VCenter Server 5.5 update question

Similar Questions

• problem with vCenter Server 4.0 Update 1

  I have ower vCenter Server 4.0 Update 1 upgrade in December, somehow the version number is not right.

  The build number of the show is always 208111 if I trie to reinstall the update 1 only, I can completely uninstall the vCenter Server.

  So, the update seems to be installed anyway nor 100% corectly.

  The vCenter Server Loggenerator also shows me the 208111 build.

  Because of this I also can't update the last Patch1 for Update Manager.

  Way to go VMware... I love how just release notes say "run Setup". Of course, it was all buried a few deep records, not at the root of the zip file.

• VMware vCenter Server 2.5 update 4 on Windows 2008

  Hello!

  Does anyone know if VMware vCenter Server 2.5 update 4 is supported on Windows 2008?

  Thank you to

  Windows 2003 64-bit is also supported for vCenter Update 2.5 4?

  Lol only 32-bit.

  Is supported by VC4.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Upgrad question, vCenter Server 4.0 Update 1

  Hi all:

  This is my first post, and it's really stupid!  HI HI!

  I look at my Server vCenter.  In the help about it says: I'm on the #208111 build.  But apparently the update 1 build # is: 208156 build?

  When I download the ISO for the full install of update 1, it says I have to remove my vCenter continuous server rather than upgrade offer.  I found the Patch 1 file that says she is replaced by installing already on the server.

  What I am doing wrong?

  you are in the correct version for vCenter4 U2.  The other version number you see includes all modules

  VMware vCenter Server 4 and modules

  Installer of VMware vCenter Server (build 208111), VMware vSphere Client (build 208111), VMware vSphere Host Update Utility, VMware vCenter Update Manager (build 208126), VMware vCenter Converter (build 206188), VMware Guided Consolidation vCenter and VMware vCenter Orchestrator. Available in English, German, Japanese, and Chinese simplified.

• vCenter Server Appliance audit update hangs

  Hey all,.

  I wanted just to update an application vCSA. Unfortunately, it crashes in the status "check updates aivailable..." "that doesn't have internet access.

  I changed the parameters of the CD-ROM updates, mounted the iso update-repo and restarted the unit, but no luck, it always is when checking for updates mode.

  Someone has any idea how to stop this process? As the driver and install the update buttons are disabled when searching for update.

  Thank you

  Tim

  Thanks for the help guys.

  Unfortunately, the process was not ready to expire, even with local hosts entries.

  Then I opened a SR and GSS guys were able to help me.

  The solution was to trigger the scan and update the command line. If the device is now updated and the update tab in the web interface works as expected now.

  1. connect the device with SSH

  2. / opt/vmware/bin/vamicli update - check

  3. update/opt/vmware/bin/vamicli - last install - accepteula

  Concerning

  Tim

• vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

  Hi all

  I have a question to which I did not respond.

  I have an ESXi 5 on Proliant DL380 G7 server host. I want to install vCenter Server and Manager Update on one of the Server 2008 R2 VM on the same host. I know it's possible, but my question is how Update manager will provide updates to the same ESXi host it will run on? The update is applied every time host must spend in maintenance mode and power off the virtual computer running on this subject which means he'll kill VM where vCenter Server and Update Manager is running and the update will fail right?

  Is that possible at all or the VCS and UM such as a virtual computer operating point is updated to other guests if you have them or vMotion as VM to another host when you want to update the VCS and UM host is running?

  Thanks in advance.

  It will not work.  You will need at least two hosts.  This way you can vMotion the vCenter VM to another host.  From there, you can use VUM.  Otherwise, you will need to patch the host as a stand-alone host.

  See below for patching a standalone host

  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

• Service component of VMware Manager fails to start in vCenter Server 6 Update 2

  Hello

  A brief idea of my test environment:

  VCenter servers:

  VC1 - recorded at the psc1 in Site1

  VC2 - recorded at psc2 in Site2

  External Services platform controllers:

  psc1 - Site1

  PSC2 - Site2

  SSO domain: vsphere.local

  I upgraded from vCenter Server 5.5 update 3d to vCenter Server 6.0 Update 2. VCenter 5.5 servers had integrated / embedded of SSO and all services running on the same machine and were in modes related before the upgrade and I have them removed modes related before the upgrade. They have been upgraded to vCenter Server 6.0 with Embedded PSC and they entered automatically improved Linked Mode (ELM).

  After the previous step, I deployed the PSC external psc1 respectively 2 and psc2 mode of replication with vc1 and vc2 in the same site Site1 and Site2. I migrated then boarded two PSC vCenter servers to their respective partners external PSC of replication by running the command cmsso-util reconfigure - repoint-PSC "psc1/psc2" - administrator user name - domain name "vsphere.local" - passwd "Hasło_Administratora." This operation ended successfully and my vCenter have been reconfigured as vCenter Server with external CFP.

