vCD VM event customization?

Similar Questions

• Problem with customization specifications setting Administrator Password Manager

  I have two problems.

  I have a model R2 Windows Server 2012 in a vCenter 5.1 (Build 1123961) environment. I created a vSphere Client Windows customization feedback, however, (and the main issue) I notice that it does not have the administrator password to what I entered after it don't this is sysprep deployment of a model.

  I've created a script around to do this, which works very well, unless I experience my second question. When customization is started, it creates the event "vim.event.Customization.StartedEvent". He is then supposed to create the 'vim.event.CustomizationSucceeded' event once it has successfully managed the customization, including the command sysprep (and setting the password). Occasionally, but does not trigger the event "vim.even.CustomizationSucceeded" until the days or weeks after the initial event of beginning of customization, which will cause the sysprep crush my difficulty scripts and not allow me to log in under the administrator because of the question first, main account.

  Any thought to why sysprep does not have the administrator password to what I specified in the customization of the OS? Or why the successful event of customization does not always raise after it was launched (in minutes and not days/weeks)?

  I ask just once more: the administrator password model guest empty OS?

  vSphere 5.5 Documentation Centre : you can change the administrator password if the password for administrator on the Windows virtual machine is empty. If the model or the Windows virtual machine already has a password, the administrator password does not change.

• Customization of the guest operating system

  Dear people,

  I have a configured Windows 2008 VM and trying to put the password (through comments of vCD properties VM customization). A virtual machine VMware Tools installed and sysprep files are all configured correct in vCloud Director cell.

  I had chosen to activate the customization with Auto generate the password option is selected. The first time, it has generated an automatic password (but I forgot to note - my bad!). After that I thought specify a new and from there, it went wrong. Now I can't log in even after specifying a password. I seems that personalization does not at all. When I put back "Reset Password" AutoGenerate, it shows as "not available".

  Is there a way to recover my old password? What log file have this info? And no idea what causes the problem here?

  / Jas

  Hello

  After you change the password settings in customizing of comments, you must reapply the customization of comments. This can be done by selecting "power and force recustomization ' in the VM menu. Have you tried that? The password is displayed as "Out of stock" until the virtual machine is powered off - it will show the newly generated password, once it is running.

  Kind regards

  Todor Todorov

• Difference between different "trigger events" in the form of customization

  Hi Experts,

  Can you get it someone please let me know precisely the difference between the various 'trigger events' (better with a simple example) in the form of customization in Oracle Apps?

  A TIME NEW FORM INSTANCE
  A TIME NEWS BLOCK INSTANCE
  A TIMES-NEWS-RECORD-INSTANCE
  ONCE - NEW - ITEM - INSTANCE
  WHEN-VALIDATE-RECORD
  1 by SPECIAL45

  Mainly, I'm confuse when use A TIMES-NEWS-RECORD-INSTANCE, WHEN-VALIDATE-RECORD and A TIMES-NEWS-POINT-INSTANCE (it will be that it is very useful, if it is provided with a simple example to understand the difference between these 3)

  Thanks in advance,

  Bommi

  Hello

  Once - new - form - Instance: this trigger is called just after form is called. If you can do what you need to do before the start of the form. Make sure that this trigger is called only when the form is opened.

  WHEN-VALIDATE-RECORD: this trigger is called when the cursor is moved off the current record of the block specified to another record. This trigger can be very useful when trying to insert or update a record under certain costraints. If conditions are true to this trigger and form_trigger_failure will pass under the situation has no validation, recording is not saved. Thus, everything works fine.

  Once - new - Record - Instance: this trigger is called when the cursor passes on a new record in the specified block. This trigger can be useful when it is necessary to set the computed value of an element at the level of each record.

  A time new point Instance: this trigger is called when the subjects in the forms is entered.

  Hope this helps,

  Please mark responds 'Proper' or 'Useful', as appropriate, to facilitate solutions to the other participants in the community

• vCD customization

  If you want to customize your installation of vCD and make it to integrate with other components, what language would typically be in?  What language is more from vCD?  Java? JavaScript? .net?

  We offer two software development kits.  As Java/Python/.NET (I think that we always offer those), and PowerCLI a vCloud extensions in it.

  However, you can use any REST based customer to integrate at the level of the API... it would require a bit more coding.

