VCloud org, VCDs, and network using VCO supply

Similar Questions

• HP Laserjet Pro 200: HP Laserjet Pro 200 - simultaneous USB and network use

  I would like to know if the printer above supports the use of simultaneous connections via USB connection or network? The printer is already set up as a USB printer to a computer, and I want to connect it to another host via network - is it possible to do without losing existing features, implemented through USB?

  Thanks a lot for your answer.

  HP is generally recommended not to connect the printer in this way, however, my experience is that it will work the way you want it to run.  Given that you use only on 2 sides of computers have several jobs interfere with the other probalby will never happen.

• Using networks, organization and network outdoor pools

  Hello

  I've been messing around all day trying to get this to work. Currently, we use LabManager and are now moving to vCloud Director.

  How we currently have LabManager to installation:

  The configuration is closed.

  The 192.168.0.20 configuration ip address range - 192.168.0.30 (these are static ip addresses, the machines use to communicate with each other)

  It is then natted to VLAN800 and 10.1.180.10 of the IP - 10.1.180.200 (this one ip pool, we use these IPS to RDP and connect to this configuration of our work desktop computers)

  This configuration is not accessible through the internet (public network)

  For some reason I can't get the same configuration in vCD. Y does it have any chance someoen could post some photos of what the external networks, organization and network pools should look like for installation. I tried every combination I can think but he can't get the works.

  Help, please!

  Thank you!

  Hello

  The tab system-> cloud resources (left menu)-> organization VDC (left menu)-> 'your ORG name' - right click-> network Pool tab

  You have selected your network pool here?

• This program is best used to create custom, forms to say double surveys and networks, etc.

  This program is best used to create custom, forms to say double surveys and networks, etc.

  http://answers.Microsoft.com/en-us/Office

• 1V - 5v linear output using power supply 5v, voltage divider, and variable resistance

  How can I get 1v - 5v output linear using power supply 5v, voltage divider, and variable resistance?

  Have the you wired as an attachment?  Using my schema, you can calculate the current flowing through the pot based on the fall of the tension in the pot

  4V / 10Kohm = 0.0004

  Kirchhoff's current law, we know that the same current flows through the circuit so now we can calculate the leg below the wall, based on the current and the fall of desired voltage across the resistance

  1V / 0.0004 A = 2.5 K Ohm

  My scheme maintains the current flowing through the circuit of constant, so the voltage divider must never change.  Assuming a linear pot, you will get a swing of such linear voltage as measured at the wiper.  If you wired the pot, a different way, then more then likely, you change the total resistance of 5V ground that would have the common effect that would effect the tensions.

• Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it h

  Hello.. I'm from the programming, but new to actionscript. I would like to ask if there was a library where all built in functions, methods, and events can be searched. As for VB, MSDN (of Microsoft Developer Network) used to be there. More than once it happens that I write a few lines of code, but a built-in function already exists for the same thing. Is there a way to check it out ahead of time?

  An online resource are QAnywhere® to Adobe ActionScript 3 (AS3)

• Migration of virtual machines to vCD and again in a standard ESXi cluster itself?

  We currently have a relatively small cluster of ESXi (5.0.0 1489271) which uses a dedicated installation vCenter (5.0.0 1300600) and an instance of vCD (vCD 5.1.2.1068441).  Our goal is to move the virtual machines running in this configuration to our standard ESXi clusters (5.5.0 1892794) supported by installation of different vCenter (5.5.0 1891313).

  The instance of vCD seems to add additional parameters to the level of the virtual machine that prevents the VM of to be easily transferred out of the instance of vCD.  What we are looking for is a way to easily migrate these servers on and completely remove the vCD of the equation.  The only details around that we found cause downtime for exports out of vCD can be extended to reason the total amount of drive to the VM and VM level, which we really do not think it is an option to open a window of time to stop long enough to work through this process.

  Did someone went down this road before?  We have approximately 120 virtual machines in the cluster vCD using about 52 TB of disk.

  Maybe we're wrong understand something fundamental about the nature of migration of VMs on the vCD instance, but we have not been able to find many details on what options exist to make this move.  We have spoken several times with VMware support in this regard.  They mentioned a potential tool in the work within engineering migrate vCD to vCAC (which isn't really fall under our goal unless vCAC would then provide a clear path to return the virtual machines to a standard ESXi cluster).

