VCenter 5.5 U1 can handle 5.0 ESXi hosts?

Similar Questions

• Can no longer add ESXi host to vCenter but OK VI Client connects

  I removed an ESXi host in a cluster on vCenter. Now when I try to add the host (whether for the cluster or stand-alone) the add hosts Wizard appears and has the correct information, but when I cliquerai on closing, that nothing happens for a few minutes, then I get the error:

  Unable to reach the specified host... Maybe it's because this host is not available on the network, there is a problem with the network configuration or management on the host services do not react.

  However, I can connect to the host directly with the VI client and which works very well, even though the events tab displays "VFAT: 2583: Possible FAT Corruption." My copy of ESXi is on a flashdrive in a HP Blade.

  I tried to reboot the host, but it makes no difference. Several of the responses to other users of similar problems is recommended to perform "service vmware-vpxa restart" on the host, but this does not apply to ESXi. I also tried to restart the vCenter, but that makes no difference either.

  Any ideas?

  Thank you

  Will be

  Download iso hpvm-recovery on HP site and reinstall ESXi on flash drive.

  UPD: Yes, as Neil said, check your key USB HP if you bought ESXi Embedded. If you have the Green key aluminum, require the replacement of HP. And then, you definitely have to download iso that I mentioned above

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• How can I migrate an ESXi host since a vDS in a vSwitch with NAS storage on vDS

  I need to move some on a vDS esxi hosts to a standard vSwitch to move a new vCenter ESXi hosts

  I have two 10 GB network adapters that manage the ports VM, NAS storage and vmotion.

  Is there a documented procedure to move a vDS in a vSwitch, particularly for migration from NAS storage to a vSwitch?

  Thank you

  Tom

  No, you will need to do this on a per-host basis.

  I really recommend doing one by one, not in a hurry and checking all the networking before you proceed to the next step. Example: after migrating the vmkernel interfaces, check on a ssh connection to the host if it can vmkping the NAS. Before you move all the virtual machines on the host to the switch std, move one and check if the VM networking continues to function. This will prevent errors and downtime.

• How can I move an ESXi host to another?

  Hello

  I have 2 ESXi hosts running on similar hardware. SSH is enabled on both hosts. I need to move all the VMs from one host to another. What will be the most effective way to do it?

  Most average effecitive: buy vSphere Essentials, configure vCenter, connect the two hosts, virtual machines turn off, do a right click and "migrate." 1 k$ for 3 hosts and vCenter.

  Less effective, but cheaper way: turn off virtual machines, copy VMs to an another ESXi, search for all data, made store .vmx files right-click and "add to the inventory.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• Can the VCenter or general Vm be turn on when the host starts?

  Dear:

  The VCenter or general Vm can be running when the host of start or restart?

  How to do?

  THX.

  It is possible to enable auto-start for the virtual machine, check Automating the process start and stop VMs on VMware ESX

  Also read clarification of questions to start the car in vSphere 5.0 Update 1 functionality has been disabled with vSphere 5.0 and later helped with a patch

• vCenter 5.0 manage 5.5 ESXi hosts?

  Can anyone confirm whether or not a server vCenter 5.0 can manage hosts running ver 5.5?

  Thank you

  Answer is NO:

  vCenter server is backward compatible. vCenter server 5.5 can handle hosts that are 5.0 but vCenter server 5.0 can not handle hosts that are 5.5.

  Thank you
  Avinash

• Most active licenses that capacity license shows page can handle

  Home-> Licensing page shows activated more licenses to capacity can handle

  This happened after that I reinstalled the vCenter connected to a new remote DB created the restoration of the old DB Backup

  I tried to remove the licenses and then applying as new again, but the error remains

  I did not add a new server

  Now I have an alarm to the vCenter: ' alert: inventory of license tracking.

  Any ideas? Thanks in advance

  PS: See the image as an attachment

  If you have an active support agreement, I would recommend that you contact VMware support for this clean up. I assume that this question is related to that described in http://kb.vmware.com/kb/1015268

  André

• What is the maximum number of messages/files that Thunderbird can handle?

  I plan to migrate from Outlook (2007) to Thunderbird (on a PC MsWin7 - Ultimate 64-bit). Unfortunately, I have a lot of historical emails that I still have and periodically reference; Currently, these are several PST files. Reading some of your prior support questions, I discovered that Thunderbird use monolithic mail a database, apparently mapped in the structure of normal file/folder of the operating system (i.e., anything that the user selectable, as supply of PST files); but that Thunderbird will suck in all messages from Outlook PST files during installation, assuming that all of him are open at the time of the installation of Thunderbird (?).

  QUESTION: Which is the case, is there the ALL LIMITS on the number of files or messages that Thunderbird can handle?

  No, I really am aware, other than the available disk space on the computer.

  The limit of 4 GB (per folder) on local files was lifted, but I don't know that I hope the fix. SO think 4 GB as a limit on the size of the folder.

