Customization of VCD comments fail to finish before vmtools restarts the server

Similar Questions

• Impossible/failed to start upload in DW CS4 (recent issue, worked) and DW CC 2014. FileZilla fails also, but BOTH connect to the server. No changes known to desktop system.

  Start: 14/07/2014 12:44

  0100.html cContacts\Copy - transfer
  0100.html cContacts\Copy - error is produced - year FTP error has appeared - can't copy of 0100.html.  Error of internal data, perhaps because of the failure to start the download.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  File transfer failed due to the following reasons:
  -Internal error data, perhaps because of the failure to start download.

  Files with errors: 1
  0100.html cContacts\Copy

  Finishing: 14/07/2014 12:45

  OF FILEZILLA

  Command: Type

  Answer: 200 switching in ASCII mode.

  Command: PASV

  Answer: 227 entry Passive Mode (38,102,237,240,170,242).

  Command: STOR 0000.html

  Answer: 550 Permission denied.

   

  : Critical file transfer error

  Thank you Jon and o. Nancy it was indeed a problem with the server and the provider that they fixed and all is well now.

• VMA new v6 Server Error (s) runs a command ESXCLI: connection failed. Digital fingerprint SHA1 of the server (not approved)

  New Server v6 of vMA. Added two new ESXi hosts v6 at the VMAs with no problems. When I change the target to one of these new hosts and try to run "esxcli system syslog recharge", I get the error: failed to connect . (Untrusted) Server SHA1 thumbprint [thumb print listed here] .

  Research tells me what to do if I get this error running and order ESXCLI on my PC, but nothing when it arrives at the VMAs.

  Any help is appreciated people - thank you!

  Me am I say - READ THE MANUAL/RELEASE NOTES

  vMA 6.0 Release Notes

  • ESXCLI command displays SSH fingerprint error

    When you run a command ESXCLI in each target ESX, footprint SSH error appears. Add the footprint against each target ESX using the credstore_admin.pl utility. Run the following command:

    /usr/lib/VMware-VCLI/apps/General/credstore_admin.pl add s ServerName> imprintt >

    where: servername is the name of target ESX and Thumbprint is the value that is received in error during the execution of the command esxcli .

    For example:

    VI-admin@sin2-Pek-esxplatdhcp156 :/> Add sin2-pek - esxplatdhcp211.eng.vmware.com - s /usr/lib/vmware-vcli/apps/general/credstore_admin.pl t E2:FA:96:09:FC:18:C8:19:07:3F:78:12:74:46:66:1E:C8:3 B: 84:8 C

    VI-admin@sin2-Pek-esxplatdhcp156 :/> /usr/lib/vmware-vcli/apps/general/credstore_admin.pl add s 10.111.8.211 t E2:FA:96:09:FC:18:C8:19:07:3F:78:12:74:46:66:1E:C8:3 B: 84:8 C

    This problem has been resolved in this release.

  All better.

• WARNING: Unable to update the preferences of the user has failed to establish a connection with the server of history. Service could be down. Please try again later.

  Error when you try to import

  WARNING: Unable to update the preferences of the user

  Cannot establish a connection with the server of history. Service could be down. Please try again later.

  Can you please try again? Please let us know if you still experience this issue.

• Satrtup admin server fails with the error user weblogic is not allowed to start the server

  Hello

  The server administrator is not come, his failure with the error below.

  < 25 may 2014 10:28:35 PM PDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: weblogic user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.

  weblogic.security.SecurityInitializationException: weblogic user is not allowed to start the server; The server policy may have changed so that the user is no longer able to start the server. Restart the server with an administrative user account, or contact the system administrator to update the definitions of server policies.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  Truncated. check the log file full stacktrace.

  I tried to reset the password by link, below, it has not helped. Always face the question. Help, please

  http://www.WebLogic-tips.com/WLS-security/

  Thank you

  Pradeep

  Hi all

  It worked after you run the java command in the Security directory. When setDomain.sh term, it redirects to DOMAIN_HOME. From there, go to the directory of securities and run the java command to reset the password.

