Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

Similar Questions

• the entry point producer d3dperf_setmarker is not found in the library d3d9.dll dynamics.

  All my games do not work

  When I double click on fifa 09, he said that the producer entry point not found d3dperf_setmarker in the library d3d9.dll dynamics.

  can someone tell me how to solve this problem

  Hello

  Please check if you are able to play this game in a spare user account

  -Cleanboot Windows to isolate 3rd party interference

  -Check if there is an update/patch for the game

  -System Restore to a date and time when the game worked successfully

  -Open the control panel and try to repair the application

  Uninstall/reinstall the game

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• MpHeapReAlloc could not be found in the library ODBC32.dll Hotlinks

  MpHeapReAlloc could not be found in the library ODBC32.dll Hotlinks

  Hi jimmymichael,

  (1) what is you receive the exact error message?

  (2) when exactly you get this error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If this problem occurs when you try to install all programs, and then try Method 2

  Method 2:  Clean boot the computer and then try to install the program

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• message receipt-cannot load the library wxfw.dll Err code: 126

  I am trying to download the Weather Channel Desktop and get the message - unable to load library wxfw.dll Err code: 126.  I had on my desk before but uninstalled due to some problems and was just to reinstall.  I have windows vista on my dell computer.  Can anyone help?

  Hi Deeheck,
   
  1. How do you try to download the Weather Channel Desktop?
   
  Weather office will not work with the browser level is set to "high" security, (must be set to medium or lower.) This will allow the controls ActiveX and Active Scripting, which is also required for weather Office Download, install and run correctly.
   
  The adjustments can be made as follows:
   
  a. open the Internet Explorer browser.
  b. click on tools in the menu bar of the browser.
  c. highlight the menu drop-down and click on Internet Options.
  d. click on the tab that says security.
  e. click on the Internet icon in the window
  f. for 'medium level', you can click on the 'default' button and then click OK.
  g. you can also click on the button "Custom level" and adjust your settings to "enable" Active Scripting and ActiveX controls.
  h. downstairs, you can also select 'medium' for your security level and click OK.
   
  Uninstall Channel desktop
   
  This is a known issue with the product and will be fixed in a next version. Copy the UNWARY. EXE in the Framework folder in the folder Desktop Weather will solve this problem. The steps are as follows:
   
  a. go to start, programs, accessories, Windows Explorer.
  b. in the scrolling window left to click from Windows Explorer the + next to my computer, then click on the + sign next to C: drive to expand the view.
  3. scroll the menu until you find the Program Files folder.
  c. double-click the Program Files folder to expand the view.
  d. scroll down to the bottom of this menu for The Weather Channel FW folder and double click it to expand the view.
  e. double-click the Framework folder to view the contents.
  f. right mouse click on the icon that says ' "RECKLESS.". " EXE"on the shortcut menu, click COPY.
  g. go to the toolbar on the window and click the previous button.
  h. in this window click on the folder "Desktop Weather" right and in the context menu click on paste.
   
  After you uninstall programs and features, you can check the issue.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Skype error: Fatal Error - cannot load the library 'olepro32.dll' (N

  Normally, my Skype is perfect! but for some strange reason, it stopped working! I tried to research this topic but failed to fill and reslove this

  He will be very grateful if you guys help me to reslove this!

  

  

  The issue is not with Skype but with damaged your computer system files.

  Try to run the tool (sfc/scannow) System File Checker

  http://support.Microsoft.com/kb/929833

  See also this similar case:

  http://community.Skype.com/T5/Windows-desktop-client/failed-to-load-library-OLEPRO32-DLL/m-p/3700047...

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• Receives the following message: procedure the directory of the dll entry point 'W' could not be located in the library of links Dynamics kernel32.dll.

  PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. MESSAGE APPEARS...

  PROCEDURE ENTRY POINT SET THE 'W' DLL DIRECTORY COULD NOT BE LOCATED IN DYNAMIC LINK LIBRARY KERNEL32. DLL. THIS MESSAGE APPEARS.

  Hello

  1. when exactly you receive this error message?

  2 did you a recent software or hardware changes to the system?

  3. are you able to start the system in normal mode?

  Method 1:

  If this a recent issue, then you try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates, that you have installed are removed.

  To run the system restore, you can consult the following link:

  How to restore Windows XP to a previous state

  Method 2:

  You can also scan SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  a. Click Start, click Run, type cmdand then click OK.

  b. in the sfc/scannow command line type, then press on enter

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• Use of very high ram of the Mac mini end of 2012 after startup

  Hello my name is Ogi.Recently I have problem with my mac mini 2012.I end had a problem starting, so I used the startup, says apple. This problem has been resolved. But then another problem showed. Now, after I turn my mac mini on when I'll be on the desk I noticed that my mac is really slow. Then I open the activity monitor and watched. Wow 3.50 GB of ram used off 4. and I have not any startup programs. Now, so my mac is pretty useless. And btw, before when I started my mac I got 2.50 GB used and free 2.50, it is normal. Help, please!

