up data. When I connect the iphone with the computer, the following prompt box appears on itunes. Now I'm confused. Could someone answer my questions please?

  1. This means that my iphone is still able to turn it on?

  2. that means that only the screen is broken and the motherboard still work?

  3. How can I save the data without entering the password by using the touch screen?

  Thank you very much.

  

  This means you should STOP PUTTING ELECTRICITY through your phone untreated, ack!

  Your phone has a display problem, but yes - it lights up.
  Perhaps your problem is just a bad screen (which is unfortunately a part of $250 to a 6 sec more now).  Apple cannot help you with other water damage that offers to sell you an iPhone refurbished for $349.

  But most likely, your problem is also on the logic board - usually fixable.

  There is no way around the need for touch operation and the image on the phone to access the data.

  In order to access the data on the phone, you need your advice to hold the power and start, (it does) you need of your screen image lines, and you need to contact work.  Ideally, you would also have your backlight lines works as well.

  Most of the phones in this condition have a pretty good shot in data recovery in this situation - touch, and line of the image problems are usually solvable if your phone can be detected by iTunes.   It is certainly not DIY work, this is a troubleshooting open-ended the microsoldering and level of card issues.

  Your only option for recovering data would be to find a good microsolderer experienced in data recovery.

  I recommend to replace any phone which has seen water, corrosion on the Board always weakens solder everywhere, so the phone is likely to have a shorter duration of life more problematic.

  Note: It may be possible to cancel your option for the swap of OOW $349 at Apple if you continue recovering data at the level of Council - although I've never seen this happen.

• Upgrade to a recent version of Thunderbird, I can't filter my search by date more.

  Upgrade to a recent version of Thunderbird, I can't filter my search by date more. The date format lost slashes (' 31/12/2014'-> '31122014') and date filtering doesn't work anymore, the filter seems to be non-existent.
  I right click on the Inbox folder and the search window opens as an attachment. No date filter whatsoever is applied.
  It is used properly before work.
  I also checked the settings/options of date format, but they seem to be properly defined exactly as before (according to the Italian standard DD/MM/YYYY).
  We run windows 7 and the Italian localization of tuberculosis, the most recent version.
  It's the same thing to my colleagues (we use Thunderbird in our office), and I checked that this change took place only who has auto-update function on. Once you update, you lose the ability to search by date criteria.
  Hope you can have a few clues about this problem, this proves to be quite annoying because it takes a lot of previous messages in search by date.
  Thanks in advance,
  Walter
  Italy

  You will open everything: config and check that mailnews.search_date_format has.
  Mine is the default = 0 and that gives 2015-04-30 (for me)
  (Tools / Option / advanced/general / config editor and search for this entry)

  Edit
  I tried a few variations. Take a peek inside

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon

• How to get back my data for the health and the watch Apps once I've restored my phone?

  How to get back my data for the health and the watch Apps once I've restored my phone?

  From the backup, you're going to be restoration.

  If you back up to iTunes, make sure that it is an encrypted backup.

• HOW TO BRING BACK THE BROWSER MORE OLD?

  REVISED ORIGINAL QUESTION =
  AFTER ALL THE ~ through the MESS you created and YOU in ME SAYING that "in order to have a chance to get the answer to my question ~ to give you ALL THE DETAILS I can ', you REFUSE to accept by saying, ' Please keep the length of your question to 255 characters or less...» » !!! You are ABLE to say that BEFORE I go through all the other MESS? HOW TO BRING BACK THE BROWSER MORE OLD?