  Thank you

  Pradeep

• Full customization VM pool comments works not

  The problem:

  I deployed a pool (VMs dedicated, full) and im using a specification of customization of the comments that I made on my server.

  When the provisions of the VM (looking this provisioning in vSphere client), it will be a virtual machine by using the template, I can connect for about a minute and it still has the name of the Image that I use. After that it restarts and it starts first time Windows 7 installation (as shown in the picture).

  It seems that the customization is not from for some reason any. I have deployed the virtual machine with the option ' no - customization will be done manually "and it works.

  The spec of customization settings are:

  name: name of the company
  NetBIOS name: use the VM name

  License: no key (for more convenience, but with the key do not work or the other)

  Admin password: admin Local move from the VM model

  Run once: -.

  Network: typical
  Domain: test.local
  Administrator

  Password

  Password

  Generate a new SID: checked

  Any idea why customization does not start on my deployment?

  Best regards

  Patrick

  Good to know you solved the problem, that's exactly why I suggested directly deploy you the vm of vc and check. If direct deployment does not work with the same custom specification, the problem is always with the design or the custom specification. view automates everything we do manually in the CR.

  -noble

• vmmark2 - error - time synchronization failed start/finish

  vmmark2 - error - time synchronization failed start/finish returned RC = 10002, System Error 1326 unknown or wrong password username.

  I provided the correct credentials to connect to the VCserver.  Not sure why she's enclosure.

  Is the VC server credentials or the credentials of vcenter?  These two don't with the same error.

  Without a NTP server, you will need to manually synchronize things to the top and make sure that they don't automatically readjust their time.  Review the TimeChecks.txt file that is generated when executing.  This will tell you how far the individual systems are.  Each system must be within 60 seconds of the first customer.

• 2008 R2 customization Catch 22 comments

  Type of Catch 22...

  VMWare 3.5u5 VC 2.5u5

  Prompt Windows 2008R2

  I like what comments to VMWare customizations have to offer and they work

  great as naming the computer after the name of the Virtual Machine. This

  I can't do with a custom unattend.xml file.

  However, I would like to install the default profile with some

  customizations and now the old "copy of the default user profile.

  Profile' is not supported: http://support.microsoft.com/kb/959753

  The supported method is to create create an unattend.xml customized with the

  CopyProfile option set to true, then

  c:\Windows\System32\sysprep\sysprep.exe/generalize /oobe

  / unattend: path to the unattend.xml file... It works fine, after a reboot and

  a mini installer of the custom profile is here.

  But providing a sysprep custom file in the comments Customization Wizard gives you just that, custom sysprep file capabilities.

  Is it possible to have the best of both worlds?

  Maybe you could get the best of both worlds.

  Run the command sysprep once with the custom unattend.xml file

  Who will transfer all the settings of the default profile.

  Restart the virtual machine and you get a VM that is unique to all of the default profile that you need.

  Now you can deploy virtual computer with sysprep values.

  Please note that you have only a maximum of 3 times to run sysprep, unless you use the reset switch

  You now how a VM to measure with the default profile.
  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• How to clear the output buffer, possibly resize and burn again, before you begin the task of output

  I use PyDAQmx with a USB-6363, but I think the question is generic to DAQmx.

  I have an output buffer that I want to be able to (re) write to without starting the task output.

  More specifically, I have a graphical interface and a few sliders, the user can move.  Whenever the slider changes, a new set of values is loaded into the buffer output through DAQmxWriteAnalogF64.  After you set the value, the user can click on a button and start the task output.

  In some cases the change in cursor does not require a change in buffer size, only a change in the data.  In this case, I get the compalint following DAQmx as they tried writing:

  The generation is not yet started, and not enough space is available in the buffer.

  Set a larger buffer, or start the generation before writing data more than content in the buffer.
  Property: DAQmx_Write_RelativeTo
  Value: DAQmx_Val_CurrWritePos
  Property: DAQmx_Write_Offset
  Corresponding value: 0
  Property: DAQmx_Buf_Output_BufSize
  Corresponding value: 92

  In other cases the change in cursor requires both change in the size of the buffer and data modification.  In this case, I get the following, but only after that do a few times each time increase the size of the writing.