  Thanks in advance

  When you use a memory

  Run and view the results here so that we know more about your configuration.

  EtreCheck

  From Mavericks, OSX tries to use all of the memory. Memory is not actively used is used to cache of files that may be needed.

• the mouse cursor sticks 5 minutes after startup

  I'm not terrible with my mouse cursor.  I start as usual - all seems to work.  Then after 5 minutes the cursor sticks.  I tried to reset then close down and ty again.  Doing this for two days now.

  Hello

  1. when the question is is produced?
  2. you remember to make changes to your computer before the problem?
  3. are you using a cable or a wireless mouse?

  Follow the steps mentioned below and check if the problem persists.

  Step 1:

  Start your computer in safe mode and check if the problem persists

  Step 2:

   
  If the problem does not persist in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

• Microsoft visual c ++ run the library error message is display on startup

  Whenever I start the system Microsoft visual c ++ run time library error message is display if I click ok, the next window see the windows Explorer has stopped working even as yet, it is repeated until I have goes ti online after you connect to the internet, it disappears.

  Please tell me how to solve what I tried many options.

  Here is the message

  

  Hi Harshals,

  Method 1:

  You can put your boot system to solve the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the above article.

  Method 2:

  I would suggest removing all of them and then reinstall the latest version:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8328

• D3DPERF_SetMarker procedure entry point could not be found in the dynamic link library d3d9.dll file

  I'm having a problem playing a game "fifa" 2010 on my pc. When I opened the fifa10 shortcut on my desktop, it shows a dialog box saying "entry procedure that point D3DPERF_SetMarker is not found in the library of links Dynamics file d3d9.dll. What should I do?
  I use Windows Xp service pack 2.

  Mohd Monis,
  First thing I would say is to get your current PC with Windows updates.  Service Pack 3 was released in April 08.  If you did not or limited updates updates since then, you should get your system up to date.  If you are not invited to any DirectX updates then you can go to this link and download the latest DirectX 9 for your system. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Iexplore.exe entry not found

  I just did a restore on my windows xp system and am now trying to run the feature update for windows, but I can't go on the internet.  I just get this error.

  the procedure entry point setdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file

  any help would be greatly appreciated. Thank you

  Hello

  ·        What version of Internet Explorer is installed on the system?

  ·        Are you able to connect to other sites?

  ·        Your system is up to date by installing all the essential Microsoft updates?

  Method 1:

  If it's only a problem with Windows update then, I suggest you to check the below link.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2:

  I suggest you to do a scan of the SFC. Of file system (CFS) when checking that all the Windows XP system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  e. audit % complete.

  f. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• ERROR 7026: CONTINUATION OF THE DRIVER (S) FAILED TO LOAD AFTER RESTART

  The event viewer showed this error after startup for 2 or 3 days. The drivers listed are OMCI and NULL. I've been ignoring it causes web search seems to show OMCI is a cost of control tool for IT managers that has to do with the networks... I have only one computer.  My system performance is very good. I went to devices and updated all the drivers. Should I worry about this? I had to do cleans up registry, disk defragmentation, disc chk, associated clean disc trying to get rid of a virus... This error code showed some time ago and then stopped and now there back THANKS Pharmerbill

  Hello

  This issue may be caused if one of the device driver on your computer is faulty. This is probably due to the graphics card. You should try to reinstall the drivers adpter display in most of the cases it fixed the issue.

  See you soon.

• hpqtra08.exe - Entry Point not found error. The Get procedure entry point Module F < [not found in KERNEL32.dll dynamic link library.

  Original title: hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  (This keeps popping up on my screen and I don't know how to get rid of it. Can you please tell me what to do?)

  Hello

  ·         When exactly do you get this error message?

  ·         Did you of recent changes to the computer before this problem?

  ·         You are able to boot to the desktop?

  You can follow these suggestions:

  Method 1:

  If the previous step fails, follow these steps:

  a. restart the computer in safe mode and disable the HP service and check if the problem occurs. Follow the steps described in the following steps:

  b. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  c. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  d. Click Start and run, type msconfig, and then click OK.

  e. the system dialog Configuration utility appears.

  f. click on the Services tab.

  g. Click to select the check box Services HP Digital Imaging Monitor or hpqtra08.exe.

  h. click OK.

  i. When you are prompted, click on restart to restart the computer.

  j. after reboot check if the problem occurs.

  Method 2:

  If the C:\Program Files, download and run the Microsoft of the link Security Scanner to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.