vCenter 5 rename bug (zone schedule known issue)

Similar Questions

• Error recovery DB TIMESTAMP WITH time ZONE SCHEDULE

  I use Managed Driver version 4.121.1.0 with EF. Trying to extract data from a table that contains a column what data type is TIMESTAMP WITH time ZONE SCHEDULE, I get a "System.InvalidTimeZoneException" in Oracle.ManagedDataAccess.dll.

  This is the statement that I'm executing:

  application of var = db. COORDENADA. Select (x = > new {ID = x.COORDENADAID, CREATED = x.FECHAHORAGPS}). ToList();

  var RES = query. ToList();

  When debugging of I am, I can see the SQL to run:

  SELECT

  "Extent1". "" COORDENADAID "AS"COORDENADAID. "

  "Extent1". "' FECHAHORAGPS ' AS 'FECHAHORAGPS '.

  OF "GEOTRACKER. "" COORDENADA ""Extent1 ".

  which causes no problem in Oracle SQL Developer and get these data:

  COORDENADAID FECHAHORAGPS

  ------------ ----------------------------------

  1 06/03/14 17:10:10, EUROPE 000000000

  / PARIS

  2 02/03/14 00:00:00, 000000000 EUROPE

  / PARIS

  ...

  I think there must be something with the time format returned as name instead of offset, but I can't understand how to check this. Any idea

  This bug has been fixed in Oracle DB 12.1.0.1.6 patch bundle which can be downloaded from My Oracle Support (MOS). After you download the patch bundle, you'll notice that it's a pretty important download. There is no need to install the patch to the entire group on your target computer. Instead, simply extract the managed provider and just install it.

  If you do not have access to MOS, ask your DBA that should, or you can wait for the next version of the ODAC for the fix.

• What happened to this known issue with the AIR 18?  Is it fixed? (CSA 2.0, type coercion: 3578605)

  In the recent past, the three ads documented SDK 18 AIR outlet some known problem:

  • ASC2.0 update app reports an error of Type with MovieClips CFC constraint (3578605)

  (For reference: 09/06/2015 - news release - 18 AIR Runtime and SDK |) 08/07/2015 - shared - AIR 18 Runtime and SDK | ( 11/08/2015 - shared - AIR 18 Runtime and SDK )

  Last week, the announcement of the AIR SDK 19 (21/09/2015 - release - 19 AIR Runtime and SDK) there is no mention of whether this is still a known issue or a fixed.  It's a hard problem to test, and it would be good to know if Adobe believes that this issue has now been addressed. (Or... If someone else in the community has evidence suggesting that this problem has been fixed, which would be also good to know!)

  In addition, it would be useful if someone could tell me if this internal bug in question (3578605), corresponds to this public one: Bug #3562040-2.0 app compiled CSA Type coercion report crashes with MovieClips in CFC

  Thank you

  Russell

  Hi Russell,

  This is still a known issue and that I plead.  We had security of mitigation (in other areas) which had priority over that in our press releases press.  He put open/tofix in our database bug with a priority 4/4 and (higher) gravity and I hope we can come back soon.

  Thank you

  Chris

• current known issues for vsphere 5?

  Where can I find a list of known issues for vsphere 5?

  The place for this are the release notes for the version you are using.

  for example http://www.vmware.com/support/vsphere5/doc/vsphere-esx-vcenter-server-50-release-notes.html

  André

• New Mac Pro / first Pro CC / open CL - known issue?

  Hi all

  I am using first Pro CC on a new Mac Pro because it was delivered in January.  After some initial problems and the system hangs everything worked fine until the last update (build 33) but since then I've been meeting all sorts of questions.

  PP is now constantly freezing and crashing not only the software itself, but the entire system requiring a reboot.  Whenever I have to make I get all sorts of strange and wonderful flaws in the pictures and I had to turn off accel GPU by CL open just to get the system viable again.

  So my question - are these known issues with build 33 or is something else going on?

  Another foreign to CL question open (I think) is that XML import / export now seems to be bugged, the point of being unusable.  Very very frustrating!

  Hi simonspear,.

  Please visit the discussion forum which has the same issue. It will be useful.

  Render & export Glitching

  Kind regards

  Vinay

• vSphere vCenter - vCenter 4.0 Update 1 resolution VM issues slow because the disk i/o latency?

  vSphere vCenter - vCenter 4.0 Update 1 resolution VM issues slow because the disk i/o latency?