  DAQmx writing failed because a previous writing DAQmx configured automatically the size of output buffer. The size of the buffer is equal the number of samples written by channel, so no additional data can be written before the original task.

  Start the generation of before the second writing DAQmx or set true in all instances of writing DAQmx Auto Start. To gradually write to the buffer before starting the task, call DAQmx Configure an output buffer before the first writing DAQmx.
  Task name: _unnamedTask<0>

  State code:-200547
  function DAQmxWriteAnalogF64

  I tried to configure the output via DAQmxCfgOutputBuffer buffer (in some cases, by setting it to zero or a samples, then save again, in an attempt to clear it) but that doesn't seem to do the trick.

  Of course, I can work around the problem by loading data only when the user clicks the end button, but not what I'm asking here.

  Is it possible to "remake" the writing of output before you begin the task?

  Thank you

  Michael

  Today I have no material practical to validate, but try unreserving task before writing the new buffer:

  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Unreserve);

  With a simulated device, he made the error go away in case the buffer is the same size.  You will need to validate if the data are in fact correct, but I think it should be (unreserving I would say reset the write pointer so the old buffer are replaced with the new data).

  I always get errors when you try to change the size of buffer if (on my 6351 simulated).  I posted some similar mistakes about the reconfiguration of the tasks here, I guess it is possible that this issue has also been set at 9.8 (I always use 9.7.5 on this computer).  If the behavior is still present in the new driver, and also appears on real hardware (not just simulated), then it seems that this is a bug of DAQmx someone at OR should be considered.

  I wrote a simple LabVIEW VI that captures the error in order to help people to NOT reproduce it:

  

  The best solution at the moment would be likely to re-create the task if you need to change the size of the buffer (or avoid writing data until you are sure what will be the size of buffer).

  Best regards

• When you try to add 'fédération Service Active Directory' in the VM, it fails with exception after clicking on the last step of the wizard.

  Log Event Viewer as below.

  *****************************************************************

  Event log:

  Log name: Microsoft-Windows-ServerManager/Operational
  Source: Microsoft-Windows-ServerManager
  Date: 07/03/2012 18:09:06
  Event ID: 1600
  Task category: no
  Level: error
  Keywords:
  User: HDC\Administrator
  Computer: Win2K8HDCRoot.HDC.Com
  Description:
  An error has occurred in the Server Manager. An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1600
      0
      2
      0
      0
      0 x 1000000000000000
     
      15
     
     
      Microsoft-Windows-ServerManager/Operational
      Win2K8HDCRoot.hDC.com
     
   
   
      http://schemas.Microsoft.com/win/2004/08/events"xmlns ="Event_NS">
        An unexpected exception has been found:
  System.ArgumentNullException: Value cannot be null.
  to Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.SaveRegistrySetting (Nullable 1 setToCreate, String value, String NomValeurRegistre)
  at Microsoft.Windows.ServerManager.ActiveDirectoryFederationServer.ActiveDirectoryFederationServerProvider.PerformActionBeforeInstall (InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
  at Microsoft.Windows.ServerManager.Common.Provider.PreInstall (InstallableFeatureInformation, DiscoveryResult discoveryResult, ChangeTracker changeTracker comments)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSyncPreInstall (guestsToSync from list 1, 2 syncResultMap dictionary)
  at Microsoft.Windows.ServerManager.Common.Provider.FlushSync (SyncProgressHandler progressCallback)
  at Microsoft.Windows.ServerManager.Common.Provider.FinalFlush (SyncProgressHandler progressCallback)
  to Microsoft.Windows.ServerManager.Transformation.SyncEngine.Sync (ChangeTracker changeTracker, DiscoveryResult discoveryResult, progressUpdateIdList of list 1)
  to Microsoft.Windows.ServerManager.DiscoveryResult.CommitUpdates (ChangeTracker changeTracker, ProgressUpdateCallback progressUpdateDelegate, featureIdsOfInterest of list 1)
  
