vCenter discouraged Hearbeat

Similar Questions

• vCenter Server Heartbeat v6.4 1 update necessary?

  The vCenter Server Hearbeat v6.4 Update 1 Release notes State twice:

  "If you have correctly installed vCenter Server Heartbeat v6.4, it is not required that you upgrade to vCenter Server Heartbeat v6.4 Update 1."

  Otherwise it is said to the news

  ' Support for vCenter Server 5.0 Update 1 -this version of VMware vCenter Server Heartbeat now supports of vCenter Server 5.0 Update 1.

  If anyone can clarify this? If I want to upgrade to vCenter Server 5 5 U1, I should improve Heartbeat of 6.4 to 6.4 U1 or not?

  Concerning

  Frank

  No, you don't need to upgrade. vCSHB 6.4 supports also vCenter 5.0 U1

• vCenter a physical machine to a virtual machine

  I was watching one of the videos vSphere. He mentions to add protection to the vCenter when I run it on a physical machine. Clon a virtual copy of it. Therefore, if the South physics vCenter went. I'll have one virtual to use. My question is, when I lost the vCenter, I opened the web vSphere client to the esx host that host my vCenter and it lights up?

  Thank you

  You can use the VI client to connect directly to the ESX host and start the VM vCenter.  Also check out vCenter hearbeat, http://www.vmware.com/products/vcenter-server-heartbeat/overview.html

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• 3.5 to vCenter VCenter 4

  Hello

  I'm looking to install vCenter 4 on our vCenter 3.5 has one had problems this?

  Once I installed vCenter 4 it will handle 3.5 and Vshpere hosts, all on met no problem with this also?

  Thank you

  Mark

  Hi Mark,

  I've done a few times now, and as long as you follow the guide of upgrade you'll be fine.

  The guide can be found at the following link: http://www.vmware.com/pdf/vsphere4/r40/vsp_40_upgrade_guide.pdf

  As for your question about management than a mix of versions of ESX host, considerations will install a license server to make sure your ESX35 hosts are licensed (ESX4 permitted uses codes, the license server itself is discouraged). I would also keep your ESX35 and ESX4 hosts in separate groups.

  Out of curiosity, any reason that you do not have ESX35 guests to vSphere?

  If you found this helpful, please consider awarding points

• How to stop a particular vCenter alerts

  Hello

  I know that I have asked a few questions simple and stupid these days, but believe me, I got this tool foglight for installation in our environment that I have no idea, but no other no appointment... must be done. so tried my ways.

  Scenario 1:

  I have 3 guarded vCenters currently in my FVE 8, we will do a normal maintenance on a vCenter, how can I stop all alerts for this specific vCenter. What I have to edit each rule or is it possible to stop the agent that collects the data... something like that.

  Scenario 2: I want to add a new environment of vCenter for my tool existing Foglight, how this can be achieved.

  Your prompt response will be highly appreciated.

  Thank you

  Kind regards

  Learn 2 eager

  Scenario 1 - you can create a power failure for alarms http://edocs.quest.com/foglight/5611/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=forge&file=AdministrationConfiguration/SettingUp_Ref.41.php&single=true

  Scenario 2 - you need to check if you are sized to the guarded vcenter added primarily for your follow-up global is not affected by the added objects/metric/alerts. Regarding the addition of a vcenter, you do this in the virtual environment dashboard > Administration tab.
  Follow these instructions http://edocs.quest.com/foglight/571/doc/wwhelp/wwhimpl/common/html/frameset.htm?context=cartridgeInf&file=vFogStorage-install/1_GettingStarted.28.php&single=true

  Hope this helps

  Golan

• VMware vCenter plugin to MD-storage arrays - error

  Hello community,

  I need your help by installing the plugin vCenter for MD3620i.

  After installing it, I can't use the plug-in in the vSphere client error:

  The following error occurred during the download of the plugin script of
  vCenter-IP-address/.../Configuration.xml:
  Request failed because of a logon failure. (Unable to connect to the remote server)

  What do you think could be the reason for this error?

  Thank you!