  ISSUE INITIAL = I got SEVERAL plugins that WORKED! Then, I 'upgraded' {like you, LAUGHING, claim} to your version of Firefox 4 after promising to you that it is BETTER and, supposedly, an IMPROVEMENT over the old version. After you install the NEW one ~ IT TURNS OUT ALL MY PREVIOUS PLUGINS! Your WISHTHEYWUZ "PROGRAMMERS", very skillfully {and, in fact, HATEFULLY} uh, kinda "forgot" to make the new browser for COMPATIBILITY ASCENDANTE so that it does not DESTROY us, already, had ~ that WORKED before YOU put your hands on it! So, now, * HOW * I get the OLD version back? I think you need to KNOW what you can do with this new 'UPGRADE' which is, in fact, a LIE! UPGRADES don't take you BACKWARDS ~ make things WORSE ~ real upgrades make things BETTER! DUH-H-H!

  ORIGINAL DETAILS =
  I, recently bought, a new HP 4500 printer and it came with an extension to capture video/plugin. Attempt to use, the program informed me that I had to use, either, an IC or a Firefox browser mentioning the version1.5 {I think it was} or later. The Firefox browser I was using was 3.something; then, everything was going along FINE. When I installed the video capture program, she added the plugin for the browser ~ PERFECTLY! I had too MUCH other plugins that worked and I used somewhat regularly! NO MORE! YOU and your TOTALLY INEPTE, WISHTHEYWUZ 'PROGRAMMERS' STOLE half of my COMPUTER! I can't, is more, USE ALL OF THOSE PLUGINS, simply because you "forgot" {say} to INCLUDE in your new browser version 4. WHAT WAS WRONG WITH THEM? WHY DON'T * YOU * WANT ME TO BE ABLE TO USE THEM, MORE?

  Apparently, YOU think that the computer world revolves around YOU, and YOU are its AXIS! You feel that YOU have NO RESPONSIBILITY to make YOUR programs in no way compatible with what is already available ~ according to the "advice", I noticed on one of YOUR pages WHILE REACHING THIS ONE, you said that everyone must adapt to YOUR claimed "improvements" that are just DESTROY!

  All I want is for YOU to either MAKE YOUR VERSION 4 COMPATIBLE; or advise me on HOW to get the EARLIER back version that * IS * compatible. Otherwise, I'll switch to another browser and advise all the others that I have one any influence to do the same for the good of their overall computer enjoyment!

  PLEASE ADVISE!

  I see that you have provided this window} {below a space for, probably, a UNIQUE Extension / Plugin.} Therefore, a PARTIAL LIST follows ~

  ArcSoft video 2.0.0.8 Downloader extension
  Copy into Wordperfect Lightning 1.0
  Google Photos Screensaver 2.0
  HP Smart Web Printing 4.5
  iWinGames Plugin 1.5
  Microsoft.NET Framework Wizard 1.2.1
  2.0.0.11 RAW thumbnail viewer
  Real Player browser Record 1.1.3 Plugin
  TVU Player 2.5.3.1 Web
  Yahoo! Toolbar 2.1.3.20100310105313

  http://support.Mozilla.com/en-us/KB/installing+a+previous+version+of+Firefox

  http://www.Mozilla.com/en-us/Firefox/all-older.html

• More partition

  Hello world

  I HAVE HP DV7 WITH 750 GB HARD DRIVE AND I WANT TO DO MORE PARTITION AND I ALSO HAVE A RECOVERY DISK. CAN I MAKE MULTIPLE DRIVES 750 GB HARD DRIVE BY REINSTALLING THE RECOVERY DISK WINDOW. AND IF IT IS POSSIBLE, HOW?

  PLEASE EXPLAIN

  WITH GREETINGS

  IMRAN IJAZ BUTT

  Hello

  No need to re - install Windows. Please use the following tutorials:

  http://www.PCWorld.com/article/2066191/how-to-partition-a-hard-drive.html

  https://www.YouTube.com/watch?v=8ln5jsdmB_A

  Kind regards.

• My watch clock: 2012,03,2012 at 20:10. How to get back the Date please.

  My watch clock: 2012,03,2012 at 20:10.  How to get back the Date please.

  http://www.ehow.com/how_2052285_change-time-date-Windows-XP.html

  http://support.Microsoft.com/kb/307938

  UTC/GMT is 20:12 on Friday, February 24, 2012

• Impossible to transfer large amounts of data more than 10 GB

  Original title: the maximum data transfer size?