  The best person to ask is in the forums of developer here: SDK: vSphere SDK, SDK, SDK - Developer Center VMware vCloud vCenter

• CentOS 7 comments customization with vCD 5.5.2 does not

  It seems that CentOS 7 is not taken in charge and invited the customization does not work with 5.5.2/vCenter 5.5u2 of 5.5u2/esxi. Anyone found a solution for this? < Br > I am currently using the provided operating system open-vm-tools + the plugin this Ko deployPkg http://kb.vmware.com/kb/2075048 . I used VMware provided tools and had the same results as well. IP address is not configured host name is not configured the looks like the customization comments script works but failed due to networking are declining. Search the logs for 'Customize guest' file does not display errors that can be used. < br > insight is appreciated. Thanks, Blake

  Yes, we now use this hack and work well with straight vCD and vSphere. https://lonesysadmin.NET/2015/01/06/CentOS-7-refusing-VMware-vSphere-guest-OS-customizations/

• Customization of VCD comments fail to finish before vmtools restarts the server

  Hi all

  You are looking for assistance. I'm trying to run a script powershell to the customization post. This script works fine if run independently. The question I see newspapers is vmware tools marks the complete script once past the initiates a reboot of the system. This obviously prevents my powershell to finish. The script is copy the files to the client to then proceed with an installation.

  So my question is that nobody knows how to stop either vmtools to initiate the restart until the end of my script or how to tell my script to stop the vmtools start resetting. I still want the tools at the end, but not until my script is done.

  I tried to add various command to the script with no joy, I think it's because vmtools run command shell of power and esteem/marks it complete and moves independently of what happens. This is for servers Windows 2008 R2 and im using VCD 5.1.

  Any ideas would be appreciated.

  Paul

  Post edited by: Cart3r This is the script of customization under the properties of the virtual machine @echo off if '%1% ' is "precustomization" (echo of precustomization task) if '%1% ' is 'postcustomization' (echo postcustomization tasks powershell.exe - ExecutionPolicy Unrestricted - folder C:\vCD\install-local-agent.ps1 )

  Hi Paul,.

  Based on the newspaper it seems to me that you actually run VCD 1.5 (not 5.1). Could you tell me the Version/Build date help > about? If this is the case and you can't find a way to run your script synchronously, or the timeout of 100 seconds is not enough, I recommend you to run your commands by planning a separate Windows task runs after reboot (this is how we do it in VCD 5.1.x):

  \\system32\\schtasks.exe / create /sc ONSTART $ more HIGH/np/z v1 /ru SYSTEM /tr 'order' /tn "my tasks".

  Remember that you may need to remove it later, because Windows often fails to do so, even if the arguments instruct to do.

  / Andrii

• Unable to join the domain using customization comments vCD

  I have vCloud Director installed and running.  I created a vApp and edited the properties to allow customization of comments and more everything works so far but the computer will not join the domain.  I tried to use organization customization, as well as customize the TIME after deployment.  As soon as the server ends with the customization and is powered, I can log in and join the domain manually without any problem, I can't get comments customization to do that for me.   Its a Windows 2008 R2 server.  I found this entry at the end of the journal to customize-comments on the server:

  run the command netsh interface ip set dns 12 xxx.xxx.xxx.xxx static (it has the correct address for my DNS server) =

  The command has been successfully run, the output of the command:

  The configured DNS server is incorrect or does not exist

  Any thoughts?

  It is a farily well known problem.  For a join of field works in vCloud Director, you must have on your DHCP subnet.  Many people make using the vShield edge device that is located on the network of the Org.  The sysprep process runs before tools VMware is running (which applies to the satic IP address to the client).  It's sort of a situation or hen that the guest has ip when in sysprep, so the easy solution to make it work is DHCP.  Conversely, people did it is in port, a lab post script custization in vCD Manager who entered the field after the sysprep is made completely and the guest it's static IP.  Frankly, it's something of the order of operations that is causing the problem.  We are looking at this for other clients, but at the moment, what your options are

  (1) add DHCP to the subnet by using your own server DHCP OR vShield Edge

  (2) add a PostScript of customization to join the domain, it can be inserted into the comments thus customizaion area.

  Hope this helps you stop banging their heads on the wall

• Customize Invitations to events

  Hello

  I'm looking to help someone wishing to customize their invitations to events to include the users name.  I looked around the email templates, but I do not see a field that would add each user name.  Someone knows a way to customize the prompt and record the name of users?

  Thank you

  Marcus

  Hi MFarrell,

  Email template invitation event is customizable and you can include the user name in this model using the first name and family name run time field. To add this just runtime field change model of electronic mail and use the text component and edit this text xomponent where you will find all the available runtime fields. Select the field first name and family name and insert it.