  After that, I followed article KB VMware 2127057 (agreements ofdetermination of replication and the State with the service controller 6.0 platform (2127057) |) The VMware KB) do psc1 and psc2 external replication of the PSC 2 partners either by running the command vdcrepadmin-f createagreement-2--h psc2.clifford.local h psc1.clifford.local u Administrator w 'Hasło_Administratora '. I ran this command psc2. Also, this operation succeeded, and when I ask the State of replication of the psc1 of replication partners and psc2, there is nothing wrong. However, after restarting my vSphere Infrastructure, I see that vc1, psc1 and psc2 have all their services started successfully.

  VC2 services seem to be failing, especially the service component manager of VMware which is required for many other services start. The VMware HTTP Reverse Proxy service starts properly and I have no IIS role / feature installed on my machine. The error message that occurs when you try to manually start the service is also attached as a file Error2.JPG in the discussion. The Windows event log error is as deeply as the file Error3.JPG in the discussion.

  Please let me know how to solve this problem as soon as possible.

  Well, I found a solution myself.

  In fact, after I created the external PSC 2 psc1 and psc2 partners of replication of the vc1 and vc2 in Site1 and Site2 respectively, I had to immediately follow section KB VMware 2127057 in order to create a replication agreement between the 2 external to the PSC psc1 and before psc2 I reconfigured and show the vCenter servers vc1 and vc2 of on-Board of the PSC outside the PSC following the VMware Documentation (Center of) VSphere documentation 6.0).

  That's all.

  Thanks to all for looking into it.

• VCenter Server first to 5.5.0U3b update and later update of VMware ESXi ESX / will I have problems?

  Hello

  have trouble when I first updated my signature single vCenter Server and later update my vSphere hosts?

  A vCenter Server Version 5.5.0U3b should be able to manage vSphere Host Version 5.5.0 GA, right?

  Kind regards

  Roland

  The vCenter Server 5.5 update 3 b can manage VMware ESXi ESX release GA to 5.5 5.5 update 3 b, take a look: VMware product interoperability Matrices

  BUT, according to the interoperability matrices and vCenter Server 5.5 update 3 release notes, VMware strongly recommends you upgrade your hosts to 5.5 update 3 b, see:

  What's new

  • Update Support for the SSLv3 Protocol is disabled by default
    Note: In your vSphere environment, you must update vCenter Server vCenter Server 5.5 update 3 b before the update to 5.5 ESXi ESXi update 3 b. vCenter Server will not be able to manage 3B ESXi 5.5 update, if you update ESXi before update vCenter Server to version 5.5 update 3 b. For more information about the sequence in which vSphere environments must be updated, see KB 2057795.

  • VMware strongly recommends you update ESXi hosts to ESXi 5.5 update 3 b management of vCenter Server 5.5 updated 3B.

  VMware does not recommend the reactivation of SSLv3 because of the vulnerability of POODLE. If all you must enable SSLv3, you must activate the SSLv3 Protocol for all components. For more information, see

  KO 2139396

  .

  • Resolved issues. This version of vCenter Server 5.5 update 3 b solves the problems that have been documented in the resolved issues section.

• VCenter server 5.1 patch 1 switch to 3 update?

  Hi people,

  Did anyone here know what is the best way to run Windows VCenter Server 5.1 update 1 in 3 update without problem?

  Because previously there are so many problem in SSO JRE if the upgrade it will not be a veil of sweetness.

  If anyone here knows what else to please share it here.

  Thank you.

  So in my case here, I can make my VCenter update 5.1 upgrade inline 1 in VCenter 5.5 Update 2?

  Yes, you can go directly to the version 5.5 Update 2 on the same path that you go to version 5.1 update 3... Simply run the installer and the old version will be detected and the installer will offer you the upgrade.

  To avoid warnings, make sure to follow the best practices: VMware KB: recommended vcenter Server 5.5 upgrade

• VCenter Server Update

  In an environment with hosts of ESXi and vCenter server, ESXi 5.0 hosts have been updated to update the 2 just now. Everything works fine, however, Server 2012 64 bit does not appear as an option when you create a virtual computer in vCenter with the vSphere client. Research indicates prerequisites 2 update is necessary to do so, that is applied to the ESXi hosts. The vCenter server has not been updated and it is not possible to still go to U3. ISO has been uploaded to the vCenter update 2 with modules. What is the procedure to update the vCenter server. The update can be checked before hand and guests must stand, so I wanted to just get a sense of the update. What is the executable launched just for the new ISO? The installation as an update or new feature will install? Guests must go down? Thank you very much in advance for any help.