  My client is slow VM problems that appear to be disk I/O latency on Hitachi storage 1000. I heard in VMware meetings vCenter 4.0 Update 1 solves these problems... without any explanation as to why.

  Rumor is that "after working all the angles of the slowness of the virtual machine including vmtools hardware version, latency of storage, etc. called VMware support and advised to get vCenter to U1 to solve the 'known problem' VM performance issues." "U1 fact and problem solved.

  It is VMware User meeting and I have no other details.

  Customer did not of U1 and having problems of slowness VM believes may be due to the assets/Hitachi 1000 s and favorite paths questions (known to cause problems). Preferred fixed pathing but questions continue.

  My limited participation in the issue of troubleshooting in the date limit information available now. It is just an issue if 'known problem' exists and is known to be resolved via U1 vCenter or ESX 4.0 U1?

  Not vCenter 4.0 Update 1 solve disk i/o latency issues considered the slow pace of the vm? Why?

  All points will be awarded.

  that strike!  You can use round robin or MRU for active/passive.

• ORA-01882: zone schedule region %s not found

  What executeing what follows a query using sqldeveloper Version 2.1.0.63, the request is never ending.
  Select * from dba_scheduler_jobs;
  
  I see the following message is displayed above the query result window. "Execting: select * from dba_scheduler_jobs seconds en.219.
  
  The query does not complete, and there is no error in the log.
  
  
  
  Run the SQL query caused the following error.
  SQL > select * from dba_scheduler_jobs;
  ERROR:
  ORA-01882: zone schedule region %s not found
  
  After seeing this error in sqlplus our DBA executed actions listed on metalink notes 414590.1 . It has now fixed the problem from sqlplus, but the original problem in sqldeveloper persists even after the change in the database.
  
  
  
  What causes the error ORA-01882 and how I can fix?

  It was a bug in 2.1.0; Download 2.1.1 to solve.

  Have fun
  K.

• controls in title bar of window missing in windows 10 (known issue)

  I have problems with the controls of 3 (minimize, maximize, close) window on the top right, since the upgrade to windows 10. They are no longer at all. Everyone knows this? is this a known issue?

  It was in fact 40 beta. I downgraded to 38.1 release and it seems to work now.

• Is there a known issue with Firefox 21 and Citrix ICA Client?

  After the upgrade to FireFox 21 my browser can no longer detect that I installed the Citrix ICA Client and he pushes me whenever I try to run a file from the internet .ica. After several facilities of the ICA Client to the guests, including the uninstall completely and then put it back, I ignored the prompt and tried to launch the .ica file. It will launch 1 single .ica window regardless of the number of .ica files I click on. (Firefox 20 would allow me to run several sessions citrix both.) Also, when the 1 citrix session is open, if I minimize it or make another program to the foreground the .ica window becomes black and is no longer usable because you can't see anything in this window.
  Is this a known issue?
  Currently, I had to uninstall version 21 and found a version 20.0.1 Ive installed to disable automatic updates.

  Hello Souldysfunction, please try this: enter Subject: config in the bar firefox address (confirm the message information where it appears) & search for the preference named plugins.load_appdir_plugins. Double-click it and change its value to true (a restart of the browser may be needed later for the change to take effect). some information on the issue are explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/

• IMac broke with GPU known issue (alternative program)...

  In October 2015 one of my 27 "mid-2011 iMacs suddenly fell down with 'Graphics problems' making it completely unusable. I started a thread here on the forums to see if anyone could help identify and perhaps offer a solution to the problem, but unfortunately my post even never received a response.

  This is the original thread describing and showing the problem...

  https://discussions.Apple.com/message/29036314#29036314

  The iMac in Question Specs are...

  iMac i5 3.1 Ghz 27 '' (middle of the 2011 model year) 16 GB memory "

  I had almost given up and resigned from my car which is a very costly loss for me until very recently, I discovered that the problem with my iMac is actually a problem experienced by Apple and they had same (unknown to me) has launched a program to replace to fix this problem they had identified with the graphics card in some 2011 27 "iMac for free...

  Apples own page on the default and replacement program...

  https://support.Apple.com/en-GB/HT203787

  9TO5Mac about the program in question and the replacement article (which identified by a number that my iMac is one of the most affected by the GPU failure)...

  http://9to5Mac.com/2013/08/16/Apple-opens-graphics-card-replacement-program-for-quelques-MI-2011-iMac /.