  I'm not aware of any practical limit to the number of accounts. I've heard hundreds and dozens of personally.

  I guess that the file system file size limit still applies, but because it is in windows 7 from 16 to 256 TB in Windows 8, I don't think it's really a matter of concern. (I have not heard a single hard drive this size still).

  With optional mailDir structure to store messages in Thunderbird 38 (a mail a file), then even this limit is theoretical, otherwise than for the overall index and the index file. Note that this is an option for 'New' accounts, those not imported and is not the default.

• HP Envy h8 - 1520t - can handle multiple monitors?

  I want to buy an additional monitor or two, but I don't know if my computer can handle them. According to the specifications of my computer, it has an AMD radeon hd gpu 8570.  Is there any specific kind of connection vga, hdmi, dual-link dvi to run the installation of the multiple monitor? If yes what kind of adaptors/cables do I need?

  It does not matter at all.  Most video cards have only one of each type of connector.  The key is to use the appropriate adapter if necessary.  Furthermore, carefully follow the instructions in the guide.

• This (software) reader can handle a wide range of video formats

  I need locate a video file viewer that can handle a wide range of formats high definition (HD).

  • My VIXIA M400 MOV files,
  • My T2i MTS files,
  • My grandson uses files from an underwater camera cheap Coleman, MOV
  • The M2TS files are conversions of the Coleman camera MOV files, and
  • MOV files that a friend took on her camera NIkon underwater, AW100.

  Over time, there may be other/other video formats, but for the moment a viewer who can see all of these movies would be great.

  All the these are HD files.  AVCHD, I think.  All are captured on SD or SDHC or micro-SD cards.

  I don't want software that "imports" SD cards to the computer files.  I'm not editing software.  I don't want to not cataloging software.  I want just a simple software which will see the files a wide range of HD (and I do not whether I'm a posting in HD).  When I saw them and decided to use (and not use), I'll then work importing and editing using the video editing software enough high-end I own.  But first of all, I would like to just see what I captured.

  I looked and looked without success.  Frankly one of the most difficult files for me to see types are MOV files that come from the VIXIA.

  Somehow, I don't think it should be as difficult as it seems to be.

  erisajd

  Okay, I could have answered my own Q.

  ArcSoft is 'VideoConverter 8' software that does a good job taking all sorts of file formats and transform them into other formats (especially useful for iPod, iPhone, Facebook, YouTube and similar items).

  This software sells for about $30 and to view the files that are about to be converted.  I guess the idea is that if you don't like what you see, you do not convert.

  In any case, it seems to manage all file formats I mentioned.  So I guess I found my own answer.  Wasn't easy, but I found it.

  erisajd

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!

• I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard?

  I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard? I know that the my processor can handle up to 16 GB of RAM, now I have installed only 4 GB of RAM (original), but I want to update to 12 GB of RAM. I want to know if my motherboard can handle?

  I have received and read your private message. Yes, you can install 8 GB + 4 GB (current module). They will work at 1600 instead of 800 MHz (single channel). You will see the difference!

  Here are the compatible memory modules:

  • Crucial
  • PNY

  If you have the budget, I recommend buying a set of 16 GB (2x8Gb).

• I have XP, how do I know if my computer can handle an upgrade to windows 7

  When I defragment it says I have 70% free space. My work with Southern Co. uses windows 7 and I'm supposed to receive a refresher to windows 7 but I don't know if my computer will run well with the upgrade. Is it possible that I can find out if my computer can handle the high grade. I've upgraded to office 2010. Hope someone can help me.

  Windows 7 Compatibility Checker
  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  Windows 7 Upgrade Advisor
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows XP to Windows 7 Migration Guide
  http://TechNet.Microsoft.com/en-us/Windows/ee150430.aspx

  Here are answers to some common questions about the 32-bit versions and 64-bit Windows.
  http://www.Microsoft.com/Windows/Windows-7/compare/32-bit-64-bit-FAQ.aspx

  -------------------------------------- Device Drivers --------------------------------------------------

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers there is a good chance your computer supports Windows 7.

  Download the drivers to a folder on your hard drive, burn it to a CD and once Windows 7 installed, install the drivers (all), starting with the mother/chipset, LAN, Audio, USB, SATA card, drivers, and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.»

  from scratch

  I had to pull the battery on my dell p.c.Now I need to reset everything on the machine. I can handle most of it, but I don't ' know not the initial settings for bios and other initial set up details.» My screen there "list of questions and I n" t have the answers, it is a PHOENIX, I care. Can anyone help?

  Follow this. It should guide you through the configuration of your BIOS.

• What version of the pci express x 16 graphics cards can handle office of a747c?

  What versions of pci Express x 16 graphics cards can handle desktop a747c?

  Your motherboard must support PCI Express v1.0, v1.1 and v2.0 cards without a problem. v2.1 and newer cards can be problematic.