  

  Thank you

  Vikash Acharya

• Events - how to customize the url of the folder of public events

  I personalized my event landing and URL for the registration page.  I can't customize the url of the folder of public events.  How can I do this so that people can have an easy to remember

  URL to go?

  Thank you

  Leanne

  You can not. This URL is programmatically assigned when the file is created by Connect. The folders have the option for custom URLS.

  You can always use a service that provides a shorter URL and re - heading you want. There are many services such as:

  Google: http://goo.gl

  Bitly: http://bitly.com

  TinyURL: http://tinyurl.com/cnseuy

  Short URL: http://shorturl.com

• Customize forms - focus event trigger effect

  Hello
  I need to validate a value at the time where a cursor leave the field.
  
  Is it possible to achieve using the customization of the form?
  
  Kind regards
  Malin

  Hello.

  Have you tried using a TIMES NEW POINT INSTANCE the field where the cursor is placed after leaving the field that you want to post?

  Octavio

• How to catch events button that is added through customization

  Dear friends,

  I Googled, otn ed but couldn't find a solution.

  I created a button thru pers.n (Req, this is when the user clicks this button must run a simultaneous program).

  Not able to set fireaction, can be a help in this regard.

  Let me know for any clarification

  Thank you

  Aravinda

  Hello

  try to set fireAction in CO by using code below if you can get the button handle successfully.

  OAButtonBean xxButton = (OAButtonBean) webBean.findChildRecursive ("xxCustButton");

  xxButton.setFireActionForSubmit ();

  Then get the handle to this button in LICS.

  BR, 906099.

• How can I make 'No. MORE EVENTS' go?

  I just got a 42MM stainless steel sport and have spent most of the day he set up and exploring. On several faces, including the utility and the faces of Mickey Mouse, there a line of text at the bottom that says 'NO MORE EVENTS'. I can't find any information on what it is or how to make it go away.

  Hello...

  Congratulations on your new Apple Watch!

  Try using the Apple Watch user's Guide...

  Customize your watch face

  and here > on the Faces & features

• Is there a change of cursor in tiara event?

  Hi all

  I'm quite new script in DIAdem, so am not sure of what he is capable (I am before all a LabVIEW Developer).

  For the application I have in mind, we will have several video files that have been captured over time. We would like the user to scroll a 2D channel screen and load automatically (and sync) video to the data.

  I see no a script to get the cursor position as the user changes. Is there a published event shape changing cursor position or I can query the position of a cursor while the user changes it?

  In addition, during the execution of a script is it possible for the user to continue their activities as usual? that is, interact with the graphs etc.?

  Kind regards

  Neil

  Hi Neil,

  There is an event of moving the cursor in the MODE that you can customize.  The user cannot run tiara while the event script is running, but it can work DIAdem normally between the cursor moves.  I enclose a sample that shows how to attach your client (such as a UserCommand) script to VIEW cursor event.  It's a bit complicated, so feel free to ask questions of clarification.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Event navigation response is Slow

  Hello

  I have download a demo interface to illustrate a problem I encounter.

  I use a control tab and 'Buttons OK' to change the tabs.

  The appearance of the 'OK' button is changed by pasting images of Microsoft Visio, through the button right click-> Advanced-> customize.

  Clicks on the "OK" buttons are captured using the "change value" in a "Structure of the event.

  The problem is that sometimes an "OK" button needs more 1 click to work. In the original interface that has more decorations, the buttons "OK" a lot... a lot of clicks people need to go to another tab.

  What is more, the tabs are not clickable, when the program is in "Run" mode

  What should I change?

  Thank you.

  nikosfs wrote:

  If the labels are not at the top of the tile, they are not visible. But if they are on top, they exclude a clickable area. Then?

  Use the Boolean text and hide the label

  nikosfs wrote:

  If I make the buttons bigger than images, I need to make it transparent, but I don't know how I can do.

  You must import photos into the button, not the decoration elements. (see button on page 2, that I modified in the VI attached. I have not hcange anything else...).

  nikosfs wrote:

  I am attaching the file vi once again, this time with the while loop. It does not seem to occupy 50% of the CPU usage, but my interface original, does have a similar code.

  You wired probably a zero for the timeout.

  Also, for the latch action buttons, terminals belong in the respective events. Also note the coercion. Enum constant diagram is of the wrong type.