Vcenter Server Question database - can't see any clients

Similar Questions

• Inspiron 6000 can not see any hard drive.

  Inspiron 6000 can not see any hard drive.

  Readers can be seen and accessed by other machines.

  The BIOS seems to be set correctly, not that there is much that can be done for her.

  Seems that the motherboard is the question.

  Other thoughts?

  ST: FX34091

  
  

• Can not see any of the website features especially icons to link

  Can not see any of the website features especially icons to link

  See:

  • http://KB.mozillazine.org/Website_colors_are_wrong

• I can't see any image without opening it.

  I can't see any image without opening it. In a folder, I can see only the file and image files, not small image. Like, if I have 20 photo in a folder, I can see them in small sizes and then I manually open whoever I want. But I don't see them in small sizes in the folder.

  Method #1
  Start > in the search box, type Folder Options > press the Enter key > click
  View tab > uncheck always "show icons, never thumbnails" > OK

  
  Method #2

  Start button > Control Panel > Classic view > systems > left column, system settings advanced > Performance tab, click on settings > tab Visual effects, click 'Show thumbnails instead of icons' > OK

• ESXi installation before vCenter Server?  How can I get vCenter Server on a virtual machine on ESXi servers?

  My plan for a new vSphere Essentials Plus 5.5 U2a installation is to have the vCenter Server on a virtual machine on the servers of the host on which is installed ESXi.  However, all the installation instructions I found indicate the user to first install the vCenter Server.  How can I get vCenter Server on a virtual machine on ESXi servers?

  Thank you for your help.

  Hi munkyman welcome to communities.

  After you have installed your first ESXi host, open a browser and go to https://your-ESXi-ip-or-FQDN

  You can download the vSphere Client here. It is a windows application that you can install on your desktop. It is often referred to as the "c# Client vSphere" in communities and blog posts, because it is a new implemented in the vCenter Server Web client.

  But for the beginning, install the vSphere Windows Client. You can then launch it and connect directly to your ESXi host. Here you can create your first virtual machine, which can be the VM vCenter (installation of Windows or device, that is you).

  You can use the web client or connect to the Server with the client c# vSphere vCenter VCenter runs.

  Tim

• iSCSI storage presented to the hosts managed by different vCenter Server - questions?

  I currently have three hosts (esxi 5.0) that are managed by vcenter server 5.5 U2. The hosts are attached to iSCSI LUNS (data warehouses) 10.

  I'm migrating to esxi 6.0 U2. For this, there are three new hosts have esxi 6.0 installed and managed by vcenter server 6.0 U2 U2.

  The plan is to detach/remove 5.0 5.5 U2 vcenter esxi hosts. Then import it into vcenter 6.0 U2 (a new cluster will be created). Once imported, uninstall the 5.5 vcenter u2. Then turn off the resident VMs imported esxi 5 hosts and move them to 6.0 esxi hosts.

  My query is regarding regarding storage.

  At present, three new guests see all storage the old 5.0 esxi hosts to see (guests are not in the cluster. "I'm still trying to put things up). That's because the new hosts were deposited to the same group on the side iSCSI initiator storage. Now things, data warehouses are visible by the hosts with esxi 5.0 (managed by vcenter 5.5 u2) and also the esxi hosts 6.0 (managed by vcenter 6.0 u2). The only VMs residing in esxi environment 6 is vcenter 6.0 u2 and update manager 6.0 u2. These are in a data store that is not any other virtual machines.

  That's no problem during the migration? I have not created a cluster for the esxi 6.0 hosts yet and plan to do after obtaining your entries.

  Thank you!

  No problem whatsoever, regardless whether if you do or that you add no vSphere 6 hosts in a HA cluster.

  If you temporarily enable EVC on the vSphere hosts 6, once all hosts are connected to the same vCenter you can VMotion all VMs to new hosts even without any stop. Clear CVS once the migration is complete.

• can't see any partition of the disk after disk Sanitizer

  On my HP4530sPro is launched wrong Disk Sanitizer, and now when I try to install Windows7 OS (Linux Enterprise Desktop has been installed in the basic configuration), I don't see any partition of the disk. What to do.

  More compliments

  Your laptop is a company/business model. I would recommend this announcement in the HP Enterprise Support Forums for the best coverage, because it's the consumer support forums.
  
  You can access support at the following link enterprise forums.
  
  http://goo.GL/LsnuK

• Satellite U840-10N - Windows Installation can not see any drive

  Hi all, this is my first post so I hope that I chose the right place to post in.

  I just bought a new Toshiba Satellite u840-10n ultrabook. He joined WIndows 7 Home Premium 320 GB HHD + SSD of 32 GB.

  Even though I prefer Linux, I need Windows because of Microsoft Visual Studio. I downloaded Visual Studio (legally throught dreamspark.com), but it looks like it has some issues. In particular, I can't create any project.

  After searching the Web for this problem, I decided to try reinstalling Windows, hoping that this will solve the problem, and here's the point.

  Installation process of Windows 7 can not find any drive. I looked through the web a lot to solve this problem, even, without understanding.