  My iMac belongs to the category, the serial number ends with "DHJQ" (ie: one of those identified by Apple as having a faulty GPU)

  AnandTech article on known problem...

  m-for-radeon-hd-6970m-equipped-mid2011-2 http://www.AnandTech.com/show/7228/Apple-initiates-video-card-replacement-PROGRA...

  The problem for me is I didn't this problem because it was not until October 2015, of which he appeared on my iMac and it seems articles than apples without difficulty / replacement program ended in March 2015.

  I was wondering so that no fault of my own not knowing not this problem existed (after all how could I that the problem never arose for me until October 2105) that if Apple could let me know if maybe my iMac may still be repaired by Apple of the known program of the cause and the replacement , or least to have Apple repair my iMac at a discount price for what is after all a machine that was sold by Apple, but later identified by Apple as having a known issue with the bulk of this material.

  Ask you here as a last resort to try to save this expensive (for me) piece of kit that I got some quotes given by computer repair specialists to repair this iMac ranging more than £650 to well over 800 pounds, which, at these prices, for would make me a repair totally impossible for me to pay even less justified.

  Can anyone Apple please comment on this issue and tell me that maybe there's a chance that I can have this repair performed by Apple either free or at a fair price because it is such a shame to see such a great computer basically end up on the scrap heap, thank you.

  A powerful message, but this is a user to user forum. It is highly unlikely that anyone from Apple will never see your message.

  You must contact the Apple Support or talk with someone at your local Apple Store or authorized service provider.

• IPhone 6 IOS 9.2.1 no Service - iPhone regularly says "No. Service" even if its use is in the area of high signal. Must reboot to return to service. Is this a known issue? Any difficulty?

  Regularly receive some 'No. Service' indicator in the signal area hard. Only cure is to reboot the device. So seeing service will show the power of the full signal. When 'No. Service' of course I don't get any calls or messages. Very frustrating to ordinary, look at my phone to see if I have the service even though I know the signal is strong. Is this a known issue? No problems apart from a revision permanently and restart when 'no Service '. BTW, my android friends have no such issue when socialize us physically together. My iPhone is now the target of many jokes. Not funny for me.

  Hello! Have you tried the following?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help. Maybe it's a hardware problem (for example, with the antenna etc.).

  https://www.Apple.com/support/iPhone/contact/

• zone schedule iCal subscription

  I live in Australia, but I am a student at distance ED to Florida.

  I downloaded a calendar subscription in my ICAL and there seems to be no problem of synchronization of this info, but it is coming to us IS and I need to be able to change once this subscription in my time zone, I know exactly when assignments are due to lowered etc have to calculate 16 hours before each time.

  is this possible?

  I have other calendars (work, staff, etc.) is only this subscription I want to change the time zone.  and I changed the time zone Schedule calendar to the EAST, but then that changes ALL my calendars (ie. If I'm supposed to start work at 13:00 on tueaday it happening at 21:00 on Monday evening)

  Change the time zone in your calendar in order to take into account where you are - iCloud

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• What are the known issues with Bravia HX-925

  Hello

  Please let me know the known issues with the HX - 925 Bravia Full HD 3D TV series.

  Thank you and best regards,

  Arun

  Hi ArunHX925!

• known issues with the utilities for the Windows 7 upgrade Lenovo

  I have a Lenovo T61 Thinkpad with Vista Home Premium Service Pack 2 32-bit operating system. I have currently only about 1 GB of space on my hard drive Go 67.9. I wanted to get rid of Vista and switch on to 7 but currently I don't have enough hard disk space to do (I need at least 16 GB of free space).  I decided to buy a second hard drive and do a clean install of 7 so I hope I have less problems in the long term.

  My concern is that I ran the Windows 7 Upgrade Advisor report, and he knew questions about utilities of Lenovo, ThinkPad EasyEject Utility and system update. On the Lenovo support Web site, it says that "you can upgrade to Windows 7 without uninstalling these applications, but you may experience problems when their running on Windows 7." When I looked for another application that supports Windows 7, as advised, I found that there are none for 3 known issues of as the cause of the problem is a «limitation of Windows 7» So what the devil? I hate Vista but I do not want to install 7 and then not be able to use my computer properly.

  I'm sure many users Lenovo went from Vista to 7... can anyone give advice on what to if wait if I simply ignore these known issues?

  Thank you!

  Welcome to the forums

  You can get the update system for windows7 here

  Go through this thread for the simple problem of compatibility with windows7 to eject. Looks like you have not need this tool, once you upgrade to windows 7

  I did not understand what you mean by utility Lenovo can you explain a little more about this?