  Any suggestions or ideas are appreciated.

  I am a colleague of GTC and wanted to just sent to our discussion of this topic with the help of VMware.  Basically, we should be able to Setup VMs in vCenter, outside of vCloud Director, pointing them to the same files VMDK and MAC then power off VM vCD and power on VM vCenter.

  : The NASA-EAST region

  Moment of validation: 2014-09-05 11:32 EDT

  Severity of the request for assistance: 4 - low

  Description of the request for assistance: we are looking for ways simple and less disruptive migrate VMS off vCloud Director and vCenter management.

  We have the advantage of a single principle in vCloud, managed by a vCenter and the network configuration is simple with no VXLAN.

  What are the problems with the realization of the following?

  vCD 5.1 is managed by vCenter 5.0, the final result will move VMs in vCenter even

  -Create a new virtual machine in vCenter that points to the same vmdk files as virtual machine in vCD you want to migrate, allocate same configurations of processor, memory, and network (we do not use the vCD with advanced networking)

  -Turning off the virtual computer in vCD

  -Once the vCD WHAT VM is off, power on VM in vCenter

  We must ensure that the VM vCD never gets turned on again and then when we are completely finished with all migrations of VMS in vCenter we abandon vCD.

  Of course there are details to help users migrate to how they use the vCD to vSphere vCenter client web interface or web interface.

  Entry date: 04/09/2014

  Since the opening of the case, I had interviews with several members of VMware support staff and these additional points were added.

  -Configure vCenter VM with the same vNIC driver MAC and like vCD VM vNIC

  -Rename VMDK files to make for easier management, or if not renamed then detach from the propelled out of vCD VM

• VCloud NAT between the networks

  Is it possible to use a deployment ended the NAT IP addresses between networks vCloud?

  Let's say I have two networks defined - a network inherited from Direct Connect using 192.168.63.0/24 and a new internal network using 192.168.10.0/24 vCloud.  I want to take VMs that existed before my vCloud Director deployment that ont.63 addresses and rely on eachother for the functionality of the application and place it under vCloud Director control.  Then I want to capture them in a paralytic, publish it on my catalog, then have the users to be able to deploy a copy closed vapp, but with adresses.10 as their NATted addresses, but retain their old adresses.63 inside the fence.

  I see no way to set a different network for NAT closing than anything he can scrounge off the vDC Org chosen network in the first place for virtual machines.  Anyone has any ideas or know of a way I can get things settled without having to re - IP all my legacy servers?

  You may not use closure for this. Either give each TIME a routed net VAPP or the NAT make ' ing to the gateway

• NetCut! A person is to destroy my network using this software.

  Someone is using netcut in my network where I am providing internet service to about 100 computers via local network.

  Please help me the person using this software, disconnects from my clients on the internet and if receive so many complaints.

  There must be a protection in windows xp that a client may not be able to cut off the internet from another customer who is possible by NETCUT

  Help, please...

  It is more than a network rather than a problem of Windows problem, so what is important here is the architecture of your network.  NetCut works using ARP Spoofing.  The article of Wikipedia on ARP spoofing lists some defenses against this attack
     < >http://en.Wikipedia.org/wiki/ARP_spoofing >
  In the end, you have to discover what machine generates the attack, then remove them from the network.  Anti-Netcut claims on their website to be able to identify the source of the attack (although I've never used this software).  The routers that you use can make this easy or difficult the solution will be more likely to boil down to use a packet capture/display as freewareWireshark program to empty ARP packets on your screen while you disconnect the legs of your network in order to narrow down on its source.  If Anti-Netcut identifies the MAC address of the attacker and you use professional quality routers/switches, you can connect to the administration on your router/switch page and discover the address connected to the port and from there.  If it's random.

  HTH,
  JW

• help with bulk - update script vcloud Org

  Hi all

  I need to update the following script to edit only all VMs in a single body... I don't want to touch to all environments...