  I read a lot of other people had the same problem. I tried different ways and I'm about to throw the laptop out the window.

  Is there anyone can help me?

  See you soon,.

  Marco Galassi

  You need to load the SATA driver before you start the installation of the OS. Try it please use the files from http://www.fileswap.com/dl/igfH0jVrap/

  I used it on my Win8 preinstalled satellite to install Win7 64 bit. Copy it to USB and install from there.
  Please post comments.

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• vCenter Server Questions

  Hello

  I'm trying to find some information on vCenter Server.

  With the latest version of VMWare vCenter is Server possible to manage all ESX or ESXi, guests including the free edition?

  We have a vCenter Server edition comes with a starter kit and can manage up to 3 guests. Can upgrade us this version to the standard edition to manage an unlimited number of hosts?

  Thanks for your help.

  You can manage the free version of ESXi assuming you have enough vCenter Agents for ESX (i).  The free version doesn't have the vCenter agent license.

  In addition, you can watch the Maximums of Configuration, there is no "unlimited", but you can manage a bit.

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_config_max.PDF

• Can't see any imported images, each selection will appear gray

  Just installed the LR3 software and updated to the latest version. I inserted the SD card with 12 photos (jpg and raw) in the card reader, but on LR3 screen I saw 12 gray rectangles. However, I imported the 12 pictures in a folder on the PC. Gray remained of rectangles. With other programes I can see and open images. I have mad a mistake? Y at - it a particular to setting? My camera is a LX5.

  Thanks for any help.

  If you can see your images to develop, but not in the library, your preview cache is broken. Delete it and rebuild your previews. This is the file ending with '.lrdata' who lives next to your catalog.

  If you can not see your images in two places, your monitor profile is corrupt. See here.

  HAL

• In the design of split window, I can't see any images or anything like that

  In the design of split window, I can't see images or anything, just a white area.
  
  When you go to the site, the page loads fine, I could see the image in the design window, so the code is good, but still it is not visible in the Dreamweaver design view. I need to be able to see this image and the page in the design side, so I can continue to work.
  
  Any suggestions?
  I looked through the forum and found a thread, but they said to check
  view > style rendering > display styles
  that is checked.
  
  Anything else? that anyone could think of to help?

  Okay, I think I got it. See in this post made me realize that I had the code

  
  
  

  in the wrong place. Thanks for making me understand my problems... ;-)

• ARD can not see remote clients via VPN

  Hi all. I found not been able to find an answer to what works. I appreciate the help.

  I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.

  The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.

  What Miss me? Thank you very much.

  for VPN works normally your networks must be in a different IP address ranges

  you have everything in 10.0.1 range

  for example the Office Network 10.0.1.xxx

  network servant 10.0.1.xx

  This is maybe the reason why you cannot control the machines.

  VPN requires the Remote LAN to be on a different subnet/ip range

  If they are no routing etc. can get screwed up like router/VPN cannot know where things are

  Try to change your home network to a range of ip address/subnet different example 192.168.1.xx

• HPDM: HPDM can't see any of my thin clients

  A few months ago, I set up a server HPDM on Win 2012r2 and light HP 12, mainly mt245 clients. I could see all the thin clients with HPDM, I even used it for the Image of each of them.

  Yesterday, I went to add a new abd mt245 the image. All TCs went from HPDM and it does not find it again. I tried to walk to the beach. I tried to manually add as well as at the foot of the range of the exact IP that the TC has to say things. I ping the TC from the server and vice versa.

  The Windows Firewall is turned off completely.

  Any thoughts?

  Thank you

  Travis

  Well. I thought about it. I forgot to click on the name of the gateway on the left. Stupid sound is not automatically select one on its own.

  Travis

• can not see any type of files, except that ICons.What of the software is the problem

  Now, I'm having this problem recently & is permanent, all file types are projected as empty case type instead of their respective icons. All installed software are shown with their respective icons. don't know how to solve this problem.

  Hello

  If I understand correctly you are facing the problem with all the icons on your Windows XP computer display even. I would like to know more information on the issue, so that we can help you better.

  1A the question started recently?

  2. do you get any error code or error message?

  3. have you made changes on the computer before this problem?

  4. which icon (third party software) programs are you referring? (Mention the name of the program)

  Let us try the following methods and check if it works for you.

  Method 1:

  Start in safe mode and check if the problem persists. Is the question do not persist in safe mode then put the computer in a clean boot state and check if there is no third party software/application causes this issue.

  Step 1: Start Windows XP in safe mode.

  A description of the start in Windows XP Mode options:

  http://support.Microsoft.com/kb/315222

  Step 2: How to configure Windows XP to start in a "clean boot" State:

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  Method 2:

  Run Microsoft Safety Scanner and check if there is any threat of viruses.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 3:

  If the problem started recently, then restore to a point when the computer was working fine.

  How to restore Windows XP to a previous state:

  http://support.Microsoft.com/kb/306084

  WARNING: System Restore does not affect personal files, such as e-mail messages, documents or photos. You can only restore files that you have deleted if you have made backups of these files.

  Please reply with the status of the issue, so that we can better help you.