  Yes, simply run the installer of vCenter and media when prompted on the vCenter server database, select upgrade the existing vcenter Server database... your virtual machines will not be affected and do not need to be moved to another host.

  You're welcome and don't forget to award points for correct or helpful answers.

• vCenter Server Heartbeat v6.4 1 update necessary?

  The vCenter Server Hearbeat v6.4 Update 1 Release notes State twice:

  "If you have correctly installed vCenter Server Heartbeat v6.4, it is not required that you upgrade to vCenter Server Heartbeat v6.4 Update 1."

  Otherwise it is said to the news

  ' Support for vCenter Server 5.0 Update 1 -this version of VMware vCenter Server Heartbeat now supports of vCenter Server 5.0 Update 1.

  If anyone can clarify this? If I want to upgrade to vCenter Server 5 5 U1, I should improve Heartbeat of 6.4 to 6.4 U1 or not?

  Concerning

  Frank

  No, you don't need to upgrade. vCSHB 6.4 supports also vCenter 5.0 U1

• Physical to virtual (P v) Conversion of vCenter Server

  What are all the things I need to think about when convering vCenter server from one physical machine to a virtual machine?  For example:

  1 if the SQL database is on the same server, it can be corruputed?

  2. If I create P to V would be vm and let it sit for a day, while the physical vCenter server is in place, what is happening with Active Directory when I stop the physical and virtual vCenter server takes over?  The vCenter Server virtual would have a less recent synchronization with Active Directory than the physical server, I just stopped.  No problem?

  StageCoach says:

  No unjoining and join vCenter server to this domain questions all possible - such as the loss of permissions, etc that I need to be wary of?

  nothing whatsoever.  vCenter has all it's information stored in a database.  The reason for the possible reach of the field is just to update the AD and DNS object

• Und vCenter Server ESX Patch Abhangikeiten

  Hallo zusammen,

  WIR betreiben zur Zeit Vcenter Server in Version der 5.5u1 mit ESX Server auf der gleichen Version. WIR wollen die approximately auf 5.5u3 al environment. As das update

  the Vcenter Server haben wir eine unavailability die aber sehr knapp bemessen ist. WIR können die schon auf 5.5u3 al before ESX host? ICH habe leider nichts found was

  ER clearly verbietet oder allows...

  Danke fur Tipps

  Alex gruss

  Willkommen im Forum,

  vCenter Server 5.5 updated 1 supported lt. VMware product interoperability matrices alle current ESXi 5.5 - ER versions (and more), d.h. die update-Reihenfolge ist in diesem Fall in beliebig.

  Noch zwei short Anmerkungen:

  • every Update 3 should besser Update 3a zum Einsatz kommen (see http://kb.vmware.com/kb/2133118)
  • a so auf den vCenter servers sonst noch? I.d.R. ist eine unavailability as vCenter Server Dramatisches nichts. HA works auch ohne vCenter, nur die administration und z.B. vMotion/DRS etc. nicht really werden können.

  André

• vCenter Server 5.5 and Oracle 10g DB

  Anyone know if any problem of operation of vCenter Server 5.5 on a DB Oracle 10 g?

  The support matrix shows no support, however, I find that there is also no support for Oracle 12 c matrix, but I find that the vCenter Server 5.5 Update 2 Release Notes indicates that it supports Oracle 12 c.

  There is a problem of execution of vCenter Server 5.5 on an Oralce DB 10 g?  Thank you.

  The support matrix shows no support, however, I find that there is also no support for Oracle 12 c matrix, but I find that the vCenter Server 5.5 Update 2 Release Notes indicates that it supports Oracle 12 c.

  The database support matrix VMware shows in fact that Oracle 12 c is supported for the database of U2 vCenter 5.5:

  VMware product interoperability matrices

  

  10g, however, is not supported. It can work if you follow the same instructions (see the documentation for vCenter 5.0 where it has supported), but it is not supported by VMware.

• vCenter 5.1. Update 3 has no upgrade path?

  The path to upgrading Solution of the matrix of interoperability shows that there is no way to upgrade available in a vCenter Server 5.1 updated 3 or ESXi 5.1 update 3.

  I'm having a hard time to believe that the latest patch for the 5.1 versions cannot be upgraded.  Normally a reconstruction would do the trick, but there are built-in replication and SRM and I need to upgrade in place.   Anyone upgraded the 3 to 5.5 5.1 update update 2 or whatever it is between the two?  I really hope it's just a bug in the interoperability matrix.

  Indeed, this seems odd. However, from the date where the 5.1U3 has been provided (5.1U3 in 12/2014 - 5.5U2 09/2014) there is a good chance that 5.1U3 already contains code that is not integrated in the 5.5U2 yet, but might come with 5.5U3.

  André