  ForEach ($vm in (Get - VM)) {}

  $vmv = get - VM $vm | Get-View

  $name = $vmv. Name

  $guestid = $vmv. Summary.Config.GuestId

  $vmx = new-Object VMware.Vim.VirtualMachineConfigSpec

  $vmx.extraConfig += new-Object VMware.Vim.OptionValue

  $vmx.extraConfig [0] .key = "monitor_control.enable_softResetClearTSC."

  $vmx.extraConfig [0] .value = 'TRUE '.

  If ($guestid - like ' windows8 * Guest ') {}

  ($vmv). ReconfigVM_Task ($vmx)

  }

  }

  When I connect to the specified by connect-ciserver-Server xxxx - Org Org MyOrg and test, it tells me:

  Get - VM: 09/05/2016 15:40 Get - VM you are not currently connected

  on all servers. Sign in first with a cmdlet Connect.

  C:\scripts\TSCClear.ps1:1 char: 18

  + ForEach ($vm in (Get - VM)) {}

  +                  ~~~~~~

  + CategoryInfo: ResourceUnavailable: (:)) [Get - VM], ViServerConne)

  ctionException

  + FullyQualifiedErrorId: Core_BaseCmdlet_NotConnectedError, VMware.VimAuto

  mation.ViCore.Cmdlets.Commands.GetVM

  Not a script guru here, just trying to see if I can make this work in an Org with some modifications

  You get the error message because the cmdlet Get - VM work, you must be connected to a vCenter server. For the ReconfigVM_Task() method, you must be connected to a server vCenter as well. The following PowerCLI script connects to both a vCloud Director Server and vCenter server. The script uses the cmdlet Get-CIVM to recover virtual machines in the organization. Because the VirtualmachineConfigSpec is the same for each virtual machine, I took it out of the loop to make the script run faster.

  $Organization = 'MyOrg ".

  $CIServer = "vCloudDirectorServer".

  $VIServer = "vCenterServer".

  Connect-CIServer-Server $CIServer

  SE connect-VIServer-Server $VIServer

  $vmx = new-Object VMware.Vim.VirtualMachineConfigSpec

  $vmx.extraConfig += new-Object VMware.Vim.OptionValue

  $vmx.extraConfig [0] .key = "monitor_control.enable_softResetClearTSC."

  $vmx.extraConfig [0] .value = 'TRUE '.

  ForEach ($vmv in (Get-View - RelatedObject (Get-CIVM - Org $Organization). ExtensionData)) {}

  $name = $vmv. Name

  $guestid = $vmv. Summary.Config.GuestId

  If ($guestid - like ' windows8 * Guest ') {}

  ($vmv). ReconfigVM_Task ($vmx)

  }

  }

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help

• "Another device on the network use my ip address".

  I tried to check my mail and could not and got this message "another device on the network use the IP address of your computer." I have never seen it before. He also said that I could change the IP address, if I continued to have problems. I bought this iMac and used Migration to transfer all the stuff from my old iMac that is still used. That was months ago, but I never had this message up to now. So should I change one of the IP addresses? And if so, how is that done?

  http://osxdaily.com/2010/09/19/another-device-on-the-network-is-using-your-Compu ters-ip-address.

• iPhone 6 more issues activation and network on the latest iOS 9.3.2

  I have an iPhone 6 it is having problems with Activation and networking connectivity. I activated via iTunes and updated to the latest iOS 9.3.2 this morning. The phone remain active for a period of time and then come back to need activation.

  Using WiFi it is full bars but no connection. I'm typing this from my iPad on the same WiFi connection, so not the network. If I turn off WiFi and cell there still no connection. The phone will receive calls (even when stuck in the activation state) and can make calls after you have enabled from iTunes.  She was released a couple of times, but always the same question.

  I tried to erase and reload from iTunes to the top, but the restore function requires that find my iPhone service shut down on the phone and this step requires access to complete network.

  Try the following steps:

  • Try connecting your device to your computer and launch iTunes. Choose your device and click on summary > update.
  • If this does not work, make sure you have the latest version of iTunes installed on your computer and restart your computer.
  • When it restarts load iTunes and try to select your device and click on summary > update again.
  • If this does not work, it's time to try a restore. Press and hold the sleep/wake and home buttons on your iPad or your iPhone until iTunes gives you the option to restore your device.
  • When it's over, you can restore a backup, and you should be good to go with 9.3 running iOS.

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.