  Hello

  I have the same problem. The solution is here

  austintovey.blogspot.fr/.../Dell-MD-Storage-Array-VMware-vCenter.html

  Best greetings

• vFoglight unable to connect to vcenter after disabling sslv3 7.0

  Y at - it a patch for vfoglight 7 which allows for connectivity to vcenter TLS?

  After you disable SSLv3 in vcenter, foglight is unable to connect.

  [Quartz [0] - 90] ERROR com.quest.agent.esx.task.RelationsTask - error when running: ERROR: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  java.rmi.RemoteException: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:183)

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:125)

  at com.vmware.vim25.ws.VimStub.retrieveServiceContent(VimStub.java:1409)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:85)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:69)

  at com.quest.vmware.api.connection.VIService.connect(VIService.java:60)

  at com.quest.vmware.api.connection.VIService.login(VIService.java:82)

  at com.quest.agent.esx.task.ESXAgentTask.connect(ESXAgentTask.java:178)

  at com.quest.agent.esx.task.ESXAgentTask.run(ESXAgentTask.java:116)

  at com.quest.agent.esx.ESXAgent.runTask(ESXAgent.java:407)

  at com.quest.agent.esx.ESXAgent.esxRelationsCollection(ESXAgent.java:469)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.services.EquivalenceInvocationHandler.invoke(EquivalenceInvocationHandler.java:70)

  at com.quest.glue.core.agent.AgentInteractionHandler.invoke(AgentInteractionHandler.java:186)

  to com.sun.proxy. $Proxy55.esxRelationsCollection (unknown Source)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.invokeCollector(CollectorCallback.java:162)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.execute(CollectorCallback.java:130)

  to com.quest.glue.core.scheduler.quartz.QuartzScheduler$ ScheduledTaskSequentialJob.execute (QuartzScheduler.java:716)

  at org.quartz.core.JobRunShell.run(JobRunShell.java:202)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

  at java.lang.Thread.run(Thread.java:662)

  2015-09-01 15:25:31.798 ECHO FATAL [Quartz [0] - 90] com.quest.agent.esx.task.RelationsTask - the agent could not establish an SSL secure connection to the VirtualCenter.  Please check your configuration of the agent in order to ensure a connection correct information has been entered.

  2015-09-01 15:25:31.798 ECHO

  Thank you

  Hi JLAPRADE,

  I read a similar case, it seems that the problem could be solved either:

  1) that allows SSLv2Hello to vCenter, or

  (2) upgrade to the latest Foglight/Agent managers to the latest version.

  Regarding the #1 option:

  Client configuration file updated the vpxd.cfg in vCenter. It's the line that needs to be changed:

  TLSv1

  To add the SSLv2Hello Protocol, the client he added after a comma:

  TLSv1, SSLv2Hello

  This solves the problem for this client, but you can check with VMware.

  If the problem persists after trying these solutions or if you have problems, their implementation, please open a request of Service (SR) with the support and mention this thread.

  This is where an SR can be created: support.software.dell.com/create-service-request

  Concerning

  Gaston.

• Problem with OpenManage integration for vCenter - OMSA status: update required

  Hello

  We have a problem with the configuration of OpenManage integration on a vSphere 5.5 U2 Cluster. We have deployed IMO for vCenter v 2.3.0 build 290 aircraft, and we have installed manually OMSA VIB v7.4.0.2 on our 5.5. U2 ESXi hosts.

  The question we face is respect for vSphere host - when we start the Wizard "Fix Non compliant vSphere Host" it displays the correct version of the OMSA - 7.4.0.2 but OMSA status is "required update".

  Whe test us the connection to hosts using "Test the connection profile", it hangs at 0% and will be never finished.

  Also in the OpenManage integration in vSphere Client "Frimware" tab option is grayed out.

  Please indicate how we can make this work?

  Concerning

  Milan

  Well, I did some research more and found that ESXI 5.5 U1 and U2 don't are not supported by OMSA right now.

  FTP://FTP.Dell.com/manuals/all-products/esuprt_software/esuprt_virt_solutions/Dell-Mgmt-plugin-for-VMware-Center-2.3_Release%20Notes_en-us.PDF

  ESXi 5.5 U1 and U2 are supported only for the OMIVV on the servers of 12th and 13th generation who are capable of out-of-band management and require no OMSA must be installed on the host system. We intend to add a supported of the OMSA version at a later date.