     
   
  

  *****************************************************************

  Details of home:

  Win 2K 8 R2 Enterprise
  Processor: Xeon x 3440
  Roles: Hyper-V, file Services
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  Virtual machines running: 6
  Total none of the network adapters: 2
  1 NETWORK card: (Intel (r) 82578DM Gigabit Network Connection is connected to service internet broadback. "Statis IP" is set for my server.
  Not virtual networks: 2
  Virtual Network 1 is "External" type and connected to the NIC1. The value settings IPv4/IPv6 IP addresses and DNS automatic.
  Virtual Network 2 is of the type 'internal '. IPv4/IPv6 settings is set to Auto for IP and DNS addresses.

  *****************************************************************

  Information on the virtual machine:

  Win 2K 8 R2 Standard
  Roles; "Domain service active Directory", "DNS Server", "File Services" and "Web Server (IIS).
  Related network configuration: 'Network Doscovery' lit with "SDDP" and "UPnP" running services. Also "DNS client" and "Function Discovery Resource Publication" are running. The firewall is turned on
  None of the network adapters: 2
  Network adapter 1 connected to 'Internal' with IPv4 set to a static IP address '192.168.10.1 ' and DNS set to ' 127.0.0.1'. IPv6 is disabled
  Network 2 connected to 'External' and IPv4 adapter set to automatic for the IP and DNS addresses. IPv6 is disabled
  Domain controller for HDC.Com.

  *****************************************************************

  History of the virtual machine:

  Initially, she felt just VS2010 and SP2010 installed without DNS and AD DS roles added. Later, we VS and SP2010 has been uninstalled via the Control Panel, as well as other programs, I can't recall. Then added roles DNS and Active Directory domain to create and control the field x ".com". After a few days, another virtual computer has been configured in the same way and 'AD FS' role added to try app based on the claims. In the coming days, all of the roles above have been removed and added to create and control the current domain ' HDC. Com'. Before this step, the self-signed certificates that have been installed as part of the App claims have been removed from MMC, and IIS services. Don't forget to change the name of the computer as well.

  *****************************************************************
  I'm not good at bases of the any tried out above learning, but ask the members of the scholarly community to help me solve the problem and I'm sorry if I ask some silly questions as part of this thread.

  Hello

  Is generally answer the question you have posted in the Microsoft Answers forums. It is better suited on TechNet forum
  TechNet Forums -http://social.technet.microsoft.com/Forums/en/categories/

• The desktop icons and taskbar disappear when windows has finished starting - any of the usual things help

  I have a Windows XP Home Edition with a breath main card computer.  Replaced the Board, PS and other items.  Then re-activated windows and everything was fine.  Until the last moment, I rebooted after activating it.  I have the problem that I have seen posted in a bit.  When Windows has finished initializing all the desktop icons and task bar etc. disappear.  Nothing works.

  I can bring up the Task Manager and manually run programs, etc.

  Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.

  I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar.  I also ran several controls of virus, including one for the virus, which is usually the cause of this problem.  (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions.  Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back.  Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something.  In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem.  BUT I think it will break my record.

  I'm doing this as a favor for a friend.  But at this point our friendship is really put to the test

  Hello

  This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• XP hangs before logon for the user profile.

  Propely at startup of Windows, but XP hangs before logon for the user profile.

  The system does not start in all modes like without failure, command prompt mode, last know good Configuration. But it starts only in XP system recovery mode.

  What happened after cloning of a XP C: hard drive Sata Drive Dell OptiLex 760 to another System DELL OptiLlex 760 . I've used Norton Ghost 15.

  Hi ANM

  · Have you created an image of the system using Norton ghost backup software?

  When you create system images using backup software, it is supposed to ideally be used on the same computer, since you cloned it on another computer, it seems to me that the user profile is corrupted and failed to load.

  If the problem is the DELL OptiLex 760 system then I suggest you to connect with Norton Ghost.

  If not then you can follow the market from the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx