vFoglight unable to connect to vcenter after disabling sslv3 7.0

Similar Questions

• View Connection Manager is unable to connect to vCenter after upgrade to vCenter 5.0

  Our upgrade to vCenter Server 5.0 went smoothly and that our environment is transferred to ESXi 5.0.   However, since the upgrade our environment view seems not to be connected to vCenter.  If I go to view administrator > Configuration > servers and change the entry for our vCenter Server I get a connection failure message when you click "OK".

  I checked that the username and password specified to connect to vCenter administrator mode are correct.

  4.6 and earlier versions is not supported and will not work with vSphere 5 (look on the VMware compatibility matrix). I am bitten by this before so I checked that before even thinking about updating to ESXi 5. You need to wait seen 5.0 for compatibility with ESXi 5.

• Unable to connect to vcenter after change of firewall

  Try to solve my backups VM Explorer, by default, on a single host I enabled ports NFC ()) - 23, 1024-65000. It was not checked, so I checked and limited to a subnet that guests and almost all of the virtual machines are in. As soon as I put it, my vsphere client began to turn and gave me connection errors. So, I used a vpn to connect to a windows server in this subnet and IE to connect to the web client. I always get connection errors.

  Since all hosts and most of virtual machines, including vcenter, are in this subnet, why should I be cut off? I can ssh in this host, so is there a process I can kill?

  Thank you.

  Update:

  Not the port of the NFC. It was ports connector vm series, which included the ports incoming and outgoing used by our iscsi san and that's why everything went to hell. I should have allowed the rule but left everyone rather than define a subnet restriction. I managed to enter the host itself and reset the Firewall setting, then restarted vcenter. Everything nice fixed now. Waiting to hear if any data has been watered.

• Can not connect to vcenter after reboot

  Hello VMware,

  I can not connect to vcenter after reboot with the error «Failed to connect to the Vmware research service»

  

  I tried to follow below doc but no help.

  http://www.myvmwareblog.com/2012/11/28/lookupservicesdk-SSL-certificate-verification-failed/

  I tried to play with the Vcenter screen underneath, but no luck.

  
  

  To resolve this problem, replace the VCSA IP with hostname VCSA in the search service configuration file, ls_url.txt file.

  To replace the VCSA IP address with the host VCSA name in the ls_url.txt file:

  1. Connect to the VCSA via ssh under the root user
  2. Go to the directory/etc/vmware-sso using the command:

     CD/etc/vmware-sso

  3. Make a backup copy of the file ls_url.txt using the command:

     CP ls_url.txt ls_url.txt.bak

  4. Open the file ls_url.txt using a text editor
  5. Replace the VCSA IP address with the host name of the VCSA. For example:

     https:// Lookupservice/XXXXXXXXXX/sdk

     Where XXXXXX is the host name of the VCSA.

     Note: It is usually the host name of the domain the VCSA FULL name. Make sure it matches the common name (CN) in the certificate name.

  6. Restart the VCSA services by running the command:

     restart the /etc/init.d/VMware-vpxd
     restart the /etc/init.d/VMware-SSO
     restart the /etc/init.d/VMware-InventoryService

     Or

     Restart the VCSA.

  Alternatively, you can use this workaround to regenerate the certificates for the vCenter Server Appliance.To to regenerate the certificates for the vCenter Server Appliance:

  1. Temporarily change the IP address of the vCenter Server Appliance to a different IP address, not used
  2. Restart the vCenter Server Appliance
  3. Change the IP address of the vCenter Server Appliance to the originating IP address
  4. Restart the vCenter Server Appliance
  5. Connect to vCenter Server Appliance, https://vcenterserveripmanagement Web page: 5480
  6. Click the Administration tab, and then select Yes to certificate enabled regeneration
  7. Click send to save the changes
  8. Restart the vCenter Server Appliance

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• When I change authentication to LDAP (EMbedded LDAP) vco for test, vco client is unable to connect to vcenter. Can someone tell me what is the problem I have

  It is seemly all things are OK configuration web page

  But vco client is unable to connect to vcenter

  Have a screenshot of the vCenter plug-in would help.

  If it is set at the session by the user that the vCO will try to authenticate with the LDAP credentials embedded on the vCenter which of course will fail.

• OfficeJet Pro 8600: Unable to connect printer OfficeJet after update Win10

  I had my Officejet pro 8600 perfectly connected wireless to Win 7 for several years.

  After the update to Win10, I am unable to connect to the printer. The printer status shows that driver is not available.

  I checked Win10 and Adobe by other suggestions from the forum. both are up to date with the latest version.

  I uninstalled and reinstalled the printer Win10 driver and the download driver HP. None succeeded.

  Run the convenience store Win10 shows that the print spooler cannot be started. He is set to start automatically, but is currently stopped. I can not start it manually, and it does not start after a reboot.

  The fixed! I found the following information on a page of the Microsoft Help forum:

  Thanks to http://www.registryrecycler.com/blog/2013/12/how-to-fix-printing-error-in-windows-8-1/ for the fix.

  Apparently, the Windows 8.1 updates had the same problem.

  Editing the registry is necessary. Make sure that you have a backup of the registry before making changes.

  • Press the keys Windows + R on your keyboard to open the run box.
  • Type regedit in the box run and press Enter to open the registry editor.
  • Confirm the UAC message by clicking on the Yes button.
  • In the left pane of the registry editor, expand HKEY_LOCAL_MACHINE to find the key below.
  • SYSTEM\CurrentControlSet\Services\Spooler.
  • While the spooler key is highlighted, you can navigate the right pane to assign the value DependOnService.
  • Double-click the string value to change the data.
  • The data in the value field should contain the text saying RPCSS, followed by http in the next line.
  • Select and delete the letters http and click OK to save your changes.
  • Leave the part of RPCSS to the value data as it is written.
  • Close Registry of Windows and restart your computer.

• Unable to connect IDE device after upgrade to 10.3.1

  Hi all

  I had updated the BlackBerry smartphone to 10.3.1, and after the upgrade, I am unable to connect my machine to Momentics IDE or deploy an application on the device of comand prompt.

  When I try to deploy from the command prompt, I get the following error.

  Error: Cannot connect: Connect to /169.254.0.1:443 timed out. Please check IP address settings for the target. You may have to reboot the target.
  

  Development on my device is set on IT.

  Concerning

  I had mode developer cross checked several times, but without success.

  Problem is solved.

  I deleted the data unit and then installed the upgrade pushed by Blackberry. Magic happened and it started working.

• Unable to connect to vCenter Server 5.0 using the vSphere Client - unknown error.

  I am trying to connect to vCenter using vSphere client (from different computers, including the server itself) and get this:

  vSphere Client could not connect to "vCenter_Server_IP_Address".
  A unknown connection error has occurred. (The request has failed because of a logon failure. (Unable to connect to the remote server))

  I am able to connect to the host directly, but of course, can't do anything with it since the vCenter is "in da house".

  There is no problem with it, not big changes and nothing indeed directly on the server vCenter (i.e. W2008r2x64) so, my confusion deepens. 5.1 ESXi

  Any ideas what could have happened and how to fix it?

  observe the following error in the logs.

  2014-04 - 04T 13: 35:23.506 + 01:00 [error 02720 "Default" opID = SWI-f3a52464] [VdbStatement] given the driver diagnosis are 42000:1:1105: [Microsoft] [SQL Native Client] [SQL Server] could not allocate space for object ' dbo. VPX_EVENT'. 'PK_VPX_EVENT' in 'VIM_VCDB' database because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, a

  Follow this article to fix the problem.

  http://alexjs.EU/VMware-ESX-and-a-full-SQL-Server-database/

• Unable to connect to vCenter Converter Server and failure to register the extension

  Hello

  Recently, I was doing the following error on our vCenter Server server while trying to import a virtual machine - "unable to connect to the server vCenter Converter Server.

  I followed the recommendations of the other post of the community http://communities.VMware.com/thread/239203 However, I still get the same error.

  I tried to run a repair on vCenter Converter of add/remove programs however I get the following error:

  "Cannot save the extension.

  I restarted the server as well and still no change.

  Any ideas?

  If you have changed the IP address on the VC, your best option is probably uninstall the Update Manager and converter, once again.  delete their directories under \program files\vmware\infrastructure\ installation, restart and install again.

• Unable to connect to WIFI after upgrade windows 8.1

  Hello

  I fortunately was connection to my wifi at home last night before my HP Pavilion notebook updated to windows 8.1 g7. Now, I can only connect via ethernet cable.

  I called Microsoft Support and I was told that my wifi driver was outdated and must be reinstalled. I had a look at downloads available for the network drivers, but I'm not sure how to establish that that I need... There are 4 options.

  In the Device Manager > network adapters, it there was only one pilot who needed according to this update. The Realtek PCle FE Family controller. When I checked the updates here is said that it was updated successfully, but I am STILL unable to connect to the internet.

  Microsoft say it is a problem of HP, not them. Help, please.

  Thank you

  Hello

  My suggestion: using Device Manager to uninstall the Wireless driver and reboot the machine. Machine should say new hardware installed and find the good jerking for you OR you can download driver Realtek (wireless) from the above link and reinstall it.

  Kind regards.

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• Unable to connect to Vcenter Server

  I couldn't connect to vCenter Server when you use the web client of vSphere. The administrator accesses vCenter Server by using the customer earlier in the day. ?

  Verify that the vCenter Single Sign-On service is running on the server vCenter Server

• License is disabled and unable to connect to internet after Vista Home Security 2012 malware

  Original title : Ceased to be able to connect to the Internet and Messagesays invalid Vista

  No longer can connect to the Internet will pop up saying threat privacy, another attack Vista Home Security 176.224.57.149 Alert 2012 port 45168.  Then an internet window saying Windows Security Center. Now, he also says that my licende is not valid.

  Hello

  Vista Home Security 2012 is Malware.

  The link provided in this answer read the different names that it goes under and the recommended uninstall information.

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2012

  As you are denied access to the Internet > press F8 at startup > in the list of available options select Safe Mode with networking by using the arrow keys > press > now you should have access to the Internet, unless you are using a wireless connection, follow the instructions to remove on the link provided. If you are using wireless on a laptop computer, use an Ethernet cable connection.

  See you soon.

• Unable to connect to vCenter Webservice

  ESXi 5.1.0 1117900

  vCenter Server 5.1.0 1123961

  I installed vCenter Server with Server Single Sign-on and all is well until I tried to connect to the Web Service.  No matter what I tried I couldn't open the session, except after the installation of authentication Session of Microsoft.  I can connect successfully with Windows authentication, but not with vCenter authentication.  During installation, the user name was gray with admin@Service-Domain.  My domain name is spatialhaze.com, so I've been using [email protected] and the password I put without success.  Any guidance would be appreciated.

  TIA,

  stmux

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.vSphere.install.doc/GUID-6BDE5582-DFCD-4d2D-BD09-016B2C4D1CF7.html

  By default, the admin@System-Domain user can connect to the Web Client vSphere and vCenter Server

  Here the user name is "admin@system-domain" which is the default user for authentication UNIQUE/Single Sign On account