  Thank you

• Error 2000000 charge Assembly of the OMIVV 3.0 and 6.0 vCenter

  We have recently installed vCenter 6.0 in our laboratory. I downloaded the OVF OMIVV and deployed a new instance of the device. (I experimented with 2.3.0 in the past, but has never run, just so threw it out). The connection to the vCenter took place without a hitch, but the web client shows a dialog "Error 2000000" whenever I click on through the interface. When I used the first Setup Wizard, I was able to enter all of the passwords, but the list of guests was empty, even though this vCenter has 8 fasteners. Without being able to choose a host, I was not allowed to go forward through the wizard.

  It seems that this error has been reported in older versions, but it is slightly different in OMIVV 3.0, so I thought I should start a new thread. It is said:

  An unknown exception has occurred and has been recorded in the extended papers.
  Severity: CRITICAL
  Error: 2000000
  Date and time:
  Details:
  An unknown exception has occurred and has been recorded in the extended papers. If the problem persists, restart your device. If this does not resolve the problem, contact Dell technical support.

  Things I've tried:

  -Enable and disable the web proxy settings (no change of behavior)

  -Unplugged then replugged the vCenter in the administration several times

  -Make sure the vCenter and OMIVV device are on the same network, with no firewall between

  Re-recorded the vCenter using the domain name FULL official, such as name-> digital-> name in same name results returned

  I downloaded the package support and looked through the logs, but do not see anything obvious. I'd be happy to start over and upload files or a clean log file if it would help.

  Tips on where to go from here?

  Joseph Jackson,
  Computer services
  Carnegie Mellon University.

  Hello

  Of course relates to the certificate that changed for personalized certificate.

  Please follow this KB

  vCenter # validation error server certificate in VMware vCenter Site Recovery Manager and other solutions that run on a separate system
  KB.VMware.com/.../2109074

  We are going to redirect to thw KB which depend on your type of (distinct from the PSC or Embedded) infrastructure deployment.

  Now we're working for one of my clients.

  Good day.

• Space free divergence, esxi/vCenter Storage Manager

  This data shows 231GB free in vCenter store and 760 GB free to HDS (see table)

  How can he show more free to HDS in vCenter? Given that HDS does everything by Thin Provisioning?

  I feel that I'm missing something hahaha

  I mentioned to the Compellent support too, the guy had a look and couldn't see quite why and he will discuss with others and get back to me.

  I don't know that it must be something simple that I'm missing?

  

  Using VMDK provisioned end or thick?

  If you have created your virtual machines with thick VMDK, you VMDK which is great in VMware, but will be considered void by the HDS. HDS didn't write zeros and will show the free space.

• Volumes vCenter and VMware virtual multiple servers

  I have a band EQ that allows storage of two vCenters. I have VVols work on vCenter #1, but cannot create vCenter VVOLs #2. I found this general post online and wonder if I can give you only a single container & VVol of total and that's why I can't create my second vCenter VVOLs?

  Today many suppliers do not support a single storage container that includes an array of entire storage.

  Today most of the suppliers are supported unique endpoint of Protocol for the entire storage table.

  vSphere-Land.com/.../Comparing-Virtual-volume-vvol-Limits-to-vmfsnfs-Limits.html

  Please specify the fact that.  I suggest that you open a support case.  May be that the supplier of VASA was not record correctly.

  Don

• How to change the MOB OpenManage integration for vCenter Server registration

  A few months back, I've updated our installation of the vCenter for v2 plugin, now called OpenManage integration for vCenter Server. When you perform the upgrade, we have kept the old base done vs a new installation. During the upgrade process, we deployed the new device under a new name of the computer.

  Everything works well except that we noticed an annoying thing. Registration of the plugin is the former name of the server instead of the name of the new server-oriented. It is validated by looking at the web page MOB: http://vcenter Server/fmt drilling then down through:

  Content--> Extension Manager--> extensionList ["com.dell.plugin.OpenManage_Integration_for_VMware_vCenter"] --> server--> URL string

  The configuration of the appliamnce shows the correct new name of the device and the administration console is accessible via the new name for the device. The only place where we see the old name of the device is in the MOB config.