  I recently installed an eSata controller card in location faster PCIex-1 of my computer to benefit from a transfer of data to and from my Fantom drives GreenDrive, of 2 TB external HARD drive.  When I started to copy the files from that drive to a new drive HARD internal, I recently installed I could not transfer large amounts of data more than 10 GB.  The pop-up message indicating files preparing to copy, then nothing would pass.  When I copy or cut smaller amounts of data all works fine.  Perplexed...

  I think I got the question.  It seems that some of the files I transfer were problematic.  When I transferred in small amounts, I was then invited for what I wanted to do about these files.  Thanks for the reply!

• Current version of the data in the database has changed since the user initiated the update process.

  Hello

  I get this error message: when I update a table.

  • Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "4975F66067C6EE412FF51DF46B8C4916" line application version identifier = "31163419BE48C198DE88A34AD12FE4D2".

  I get this message when a process is used to run an update on the same table.

  BEGIN

  RUN IMMEDIATELY "UPDATE CONTRATS_MAINTENANCE SET EMAIL_SENDED = 0 WHERE ID =: 1' WITH THE HELP OF: P27_ID;"

  END;

  There is an automated line (DML) process process on the table on this page.

  
  

  I understand that I get this error message because I update the database EMAIL_SENDED in the same table column and tha the automated process line try to update the same table...

  On this page, I want to the column EMAIL_SENDED always has the value 0 (zero). It is a database column

  How to do?

  Thank you for your help.

  Christian

  If you try to make it through a normal form. So in this case email_sended is getting two values one of your FORM and one of your update statement.

  To resolve this problem, you can code in hard EMAIL_SENDED point the value '0' and keep only the database column.

  If the whenver update you will automatically take the value 0.

  Another solution would be to remove this column from your FORM and then update by creating a process after submit.

  BR,

  Patrick

• Current version of the data in the database has changed since the user has launched the process of update: tabular

  Hi people

  Version of the apex is 4.2

  Oracle database: 11.2.0.2

  I have created a simple form in a table on a table with the following structure

  {code}

  Name                                                  Null?    Type

  ----------------------------------------------------- -------- --------------

  TID NOT NULL NUMBER

  TEAM_NAME VARCHAR2 (30)

  EMP_NAME VARCHAR2 (30)

  DATE OF REPORT_DATE

  CATEGORY_NAME VARCHAR2 (30)

  NUMBER OF CATEGORY_HR

  CATEGORY_COMMENT VARCHAR2 (120)

  CREATED_DT                                                     DATE

  CREATED_BY VARCHAR2 (30)

  STATUS VARCHAR2 (1)

  {code}

  In the form of default table is

  {code}

  Select

  TID,

  TID TID_DISPLAY,

  TEAM_NAME,

  EMP_NAME,

  REPORT_DATE,

  CATEGORY_NAME,

  CATEGORY_HR,

  CATEGORY_COMMENT,

  CREATED_DT,

  CREATED_BY

  of ' #OWNER # '. " TIMESHEET.

  {code}

  I wanted to add an additional line inserted in the tabular presentation, that's why I included 'UNION ALL' in the query like this

  {code}

  Union of all the

  Select

  TID, null,

  tid_display null,

  team_name null,

  emp_name null,

  report_date null,

  category_name null,

  category_hr null,

  category_comment null,

  created_dt null,

  created_by null

  of the double

  {code}

  After having done that, I can see a blank line on the form of tables, but each time I fill data in the fields and press the "SUBMIT" button, I get the below error

  Current version of the data in the database has changed since the user has launched the process of update

  Thank you

  Navneet

  Why are you insert an extra line manually in tabular from?  There is a feature to add a line.

  If you want to insert a blank line when the page loads, then create dynamic action, this is a most appropriate feature.

  If you manually insert an extra line so that you have to write the update for this procedure.

  Leave.