  We tried to remove the plugin and added, but still cannot change the value of server URL to reflect the new name of the device. Until we solve this problem, I work around the problem by keeping just the DNS entry for the old name of the server in DNS.

  Anyone know who to change the property MOB for the URL of the server?

  I solved the problem.

  I found the following article that shows how to upgrade the extension. I just cut and paste into my current values with the URL of update and now all is good.

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2060127&sliceId=1&docTypeID=DT_KB_1_1&dialogID=236869583&StateID=0%200%20236885165

• Version 3.0 on 5.5 vCenter using vSphere client

  New vCenter 5.5 (build 2646482) most recent of the VMware Web site.

  vSphere client 5.5 (of course)

  Brilliant new V3.0 of OMIVV

  Installation device and registered in vCenter without error.

  Seems to work in the VMware web client (I'm still exploring). I can manually add servers iDRAC.

  Since the heavy Win32 client, I don't get the Wizard but I get an empty bar in the middle of the screen with "Error #2048" down at the bottom.

  My client is Win7 x 64 with IE10 default browser.

  Where to start?

  See you soon

  Ian

  Hello Ian,

  Try the following steps:

  1. Disconnect and connect to VMware Desktop client (thick client).
  2. Go to home > hosts and Clusters > select any host Dell > click the tab "OpenManage Intégration" and wait for it to load
  3. Now, click on Home > Dell Management Center, it should work now.

  Let me know how it goes.

  Thank you

  Vikram KV

• Problem installing OpenManage for VMWare vCenter integration

  Hello

  I'm trying to use Dell OpenManage integration with VMWare vCenter and have downloaded and deployed with the OVF file.  The virtual machine appears to have installed correctly and I recorded 2 servers by IP address vCenter.  I can connect to the DellAdminPortal page and sign in.  In the Administration Console under vCenter record I see two vCenter server and I get the message

  Success

  The vCenter 172.17.1.30 has been saved successfully. Open a new client vSphere for vCenter 172.17.1.30 so that the changes can be implemented.

  However when I connect to my with the Web Client vSphere vCenter I don't see the icon Dell OpenManage integration under the Administration category.  What Miss me?  I also checked the Administration-> have management and I can only see vCenter Orchestrator, Log Browser and SSO Admin UI Plugin.  About Dell OpenManage.

  I have connected several times and have even restarted the VM OpenManage, but nothing appears.  Any suggestions on what I can do to get this race?

  Thank you

  Scott

  Our web customer support is for vSphere 5.5 only. Please make sure it's the version of vCenter that you run.

  "If you are on 5.5 check if there are two plugin files in C:/ProgramData/VMware/vSphere Web Client/vc-packages/vsphere-client-serenity /" If there is, we have seen that removing the oldest file and restarting the blank Server fixed this issue.

• uninstall the plugin vcenter and start again

  I was able to install and configure the virtual appliance and the plugin, but after using the functionality of the virtual appliance upgrade, it would barely work and recovered memory errors so I thought I would start just above. Reinstall the virtual appliance has been easy, but when I try to save it as a virtual centre I get an error saying that there is already a registered to this virtual Center. How can I remove it to vcenter so that I can save my vceter with the virtual appliance?

  The method: "com.dell.plugin.Dell management plugin" apply to device version 1.7 and below.

  For versions after 2.0 and above all, follow these steps:

  1. enter http:///mob.

  2 Select the link to the content.

  3. Select the ExtendManager link.

  4. Select the UnregisterExtendsion link.

  5. Enter the key of the extension to unregister: " com.dell.plugin.OpenManage_Integration_for_VMware_vCenter_WebClient" , and then click InvokeMethod

  6. Enter the extension key to unregister: " com.dell.plugin.OpenManage_Integration_for_VMware_vCenter" , and then click InvokeMethod

  7. in the vSphere client, turning off the appliance Plug and remove it.

  Thank you

  Vikram KV